← Commit history
Publish 0.1.2
8 files changed
+1681−1614
README.md+47−62@@ -8,54 +8,54 @@ PIC24FJ128GA705T-I from Microchip Tech, in a UQFN-48-EP(6x6). Pinout and pin des | Pin | Name | Type | Function | |---|---|---|---|-| 1 | C1INC/C2INC/C3INC/TMPRN/RP9/SDA1/T1CK/CTED4/PMD3/RB9 | bidirectional | PORTB digital I/O RB9 (DIG/ST) shared with comparator inputs, Timer1 clock, I2C1 SDA1, tamper input and PMP data; it tolerates input voltages only up to VDD (Table 11-2). |-| 2 | RP22/PMA1/PMALH/RC6 | bidirectional | PORTC digital I/O RC6 (DIG/ST) shared with remappable pin RP22 and EPMP address/strobe functions; it tolerates inputs up to 5.5V (Table 11-2). |-| 3 | RP23/PMA0/PMALL/RC7 | bidirectional | PORTC digital I/O RC7 (DIG/ST) shared with remappable pin RP23 and EPMP address/strobe functions; it tolerates inputs up to 5.5V (Table 11-2). |-| 4 | RP24/PMA5/RC8 | bidirectional | PORTC digital I/O RC8 (DIG/ST) shared with remappable pin RP24 and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2). |-| 5 | RP25/CTED7/PMA6/RC9 | bidirectional | PORTC digital I/O RC9 (DIG/ST) shared with remappable pin RP25, CTMU edge input and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2). |+| 1 | RB9 | bidirectional | PORTB digital I/O RB9 with Schmitt-trigger input, multiplexed with comparator, tamper, I2C1 SDA1 and Timer1 clock functions, and tolerates input levels only up to VDD. |+| 2 | RC6 | bidirectional | PORTC digital I/O RC6 with Schmitt-trigger input, remappable as RP22 and shared with Parallel Master Port address/latch function, and tolerates input levels up to 5.5V. |+| 3 | RC7 | bidirectional | PORTC digital I/O RC7 with Schmitt-trigger input, remappable as RP23 and shared with Parallel Master Port address/latch function, and tolerates input levels up to 5.5V. |+| 4 | RC8 | bidirectional | PORTC digital I/O RC8 with Schmitt-trigger input, remappable as RP24 and shared with Parallel Master Port address function, and tolerates input levels up to 5.5V. |+| 5 | RC9 | bidirectional | PORTC digital I/O RC9 with Schmitt-trigger input, remappable as RP25 and shared with CTMU edge input and Parallel Master Port address function, and tolerates input levels up to 5.5V. | | 6 | VSS | power_in | Ground reference for peripheral digital logic and I/O pins. |-| 7 | VCAP | passive | External filter capacitor connection for the on-chip voltage regulator (regulator enabled); it requires a 10 µF capacitor to ground with ESR below 5 Ω and must not be connected to VDD (Section 2.4). |-| 8 | RPI29/RA11 | bidirectional | PORTA digital I/O RA11 (DIG/ST) shared with input-only remappable pin RPI29; it tolerates inputs up to 5.5V (Table 11-2). |-| 9 | PGD2/RP10/OCM1C/CTED11/PMD2/RB10 | bidirectional | PORTB digital I/O RB10 (DIG/ST) shared with ICSP data PGD2, remappable pin RP10 and MCCP1 output OCM1C; it tolerates inputs up to 5.5V (Table 11-2). |-| 10 | PGC2/REFI1/RP11/CTED9/PMD1/RB11 | bidirectional | PORTB digital I/O RB11 (DIG/ST) shared with ICSP clock PGC2, REFI1 and remappable pin RP11; it tolerates inputs up to 5.5V (Table 11-2). |-| 11 | AN8/LVDIN/RP12/PMD0/RB12 | bidirectional | PORTB digital I/O RB12 (DIG/ST) shared with A/D input AN8, LVD input LVDIN and remappable pin RP12; it tolerates inputs up to 5.5V (Table 11-2). |-| 12 | AN7/C1INC/RP13/OCM1D/CTPLS/PMRD/PMWR/RB13 | bidirectional | PORTB digital I/O RB13 (DIG/ST) shared with A/D input AN7, comparator input C1INC and CTMU pulse output CTPLS; it tolerates inputs up to 5.5V (Table 11-2). |-| 13 | TMS/RP28/PMA2/PMALU/RA10 | bidirectional | PORTA digital I/O RA10 (DIG/ST) shared with JTAG test mode select TMS input and remappable pin RP28; it tolerates inputs up to 5.5V (Table 11-2). |-| 14 | TCK/PMA7/RA7 | bidirectional | PORTA digital I/O RA7 (DIG/ST) shared with JTAG test clock TCK input and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2). |-| 15 | CVREF/AN6/C3INB/RP14/CTED5/PMWR/PMENB/RB14 | bidirectional | PORTB digital I/O RB14 (DIG/ST) shared with comparator voltage reference output CVREF, A/D input AN6 and remappable pin RP14; it tolerates only VDD (Table 11-2). |-| 16 | AN9/C3INA/RP15/CTED6/PMA14/PMCS/PMCS1/RB15 | bidirectional | PORTB digital I/O RB15 (DIG/ST) shared with A/D input AN9, comparator input C3INA and remappable pin RP15; it tolerates only VDD (Table 11-2). |-| 17 | AVSS | power_in | Ground reference for analog modules; it must always be connected regardless of whether analog modules are used (Section 2.1). |-| 18 | AVDD | power_in | Positive supply for analog modules; it must always be connected regardless of whether analog modules are used (Section 2.1). |-| 19 | MCLR | input | Master Clear input (ST); bringing this line low causes a device Reset, with VIH minimum 0.8 VDD and VIL maximum 0.2 VDD (Table 32-8). |-| 20 | RPI30/RA12 | bidirectional | PORTA digital I/O RA12 (DIG/ST) shared with input-only remappable pin RPI30; it tolerates inputs up to 5.5V (Table 11-2). |-| 21 | VREF+/CVREF+/AN0/C3INC/RP26/CTED1/RA0 | power_in | PORTA digital I/O RA0 (DIG/ST) shared with the positive voltage reference input VREF+, A/D input AN0 and remappable pin RP26; it tolerates inputs up to 5.5V (Table 11-2). |-| 22 | VREF-/CVREF-/AN1/C3IND/RP27/CTED2/RA1 | power_in | PORTA digital I/O RA1 (DIG/ST) shared with the negative voltage reference input VREF-, A/D input AN1 and remappable pin RP27; it tolerates inputs up to 5.5V (Table 11-2). |-| 23 | PGD1/AN2/CTCMP/C2INB/RP0/RB0 | bidirectional | PORTB digital I/O RB0 (DIG/ST) shared with ICSP data PGD1, A/D input AN2 and remappable pin RP0; it tolerates only VDD (Table 11-2). |-| 24 | PGC1/AN1-/AN3/C2INA/RP1/CTED12/RB1 | bidirectional | PORTB digital I/O RB1 (DIG/ST) shared with ICSP clock PGC1, A/D input AN3 and remappable pin RP1; it tolerates only VDD (Table 11-2). |-| 25 | AN4/C1INB/RP2/SDA2/CTED13/RB2 | bidirectional | PORTB digital I/O RB2 (DIG/ST) shared with A/D input AN4, comparator input C1INB, I2C2 SDA2 and remappable pin RP2; it tolerates only VDD (Table 11-2). |-| 26 | AN5/C1INA/RP3/SCL2/CTED8/RB3 | bidirectional | PORTB digital I/O RB3 (DIG/ST) shared with A/D input AN5, comparator input C1INA, I2C2 SCL2 and remappable pin RP3; it tolerates only VDD (Table 11-2). |-| 27 | AN10/RP16/PMBE1/RC0 | bidirectional | PORTC digital I/O RC0 (DIG/ST) shared with A/D input AN10 and remappable pin RP16; it tolerates only VDD (Table 11-2). |-| 28 | AN11/RP17/PMA15/PMCS2/RC1 | bidirectional | PORTC digital I/O RC1 (DIG/ST) shared with A/D input AN11 and remappable pin RP17; it tolerates only VDD (Table 11-2). |-| 29 | AN12/RP18/PMACK1/RC2 | bidirectional | PORTC digital I/O RC2 (DIG/ST) shared with A/D input AN12 and remappable pin RP18; it tolerates only VDD (Table 11-2). |-| 30 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; the device operating supply range is 2.0V to 3.6V. |+| 7 | VCAP | passive | External filter capacitor connection for the on-chip voltage regulator (regulator enabled), which requires a 10 µF capacitor to ground with ESR below 5 Ω and must not be connected to VDD. |+| 8 | RA11 | bidirectional | PORTA digital I/O RA11 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI29. |+| 9 | RB10 | bidirectional | PORTB digital I/O RB10 with Schmitt-trigger input, used as ICSP data pin PGD2 and tolerates input levels up to 5.5V. |+| 10 | RB11 | bidirectional | PORTB digital I/O RB11 with Schmitt-trigger input, used as ICSP clock pin PGC2 and tolerates input levels up to 5.5V. |+| 11 | RB12 | bidirectional | PORTB digital I/O RB12 with analog input AN8 and LVD input LVDIN, tolerates input levels only up to VDD. |+| 12 | RB13 | bidirectional | PORTB digital I/O RB13 with analog input AN7, tolerates input levels only up to VDD, and is shared with CTMU pulse output CTPLS. |+| 13 | RA10 | bidirectional | PORTA digital I/O RA10 with Schmitt-trigger input, used as JTAG TMS input function, tolerates input levels up to 5.5V. |+| 14 | RA7 | bidirectional | PORTA digital I/O RA7 with Schmitt-trigger input, used as JTAG TCK input function, tolerates input levels up to 5.5V. |+| 15 | RB14 | bidirectional | PORTB digital I/O RB14 with analog input AN6 and comparator voltage reference output CVREF, tolerates input levels only up to VDD. |+| 16 | RB15 | bidirectional | PORTB digital I/O RB15 with analog input AN9, tolerates input levels only up to VDD. |+| 17 | AVSS | power_in | Ground reference for analog modules, which must always be connected regardless of whether analog features are used. |+| 18 | AVDD | power_in | Positive supply for analog modules, which must always be connected regardless of whether analog features are used. |+| 19 | MCLR | input | Master Clear input that when brought low causes a device Reset, with VIL maximum of 0.2 VDD and VIH minimum of 0.8 VDD. |+| 20 | RA12 | bidirectional | PORTA digital I/O RA12 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI30. |+| 21 | RA0 | bidirectional | PORTA digital I/O RA0 with analog input AN0 and high-side reference input VREF+, tolerates input levels up to 5.5V. |+| 22 | RA1 | bidirectional | PORTA digital I/O RA1 with analog input AN1 and low-side reference input VREF-, tolerates input levels up to 5.5V. |+| 23 | RB0 | bidirectional | PORTB digital I/O RB0 used as ICSP data pin PGD1 and analog input AN2, tolerates input levels only up to VDD. |+| 24 | RB1 | bidirectional | PORTB digital I/O RB1 used as ICSP clock pin PGC1 and analog inputs AN1- and AN3, tolerates input levels only up to VDD. |+| 25 | RB2 | bidirectional | PORTB digital I/O RB2 with analog input AN4 and I2C2 data SDA2, tolerates input levels only up to VDD. |+| 26 | RB3 | bidirectional | PORTB digital I/O RB3 with analog input AN5 and I2C2 clock SCL2, tolerates input levels only up to VDD. |+| 27 | RC0 | bidirectional | PORTC digital I/O RC0 with analog input AN10, tolerates input levels only up to VDD. |+| 28 | RC1 | bidirectional | PORTC digital I/O RC1 with analog input AN11, tolerates input levels only up to VDD. |+| 29 | RC2 | bidirectional | PORTC digital I/O RC2 with analog input AN12, tolerates input levels only up to VDD. |+| 30 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins, with a family operating range of 2.0V to 3.6V. | | 31 | VSS | power_in | Ground reference for peripheral digital logic and I/O pins. |-| 32 | RPI31/RA13 | bidirectional | PORTA digital I/O RA13 (DIG/ST) shared with input-only remappable pin RPI31; it tolerates inputs up to 5.5V (Table 11-2). |-| 33 | OSCI/CLKI/C1IND/RA2 | bidirectional | PORTA digital I/O RA2 (DIG/ST) shared with the main oscillator/clock input OSCI/CLKI and comparator input C1IND; it tolerates inputs up to 5.5V (Table 11-2). |-| 34 | OSCO/CLKO/C2IND/RA3 | bidirectional | PORTA digital I/O RA3 (DIG/ST) shared with the main oscillator output OSCO/CLKO (system clock output) and comparator input C2IND; it tolerates inputs up to 5.5V (Table 11-2). |-| 35 | TDO/PMA8/RA8 | bidirectional | PORTA digital I/O RA8 (DIG/ST) shared with JTAG test data output TDO and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2). |-| 36 | SOSCI/RP4/RB4 | bidirectional | PORTB digital I/O RB4 (DIG/ST) shared with secondary oscillator/Timer1 clock input SOSCI and remappable pin RP4; it tolerates only VDD (Table 11-2). |-| 37 | SOSCO/PWRLCLK/RA4 | bidirectional | PORTA digital I/O RA4 (DIG/ST) shared with secondary oscillator/Timer1 clock output SOSCO and the RTCC 50/60 Hz clock input PWRLCLK; it tolerates inputs up to 5.5V (Table 11-2). |-| 38 | TDI/PMA9/RA9 | bidirectional | PORTA digital I/O RA9 (DIG/ST) shared with JTAG test data input TDI and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2). |-| 39 | AN13/RP19/PMBE0/RC3 | bidirectional | PORTC digital I/O RC3 (DIG/ST) shared with A/D input AN13 and remappable pin RP19; it tolerates only VDD (Table 11-2). |-| 40 | RP20/PMA4/RC4 | bidirectional | PORTC digital I/O RC4 (DIG/ST) shared with remappable pin RP20 and EPMP address function; it tolerates only VDD (Table 11-2). |-| 41 | RP21/PMA3/RC5 | bidirectional | PORTC digital I/O RC5 (DIG/ST) shared with remappable pin RP21 and EPMP address function; it tolerates only VDD (Table 11-2). |+| 32 | RA13 | bidirectional | PORTA digital I/O RA13 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI31. |+| 33 | RA2 | bidirectional | PORTA digital I/O RA2 with Schmitt-trigger input, tolerates input levels up to 5.5V, and is shared with the primary oscillator/clock input OSCI/CLKI. |+| 34 | RA3 | bidirectional | PORTA digital I/O RA3 with Schmitt-trigger input, tolerates input levels up to 5.5V, and is shared with the primary oscillator output OSCO/CLKO. |+| 35 | RA8 | bidirectional | PORTA digital I/O RA8 with Schmitt-trigger input, tolerates input levels up to 5.5V, and is shared with JTAG data output TDO. |+| 36 | RB4 | bidirectional | PORTB digital I/O RB4 with Schmitt-trigger input, shared with secondary oscillator/Timer1 clock input SOSCI, tolerates input levels only up to VDD. |+| 37 | RA4 | bidirectional | PORTA digital I/O RA4 with Schmitt-trigger input, shared with secondary oscillator output SOSCO and RTC 50/60 Hz input PWRLCLK, tolerates input levels up to 5.5V. |+| 38 | RA9 | bidirectional | PORTA digital I/O RA9 with Schmitt-trigger input, used as JTAG data input TDI, tolerates input levels up to 5.5V. |+| 39 | RC3 | bidirectional | PORTC digital I/O RC3 with analog input AN13, tolerates input levels