← Commit history

Initial commit: component/pic18f45k80-i

Ray ·c2e07fecb9 ·
2 files changed +116
README.mdadded+82
@@ -0,0 +1,82 @@+# PIC18F45K80-I++**Microchip** · Microcontrollers (MCU/MPU/SOC) · TQFP-44(10x10)++PIC18F45K80-I from Microchip, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MCLR/RE3 | input | Active-low master clear (device reset) input; also usable as digital input RE3 when MCLR function is disabled by configuration. |+| 2 | RA0/CVREF/AN0/ULPWU | bidirectional | Port A bit 0 / comparator voltage reference output / ADC analog channel 0 / ultra-low-power wake-up input. |+| 3 | RA1/AN1/C1INC | bidirectional | Port A bit 1 / ADC analog channel 1 / comparator 1 input C. |+| 4 | RA2/VREF-/AN2/C2INC | bidirectional | Port A bit 2 / ADC negative voltage reference input / ADC analog channel 2 / comparator 2 input C. |+| 5 | RA3/VREF+/AN3 | bidirectional | Port A bit 3 / ADC positive voltage reference input / ADC analog channel 3. |+| 6 | VDDCORE/VCAP | power_in | Regulated core logic supply (VDDCORE) on LF parts, or external filter capacitor connection (VCAP, typ. 10 uF low-ESR to VSS) on F parts with internal LDO regulator enabled. |+| 7 | RA5/AN4/HLVDIN/T1CKI/SS | bidirectional | Port A bit 5 / ADC analog channel 4 / high/low-voltage detect input / Timer1 clock input / MSSP SPI slave select (active low). |+| 8 | RE0/AN5/RD | bidirectional | Port E bit 0 / ADC analog channel 5 / parallel slave port read strobe input (active low). |+| 9 | RE1/AN6/C1OUT/WR | bidirectional | Port E bit 1 / ADC analog channel 6 / comparator 1 output / parallel slave port write strobe input (active low). |+| 10 | RE2/AN7/C2OUT/CS | bidirectional | Port E bit 2 / ADC analog channel 7 / comparator 2 output / parallel slave port chip select input (active low). |+| 11 | VDD | power_in | Positive supply for I/O and logic. Operating range 1.8 V to 5.5 V (LF) / 2.7 V to 5.5 V (F). |+| 12 | VSS | power_in | Ground reference for logic and I/O. |+| 13 | OSC1/CLKIN/RA7 | bidirectional | Primary oscillator input, external clock input, or general-purpose I/O port A bit 7. |+| 14 | OSC2/CLKOUT/RA6 | bidirectional | Primary oscillator output (crystal), Fosc/4 clock output, or general-purpose I/O port A bit 6. |+| 15 | RC0/SOSCO/SCLKI | bidirectional | Port C bit 0 / secondary (Timer1/Timer3/Timer5) oscillator output / secondary oscillator clock input. |+| 16 | RC1/SOSCI | bidirectional | Port C bit 1 / secondary oscillator crystal input. |+| 17 | RC2/T1G/CCP2 | bidirectional | Port C bit 2 / Timer1 external gate input / Capture-2, Compare-2, PWM-2 I/O. |+| 18 | RC3/REFO/SCL/SCK | bidirectional | Port C bit 3 / reference clock output / MSSP I2C clock / MSSP SPI clock. |+| 19 | RD0/C1INA/PSP0 | bidirectional | Port D bit 0 / comparator 1 input A / parallel slave port data 0. |+| 20 | RD1/C1INB/PSP1 | bidirectional | Port D bit 1 / comparator 1 input B / parallel slave port data 1. |+| 21 | RD2/C2INA/PSP2 | bidirectional | Port D bit 2 / comparator 2 input A / parallel slave port data 2. |+| 22 | RD3/C2INB/CTMUI/PSP3 | bidirectional | Port D bit 3 / comparator 2 input B / CTMU pulse-generator output / parallel slave port data 3. |+| 23 | RC4/SDA/SDI | bidirectional | Port C bit 4 / MSSP I2C data / MSSP SPI serial data in. |+| 24 | RC5/SDO | bidirectional | Port C bit 5 / MSSP SPI serial data out. |+| 25 | RC6/CANTX/TX1/CK1/CCP3 | bidirectional | Port C bit 6 / ECAN transmit / EUSART1 async transmit / EUSART1 sync clock / CCP3 Capture/Compare/PWM I/O. |+| 26 | RC7/CANRX/RX1/DT1/CCP4 | bidirectional | Port C bit 7 / ECAN receive / EUSART1 async receive / EUSART1 sync data / CCP4 Capture/Compare/PWM I/O. |+| 27 | RD4/ECCP1/P1A/PSP4 | bidirectional | Port D bit 4 / ECCP1 Enhanced Capture/Compare/PWM I/O / PWM1 output A / parallel slave port data 4. |+| 28 | RD5/P1B/PSP5 | bidirectional | Port D bit 5 / ECCP1 PWM output B / parallel slave port data 5. |+| 29 | RD6/TX2/CK2/P1C/PSP6 | bidirectional | Port D bit 6 / EUSART2 async transmit / EUSART2 sync clock / ECCP1 PWM output C / parallel slave port data 6. |+| 30 | RD7/RX2/DT2/P1D/PSP7 | bidirectional | Port D bit 7 / EUSART2 async receive / EUSART2 sync data / ECCP1 PWM output D / parallel slave port data 7. |+| 31 | VSS | power_in | Ground reference for logic and I/O. |+| 32 | VDD | power_in | Positive supply for I/O and logic. Operating range 1.8 V to 5.5 V (LF) / 2.7 V to 5.5 V (F). |+| 33 | RB0/AN10/FLT0/INT0 | bidirectional | Port B bit 0 / ADC analog channel 10 / ECCP1 fault input / external interrupt 0. |+| 34 | RB1/AN8/CTDIN/INT1 | bidirectional | Port B bit 1 / ADC analog channel 8 / CTMU pulse delay input / external interrupt 1. |+| 35 | RB2/CANTX/CTED1/INT2 | bidirectional | Port B bit 2 / ECAN transmit (alternate) / CTMU edge 1 input / external interrupt 2. |+| 36 | RB3/CANRX/CTED2/INT3 | bidirectional | Port B bit 3 / ECAN receive (alternate) / CTMU edge 2 input / external interrupt 3. |+| 37 | RB4/AN9/CTPLS/KBI0 | bidirectional | Port B bit 4 / ADC analog channel 9 / CTMU pulse output / interrupt-on-change bit 0. |+| 38 | RB5/T0CKI/T3CKI/CCP5/KBI1 | bidirectional | Port B bit 5 / Timer0 external clock input / Timer3 external clock input / CCP5 Capture/Compare/PWM I/O / interrupt-on-change bit 1. |+| 39 | RB6/PGC/KBI2 | bidirectional | Port B bit 6 / ICSP programming clock / in-circuit debug clock / interrupt-on-change bit 2. |+| 40 | RB7/PGD/T3G/KBI3 | bidirectional | Port B bit 7 / ICSP programming data / in-circuit debug data / Timer3 external gate input / interrupt-on-change bit 3. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip |+| Package | TQFP-44(10x10) |+| Category | MCU |+| Pins | 40 |++## Ordering variants++- `PIC18F45K80-II/P`+- `PIC18F45K80-II/PT`+- `PIC18F45K80-II/ML`++## CAD (KiCad official)++- Symbol: `PIC18F45K80-I`+- Footprint: `Package_QFP:TQFP-44_10x10mm_P0.8mm`+- 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip datasheet](docs/pic18f45k80-i-datasheet.pdf) (628 pp, sha256 `762822c73d67ca56`, retrieved 2026-08-17, tier: manufacturer)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pic18f45k80-i-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "pic18f45k80-i",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip Microcontrollers (MCU/MPU/SOC), TQFP-44(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "mcu",+    "pic18f45k80-i"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pic18f45k80-i.kicad_sym",+    "pic18f45k80-i.kicad_mod",+    "pic18f45k80-i.glb",+    "pic18f45k80-i.step",+    "pic18f45k80-i.lbr",+    "docs/hero.png",+    "docs/pic18f45k80-i-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file