← Commit history

Initial commit: component/pic24fj32ga002t-i

Ray ·c1b63f01a6 ·
2 files changed +109
README.mdadded+75
@@ -0,0 +1,75 @@+# PIC24FJ32GA002T-I++**Microchip Tech** · Microcontrollers (MCU/MPU/SOC) · SSOP-28-208mil++PIC24FJ32GA002T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MCLR | input | Master Clear (device Reset) input, active-low. Drive low to force a device Reset. Typically pulled to VDD through a 10 kΩ resistor with an optional ICSP programming cable connection. |+| 2 | AN0/VREF+/CN2/RA0 | bidirectional | PORTA digital I/O RA0. Multiplexed with A/D analog input AN0, positive A/D and comparator reference VREF+, and Interrupt-on-Change input CN2. Schmitt-trigger digital input; analog level input/output when analog function selected. |+| 3 | AN1/VREF-/CN3/RA1 | bidirectional | PORTA digital I/O RA1. Multiplexed with A/D analog input AN1, negative A/D and comparator reference VREF-, and Interrupt-on-Change input CN3. |+| 4 | PGED1/AN2/C2IN-/RP0/CN4/RB0 | bidirectional | PORTB digital I/O RB0. Multiplexed with ICSP/ICD Programming Data channel 1 (PGED1), A/D input AN2, comparator 2 negative input C2IN-, Remappable Peripheral RP0, and Interrupt-on-Change CN4. |+| 5 | PGEC1/AN3/C2IN+/RP1/CN5/RB1 | bidirectional | PORTB digital I/O RB1. Multiplexed with ICSP/ICD Programming Clock channel 1 (PGEC1), A/D input AN3, comparator 2 positive input C2IN+, Remappable Peripheral RP1, and Interrupt-on-Change CN5. |+| 6 | AN4/C1IN-/SDA2/RP2/CN6/RB2 | bidirectional | PORTB digital I/O RB2. Multiplexed with A/D input AN4, comparator 1 negative input C1IN-, alternate I2C2 data SDA2, Remappable Peripheral RP2, and Interrupt-on-Change CN6. |+| 7 | AN5/C1IN+/SCL2/RP3/CN7/RB3 | bidirectional | PORTB digital I/O RB3. Multiplexed with A/D input AN5, comparator 1 positive input C1IN+, alternate I2C2 clock SCL2, Remappable Peripheral RP3, and Interrupt-on-Change CN7. |+| 8 | VSS | power_in | Ground reference for logic and I/O pins. Connect to system ground with low-inductance decoupling. |+| 9 | OSCI/CLKI/CN30/RA2 | bidirectional | PORTA digital I/O RA2. Alternate function: primary oscillator crystal input OSCI or external clock input CLKI; also Interrupt-on-Change CN30. Analog buffer when clock function is selected. |+| 10 | OSCO/CLKO/PMA0/CN29/RA3 | bidirectional | PORTA digital I/O RA3. Alternate function: primary oscillator output OSCO or divided system clock output CLKO; also Parallel Master Port address bit 0 (PMA0) and Interrupt-on-Change CN29. |+| 11 | SOSCI/RP4/PMBE/CN1/RB4 | bidirectional | PORTB digital I/O RB4. Multiplexed with Secondary Oscillator/Timer1 input SOSCI, Remappable Peripheral RP4, PMP byte enable strobe PMBE, and Interrupt-on-Change CN1. |+| 12 | SOSCO/T1CK/CN0/PMA1/RA4 | bidirectional | PORTA digital I/O RA4. Multiplexed with Secondary Oscillator/Timer1 output SOSCO, Timer1 external clock input T1CK, PMP address bit 1 (PMA1), and Interrupt-on-Change CN0. |+| 13 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. Operating range 2.0V to 3.6V. Decouple with 0.1 µF ceramic per VDD pin. |+| 14 | PGED3/ASDA1/RP5/CN27/PMD7/RB5 | bidirectional | PORTB digital I/O RB5. Multiplexed with ICSP Programming Data channel 3 (PGED3), alternate I2C1 data ASDA1, Remappable Peripheral RP5, PMP data bit 7 (PMD7), and Interrupt-on-Change CN27. |+| 15 | PGEC3/ASCL1/RP6/CN24/PMD6/RB6 | bidirectional | PORTB digital I/O RB6. Multiplexed with ICSP Programming Clock channel 3 (PGEC3), alternate I2C1 clock ASCL1, Remappable Peripheral RP6, PMP data bit 6 (PMD6), and Interrupt-on-Change CN24. |+| 16 | INT0/RP7/CN23/PMD5/RB7 | bidirectional | PORTB digital I/O RB7. Multiplexed with external interrupt INT0, Remappable Peripheral RP7, PMP data bit 5 (PMD5), and Interrupt-on-Change CN23. |+| 