only up to VDD. |+| 40 | RC4 | bidirectional | PORTC digital I/O RC4 with Schmitt-trigger input, remappable as RP20, tolerates input levels only up to VDD. |+| 41 | RC5 | bidirectional | PORTC digital I/O RC5 with Schmitt-trigger input, remappable as RP21, tolerates input levels only up to VDD. | | 42 | VSS | power_in | Ground reference for peripheral digital logic and I/O pins. |-| 43 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins; the device operating supply range is 2.0V to 3.6V. |-| 44 | RPI32/RA14 | bidirectional | PORTA digital I/O RA14 (DIG/ST) shared with input-only remappable pin RPI32; it tolerates inputs up to 5.5V (Table 11-2). |-| 45 | PGD3/RP5/ASDA1/OCM1E/PMD7/RB5 | bidirectional | PORTB digital I/O RB5 (DIG/ST) shared with ICSP data PGD3, remappable pin RP5 and alternate I2C1 data ASDA1; it tolerates inputs up to 5.5V (Table 11-2). |-| 46 | PGC3/RP6/ASCL1/OCM1F/PMD6/RB6 | bidirectional | PORTB digital I/O RB6 (DIG/ST) shared with ICSP clock PGC3, remappable pin RP6 and alternate I2C1 clock ASCL1; it tolerates inputs up to 5.5V (Table 11-2). |-| 47 | RP7/OCM1A/CTED3/PMD5/INT0/RB7 | bidirectional | PORTB digital I/O RB7 (DIG/ST) shared with remappable pin RP7, MCCP1 output OCM1A and external interrupt INT0; it tolerates inputs up to 5.5V (Table 11-2). |-| 48 | RP8/SCL1/OCM1B/CTED10/PMD4/RB8 | bidirectional | PORTB digital I/O RB8 (DIG/ST) shared with remappable pin RP8, I2C1 clock SCL1 and MCCP1 output OCM1B; it tolerates inputs up to 5.5V (Table 11-2). |+| 43 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins, with a family operating range of 2.0V to 3.6V. |+| 44 | RA14 | bidirectional | PORTA digital I/O RA14 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI32. |+| 45 | RB5 | bidirectional | PORTB digital I/O RB5 used as ICSP data pin PGD3 and alternate I2C1 data ASDA1, tolerates input levels up to 5.5V. |+| 46 | RB6 | bidirectional | PORTB digital I/O RB6 used as ICSP clock pin PGC3 and alternate I2C1 clock ASCL1, tolerates input levels up to 5.5V. |+| 47 | RB7 | bidirectional | PORTB digital I/O RB7 with Schmitt-trigger input, remappable as RP7, shared with external interrupt INT0, tolerates input levels up to 5.5V. |+| 48 | RB8 | bidirectional | PORTB digital I/O RB8 with Schmitt-trigger input, remappable as RP8 and shared with I2C1 clock SCL1, tolerates input levels up to 5.5V. | | 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). | ## Key specifications@@ -67,33 +67,18 @@ PIC24FJ128GA705T-I from Microchip Tech, in a UQFN-48-EP(6x6). Pinout and pin des | Category | Embedded Processors & Controllers | | Pins | 49 | -## Electrical characteristics--Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).--| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |-|---|---|---|---|---|---|---|---|-| Supply voltage range | | 2 | | 3.6 | V | | 1 |-| Processor speed (system clock) up to | | | | 32 | MHz | Up to 16 MIPS operation | 1 |-| High-current sink/source on all I/O pins | | | | 18 | mA | Sink, on all I/O pins; source also 18 mA | 2 |-| Tolerated input voltage on 5.5V-tolerant pins | | | | 5.5 | V | PORTA[14:7,4:0], PORTB[11:10,8:5], PORTC[9:6]; tolerates inputs above VDD | 126 |-| Flash erase/write endurance | | | 10000 | | erase/write cycles | Typical | 1 |-| Flash data retention | | 20 | | | years | Minimum | 1 |-| VCAP regulator filter capacitor | | | 10 | | µF | Connected from VCAP to ground; VCAP must not be connected to VDD | 31 |-| VCAP capacitor ESR | | | | 5 | Ω | Low-ESR capacitor on VCAP | 31 |- ## CAD (KiCad official) - Symbol: `PIC24FJ128GA705T-I` - Footprint: `Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm`-- 3D model: UQFN-48-EP(6x6), generated on the KiCad land (body 6 x 6 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)+- 3D model: UQFN-48-EP(6x6) (KiCad packages3D, STEP) - 3D model files: `pic24fj128ga705t-i-m4-etched.step` / `pic24fj128ga705t-i-m4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic24fj128ga705t-i-m4.step` / `pic24fj128ga705t-i-m4.glb` are the bare package body. ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/PIC24FJ256GA705-Family-Data-Sheet-DS30010118E.pdf) (424 pp, sha256 `0a5f346806df1dc3`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/PIC24FJ256GA705-Family-Data-Sheet-DS30010118E.pdf) (424 pp, sha256 `0a5f346806df1dc3`, retrieved 2026-11-20) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+201−103@@ -1,6 +1,6 @@ { "slug": "pic24fj128ga705t-i-m4",- "version": "0.1.1",+ "version": "0.1.2", "type": "component", "description": "Microchip Tech MICROCHIP, UQFN-48-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "579-FJ128GA705T-I/M4" }, "distributor_check": {- "checked_at": "2026-11-13T02:32:54Z",+ "checked_at": "2026-11-20T07:11:52Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PIC24FJ128GA705T-I/M4CT-ND",@@ -68,33 +68,33 @@ "pins": [ { "number": "1",- "name": "C1INC/C2INC/C3INC/TMPRN/RP9/SDA1/T1CK/CTED4/PMD3/RB9",+ "name": "RB9", "type": "bidirectional",- "description": "PORTB digital I/O RB9 (DIG/ST) shared with comparator inputs, Timer1 clock, I2C1 SDA1, tamper input and PMP data; it tolerates input voltages only up to VDD (Table 11-2)."+ "description": "PORTB digital I/O RB9 with Schmitt-trigger input, multiplexed with comparator, tamper, I2C1 SDA1 and Timer1 clock functions, and tolerates input levels only up to VDD." }, { "number": "2",- "name": "RP22/PMA1/PMALH/RC6",+ "name": "RC6", "type": "bidirectional",- "description": "PORTC digital I/O RC6 (DIG/ST) shared with remappable pin RP22 and EPMP address/strobe functions; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTC digital I/O RC6 with Schmitt-trigger input, remappable as RP22 and shared with Parallel Master Port address/latch function, and tolerates input levels up to 5.5V." }, { "number": "3",- "name": "RP23/PMA0/PMALL/RC7",+ "name": "RC7", "type": "bidirectional",- "description": "PORTC digital I/O RC7 (DIG/ST) shared with remappable pin RP23 and EPMP address/strobe functions; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTC digital I/O RC7 with Schmitt-trigger input, remappable as RP23 and shared with Parallel Master Port address/latch function, and tolerates input levels up to 5.5V." }, { "number": "4",- "name": "RP24/PMA5/RC8",+ "name": "RC8", "type": "bidirectional",- "description": "PORTC digital I/O RC8 (DIG/ST) shared with remappable pin RP24 and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTC digital I/O RC8 with Schmitt-trigger input, remappable as RP24 and shared with Parallel Master Port address function, and tolerates input levels up to 5.5V." }, { "number": "5",- "name": "RP25/CTED7/PMA6/RC9",+ "name": "RC9", "type": "bidirectional",- "description": "PORTC digital I/O RC9 (DIG/ST) shared with remappable pin RP25, CTMU edge input and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTC digital I/O RC9 with Schmitt-trigger input, remappable as RP25 and shared with CTMU edge input and Parallel Master Port address function, and tolerates input levels up to 5.5V." }, { "number": "6",@@ -106,145 +106,145 @@ "number": "7", "name": "VCAP", "type": "passive",- "description": "External filter capacitor connection for the on-chip voltage regulator (regulator enabled); it requires a 10 µF capacitor to ground with ESR below 5 Ω and must not be connected to VDD (Section 2.4)."+ "description": "External filter capacitor connection for the on-chip voltage regulator (regulator enabled), which requires a 10 µF capacitor to ground with ESR below 5 Ω and must not be connected to VDD." }, { "number": "8",- "name": "RPI29/RA11",+ "name": "RA11", "type": "bidirectional",- "description": "PORTA digital I/O RA11 (DIG/ST) shared with input-only remappable pin RPI29; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA11 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI29." }, { "number": "9",- "name": "PGD2/RP10/OCM1C/CTED11/PMD2/RB10",+ "name": "RB10", "type": "bidirectional",- "description": "PORTB digital I/O RB10 (DIG/ST) shared with ICSP data PGD2, remappable pin RP10 and MCCP1 output OCM1C; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB10 with Schmitt-trigger input, used as ICSP data pin PGD2 and tolerates input levels up to 5.5V." }, { "number": "10",- "name": "PGC2/REFI1/RP11/CTED9/PMD1/RB11",+ "name": "RB11", "type": "bidirectional",- "description": "PORTB digital I/O RB11 (DIG/ST) shared with ICSP clock PGC2, REFI1 and remappable pin RP11; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB11 with Schmitt-trigger input, used as ICSP clock pin PGC2 and tolerates input levels up to 5.5V." }, { "number": "11",- "name": "AN8/LVDIN/RP12/PMD0/RB12",+ "name": "RB12", "type": "bidirectional",- "description": "PORTB digital I/O RB12 (DIG/ST) shared with A/D input AN8, LVD input LVDIN and remappable pin RP12; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB12 with analog input AN8 and LVD input LVDIN, tolerates input levels only up to VDD." }, { "number": "12",- "name": "AN7/C1INC/RP13/OCM1D/CTPLS/PMRD/PMWR/RB13",+ "name": "RB13", "type": "bidirectional",- "description": "PORTB digital I/O RB13 (DIG/ST) shared with A/D input AN7, comparator input C1INC and CTMU pulse output CTPLS; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB13 with analog input AN7, tolerates input levels only up to VDD, and is shared with CTMU pulse output CTPLS." }, { "number": "13",- "name": "TMS/RP28/PMA2/PMALU/RA10",+ "name": "RA10", "type": "bidirectional",- "description": "PORTA digital I/O RA10 (DIG/ST) shared with JTAG test mode select TMS input and remappable pin RP28; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA10 with Schmitt-trigger input, used as JTAG TMS input function, tolerates input levels up to 5.5V." }, { "number": "14",- "name": "TCK/PMA7/RA7",+ "name": "RA7", "type": "bidirectional",- "description": "PORTA digital I/O RA7 (DIG/ST) shared with JTAG test clock TCK input and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA7 with Schmitt-trigger input, used as JTAG TCK input function, tolerates input levels up to 5.5V." }, { "number": "15",- "name": "CVREF/AN6/C3INB/RP14/CTED5/PMWR/PMENB/RB14",+ "name": "RB14", "type": "bidirectional",- "description": "PORTB digital I/O RB14 (DIG/ST) shared with comparator voltage reference output CVREF, A/D input AN6 and remappable pin RP14; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB14 with analog input AN6 and comparator voltage reference output CVREF, tolerates input levels only up to VDD." }, { "number": "16",- "name": "AN9/C3INA/RP15/CTED6/PMA14/PMCS/PMCS1/RB15",+ "name": "RB15", "type": "bidirectional",- "description": "PORTB digital I/O RB15 (DIG/ST) shared with A/D input AN9, comparator input C3INA and remappable pin RP15; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB15 with analog input AN9, tolerates input levels only up to VDD." }, { "number": "17", "name": "AVSS", "type": "power_in",- "description": "Ground reference for analog modules; it must always be connected regardless of whether analog modules are used (Section 2.1)."+ "description": "Ground reference for analog modules, which must always be connected regardless of whether analog features are used." }, { "number": "18", "name": "AVDD", "type": "power_in",- "description": "Positive supply for analog modules; it must always be connected regardless of whether analog modules are used (Section 2.1)."+ "description": "Positive supply for analog modules, which must always be connected regardless of whether analog features are used." }, { "number": "19", "name": "MCLR", "type": "input",- "description": "Master Clear input (ST); bringing this line low causes a device Reset, with VIH minimum 0.8 VDD and VIL maximum 0.2 VDD (Table 32-8)."+ "description": "Master Clear input that when brought low causes a device Reset, with VIL maximum of 0.2 VDD and VIH minimum of 0.8 VDD." }, { "number": "20",- "name": "RPI30/RA12",+ "name": "RA12", "type": "bidirectional",- "description": "PORTA digital I/O RA12 (DIG/ST) shared with input-only remappable pin RPI30; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA12 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI30." }, { "number": "21",- "name": "VREF+/CVREF+/AN0/C3INC/RP26/CTED1/RA0",- "type": "power_in",- "description": "PORTA digital I/O RA0 (DIG/ST) shared with the positive voltage reference input VREF+, A/D input AN0 and remappable pin RP26; it tolerates inputs up to 5.5V (Table 11-2)."+ "name": "RA0",+ "type": "bidirectional",+ "description": "PORTA digital I/O RA0 with analog input AN0 and high-side reference input VREF+, tolerates input levels up to 5.5V." }, { "number": "22",- "name": "VREF-/CVREF-/AN1/C3IND/RP27/CTED2/RA1",- "type": "power_in",- "description": "PORTA digital I/O RA1 (DIG/ST) shared with the negative voltage reference input VREF-, A/D input AN1 and remappable pin RP27; it tolerates inputs up to 5.5V (Table 11-2)."+ "name": "RA1",+ "type": "bidirectional",+ "description": "PORTA digital I/O RA1 with analog input AN1 and low-side reference input VREF-, tolerates input levels up to 5.5V." }, { "number": "23",- "name": "PGD1/AN2/CTCMP/C2INB/RP0/RB0",+ "name": "RB0", "type": "bidirectional",- "description": "PORTB digital I/O RB0 (DIG/ST) shared with ICSP data PGD1, A/D input AN2 and remappable pin RP0; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB0 used as ICSP data pin PGD1 and analog input AN2, tolerates input levels only up to VDD." }, { "number": "24",- "name": "PGC1/AN1-/AN3/C2INA/RP1/CTED12/RB1",+ "name": "RB1", "type": "bidirectional",- "description": "PORTB digital I/O RB1 (DIG/ST) shared with ICSP clock PGC1, A/D input AN3 and remappable pin RP1; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB1 used as ICSP clock pin PGC1 and analog inputs AN1- and AN3, tolerates input levels only up to VDD." }, { "number": "25",- "name": "AN4/C1INB/RP2/SDA2/CTED13/RB2",+ "name": "RB2", "type": "bidirectional",- "description": "PORTB digital I/O RB2 (DIG/ST) shared with A/D input AN4, comparator input C1INB, I2C2 SDA2 and remappable pin RP2; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB2 with analog input AN4 and I2C2 data SDA2, tolerates input levels only up to VDD." }, { "number": "26",- "name": "AN5/C1INA/RP3/SCL2/CTED8/RB3",+ "name": "RB3", "type": "bidirectional",- "description": "PORTB digital I/O RB3 (DIG/ST) shared with A/D input AN5, comparator input C1INA, I2C2 SCL2 and remappable pin RP3; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB3 with analog input AN5 and I2C2 clock SCL2, tolerates input levels only up to VDD." }, { "number": "27",- "name": "AN10/RP16/PMBE1/RC0",+ "name": "RC0", "type": "bidirectional",- "description": "PORTC digital I/O RC0 (DIG/ST) shared with A/D input AN10 and remappable pin RP16; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC0 with analog input AN10, tolerates input levels only up to VDD." }, { "number": "28",- "name": "AN11/RP17/PMA15/PMCS2/RC1",+ "name": "RC1", "type": "bidirectional",- "description": "PORTC digital I/O RC1 (DIG/ST) shared with A/D input AN11 and remappable pin RP17; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC1 with analog input AN11, tolerates input levels only up to VDD." }, { "number": "29",- "name": "AN12/RP18/PMACK1/RC2",+ "name": "RC2", "type": "bidirectional",- "description": "PORTC digital I/O RC2 (DIG/ST) shared with A/D input AN12 and remappable pin RP18; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC2 with analog input AN12, tolerates input levels only up to VDD." }, { "number": "30", "name": "VDD", "type": "power_in",- "description": "Positive supply for peripheral digital logic and I/O pins; the device operating supply range is 2.0V to 3.6V."+ "description": "Positive supply for peripheral digital logic and I/O pins, with a family operating range of 2.0V to 3.6V." }, { "number": "31",@@ -254,63 +254,63 @@ }, { "number": "32",- "name": "RPI31/RA13",+ "name": "RA13", "type": "bidirectional",- "description": "PORTA digital I/O RA13 (DIG/ST) shared with input-only remappable pin RPI31; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA13 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI31." }, { "number": "33",- "name": "OSCI/CLKI/C1IND/RA2",+ "name": "RA2", "type": "bidirectional",- "description": "PORTA digital I/O RA2 (DIG/ST) shared with the main oscillator/clock input OSCI/CLKI and comparator input C1IND; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA2 with Schmitt-trigger input, tolerates input levels up to 5.5V, and is shared with the primary oscillator/clock input OSCI/CLKI." }, { "number": "34",- "name": "OSCO/CLKO/C2IND/RA3",+ "name": "RA3", "type": "bidirectional",- "description": "PORTA digital I/O RA3 (DIG/ST) shared with the main oscillator output OSCO/CLKO (system clock output) and comparator input C2IND; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA3 with Schmitt-trigger input, tolerates input levels up to 5.5V, and is shared with the primary oscillator output OSCO/CLKO." }, { "number": "35",- "name": "TDO/PMA8/RA8",+ "name": "RA8", "type": "bidirectional",- "description": "PORTA digital I/O RA8 (DIG/ST) shared with JTAG test data output TDO and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA8 with Schmitt-trigger input, tolerates input levels up to 5.5V, and is shared with JTAG data output TDO." }, { "number": "36",- "name": "SOSCI/RP4/RB4",+ "name": "RB4", "type": "bidirectional",- "description": "PORTB digital I/O RB4 (DIG/ST) shared with secondary oscillator/Timer1 clock input SOSCI and remappable pin RP4; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB4 with Schmitt-trigger input, shared with secondary oscillator/Timer1 clock input SOSCI, tolerates input levels only up to VDD." }, { "number": "37",- "name": "SOSCO/PWRLCLK/RA4",+ "name": "RA4", "type": "bidirectional",- "description": "PORTA digital I/O RA4 (DIG/ST) shared with secondary oscillator/Timer1 clock output SOSCO and the RTCC 50/60 Hz clock input PWRLCLK; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA4 with Schmitt-trigger input, shared with secondary oscillator output SOSCO and RTC 50/60 Hz input PWRLCLK, tolerates input levels up to 5.5V." }, { "number": "38",- "name": "TDI/PMA9/RA9",+ "name": "RA9", "type": "bidirectional",- "description": "PORTA digital I/O RA9 (DIG/ST) shared with JTAG test data input TDI and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA9 with Schmitt-trigger input, used as JTAG data input TDI, tolerates input levels up to 5.5V." }, { "number": "39",- "name": "AN13/RP19/PMBE0/RC3",+ "name": "RC3", "type": "bidirectional",- "description": "PORTC digital I/O RC3 (DIG/ST) shared with A/D input AN13 and remappable pin RP19; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC3 with analog input AN13, tolerates input levels only up to VDD." }, { "number": "40",- "name": "RP20/PMA4/RC4",+ "name": "RC4", "type": "bidirectional",- "description": "PORTC digital I/O RC4 (DIG/ST) shared with remappable pin RP20 and EPMP address function; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC4 with Schmitt-trigger input, remappable as RP20, tolerates input levels only up to VDD." }, { "number": "41",- "name": "RP21/PMA3/RC5",+ "name": "RC5", "type": "bidirectional",- "description": "PORTC digital I/O RC5 (DIG/ST) shared with remappable pin RP21 and EPMP address function; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC5 with Schmitt-trigger input, remappable as RP21, tolerates input levels only up to VDD." }, { "number": "42",@@ -322,37 +322,37 @@ "number": "43", "name": "VDD", "type": "power_in",- "description": "Positive supply for peripheral digital logic and I/O pins; the device operating supply range is 2.0V to 3.6V."+ "description": "Positive supply for peripheral digital logic and I/O pins, with a family operating range of 2.0V to 3.6V." }, { "number": "44",- "name": "RPI32/RA14",+ "name": "RA14", "type": "bidirectional",- "description": "PORTA digital I/O RA14 (DIG/ST) shared with input-only remappable pin RPI32; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA14 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI32." }, { "number": "45",- "name": "PGD3/RP5/ASDA1/OCM1E/PMD7/RB5",+ "name": "RB5", "type": "bidirectional",- "description": "PORTB digital I/O RB5 (DIG/ST) shared with ICSP data PGD3, remappable pin RP5 and alternate I2C1 data ASDA1; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB5 used as ICSP data pin PGD3 and alternate I2C1 data ASDA1, tolerates input levels up to 5.5V." }, { "number": "46",- "name": "PGC3/RP6/ASCL1/OCM1F/PMD6/RB6",+ "name": "RB6", "type": "bidirectional",- "description": "PORTB digital I/O RB6 (DIG/ST) shared with ICSP clock PGC3, remappable pin RP6 and alternate I2C1 clock ASCL1; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB6 used as ICSP clock pin PGC3 and alternate I2C1 clock ASCL1, tolerates input levels up to 5.5V." }, { "number": "47",- "name": "RP7/OCM1A/CTED3/PMD5/INT0/RB7",+ "name": "RB7", "type": "bidirectional",- "description": "PORTB digital I/O RB7 (DIG/ST) shared with remappable pin RP7, MCCP1 output OCM1A and external interrupt INT0; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB7 with Schmitt-trigger input, remappable as RP7, shared with external interrupt INT0, tolerates input levels up to 5.5V." }, { "number": "48",- "name": "RP8/SCL1/OCM1B/CTED10/PMD4/RB8",+ "name": "RB8", "type": "bidirectional",- "description": "PORTB digital I/O RB8 (DIG/ST) shared with remappable pin RP8, I2C1 clock SCL1 and MCCP1 output OCM1B; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB8 with Schmitt-trigger input, remappable as RP8 and shared with I2C1 clock SCL1, tolerates input levels up to 5.5V." }, { "number": "49",@@ -372,27 +372,21 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The datasheet is the PIC24FJ256GA705 family document. The 48-pin UQFN pinout (Table 1-3 and Table 5 ; The exposed pad on the 48-pin UQFN (4.6x4.6 mm, per the package drawing on pages 405-407) is not num; Pin types were assigned by KiCad convention. Port-capable pins are typed bidirectional, including os",+ "extractor flagged: The 48-pin UQFN package has a 4.6x4.6 mm exposed pad (drawing on page 405-407), but Table 5 does not; KiCad has no power-class for a regulator filter pin. VCAP is typed 'passive' here, although the data; Port pins that also carry input-only RPI functions (RA11/pin 8, RA12/pin 20, RA13/pin 32, RA14/pin 4", "exposed pad 49 added from the footprint" ], "pages_sent": 71,- "cost_usd": 0.3557,- "at": "2026-11-13T02:32:24"+ "cost_usd": 0.3525,+ "at": "2026-11-20T07:11:42" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/PIC24FJ256GA705-Family-Data-Sheet-DS30010118E.pdf", "pages": 424, "sha256": "0a5f346806df1dc3",- "source_tier": "mfr"+ "source_tier": "mfr",+ "citation": "Microchip Tech datasheet" }, "cad": "KiCad official (CC-BY-SA 4.0)",- "model_3d_generated": {- "generator": "factory/gen_pkg3d.py",- "family": "QFN",- "height_mm": 0.55,- "height_basis": "datasheet A, nominal",- "standoff_mm": 0.0- }, "pins": { "total": 49, "described": 49,@@ -420,8 +414,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "fe19a5db49139b4eadfbd9744ad5eb6082c68e525f87e424edce41fdf9916279",- "checked": "2026-11-13",+ "sha256": "3694af25f4f18b80a48da8df2869a9f905c6cf49eb7fac9bc312f11f1caff676",+ "checked": "2026-11-20", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -439,8 +433,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "c6eb63827196a5e6fba22500f585577220ca55d7bbacc84c4a0a49c9fa3d99b1",- "checked": "2026-11-13",+ "sha256": "cb7421de0a7f4a327e7e62f693e9058dadeb136f6a61d1182c490f0278db1d30",+ "checked": "2026-11-20", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -485,5 +479,109 @@ "by": "factory/package_fit.py" } }+ },+ "metadata": {+ "characteristics": {+ "version": 1,+ "source": "datasheet",+ "rows": [+ {+ "name": "Supply voltage range",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "V",+ "min": 2,+ "typ": null,+ "max": 3.6,+ "conditions": "",+ "source_page": 1,+ "source": "datasheet"+ },+ {+ "name": "Processor speed (system clock) up to",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "MHz",+ "min": null,+ "typ": null,+ "max": 32,+ "conditions": "Up to 16 MIPS operation",+ "source_page": 1,+ "source": "datasheet"+ },+ {+ "name": "High-current sink/source on all I/O pins",+ "symbol": "",+ "kind": "electrical",+ "unit": "mA",+ "min": null,+ "typ": null,+ "max": 18,+ "conditions": "Sink, on all I/O pins; source also 18 mA",+ "source_page": 2,+ "source": "datasheet"+ },+ {+ "name": "Tolerated input voltage on 5.5V-tolerant pins",+ "symbol": "",+ "kind": "electrical",+ "unit": "V",+ "min": null,+ "typ": null,+ "max": 5.5,+ "conditions": "PORTA[14:7,4:0], PORTB[11:10,8:5], PORTC[9:6]; tolerates inputs above VDD",+ "source_page": 126,+ "source": "datasheet"+ },+ {+ "name": "Flash erase/write endurance",+ "symbol": "",+ "kind": "electrical",+ "unit": "erase/write cycles",+ "min": null,+ "typ": 10000,+ "max": null,+ "conditions": "Typical",+ "source_page": 1,+ "source": "datasheet"+ },+ {+ "name": "Flash data retention",+ "symbol": "",+ "kind": "electrical",+ "unit": "years",+ "min": 20,+ "typ": null,+ "max": null,+ "conditions": "Minimum",+ "source_page": 1,+ "source": "datasheet"+ },+ {+ "name": "VCAP regulator filter capacitor",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "µF",+ "min": null,+ "typ": 10,+ "max": null,+ "conditions": "Connected from VCAP to ground; VCAP must not be connected to VDD",+ "source_page": 31,+ "source": "datasheet"+ },+ {+ "name": "VCAP capacitor ESR",+ "symbol": "",+ "kind": "recommended_operating",+ "unit": "Ω",+ "min": null,+ "typ": null,+ "max": 5,+ "conditions": "Low-ESR capacitor on VCAP",+ "source_page": 31,+ "source": "datasheet"+ }+ ]+ } } }