17 | TCK/SCL1/RP8/CN22/PMD4/RB8 | bidirectional | PORTB digital I/O RB8. Multiplexed with JTAG Test Clock (TCK), primary I2C1 clock SCL1, Remappable Peripheral RP8, PMP data bit 4 (PMD4), and Interrupt-on-Change CN22. |+| 18 | TDO/SDA1/RP9/CN21/PMD3/RB9 | bidirectional | PORTB digital I/O RB9. Multiplexed with JTAG Test Data Output (TDO), primary I2C1 data SDA1, Remappable Peripheral RP9, PMP data bit 3 (PMD3), and Interrupt-on-Change CN21. |+| 19 | DISVREG | input | Voltage Regulator Disable input. Tie to VSS to enable the on-chip 2.5V core regulator (VDD 2.5V-3.6V); tie to VDD to disable the regulator when VDD is at core voltage (2.0V-2.75V, apply VDDCORE externally to pin 20). |+| 20 | VCAP/VDDCORE | power_in | Core logic supply. With on-chip regulator enabled (DISVREG=0): connect a 10 µF low-ESR filter capacitor to VSS. With regulator disabled (DISVREG=1): apply external core supply (typically 2.5V) to this pin. |+| 21 | PGED2/TDI/RP10/CN16/PMD2/RB10 | bidirectional | PORTB digital I/O RB10. Multiplexed with ICSP Programming Data channel 2 (PGED2), JTAG Test Data Input (TDI), Remappable Peripheral RP10, PMP data bit 2 (PMD2), and Interrupt-on-Change CN16. |+| 22 | PGEC2/TMS/RP11/CN15/PMD1/RB11 | bidirectional | PORTB digital I/O RB11. Multiplexed with ICSP Programming Clock channel 2 (PGEC2), JTAG Test Mode Select (TMS), Remappable Peripheral RP11, PMP data bit 1 (PMD1), and Interrupt-on-Change CN15. |+| 23 | AN12/RP12/CN14/PMD0/RB12 | bidirectional | PORTB digital I/O RB12. Multiplexed with A/D input AN12, Remappable Peripheral RP12, PMP data bit 0 (PMD0), and Interrupt-on-Change CN14. |+| 24 | AN11/RP13/CN13/PMRD/RB13 | bidirectional | PORTB digital I/O RB13. Multiplexed with A/D input AN11, Remappable Peripheral RP13, PMP Read Strobe (PMRD), and Interrupt-on-Change CN13. |+| 25 | AN10/CVREF/RTCC/RP14/CN12/PMWR/RB14 | bidirectional | PORTB digital I/O RB14. Multiplexed with A/D input AN10, Comparator Voltage Reference output CVREF, Real-Time Clock/Calendar alarm output RTCC, Remappable Peripheral RP14, PMP Write Strobe (PMWR), and Interrupt-on-Change CN12. |+| 26 | AN9/RP15/CN11/PMCS1/RB15 | bidirectional | PORTB digital I/O RB15. Multiplexed with A/D input AN9, Remappable Peripheral RP15, PMP Chip Select 1 / Address bit 14 (PMCS1), and Interrupt-on-Change CN11. |+| 27 | VSS | power_in | Ground reference for logic and I/O pins. Second VSS pin on the 28-pin package; tie to the same ground plane as pin 8. |+| 28 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. Second VDD pin on the 28-pin package; decouple with 0.1 µF ceramic close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | SSOP-28-208mil |+| Category | Embedded Processors & Controllers |+| Pins | 28 |++## Ordering variants++Same part, different packaging or reel option.++- `PIC24FJ32GA002T-II/SP`+- `PIC24FJ32GA002T-I/SS`+- `PIC24FJ32GA002T-II/SS`+- `PIC24FJ32GA002T-I/SO`+- `PIC24FJ32GA002T-II/SO`+- `PIC24FJ32GA002T-I/ML`+- `PIC24FJ32GA002T-II/ML`++## CAD (KiCad official)++- Symbol: `PIC24FJ32GA002T-I`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586203563790254080) (278 pp, sha256 `67fd2ef41e1a2d3f`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pic24fj32ga002t-i-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "pic24fj32ga002t-i",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip Tech Microcontrollers (MCU/MPU/SOC), SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "pic24fj32ga002t-i"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pic24fj32ga002t-i.kicad_sym",+    "pic24fj32ga002t-i.kicad_mod",+    "pic24fj32ga002t-i.glb",+    "pic24fj32ga002t-i.step",+    "pic24fj32ga002t-i.lbr",+    "docs/hero.png",+    "docs/pic24fj32ga002t-i-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file