page.json+100−111@@ -4,7 +4,7 @@ "slug": "pic24fj128ga705t-i-m4", "title": "PIC24FJ128GA705T-I/M4", "brief": "Microchip Tech MICROCHIP, UQFN-48-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.1",+ "version": "0.1.2", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "579-FJ128GA705T-I/M4" }, "distributor_check": {- "checked_at": "2026-11-13T02:32:54Z",+ "checked_at": "2026-11-20T07:11:52Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PIC24FJ128GA705T-I/M4CT-ND",@@ -51,33 +51,33 @@ "pins": [ { "number": "1",- "name": "C1INC/C2INC/C3INC/TMPRN/RP9/SDA1/T1CK/CTED4/PMD3/RB9",+ "name": "RB9", "type": "bidirectional",- "description": "PORTB digital I/O RB9 (DIG/ST) shared with comparator inputs, Timer1 clock, I2C1 SDA1, tamper input and PMP data; it tolerates input voltages only up to VDD (Table 11-2)."+ "description": "PORTB digital I/O RB9 with Schmitt-trigger input, multiplexed with comparator, tamper, I2C1 SDA1 and Timer1 clock functions, and tolerates input levels only up to VDD." }, { "number": "2",- "name": "RP22/PMA1/PMALH/RC6",+ "name": "RC6", "type": "bidirectional",- "description": "PORTC digital I/O RC6 (DIG/ST) shared with remappable pin RP22 and EPMP address/strobe functions; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTC digital I/O RC6 with Schmitt-trigger input, remappable as RP22 and shared with Parallel Master Port address/latch function, and tolerates input levels up to 5.5V." }, { "number": "3",- "name": "RP23/PMA0/PMALL/RC7",+ "name": "RC7", "type": "bidirectional",- "description": "PORTC digital I/O RC7 (DIG/ST) shared with remappable pin RP23 and EPMP address/strobe functions; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTC digital I/O RC7 with Schmitt-trigger input, remappable as RP23 and shared with Parallel Master Port address/latch function, and tolerates input levels up to 5.5V." }, { "number": "4",- "name": "RP24/PMA5/RC8",+ "name": "RC8", "type": "bidirectional",- "description": "PORTC digital I/O RC8 (DIG/ST) shared with remappable pin RP24 and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTC digital I/O RC8 with Schmitt-trigger input, remappable as RP24 and shared with Parallel Master Port address function, and tolerates input levels up to 5.5V." }, { "number": "5",- "name": "RP25/CTED7/PMA6/RC9",+ "name": "RC9", "type": "bidirectional",- "description": "PORTC digital I/O RC9 (DIG/ST) shared with remappable pin RP25, CTMU edge input and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTC digital I/O RC9 with Schmitt-trigger input, remappable as RP25 and shared with CTMU edge input and Parallel Master Port address function, and tolerates input levels up to 5.5V." }, { "number": "6",@@ -89,145 +89,145 @@ "number": "7", "name": "VCAP", "type": "passive",- "description": "External filter capacitor connection for the on-chip voltage regulator (regulator enabled); it requires a 10 µF capacitor to ground with ESR below 5 Ω and must not be connected to VDD (Section 2.4)."+ "description": "External filter capacitor connection for the on-chip voltage regulator (regulator enabled), which requires a 10 µF capacitor to ground with ESR below 5 Ω and must not be connected to VDD." }, { "number": "8",- "name": "RPI29/RA11",+ "name": "RA11", "type": "bidirectional",- "description": "PORTA digital I/O RA11 (DIG/ST) shared with input-only remappable pin RPI29; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA11 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI29." }, { "number": "9",- "name": "PGD2/RP10/OCM1C/CTED11/PMD2/RB10",+ "name": "RB10", "type": "bidirectional",- "description": "PORTB digital I/O RB10 (DIG/ST) shared with ICSP data PGD2, remappable pin RP10 and MCCP1 output OCM1C; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB10 with Schmitt-trigger input, used as ICSP data pin PGD2 and tolerates input levels up to 5.5V." }, { "number": "10",- "name": "PGC2/REFI1/RP11/CTED9/PMD1/RB11",+ "name": "RB11", "type": "bidirectional",- "description": "PORTB digital I/O RB11 (DIG/ST) shared with ICSP clock PGC2, REFI1 and remappable pin RP11; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB11 with Schmitt-trigger input, used as ICSP clock pin PGC2 and tolerates input levels up to 5.5V." }, { "number": "11",- "name": "AN8/LVDIN/RP12/PMD0/RB12",+ "name": "RB12", "type": "bidirectional",- "description": "PORTB digital I/O RB12 (DIG/ST) shared with A/D input AN8, LVD input LVDIN and remappable pin RP12; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB12 with analog input AN8 and LVD input LVDIN, tolerates input levels only up to VDD." }, { "number": "12",- "name": "AN7/C1INC/RP13/OCM1D/CTPLS/PMRD/PMWR/RB13",+ "name": "RB13", "type": "bidirectional",- "description": "PORTB digital I/O RB13 (DIG/ST) shared with A/D input AN7, comparator input C1INC and CTMU pulse output CTPLS; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB13 with analog input AN7, tolerates input levels only up to VDD, and is shared with CTMU pulse output CTPLS." }, { "number": "13",- "name": "TMS/RP28/PMA2/PMALU/RA10",+ "name": "RA10", "type": "bidirectional",- "description": "PORTA digital I/O RA10 (DIG/ST) shared with JTAG test mode select TMS input and remappable pin RP28; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA10 with Schmitt-trigger input, used as JTAG TMS input function, tolerates input levels up to 5.5V." }, { "number": "14",- "name": "TCK/PMA7/RA7",+ "name": "RA7", "type": "bidirectional",- "description": "PORTA digital I/O RA7 (DIG/ST) shared with JTAG test clock TCK input and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA7 with Schmitt-trigger input, used as JTAG TCK input function, tolerates input levels up to 5.5V." }, { "number": "15",- "name": "CVREF/AN6/C3INB/RP14/CTED5/PMWR/PMENB/RB14",+ "name": "RB14", "type": "bidirectional",- "description": "PORTB digital I/O RB14 (DIG/ST) shared with comparator voltage reference output CVREF, A/D input AN6 and remappable pin RP14; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB14 with analog input AN6 and comparator voltage reference output CVREF, tolerates input levels only up to VDD." }, { "number": "16",- "name": "AN9/C3INA/RP15/CTED6/PMA14/PMCS/PMCS1/RB15",+ "name": "RB15", "type": "bidirectional",- "description": "PORTB digital I/O RB15 (DIG/ST) shared with A/D input AN9, comparator input C3INA and remappable pin RP15; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB15 with analog input AN9, tolerates input levels only up to VDD." }, { "number": "17", "name": "AVSS", "type": "power_in",- "description": "Ground reference for analog modules; it must always be connected regardless of whether analog modules are used (Section 2.1)."+ "description": "Ground reference for analog modules, which must always be connected regardless of whether analog features are used." }, { "number": "18", "name": "AVDD", "type": "power_in",- "description": "Positive supply for analog modules; it must always be connected regardless of whether analog modules are used (Section 2.1)."+ "description": "Positive supply for analog modules, which must always be connected regardless of whether analog features are used." }, { "number": "19", "name": "MCLR", "type": "input",- "description": "Master Clear input (ST); bringing this line low causes a device Reset, with VIH minimum 0.8 VDD and VIL maximum 0.2 VDD (Table 32-8)."+ "description": "Master Clear input that when brought low causes a device Reset, with VIL maximum of 0.2 VDD and VIH minimum of 0.8 VDD." }, { "number": "20",- "name": "RPI30/RA12",+ "name": "RA12", "type": "bidirectional",- "description": "PORTA digital I/O RA12 (DIG/ST) shared with input-only remappable pin RPI30; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA12 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI30." }, { "number": "21",- "name": "VREF+/CVREF+/AN0/C3INC/RP26/CTED1/RA0",- "type": "power_in",- "description": "PORTA digital I/O RA0 (DIG/ST) shared with the positive voltage reference input VREF+, A/D input AN0 and remappable pin RP26; it tolerates inputs up to 5.5V (Table 11-2)."+ "name": "RA0",+ "type": "bidirectional",+ "description": "PORTA digital I/O RA0 with analog input AN0 and high-side reference input VREF+, tolerates input levels up to 5.5V." }, { "number": "22",- "name": "VREF-/CVREF-/AN1/C3IND/RP27/CTED2/RA1",- "type": "power_in",- "description": "PORTA digital I/O RA1 (DIG/ST) shared with the negative voltage reference input VREF-, A/D input AN1 and remappable pin RP27; it tolerates inputs up to 5.5V (Table 11-2)."+ "name": "RA1",+ "type": "bidirectional",+ "description": "PORTA digital I/O RA1 with analog input AN1 and low-side reference input VREF-, tolerates input levels up to 5.5V." }, { "number": "23",- "name": "PGD1/AN2/CTCMP/C2INB/RP0/RB0",+ "name": "RB0", "type": "bidirectional",- "description": "PORTB digital I/O RB0 (DIG/ST) shared with ICSP data PGD1, A/D input AN2 and remappable pin RP0; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB0 used as ICSP data pin PGD1 and analog input AN2, tolerates input levels only up to VDD." }, { "number": "24",- "name": "PGC1/AN1-/AN3/C2INA/RP1/CTED12/RB1",+ "name": "RB1", "type": "bidirectional",- "description": "PORTB digital I/O RB1 (DIG/ST) shared with ICSP clock PGC1, A/D input AN3 and remappable pin RP1; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB1 used as ICSP clock pin PGC1 and analog inputs AN1- and AN3, tolerates input levels only up to VDD." }, { "number": "25",- "name": "AN4/C1INB/RP2/SDA2/CTED13/RB2",+ "name": "RB2", "type": "bidirectional",- "description": "PORTB digital I/O RB2 (DIG/ST) shared with A/D input AN4, comparator input C1INB, I2C2 SDA2 and remappable pin RP2; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB2 with analog input AN4 and I2C2 data SDA2, tolerates input levels only up to VDD." }, { "number": "26",- "name": "AN5/C1INA/RP3/SCL2/CTED8/RB3",+ "name": "RB3", "type": "bidirectional",- "description": "PORTB digital I/O RB3 (DIG/ST) shared with A/D input AN5, comparator input C1INA, I2C2 SCL2 and remappable pin RP3; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB3 with analog input AN5 and I2C2 clock SCL2, tolerates input levels only up to VDD." }, { "number": "27",- "name": "AN10/RP16/PMBE1/RC0",+ "name": "RC0", "type": "bidirectional",- "description": "PORTC digital I/O RC0 (DIG/ST) shared with A/D input AN10 and remappable pin RP16; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC0 with analog input AN10, tolerates input levels only up to VDD." }, { "number": "28",- "name": "AN11/RP17/PMA15/PMCS2/RC1",+ "name": "RC1", "type": "bidirectional",- "description": "PORTC digital I/O RC1 (DIG/ST) shared with A/D input AN11 and remappable pin RP17; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC1 with analog input AN11, tolerates input levels only up to VDD." }, { "number": "29",- "name": "AN12/RP18/PMACK1/RC2",+ "name": "RC2", "type": "bidirectional",- "description": "PORTC digital I/O RC2 (DIG/ST) shared with A/D input AN12 and remappable pin RP18; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC2 with analog input AN12, tolerates input levels only up to VDD." }, { "number": "30", "name": "VDD", "type": "power_in",- "description": "Positive supply for peripheral digital logic and I/O pins; the device operating supply range is 2.0V to 3.6V."+ "description": "Positive supply for peripheral digital logic and I/O pins, with a family operating range of 2.0V to 3.6V." }, { "number": "31",@@ -237,63 +237,63 @@ }, { "number": "32",- "name": "RPI31/RA13",+ "name": "RA13", "type": "bidirectional",- "description": "PORTA digital I/O RA13 (DIG/ST) shared with input-only remappable pin RPI31; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA13 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI31." }, { "number": "33",- "name": "OSCI/CLKI/C1IND/RA2",+ "name": "RA2", "type": "bidirectional",- "description": "PORTA digital I/O RA2 (DIG/ST) shared with the main oscillator/clock input OSCI/CLKI and comparator input C1IND; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA2 with Schmitt-trigger input, tolerates input levels up to 5.5V, and is shared with the primary oscillator/clock input OSCI/CLKI." }, { "number": "34",- "name": "OSCO/CLKO/C2IND/RA3",+ "name": "RA3", "type": "bidirectional",- "description": "PORTA digital I/O RA3 (DIG/ST) shared with the main oscillator output OSCO/CLKO (system clock output) and comparator input C2IND; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA3 with Schmitt-trigger input, tolerates input levels up to 5.5V, and is shared with the primary oscillator output OSCO/CLKO." }, { "number": "35",- "name": "TDO/PMA8/RA8",+ "name": "RA8", "type": "bidirectional",- "description": "PORTA digital I/O RA8 (DIG/ST) shared with JTAG test data output TDO and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA8 with Schmitt-trigger input, tolerates input levels up to 5.5V, and is shared with JTAG data output TDO." }, { "number": "36",- "name": "SOSCI/RP4/RB4",+ "name": "RB4", "type": "bidirectional",- "description": "PORTB digital I/O RB4 (DIG/ST) shared with secondary oscillator/Timer1 clock input SOSCI and remappable pin RP4; it tolerates only VDD (Table 11-2)."+ "description": "PORTB digital I/O RB4 with Schmitt-trigger input, shared with secondary oscillator/Timer1 clock input SOSCI, tolerates input levels only up to VDD." }, { "number": "37",- "name": "SOSCO/PWRLCLK/RA4",+ "name": "RA4", "type": "bidirectional",- "description": "PORTA digital I/O RA4 (DIG/ST) shared with secondary oscillator/Timer1 clock output SOSCO and the RTCC 50/60 Hz clock input PWRLCLK; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA4 with Schmitt-trigger input, shared with secondary oscillator output SOSCO and RTC 50/60 Hz input PWRLCLK, tolerates input levels up to 5.5V." }, { "number": "38",- "name": "TDI/PMA9/RA9",+ "name": "RA9", "type": "bidirectional",- "description": "PORTA digital I/O RA9 (DIG/ST) shared with JTAG test data input TDI and EPMP address function; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA9 with Schmitt-trigger input, used as JTAG data input TDI, tolerates input levels up to 5.5V." }, { "number": "39",- "name": "AN13/RP19/PMBE0/RC3",+ "name": "RC3", "type": "bidirectional",- "description": "PORTC digital I/O RC3 (DIG/ST) shared with A/D input AN13 and remappable pin RP19; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC3 with analog input AN13, tolerates input levels only up to VDD." }, { "number": "40",- "name": "RP20/PMA4/RC4",+ "name": "RC4", "type": "bidirectional",- "description": "PORTC digital I/O RC4 (DIG/ST) shared with remappable pin RP20 and EPMP address function; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC4 with Schmitt-trigger input, remappable as RP20, tolerates input levels only up to VDD." }, { "number": "41",- "name": "RP21/PMA3/RC5",+ "name": "RC5", "type": "bidirectional",- "description": "PORTC digital I/O RC5 (DIG/ST) shared with remappable pin RP21 and EPMP address function; it tolerates only VDD (Table 11-2)."+ "description": "PORTC digital I/O RC5 with Schmitt-trigger input, remappable as RP21, tolerates input levels only up to VDD." }, { "number": "42",@@ -305,37 +305,37 @@ "number": "43", "name": "VDD", "type": "power_in",- "description": "Positive supply for peripheral digital logic and I/O pins; the device operating supply range is 2.0V to 3.6V."+ "description": "Positive supply for peripheral digital logic and I/O pins, with a family operating range of 2.0V to 3.6V." }, { "number": "44",- "name": "RPI32/RA14",+ "name": "RA14", "type": "bidirectional",- "description": "PORTA digital I/O RA14 (DIG/ST) shared with input-only remappable pin RPI32; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTA digital I/O RA14 with Schmitt-trigger input, tolerates input levels up to 5.5V, and shares the pin with input-only remappable RPI32." }, { "number": "45",- "name": "PGD3/RP5/ASDA1/OCM1E/PMD7/RB5",+ "name": "RB5", "type": "bidirectional",- "description": "PORTB digital I/O RB5 (DIG/ST) shared with ICSP data PGD3, remappable pin RP5 and alternate I2C1 data ASDA1; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB5 used as ICSP data pin PGD3 and alternate I2C1 data ASDA1, tolerates input levels up to 5.5V." }, { "number": "46",- "name": "PGC3/RP6/ASCL1/OCM1F/PMD6/RB6",+ "name": "RB6", "type": "bidirectional",- "description": "PORTB digital I/O RB6 (DIG/ST) shared with ICSP clock PGC3, remappable pin RP6 and alternate I2C1 clock ASCL1; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB6 used as ICSP clock pin PGC3 and alternate I2C1 clock ASCL1, tolerates input levels up to 5.5V." }, { "number": "47",- "name": "RP7/OCM1A/CTED3/PMD5/INT0/RB7",+ "name": "RB7", "type": "bidirectional",- "description": "PORTB digital I/O RB7 (DIG/ST) shared with remappable pin RP7, MCCP1 output OCM1A and external interrupt INT0; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB7 with Schmitt-trigger input, remappable as RP7, shared with external interrupt INT0, tolerates input levels up to 5.5V." }, { "number": "48",- "name": "RP8/SCL1/OCM1B/CTED10/PMD4/RB8",+ "name": "RB8", "type": "bidirectional",- "description": "PORTB digital I/O RB8 (DIG/ST) shared with remappable pin RP8, I2C1 clock SCL1 and MCCP1 output OCM1B; it tolerates inputs up to 5.5V (Table 11-2)."+ "description": "PORTB digital I/O RB8 with Schmitt-trigger input, remappable as RP8 and shared with I2C1 clock SCL1, tolerates input levels up to 5.5V." }, { "number": "49",@@ -355,27 +355,21 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The datasheet is the PIC24FJ256GA705 family document. The 48-pin UQFN pinout (Table 1-3 and Table 5 ; The exposed pad on the 48-pin UQFN (4.6x4.6 mm, per the package drawing on pages 405-407) is not num; Pin types were assigned by KiCad convention. Port-capable pins are typed bidirectional, including os",+ "extractor flagged: The 48-pin UQFN package has a 4.6x4.6 mm exposed pad (drawing on page 405-407), but Table 5 does not; KiCad has no power-class for a regulator filter pin. VCAP is typed 'passive' here, although the data; Port pins that also carry input-only RPI functions (RA11/pin 8, RA12/pin 20, RA13/pin 32, RA14/pin 4", "exposed pad 49 added from the footprint" ], "pages_sent": 71,- "cost_usd": 0.3557,- "at": "2026-11-13T02:32:24"+ "cost_usd": 0.3525,+ "at": "2026-11-20T07:11:42" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/PIC24FJ256GA705-Family-Data-Sheet-DS30010118E.pdf", "pages": 424, "sha256": "0a5f346806df1dc3",- "source_tier": "mfr"+ "source_tier": "mfr",+ "citation": "Microchip Tech datasheet" }, "cad": "KiCad official (CC-BY-SA 4.0)",- "model_3d_generated": {- "generator": "factory/gen_pkg3d.py",- "family": "QFN",- "height_mm": 0.55,- "height_basis": "datasheet A, nominal",- "standoff_mm": 0- }, "pins": { "total": 49, "described": 49,@@ -403,8 +397,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "fe19a5db49139b4eadfbd9744ad5eb6082c68e525f87e424edce41fdf9916279",- "checked": "2026-11-13",+ "sha256": "3694af25f4f18b80a48da8df2869a9f905c6cf49eb7fac9bc312f11f1caff676",+ "checked": "2026-11-20", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -422,8 +416,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "c6eb63827196a5e6fba22500f585577220ca55d7bbacc84c4a0a49c9fa3d99b1",- "checked": "2026-11-13",+ "sha256": "cb7421de0a7f4a327e7e62f693e9058dadeb136f6a61d1182c490f0278db1d30",+ "checked": "2026-11-20", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -470,16 +464,9 @@ } }, "metadata": {- "specs": {- "Manufacturer": "Microchip Tech",- "Package": "UQFN-48-EP(6x6)",- "Category": "Embedded Processors & Controllers",- "Pins": "49"- }, "characteristics": { "version": 1, "source": "datasheet",- "datasheet_sha256": "0a5f346806df1dc393f1adaeb95029f6961f559b0ddd4e0cfc67a7a745adbfd4", "rows": [ { "name": "Supply voltage range",@@ -618,5 +605,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Microchip Tech MICROCHIP, UQFN-48-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
pic24fj128ga705t-i-m4-hero.glb⋯ 1 unchanged line ⋯
pic24fj128ga705t-i-m4-hero.overlay.json+1151−1156@@ -1,1158 +1,1153 @@ {- "spec": "adom-hero 1.4",- "mpn": "PIC24FJ128GA705T-I",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 49,- "span_mm": 10.1,- "dash_mm": 0.2525,- "gap_mm": 0.1515,- "pad_stroke_mm": 0.0606- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 9,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 48,- "sides": "top + mirrored underside (single-sided)",- "omitted": null,- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "board_underside": true,- "electrical_pads_without_contact": [],- "mounting_pads_left_out": [],- "centre_offset_mm": 0.0,- "over_pads": false,- "tolerance_mm": 0.54,- "orientation_flipped": false,- "contacts_bbox_mm": [- -3.01,- 3.01,- -3.01,- 3.01+ "spec": "adom-hero 1.4",+ "mpn": "PIC24FJ128GA705T-I/M4",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 49,+ "span_mm": 10.1,+ "dash_mm": 0.2525,+ "gap_mm": 0.1515,+ "pad_stroke_mm": 0.0606+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 9,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 48,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.54,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.01,+ 3.01,+ -3.01,+ 3.01+ ],+ "pads_bbox_mm": [+ -3.375,+ 3.375,+ -3.375,+ 3.375+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "pic24fj128ga705t-i-m4-etched.glb",+ "glb_sha256": "cf9452d303c626c607e61f1c533036abecc7b7744c0a1a349c16a7a5a05c1c51",+ "footprint": "pic24fj128ga705t-i-m4.kicad_mod",+ "footprint_sha256": "3ace090469fbf85ac59d65a5c1720bbd6787183da5cce3ee5dc49a149e3b1346",+ "pins": "page.json component.pins",+ "pins_sha256": "828056009221f2c0f077c921d702fd0ac4b72ed5bd2fae93e1f7cf23a59f79e2"+ },+ "generator": "adom-wiki 1.8.30 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "RB9",+ "x": -4.07,+ "y": -2.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "2",+ "text": "RC6",+ "x": -3.475,+ "y": -1.8,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "3",+ "text": "RC7",+ "x": -3.475,+ "y": -1.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "4",+ "text": "RC8",+ "x": -3.475,+ "y": -1.0,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "5",+ "text": "RC9",+ "x": -3.475,+ "y": -0.6,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "6",+ "text": "VSS",+ "x": -3.475,+ "y": -0.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "7",+ "text": "VCAP",+ "x": -3.475,+ "y": 0.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "8",+ "text": "RA11",+ "x": -3.475,+ "y": 0.6,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "9",+ "text": "RB10",+ "x": -3.475,+ "y": 1.0,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "10",+ "text": "RB11",+ "x": -3.475,+ "y": 1.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "11",+ "text": "RB12",+ "x": -3.475,+ "y": 1.8,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "12",+ "text": "RB13",+ "x": -3.475,+ "y": 2.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "13",+ "text": "RA10",+ "x": -2.2,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "14",+ "text": "RA7",+ "x": -1.8,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "15",+ "text": "RB14",+ "x": -1.4,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "16",+ "text": "RB15",+ "x": -1.0,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "17",+ "text": "AVSS",+ "x": -0.6,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "18",+ "text": "AVDD",+ "x": -0.2,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "19",+ "text": "MCLR",+ "x": 0.2,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "20",+ "text": "RA12",+ "x": 0.6,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "21",+ "text": "RA0",+ "x": 1.0,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "22",+ "text": "RA1",+ "x": 1.4,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "23",+ "text": "RB0",+ "x": 1.8,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "24",+ "text": "RB1",+ "x": 2.2,+ "y": 3.475,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "25",+ "text": "RB2",+ "x": 3.475,+ "y": 2.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "26",+ "text": "RB3",+ "x": 3.475,+ "y": 1.8,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "27",+ "text": "RC0",+ "x": 3.475,+ "y": 1.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "28",+ "text": "RC1",+ "x": 3.475,+ "y": 1.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "29",+ "text": "RC2",+ "x": 3.475,+ "y": 0.6,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "30",+ "text": "VDD",+ "x": 3.475,+ "y": 0.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "31",+ "text": "VSS",+ "x": 3.475,+ "y": -0.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "32",+ "text": "RA13",+ "x": 3.475,+ "y": -0.6,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "33",+ "text": "RA2",+ "x": 3.475,+ "y": -1.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "34",+ "text": "RA3",+ "x": 3.475,+ "y": -1.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "35",+ "text": "RA8",+ "x": 3.475,+ "y": -1.8,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "36",+ "text": "RB4",+ "x": 3.475,+ "y": -2.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "37",+ "text": "RA4",+ "x": 2.2,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "38",+ "text": "RA9",+ "x": 1.8,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "39",+ "text": "RC3",+ "x": 1.4,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "40",+ "text": "RC4",+ "x": 1.0,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "41",+ "text": "RC5",+ "x": 0.6,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "42",+ "text": "VSS",+ "x": 0.2,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "43",+ "text": "VDD",+ "x": -0.2,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "44",+ "text": "RA14",+ "x": -0.6,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "45",+ "text": "RB5",+ "x": -1.0,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "46",+ "text": "RB6",+ "x": -1.4,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "47",+ "text": "RB7",+ "x": -1.8,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "48",+ "text": "RB8",+ "x": -2.2,+ "y": -3.475,+ "align": "left",+ "vertical": true,+ "h": 0.2+ } ],- "pads_bbox_mm": [- -3.375,- 3.375,- -3.375,- 3.375- ],- "seating_z_mm": 0.0- },- "sources": {- "glb": "pic24fj128ga705t-i-m4-etched.glb",- "glb_sha256": "cf9452d303c626c607e61f1c533036abecc7b7744c0a1a349c16a7a5a05c1c51",- "footprint": "pic24fj128ga705t-i-m4.kicad_mod",- "footprint_sha256": "3ace090469fbf85ac59d65a5c1720bbd6787183da5cce3ee5dc49a149e3b1346",- "pins": "page.json component.pins",- "pins_sha256": "4ede9058184d86792e2a5b5cd9f51ceaeed4027c2a0473386f4d794e4e0aee44"- },- "generator": "factory/hero_glb.py",- "labels": [- {- "pad": "1",- "text": "C1INC/C2INC/C3INC/TMPRN/RP9/SDA1/T1CK/CTED4/PMD3/RB9",- "x": -4.07,- "y": -2.2,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "2",- "text": "RP22/PMA1/PMALH/RC6",- "x": -3.475,- "y": -1.8,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "3",- "text": "RP23/PMA0/PMALL/RC7",- "x": -3.475,- "y": -1.4,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "4",- "text": "RP24/PMA5/RC8",- "x": -3.475,- "y": -1.0,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "5",- "text": "RP25/CTED7/PMA6/RC9",- "x": -3.475,- "y": -0.6,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "6",- "text": "VSS",- "x": -3.475,- "y": -0.2,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "7",- "text": "VCAP",- "x": -3.475,- "y": 0.2,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "8",- "text": "RPI29/RA11",- "x": -3.475,- "y": 0.6,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "9",- "text": "PGD2/RP10/OCM1C/CTED11/PMD2/RB10",- "x": -3.475,- "y": 1.0,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "10",- "text": "PGC2/REFI1/RP11/CTED9/PMD1/RB11",- "x": -3.475,- "y": 1.4,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "11",- "text": "AN8/LVDIN/RP12/PMD0/RB12",- "x": -3.475,- "y": 1.8,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "12",- "text": "AN7/C1INC/RP13/OCM1D/CTPLS/PMRD/PMWR/RB13",- "x": -3.475,- "y": 2.2,- "align": "right",- "vertical": false,- "h": 0.2- },- {- "pad": "13",- "text": "TMS/RP28/PMA2/PMALU/RA10",- "x": -2.2,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "14",- "text": "TCK/PMA7/RA7",- "x": -1.8,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "15",- "text": "CVREF/AN6/C3INB/RP14/CTED5/PMWR/PMENB/RB14",- "x": -1.4,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "16",- "text": "AN9/C3INA/RP15/CTED6/PMA14/PMCS/PMCS1/RB15",- "x": -1.0,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "17",- "text": "AVSS",- "x": -0.6,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "18",- "text": "AVDD",- "x": -0.2,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "19",- "text": "MCLR",- "x": 0.2,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "20",- "text": "RPI30/RA12",- "x": 0.6,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "21",- "text": "VREF+/CVREF+/AN0/C3INC/RP26/CTED1/RA0",- "x": 1.0,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "22",- "text": "VREF-/CVREF-/AN1/C3IND/RP27/CTED2/RA1",- "x": 1.4,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "23",- "text": "PGD1/AN2/CTCMP/C2INB/RP0/RB0",- "x": 1.8,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "24",- "text": "PGC1/AN1-/AN3/C2INA/RP1/CTED12/RB1",- "x": 2.2,- "y": 3.475,- "align": "right",- "vertical": true,- "h": 0.2- },- {- "pad": "25",- "text": "AN4/C1INB/RP2/SDA2/CTED13/RB2",- "x": 3.475,- "y": 2.2,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "26",- "text": "AN5/C1INA/RP3/SCL2/CTED8/RB3",- "x": 3.475,- "y": 1.8,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "27",- "text": "AN10/RP16/PMBE1/RC0",- "x": 3.475,- "y": 1.4,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "28",- "text": "AN11/RP17/PMA15/PMCS2/RC1",- "x": 3.475,- "y": 1.0,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "29",- "text": "AN12/RP18/PMACK1/RC2",- "x": 3.475,- "y": 0.6,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "30",- "text": "VDD",- "x": 3.475,- "y": 0.2,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "31",- "text": "VSS",- "x": 3.475,- "y": -0.2,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "32",- "text": "RPI31/RA13",- "x": 3.475,- "y": -0.6,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "33",- "text": "OSCI/CLKI/C1IND/RA2",- "x": 3.475,- "y": -1.0,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "34",- "text": "OSCO/CLKO/C2IND/RA3",- "x": 3.475,- "y": -1.4,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "35",- "text": "TDO/PMA8/RA8",- "x": 3.475,- "y": -1.8,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "36",- "text": "SOSCI/RP4/RB4",- "x": 3.475,- "y": -2.2,- "align": "left",- "vertical": false,- "h": 0.2- },- {- "pad": "37",- "text": "SOSCO/PWRLCLK/RA4",- "x": 2.2,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- },- {- "pad": "38",- "text": "TDI/PMA9/RA9",- "x": 1.8,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- },- {- "pad": "39",- "text": "AN13/RP19/PMBE0/RC3",- "x": 1.4,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- },- {- "pad": "40",- "text": "RP20/PMA4/RC4",- "x": 1.0,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- },- {- "pad": "41",- "text": "RP21/PMA3/RC5",- "x": 0.6,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- },- {- "pad": "42",- "text": "VSS",- "x": 0.2,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- },- {- "pad": "43",- "text": "VDD",- "x": -0.2,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- },- {- "pad": "44",- "text": "RPI32/RA14",- "x": -0.6,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- },- {- "pad": "45",- "text": "PGD3/RP5/ASDA1/OCM1E/PMD7/RB5",- "x": -1.0,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- },- {- "pad": "46",- "text": "PGC3/RP6/ASCL1/OCM1F/PMD6/RB6",- "x": -1.4,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- },- {- "pad": "47",- "text": "RP7/OCM1A/CTED3/PMD5/INT0/RB7",- "x": -1.8,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- },- {- "pad": "48",- "text": "RP8/SCL1/OCM1B/CTED10/PMD4/RB8",- "x": -2.2,- "y": -3.475,- "align": "left",- "vertical": true,- "h": 0.2- }- ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -2.95,- -2.2- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -2.95,- -1.8- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -2.95,- -1.4- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -2.95,- -1.0- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- -2.95,- -0.6- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- -2.95,- -0.2- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- -2.95,- 0.2- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- -2.95,- 0.6- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "9",- "shape": "roundrect",- "center_mm": [- -2.95,- 1.0- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "10",- "shape": "roundrect",- "center_mm": [- -2.95,- 1.4- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "11",- "shape": "roundrect",- "center_mm": [- -2.95,- 1.8- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "12",- "shape": "roundrect",- "center_mm": [- -2.95,- 2.2- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "13",- "shape": "roundrect",- "center_mm": [- -2.2,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "14",- "shape": "roundrect",- "center_mm": [- -1.8,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "15",- "shape": "roundrect",- "center_mm": [- -1.4,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "16",- "shape": "roundrect",- "center_mm": [- -1.0,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "17",- "shape": "roundrect",- "center_mm": [- -0.6,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "18",- "shape": "roundrect",- "center_mm": [- -0.2,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "19",- "shape": "roundrect",- "center_mm": [- 0.2,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "20",- "shape": "roundrect",- "center_mm": [- 0.6,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "21",- "shape": "roundrect",- "center_mm": [- 1.0,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "22",- "shape": "roundrect",- "center_mm": [- 1.4,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "23",- "shape": "roundrect",- "center_mm": [- 1.8,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "24",- "shape": "roundrect",- "center_mm": [- 2.2,- 2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "25",- "shape": "roundrect",- "center_mm": [- 2.95,- 2.2- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "26",- "shape": "roundrect",- "center_mm": [- 2.95,- 1.8- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "27",- "shape": "roundrect",- "center_mm": [- 2.95,- 1.4- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "28",- "shape": "roundrect",- "center_mm": [- 2.95,- 1.0- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "29",- "shape": "roundrect",- "center_mm": [- 2.95,- 0.6- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "30",- "shape": "roundrect",- "center_mm": [- 2.95,- 0.2- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "31",- "shape": "roundrect",- "center_mm": [- 2.95,- -0.2- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "32",- "shape": "roundrect",- "center_mm": [- 2.95,- -0.6- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "33",- "shape": "roundrect",- "center_mm": [- 2.95,- -1.0- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "34",- "shape": "roundrect",- "center_mm": [- 2.95,- -1.4- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "35",- "shape": "roundrect",- "center_mm": [- 2.95,- -1.8- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "36",- "shape": "roundrect",- "center_mm": [- 2.95,- -2.2- ],- "size_mm": [- 0.85,- 0.2- ],- "rot": 0.0- },- {- "number": "37",- "shape": "roundrect",- "center_mm": [- 2.2,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "38",- "shape": "roundrect",- "center_mm": [- 1.8,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "39",- "shape": "roundrect",- "center_mm": [- 1.4,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "40",- "shape": "roundrect",- "center_mm": [- 1.0,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "41",- "shape": "roundrect",- "center_mm": [- 0.6,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "42",- "shape": "roundrect",- "center_mm": [- 0.2,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "43",- "shape": "roundrect",- "center_mm": [- -0.2,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "44",- "shape": "roundrect",- "center_mm": [- -0.6,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "45",- "shape": "roundrect",- "center_mm": [- -1.0,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "46",- "shape": "roundrect",- "center_mm": [- -1.4,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "47",- "shape": "roundrect",- "center_mm": [- -1.8,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "48",- "shape": "roundrect",- "center_mm": [- -2.2,- -2.95- ],- "size_mm": [- 0.2,- 0.85- ],- "rot": 0.0- },- {- "number": "49",- "shape": "rect",- "center_mm": [- 0.0,- 0.0- ],- "size_mm": [- 4.2,- 4.2- ],- "rot": 0.0- }- ]-}+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ -2.2+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ -1.8+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ -1.4+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ -1.0+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ -0.6+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ -0.2+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ 0.2+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ 0.6+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ 1.0+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ 1.4+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ 1.8+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ -2.95,+ 2.2+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ -2.2,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ -1.8,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ -1.4,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ -1.0,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ -0.6,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ -0.2,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ 0.2,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ 0.6,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "roundrect",+ "center_mm": [+ 1.0,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "22",+ "shape": "roundrect",+ "center_mm": [+ 1.4,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "23",+ "shape": "roundrect",+ "center_mm": [+ 1.8,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "24",+ "shape": "roundrect",+ "center_mm": [+ 2.2,+ 2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "25",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ 2.2+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "26",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ 1.8+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "27",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ 1.4+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "28",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ 1.0+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "29",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ 0.6+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "30",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ 0.2+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "31",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ -0.2+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "32",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ -0.6+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "33",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ -1.0+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "34",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ -1.4+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "35",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ -1.8+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "36",+ "shape": "roundrect",+ "center_mm": [+ 2.95,+ -2.2+ ],+ "size_mm": [+ 0.85,+ 0.2+ ],+ "rot": 0.0+ },+ {+ "number": "37",+ "shape": "roundrect",+ "center_mm": [+ 2.2,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "38",+ "shape": "roundrect",+ "center_mm": [+ 1.8,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "39",+ "shape": "roundrect",+ "center_mm": [+ 1.4,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "40",+ "shape": "roundrect",+ "center_mm": [+ 1.0,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "41",+ "shape": "roundrect",+ "center_mm": [+ 0.6,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "42",+ "shape": "roundrect",+ "center_mm": [+ 0.2,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "43",+ "shape": "roundrect",+ "center_mm": [+ -0.2,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "44",+ "shape": "roundrect",+ "center_mm": [+ -0.6,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "45",+ "shape": "roundrect",+ "center_mm": [+ -1.0,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "46",+ "shape": "roundrect",+ "center_mm": [+ -1.4,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "47",+ "shape": "roundrect",+ "center_mm": [+ -1.8,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "48",+ "shape": "roundrect",+ "center_mm": [+ -2.2,+ -2.95+ ],+ "size_mm": [+ 0.2,+ 0.85+ ],+ "rot": 0.0+ },+ {+ "number": "49",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 4.2,+ 4.2+ ],+ "rot": 0.0+ }+ ]+}
pic24fj128ga705t-i-m4.kicad_sym+89−89@@ -4,204 +4,204 @@ (property "Value" "PIC24FJ128GA705T-I" (at 0 -35.56 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide)) (symbol "PIC24FJ128GA705T-I_0_1"- (rectangle (start -40.64 33.02) (end 40.64 -33.02)+ (rectangle (start -12.70 33.02) (end 12.70 -33.02) (stroke (width 0.254) (type default)) (fill (type background))) ) (symbol "PIC24FJ128GA705T-I_1_1"- (pin bidirectional line (at -45.72 30.48 0) (length 5.08)- (name "C1INC/C2INC/C3INC/TMPRN/RP9/SDA1/T1CK/CTED4/PMD3/RB9" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 30.48 0) (length 5.08)+ (name "RB9" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 27.94 0) (length 5.08)- (name "RP22/PMA1/PMALH/RC6" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 27.94 0) (length 5.08)+ (name "RC6" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 25.40 0) (length 5.08)- (name "RP23/PMA0/PMALL/RC7" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 25.40 0) (length 5.08)+ (name "RC7" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 22.86 0) (length 5.08)- (name "RP24/PMA5/RC8" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 22.86 0) (length 5.08)+ (name "RC8" (effects (font (size 1.27 1.27)))) (number "4" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 20.32 0) (length 5.08)- (name "RP25/CTED7/PMA6/RC9" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 20.32 0) (length 5.08)+ (name "RC9" (effects (font (size 1.27 1.27)))) (number "5" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at -45.72 17.78 0) (length 5.08)+ (pin power_in line (at -17.78 17.78 0) (length 5.08) (name "VSS" (effects (font (size 1.27 1.27)))) (number "6" (effects (font (size 1.27 1.27)))) )- (pin passive line (at -45.72 15.24 0) (length 5.08)+ (pin passive line (at -17.78 15.24 0) (length 5.08) (name "VCAP" (effects (font (size 1.27 1.27)))) (number "7" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 12.70 0) (length 5.08)- (name "RPI29/RA11" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 12.70 0) (length 5.08)+ (name "RA11" (effects (font (size 1.27 1.27)))) (number "8" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 10.16 0) (length 5.08)- (name "PGD2/RP10/OCM1C/CTED11/PMD2/RB10" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+ (name "RB10" (effects (font (size 1.27 1.27)))) (number "9" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 7.62 0) (length 5.08)- (name "PGC2/REFI1/RP11/CTED9/PMD1/RB11" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+ (name "RB11" (effects (font (size 1.27 1.27)))) (number "10" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 5.08 0) (length 5.08)- (name "AN8/LVDIN/RP12/PMD0/RB12" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 5.08 0) (length 5.08)+ (name "RB12" (effects (font (size 1.27 1.27)))) (number "11" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 2.54 0) (length 5.08)- (name "AN7/C1INC/RP13/OCM1D/CTPLS/PMRD/PMWR/RB13" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 2.54 0) (length 5.08)+ (name "RB13" (effects (font (size 1.27 1.27)))) (number "12" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 0.00 0) (length 5.08)- (name "TMS/RP28/PMA2/PMALU/RA10" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 0.00 0) (length 5.08)+ (name "RA10" (effects (font (size 1.27 1.27)))) (number "13" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 -2.54 0) (length 5.08)- (name "TCK/PMA7/RA7" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)+ (name "RA7" (effects (font (size 1.27 1.27)))) (number "14" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 -5.08 0) (length 5.08)- (name "CVREF/AN6/C3INB/RP14/CTED5/PMWR/PMENB/RB14" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)+ (name "RB14" (effects (font (size 1.27 1.27)))) (number "15" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 -7.62 0) (length 5.08)- (name "AN9/C3INA/RP15/CTED6/PMA14/PMCS/PMCS1/RB15" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+ (name "RB15" (effects (font (size 1.27 1.27)))) (number "16" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at -45.72 -10.16 0) (length 5.08)+ (pin power_in line (at -17.78 -10.16 0) (length 5.08) (name "AVSS" (effects (font (size 1.27 1.27)))) (number "17" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at -45.72 -12.70 0) (length 5.08)+ (pin power_in line (at -17.78 -12.70 0) (length 5.08) (name "AVDD" (effects (font (size 1.27 1.27)))) (number "18" (effects (font (size 1.27 1.27)))) )- (pin input line (at -45.72 -15.24 0) (length 5.08)+ (pin input line (at -17.78 -15.24 0) (length 5.08) (name "MCLR" (effects (font (size 1.27 1.27)))) (number "19" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 -17.78 0) (length 5.08)- (name "RPI30/RA12" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 -17.78 0) (length 5.08)+ (name "RA12" (effects (font (size 1.27 1.27)))) (number "20" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at -45.72 -20.32 0) (length 5.08)- (name "VREF+/CVREF+/AN0/C3INC/RP26/CTED1/RA0" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 -20.32 0) (length 5.08)+ (name "RA0" (effects (font (size 1.27 1.27)))) (number "21" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at -45.72 -22.86 0) (length 5.08)- (name "VREF-/CVREF-/AN1/C3IND/RP27/CTED2/RA1" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 -22.86 0) (length 5.08)+ (name "RA1" (effects (font (size 1.27 1.27)))) (number "22" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 -25.40 0) (length 5.08)- (name "PGD1/AN2/CTCMP/C2INB/RP0/RB0" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 -25.40 0) (length 5.08)+ (name "RB0" (effects (font (size 1.27 1.27)))) (number "23" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 -27.94 0) (length 5.08)- (name "PGC1/AN1-/AN3/C2INA/RP1/CTED12/RB1" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 -27.94 0) (length 5.08)+ (name "RB1" (effects (font (size 1.27 1.27)))) (number "24" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at -45.72 -30.48 0) (length 5.08)- (name "AN4/C1INB/RP2/SDA2/CTED13/RB2" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at -17.78 -30.48 0) (length 5.08)+ (name "RB2" (effects (font (size 1.27 1.27)))) (number "25" (effects (font (size 1.27 1.27)))) )- (pin passive line (at 45.72 27.94 180) (length 5.08)+ (pin passive line (at 17.78 27.94 180) (length 5.08) (name "EP" (effects (font (size 1.27 1.27)))) (number "49" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 25.40 180) (length 5.08)- (name "RP8/SCL1/OCM1B/CTED10/PMD4/RB8" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 25.40 180) (length 5.08)+ (name "RB8" (effects (font (size 1.27 1.27)))) (number "48" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 22.86 180) (length 5.08)- (name "RP7/OCM1A/CTED3/PMD5/INT0/RB7" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 22.86 180) (length 5.08)+ (name "RB7" (effects (font (size 1.27 1.27)))) (number "47" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 20.32 180) (length 5.08)- (name "PGC3/RP6/ASCL1/OCM1F/PMD6/RB6" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 20.32 180) (length 5.08)+ (name "RB6" (effects (font (size 1.27 1.27)))) (number "46" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 17.78 180) (length 5.08)- (name "PGD3/RP5/ASDA1/OCM1E/PMD7/RB5" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 17.78 180) (length 5.08)+ (name "RB5" (effects (font (size 1.27 1.27)))) (number "45" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 15.24 180) (length 5.08)- (name "RPI32/RA14" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 15.24 180) (length 5.08)+ (name "RA14" (effects (font (size 1.27 1.27)))) (number "44" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at 45.72 12.70 180) (length 5.08)+ (pin power_in line (at 17.78 12.70 180) (length 5.08) (name "VDD" (effects (font (size 1.27 1.27)))) (number "43" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at 45.72 10.16 180) (length 5.08)+ (pin power_in line (at 17.78 10.16 180) (length 5.08) (name "VSS" (effects (font (size 1.27 1.27)))) (number "42" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 7.62 180) (length 5.08)- (name "RP21/PMA3/RC5" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 7.62 180) (length 5.08)+ (name "RC5" (effects (font (size 1.27 1.27)))) (number "41" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 5.08 180) (length 5.08)- (name "RP20/PMA4/RC4" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 5.08 180) (length 5.08)+ (name "RC4" (effects (font (size 1.27 1.27)))) (number "40" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 2.54 180) (length 5.08)- (name "AN13/RP19/PMBE0/RC3" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+ (name "RC3" (effects (font (size 1.27 1.27)))) (number "39" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 0.00 180) (length 5.08)- (name "TDI/PMA9/RA9" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+ (name "RA9" (effects (font (size 1.27 1.27)))) (number "38" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 -2.54 180) (length 5.08)- (name "SOSCO/PWRLCLK/RA4" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)+ (name "RA4" (effects (font (size 1.27 1.27)))) (number "37" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 -5.08 180) (length 5.08)- (name "SOSCI/RP4/RB4" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+ (name "RB4" (effects (font (size 1.27 1.27)))) (number "36" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 -7.62 180) (length 5.08)- (name "TDO/PMA8/RA8" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+ (name "RA8" (effects (font (size 1.27 1.27)))) (number "35" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 -10.16 180) (length 5.08)- (name "OSCO/CLKO/C2IND/RA3" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 -10.16 180) (length 5.08)+ (name "RA3" (effects (font (size 1.27 1.27)))) (number "34" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 -12.70 180) (length 5.08)- (name "OSCI/CLKI/C1IND/RA2" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 -12.70 180) (length 5.08)+ (name "RA2" (effects (font (size 1.27 1.27)))) (number "33" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 -15.24 180) (length 5.08)- (name "RPI31/RA13" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 -15.24 180) (length 5.08)+ (name "RA13" (effects (font (size 1.27 1.27)))) (number "32" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at 45.72 -17.78 180) (length 5.08)+ (pin power_in line (at 17.78 -17.78 180) (length 5.08) (name "VSS" (effects (font (size 1.27 1.27)))) (number "31" (effects (font (size 1.27 1.27)))) )- (pin power_in line (at 45.72 -20.32 180) (length 5.08)+ (pin power_in line (at 17.78 -20.32 180) (length 5.08) (name "VDD" (effects (font (size 1.27 1.27)))) (number "30" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 -22.86 180) (length 5.08)- (name "AN12/RP18/PMACK1/RC2" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 -22.86 180) (length 5.08)+ (name "RC2" (effects (font (size 1.27 1.27)))) (number "29" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 -25.40 180) (length 5.08)- (name "AN11/RP17/PMA15/PMCS2/RC1" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 -25.40 180) (length 5.08)+ (name "RC1" (effects (font (size 1.27 1.27)))) (number "28" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 -27.94 180) (length 5.08)- (name "AN10/RP16/PMBE1/RC0" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 -27.94 180) (length 5.08)+ (name "RC0" (effects (font (size 1.27 1.27)))) (number "27" (effects (font (size 1.27 1.27)))) )- (pin bidirectional line (at 45.72 -30.48 180) (length 5.08)- (name "AN5/C1INA/RP3/SCL2/CTED8/RB3" (effects (font (size 1.27 1.27))))+ (pin bidirectional line (at 17.78 -30.48 180) (length 5.08)+ (name "RB3" (effects (font (size 1.27 1.27)))) (number "26" (effects (font (size 1.27 1.27)))) ) )
pic24fj128ga705t-i-m4.lbr+92−92@@ -130,61 +130,61 @@ <symbols> <symbol name="PIC24FJ128GA705T-I"> <description>Microchip Tech MICROCHIP, UQFN-48-EP(6x6). Pinout cross-checked by two models against the datasheet</description>- <wire x1="-40.64" y1="33.02" x2="40.64" y2="33.02" width="0.254" layer="94"/>- <wire x1="40.64" y1="33.02" x2="40.64" y2="-33.02" width="0.254" layer="94"/>- <wire x1="40.64" y1="-33.02" x2="-40.64" y2="-33.02" width="0.254" layer="94"/>- <wire x1="-40.64" y1="-33.02" x2="-40.64" y2="33.02" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="33.02" x2="12.7" y2="33.02" width="0.254" layer="94"/>+ <wire x1="12.7" y1="33.02" x2="12.7" y2="-33.02" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-33.02" x2="-12.7" y2="-33.02" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-33.02" x2="-12.7" y2="33.02" width="0.254" layer="94"/> <text x="0.0000" y="35.5600" size="1.27" layer="95" align="center">>NAME</text> <text x="0.0000" y="-35.5600" size="1.27" layer="96" align="center">>VALUE</text>- <pin name="C1INC/C2INC/C3INC/TMPRN/RP9/SDA1/T1CK/CTED4/PMD3/RB9" x="-45.72" y="30.48" length="middle" direction="io"/>- <pin name="RP22/PMA1/PMALH/RC6" x="-45.72" y="27.94" length="middle" direction="io"/>- <pin name="RP23/PMA0/PMALL/RC7" x="-45.72" y="25.4" length="middle" direction="io"/>- <pin name="RP24/PMA5/RC8" x="-45.72" y="22.86" length="middle" direction="io"/>- <pin name="RP25/CTED7/PMA6/RC9" x="-45.72" y="20.32" length="middle" direction="io"/>- <pin name="VSS" x="-45.72" y="17.78" length="middle" direction="pwr"/>- <pin name="VCAP" x="-45.72" y="15.24" length="middle" direction="pas"/>- <pin name="RPI29/RA11" x="-45.72" y="12.7" length="middle" direction="io"/>- <pin name="PGD2/RP10/OCM1C/CTED11/PMD2/RB10" x="-45.72" y="10.16" length="middle" direction="io"/>- <pin name="PGC2/REFI1/RP11/CTED9/PMD1/RB11" x="-45.72" y="7.62" length="middle" direction="io"/>- <pin name="AN8/LVDIN/RP12/PMD0/RB12" x="-45.72" y="5.08" length="middle" direction="io"/>- <pin name="AN7/C1INC/RP13/OCM1D/CTPLS/PMRD/PMWR/RB13" x="-45.72" y="2.54" length="middle" direction="io"/>- <pin name="TMS/RP28/PMA2/PMALU/RA10" x="-45.72" y="0" length="middle" direction="io"/>- <pin name="TCK/PMA7/RA7" x="-45.72" y="-2.54" length="middle" direction="io"/>- <pin name="CVREF/AN6/C3INB/RP14/CTED5/PMWR/PMENB/RB14" x="-45.72" y="-5.08" length="middle" direction="io"/>- <pin name="AN9/C3INA/RP15/CTED6/PMA14/PMCS/PMCS1/RB15" x="-45.72" y="-7.62" length="middle" direction="io"/>- <pin name="AVSS" x="-45.72" y="-10.16" length="middle" direction="pwr"/>- <pin name="AVDD" x="-45.72" y="-12.7" length="middle" direction="pwr"/>- <pin name="MCLR" x="-45.72" y="-15.24" length="middle" direction="in"/>- <pin name="RPI30/RA12" x="-45.72" y="-17.78" length="middle" direction="io"/>- <pin name="VREF+/CVREF+/AN0/C3INC/RP26/CTED1/RA0" x="-45.72" y="-20.32" length="middle" direction="pwr"/>- <pin name="VREF-/CVREF-/AN1/C3IND/RP27/CTED2/RA1" x="-45.72" y="-22.86" length="middle" direction="pwr"/>- <pin name="PGD1/AN2/CTCMP/C2INB/RP0/RB0" x="-45.72" y="-25.4" length="middle" direction="io"/>- <pin name="PGC1/AN1-/AN3/C2INA/RP1/CTED12/RB1" x="-45.72" y="-27.94" length="middle" direction="io"/>- <pin name="AN4/C1INB/RP2/SDA2/CTED13/RB2" x="-45.72" y="-30.48" length="middle" direction="io"/>- <pin name="EP" x="45.72" y="27.94" length="middle" direction="pas" rot="R180"/>- <pin name="RP8/SCL1/OCM1B/CTED10/PMD4/RB8" x="45.72" y="25.4" length="middle" direction="io" rot="R180"/>- <pin name="RP7/OCM1A/CTED3/PMD5/INT0/RB7" x="45.72" y="22.86" length="middle" direction="io" rot="R180"/>- <pin name="PGC3/RP6/ASCL1/OCM1F/PMD6/RB6" x="45.72" y="20.32" length="middle" direction="io" rot="R180"/>- <pin name="PGD3/RP5/ASDA1/OCM1E/PMD7/RB5" x="45.72" y="17.78" length="middle" direction="io" rot="R180"/>- <pin name="RPI32/RA14" x="45.72" y="15.24" length="middle" direction="io" rot="R180"/>- <pin name="VDD" x="45.72" y="12.7" length="middle" direction="pwr" rot="R180"/>- <pin name="VSS@2" x="45.72" y="10.16" length="middle" direction="pwr" rot="R180"/>- <pin name="RP21/PMA3/RC5" x="45.72" y="7.62" length="middle" direction="io" rot="R180"/>- <pin name="RP20/PMA4/RC4" x="45.72" y="5.08" length="middle" direction="io" rot="R180"/>- <pin name="AN13/RP19/PMBE0/RC3" x="45.72" y="2.54" length="middle" direction="io" rot="R180"/>- <pin name="TDI/PMA9/RA9" x="45.72" y="0" length="middle" direction="io" rot="R180"/>- <pin name="SOSCO/PWRLCLK/RA4" x="45.72" y="-2.54" length="middle" direction="io" rot="R180"/>- <pin name="SOSCI/RP4/RB4" x="45.72" y="-5.08" length="middle" direction="io" rot="R180"/>- <pin name="TDO/PMA8/RA8" x="45.72" y="-7.62" length="middle" direction="io" rot="R180"/>- <pin name="OSCO/CLKO/C2IND/RA3" x="45.72" y="-10.16" length="middle" direction="io" rot="R180"/>- <pin name="OSCI/CLKI/C1IND/RA2" x="45.72" y="-12.7" length="middle" direction="io" rot="R180"/>- <pin name="RPI31/RA13" x="45.72" y="-15.24" length="middle" direction="io" rot="R180"/>- <pin name="VSS@3" x="45.72" y="-17.78" length="middle" direction="pwr" rot="R180"/>- <pin name="VDD@2" x="45.72" y="-20.32" length="middle" direction="pwr" rot="R180"/>- <pin name="AN12/RP18/PMACK1/RC2" x="45.72" y="-22.86" length="middle" direction="io" rot="R180"/>- <pin name="AN11/RP17/PMA15/PMCS2/RC1" x="45.72" y="-25.4" length="middle" direction="io" rot="R180"/>- <pin name="AN10/RP16/PMBE1/RC0" x="45.72" y="-27.94" length="middle" direction="io" rot="R180"/>- <pin name="AN5/C1INA/RP3/SCL2/CTED8/RB3" x="45.72" y="-30.48" length="middle" direction="io" rot="R180"/>+ <pin name="RB9" x="-17.78" y="30.48" length="middle" direction="io"/>+ <pin name="RC6" x="-17.78" y="27.94" length="middle" direction="io"/>+ <pin name="RC7" x="-17.78" y="25.4" length="middle" direction="io"/>+ <pin name="RC8" x="-17.78" y="22.86" length="middle" direction="io"/>+ <pin name="RC9" x="-17.78" y="20.32" length="middle" direction="io"/>+ <pin name="VSS" x="-17.78" y="17.78" length="middle" direction="pwr"/>+ <pin name="VCAP" x="-17.78" y="15.24" length="middle" direction="pas"/>+ <pin name="RA11" x="-17.78" y="12.7" length="middle" direction="io"/>+ <pin name="RB10" x="-17.78" y="10.16" length="middle" direction="io"/>+ <pin name="RB11" x="-17.78" y="7.62" length="middle" direction="io"/>+ <pin name="RB12" x="-17.78" y="5.08" length="middle" direction="io"/>+ <pin name="RB13" x="-17.78" y="2.54" length="middle" direction="io"/>+ <pin name="RA10" x="-17.78" y="0" length="middle" direction="io"/>+ <pin name="RA7" x="-17.78" y="-2.54" length="middle" direction="io"/>+ <pin name="RB14" x="-17.78" y="-5.08" length="middle" direction="io"/>+ <pin name="RB15" x="-17.78" y="-7.62" length="middle" direction="io"/>+ <pin name="AVSS" x="-17.78" y="-10.16" length="middle" direction="pwr"/>+ <pin name="AVDD" x="-17.78" y="-12.7" length="middle" direction="pwr"/>+ <pin name="MCLR" x="-17.78" y="-15.24" length="middle" direction="in"/>+ <pin name="RA12" x="-17.78" y="-17.78" length="middle" direction="io"/>+ <pin name="RA0" x="-17.78" y="-20.32" length="middle" direction="io"/>+ <pin name="RA1" x="-17.78" y="-22.86" length="middle" direction="io"/>+ <pin name="RB0" x="-17.78" y="-25.4" length="middle" direction="io"/>+ <pin name="RB1" x="-17.78" y="-27.94" length="middle" direction="io"/>+ <pin name="RB2" x="-17.78" y="-30.48" length="middle" direction="io"/>+ <pin name="EP" x="17.78" y="27.94" length="middle" direction="pas" rot="R180"/>+ <pin name="RB8" x="17.78" y="25.4" length="middle" direction="io" rot="R180"/>+ <pin name="RB7" x="17.78" y="22.86" length="middle" direction="io" rot="R180"/>+ <pin name="RB6" x="17.78" y="20.32" length="middle" direction="io" rot="R180"/>+ <pin name="RB5" x="17.78" y="17.78" length="middle" direction="io" rot="R180"/>+ <pin name="RA14" x="17.78" y="15.24" length="middle" direction="io" rot="R180"/>+ <pin name="VDD" x="17.78" y="12.7" length="middle" direction="pwr" rot="R180"/>+ <pin name="VSS@2" x="17.78" y="10.16" length="middle" direction="pwr" rot="R180"/>+ <pin name="RC5" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>+ <pin name="RC4" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>+ <pin name="RC3" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>+ <pin name="RA9" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+ <pin name="RA4" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+ <pin name="RB4" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+ <pin name="RA8" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>+ <pin name="RA3" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>+ <pin name="RA2" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>+ <pin name="RA13" x="17.78" y="-15.24" length="middle" direction="io" rot="R180"/>+ <pin name="VSS@3" x="17.78" y="-17.78" length="middle" direction="pwr" rot="R180"/>+ <pin name="VDD@2" x="17.78" y="-20.32" length="middle" direction="pwr" rot="R180"/>+ <pin name="RC2" x="17.78" y="-22.86" length="middle" direction="io" rot="R180"/>+ <pin name="RC1" x="17.78" y="-25.4" length="middle" direction="io" rot="R180"/>+ <pin name="RC0" x="17.78" y="-27.94" length="middle" direction="io" rot="R180"/>+ <pin name="RB3" x="17.78" y="-30.48" length="middle" direction="io" rot="R180"/> </symbol> </symbols> <devicesets>@@ -196,55 +196,55 @@ <devices> <device name="" package="QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm"> <connects>- <connect gate="G$1" pin="C1INC/C2INC/C3INC/TMPRN/RP9/SDA1/T1CK/CTED4/PMD3/RB9" pad="1"/>- <connect gate="G$1" pin="RP22/PMA1/PMALH/RC6" pad="2"/>- <connect gate="G$1" pin="RP23/PMA0/PMALL/RC7" pad="3"/>- <connect gate="G$1" pin="RP24/PMA5/RC8" pad="4"/>- <connect gate="G$1" pin="RP25/CTED7/PMA6/RC9" pad="5"/>+ <connect gate="G$1" pin="RB9" pad="1"/>+ <connect gate="G$1" pin="RC6" pad="2"/>+ <connect gate="G$1" pin="RC7" pad="3"/>+ <connect gate="G$1" pin="RC8" pad="4"/>+ <connect gate="G$1" pin="RC9" pad="5"/> <connect gate="G$1" pin="VSS" pad="6"/> <connect gate="G$1" pin="VCAP" pad="7"/>- <connect gate="G$1" pin="RPI29/RA11" pad="8"/>- <connect gate="G$1" pin="PGD2/RP10/OCM1C/CTED11/PMD2/RB10" pad="9"/>- <connect gate="G$1" pin="PGC2/REFI1/RP11/CTED9/PMD1/RB11" pad="10"/>- <connect gate="G$1" pin="AN8/LVDIN/RP12/PMD0/RB12" pad="11"/>- <connect gate="G$1" pin="AN7/C1INC/RP13/OCM1D/CTPLS/PMRD/PMWR/RB13" pad="12"/>- <connect gate="G$1" pin="TMS/RP28/PMA2/PMALU/RA10" pad="13"/>- <connect gate="G$1" pin="TCK/PMA7/RA7" pad="14"/>- <connect gate="G$1" pin="CVREF/AN6/C3INB/RP14/CTED5/PMWR/PMENB/RB14" pad="15"/>- <connect gate="G$1" pin="AN9/C3INA/RP15/CTED6/PMA14/PMCS/PMCS1/RB15" pad="16"/>+ <connect gate="G$1" pin="RA11" pad="8"/>+ <connect gate="G$1" pin="RB10" pad="9"/>+ <connect gate="G$1" pin="RB11" pad="10"/>+ <connect gate="G$1" pin="RB12" pad="11"/>+ <connect gate="G$1" pin="RB13" pad="12"/>+ <connect gate="G$1" pin="RA10" pad="13"/>+ <connect gate="G$1" pin="RA7" pad="14"/>+ <connect gate="G$1" pin="RB14" pad="15"/>+ <connect gate="G$1" pin="RB15" pad="16"/> <connect gate="G$1" pin="AVSS" pad="17"/> <connect gate="G$1" pin="AVDD" pad="18"/> <connect gate="G$1" pin="MCLR" pad="19"/>- <connect gate="G$1" pin="RPI30/RA12" pad="20"/>- <connect gate="G$1" pin="VREF+/CVREF+/AN0/C3INC/RP26/CTED1/RA0" pad="21"/>- <connect gate="G$1" pin="VREF-/CVREF-/AN1/C3IND/RP27/CTED2/RA1" pad="22"/>- <connect gate="G$1" pin="PGD1/AN2/CTCMP/C2INB/RP0/RB0" pad="23"/>- <connect gate="G$1" pin="PGC1/AN1-/AN3/C2INA/RP1/CTED12/RB1" pad="24"/>- <connect gate="G$1" pin="AN4/C1INB/RP2/SDA2/CTED13/RB2" pad="25"/>+ <connect gate="G$1" pin="RA12" pad="20"/>+ <connect gate="G$1" pin="RA0" pad="21"/>+ <connect gate="G$1" pin="RA1" pad="22"/>+ <connect gate="G$1" pin="RB0" pad="23"/>+ <connect gate="G$1" pin="RB1" pad="24"/>+ <connect gate="G$1" pin="RB2" pad="25"/> <connect gate="G$1" pin="EP" pad="49"/>- <connect gate="G$1" pin="RP8/SCL1/OCM1B/CTED10/PMD4/RB8" pad="48"/>- <connect gate="G$1" pin="RP7/OCM1A/CTED3/PMD5/INT0/RB7" pad="47"/>- <connect gate="G$1" pin="PGC3/RP6/ASCL1/OCM1F/PMD6/RB6" pad="46"/>- <connect gate="G$1" pin="PGD3/RP5/ASDA1/OCM1E/PMD7/RB5" pad="45"/>- <connect gate="G$1" pin="RPI32/RA14" pad="44"/>+ <connect gate="G$1" pin="RB8" pad="48"/>+ <connect gate="G$1" pin="RB7" pad="47"/>+ <connect gate="G$1" pin="RB6" pad="46"/>+ <connect gate="G$1" pin="RB5" pad="45"/>+ <connect gate="G$1" pin="RA14" pad="44"/> <connect gate="G$1" pin="VDD" pad="43"/> <connect gate="G$1" pin="VSS@2" pad="42"/>- <connect gate="G$1" pin="RP21/PMA3/RC5" pad="41"/>- <connect gate="G$1" pin="RP20/PMA4/RC4" pad="40"/>- <connect gate="G$1" pin="AN13/RP19/PMBE0/RC3" pad="39"/>- <connect gate="G$1" pin="TDI/PMA9/RA9" pad="38"/>- <connect gate="G$1" pin="SOSCO/PWRLCLK/RA4" pad="37"/>- <connect gate="G$1" pin="SOSCI/RP4/RB4" pad="36"/>- <connect gate="G$1" pin="TDO/PMA8/RA8" pad="35"/>- <connect gate="G$1" pin="OSCO/CLKO/C2IND/RA3" pad="34"/>- <connect gate="G$1" pin="OSCI/CLKI/C1IND/RA2" pad="33"/>- <connect gate="G$1" pin="RPI31/RA13" pad="32"/>+ <connect gate="G$1" pin="RC5" pad="41"/>+ <connect gate="G$1" pin="RC4" pad="40"/>+ <connect gate="G$1" pin="RC3" pad="39"/>+ <connect gate="G$1" pin="RA9" pad="38"/>+ <connect gate="G$1" pin="RA4" pad="37"/>+ <connect gate="G$1" pin="RB4" pad="36"/>+ <connect gate="G$1" pin="RA8" pad="35"/>+ <connect gate="G$1" pin="RA3" pad="34"/>+ <connect gate="G$1" pin="RA2" pad="33"/>+ <connect gate="G$1" pin="RA13" pad="32"/> <connect gate="G$1" pin="VSS@3" pad="31"/> <connect gate="G$1" pin="VDD@2" pad="30"/>- <connect gate="G$1" pin="AN12/RP18/PMACK1/RC2" pad="29"/>- <connect gate="G$1" pin="AN11/RP17/PMA15/PMCS2/RC1" pad="28"/>- <connect gate="G$1" pin="AN10/RP16/PMBE1/RC0" pad="27"/>- <connect gate="G$1" pin="AN5/C1INA/RP3/SCL2/CTED8/RB3" pad="26"/>+ <connect gate="G$1" pin="RC2" pad="29"/>+ <connect gate="G$1" pin="RC1" pad="28"/>+ <connect gate="G$1" pin="RC0" pad="27"/>+ <connect gate="G$1" pin="RB3" pad="26"/> </connects> <technologies> <technology name="">
pic24fj128ga705t-i-m4.step+1−1@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-13T02:32:45',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-19T23:28:31',('Author'),( 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));