← Commit history
README.md+72−74
@@ -2,40 +2,40 @@  **Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil -PIC18F26Q10T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+PIC18F26Q10T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | RE3/MCLR/VPP | input | Read-only PORTE bit RE3 that serves as the MCLR/VPP input; when MCLR is enabled it is connected to VDD through an internal weak pull-up with a noise filter, and when MCLR is disabled it becomes input-only. |-| 2 | RA0 | bidirectional | General-purpose I/O with analog input ANA0, comparator inputs C1IN0- and C2IN0-, interrupt-on-change IOCA0, and weak pull-up; ANSELA defaults to analog mode after reset. |-| 3 | RA1 | bidirectional | General-purpose I/O with analog input ANA1, comparator inputs C1IN1- and C2IN1-, interrupt-on-change IOCA1, and weak pull-up; ANSELA defaults to analog mode after reset. |-| 4 | RA2 | bidirectional | General-purpose I/O with analog input ANA2, DAC1OUT1, VREF- (DAC and ADC), comparator inputs C1IN0+ and C2IN0+, interrupt-on-change IOCA2, and weak pull-up. |-| 5 | RA3 | bidirectional | General-purpose I/O with analog input ANA3, VREF+ (DAC and ADC), comparator input C1IN1+, interrupt-on-change IOCA3, DSM carrier-low output MDCARL (PPS), and weak pull-up. |-| 6 | RA4 | bidirectional | General-purpose I/O with analog input ANA4, Timer0 clock input T0CKI (PPS), interrupt-on-change IOCA4, DSM carrier-high output MDCARH (PPS), and weak pull-up. |-| 7 | RA5 | bidirectional | General-purpose I/O with analog input ANA5, interrupt-on-change IOCA5, DSM source output MDSRC (PPS), MSSP1 client select SS1 (PPS), and weak pull-up. |+| 1 | RE3 | input | Read-only RE3 input (also VPP/MCLR) that is available only when MCLR functionality is disabled; it supports interrupt-on-change (IOCE3) and has a pull-up option. |+| 2 | RA0 | bidirectional | PORTA bit 0 with analog input ANA0, comparator inputs C1IN0- and C2IN0-, interrupt-on-change IOCA0, and a pull-up option. |+| 3 | RA1 | bidirectional | PORTA bit 1 with analog input ANA1, comparator inputs C1IN1- and C2IN1-, interrupt-on-change IOCA1, and a pull-up option. |+| 4 | RA2 | bidirectional | PORTA bit 2 with analog input ANA2, DAC1OUT1 output, VREF- (DAC/ADC) negative reference, comparator inputs C1IN0+ and C2IN0+, interrupt-on-change IOCA2, and a pull-up option. |+| 5 | RA3 | bidirectional | PORTA bit 3 with analog input ANA3, VREF+ (DAC/ADC) positive reference, comparator input C1IN1+, PPS-selectable DSM carrier-low output MDCARL, interrupt-on-change IOCA3, and a pull-up option. |+| 6 | RA4 | bidirectional | PORTA bit 4 with analog input ANA4, PPS-remappable Timer0 clock input T0CKI, PPS-selectable DSM carrier-high output MDCARH, interrupt-on-change IOCA4, and a pull-up option. |+| 7 | RA5 | bidirectional | PORTA bit 5 with analog input ANA5, PPS-selectable DSM source output MDSRC, PPS-remappable MSSP1 slave select SS1, interrupt-on-change IOCA5, and a pull-up option. | | 8 | VSS | power_in | Ground supply pin; all VSS pins must be connected in the application. |-| 9 | RA7 | bidirectional | General-purpose I/O with analog input ANA7, interrupt-on-change IOCA7, and weak pull-up; it is also OSC1/CLKIN, available only in select oscillator modes. |-| 10 | RA6 | bidirectional | General-purpose I/O with analog input ANA6, interrupt-on-change IOCA6, and weak pull-up; it is also OSC2/CLKOUT, available only in select oscillator modes. |-| 11 | RC0 | bidirectional | General-purpose I/O with analog input ANC0, Timer1 clock T1CKI, Timer3 clock T3CKI and gate T3G (PPS), interrupt-on-change IOCC0, weak pull-up, and secondary oscillator output SOSCO. |-| 12 | RC1 | bidirectional | General-purpose I/O with analog input ANC1, CCP2 output (PPS), interrupt-on-change IOCC1, weak pull-up, and secondary oscillator pins SOSCIN/SOSCI. |-| 13 | RC2 | bidirectional | General-purpose I/O with analog input ANC2, Timer5 clock T5CKI (PPS), CCP1 output (PPS), interrupt-on-change IOCC2, and weak pull-up. |-| 14 | RC3 | bidirectional | General-purpose I/O with analog input ANC3, Timer2 input T2IN (PPS), interrupt-on-change IOCC3, weak pull-up, and MSSP1 SCK/SCL (bidirectional, I2C logic levels). |-| 15 | RC4 | bidirectional | General-purpose I/O with analog input ANC4, interrupt-on-change IOCC4, weak pull-up, and MSSP1 SDI/SDA (bidirectional, I2C logic levels). |-| 16 | RC5 | bidirectional | General-purpose I/O with analog input ANC5, Timer4 input T4IN (PPS), interrupt-on-change IOCC5, and weak pull-up. |-| 17 | RC6 | bidirectional | General-purpose I/O with analog input ANC6, interrupt-on-change IOCC6, weak pull-up, and EUSART1 clock CK1 (bidirectional, PPS). |-| 18 | RC7 | bidirectional | General-purpose I/O with analog input ANC7, interrupt-on-change IOCC7, weak pull-up, and EUSART1 receive/data RX1/DT1 (bidirectional, PPS). |+| 9 | RA7 | bidirectional | PORTA bit 7 with analog input ANA7, OSC1/CLKIN oscillator input in select oscillator modes, interrupt-on-change IOCA7, and a pull-up option. |+| 10 | RA6 | bidirectional | PORTA bit 6 with analog input ANA6, OSC2/CLKOUT oscillator output or clock output in select oscillator modes, interrupt-on-change IOCA6, and a pull-up option. |+| 11 | RC0 | bidirectional | PORTC bit 0 with analog input ANC0, PPS-remappable Timer1/Timer3 clock inputs T1CKI and T3CKI, Timer3 gate input T3G, secondary oscillator output SOSCO, interrupt-on-change IOCC0, and a pull-up option. |+| 12 | RC1 | bidirectional | PORTC bit 1 with analog input ANC1, PPS-selectable CCP2 output, secondary oscillator input SOSCIN/SOSCI, interrupt-on-change IOCC1, and a pull-up option. |+| 13 | RC2 | bidirectional | PORTC bit 2 with analog input ANC2, PPS-remappable Timer5 clock input T5CKI, PPS-selectable CCP1 output, interrupt-on-change IOCC2, and a pull-up option. |+| 14 | RC3 | bidirectional | PORTC bit 3 with analog input ANC3, PPS-remappable Timer2 input T2IN, MSSP1 clock SCK1/SCL1 (bidirectional, I2C logic levels), interrupt-on-change IOCC3, and a pull-up option. |+| 15 | RC4 | bidirectional | PORTC bit 4 with analog input ANC4, MSSP1 data SDI1/SDA1 (bidirectional, I2C logic levels), interrupt-on-change IOCC4, and a pull-up option. |+| 16 | RC5 | bidirectional | PORTC bit 5 with analog input ANC5, PPS-remappable Timer4 input T4IN, interrupt-on-change IOCC5, and a pull-up option. |+| 17 | RC6 | bidirectional | PORTC bit 6 with analog input ANC6, EUSART1 clock CK1 (bidirectional), interrupt-on-change IOCC6, and a pull-up option. |+| 18 | RC7 | bidirectional | PORTC bit 7 with analog input ANC7, EUSART1 receive/data RX1/DT1 (bidirectional), interrupt-on-change IOCC7, and a pull-up option. | | 19 | VSS | power_in | Ground supply pin; all VSS pins must be connected in the application. | | 20 | VDD | power_in | Positive supply pin; a 0.1 µF bypass capacitor to VSS is required on the VDD pin. |-| 21 | RB0 | bidirectional | General-purpose I/O with analog input ANB0, comparator input C2IN1+, CWG1 input (PPS), ZCD input ZCDIN, interrupt-on-change IOCB0, external interrupt INT0 (PPS), MSSP2 client select SS2 (PPS), and weak pull-up. |-| 22 | RB1 | bidirectional | General-purpose I/O with analog input ANB1, comparator inputs C1IN3- and C2IN3-, interrupt-on-change IOCB1, external interrupt INT1 (PPS), MSSP2 SCK/SCL (I2C logic levels), and weak pull-up. |-| 23 | RB2 | bidirectional | General-purpose I/O with analog input ANB2, interrupt-on-change IOCB2, external interrupt INT2 (PPS), MSSP2 SDI/SDA (I2C logic levels), and weak pull-up. |-| 24 | RB3 | bidirectional | General-purpose I/O with analog input ANB3, comparator inputs C1IN2- and C2IN2-, interrupt-on-change IOCB3, and weak pull-up. |-| 25 | RB4 | bidirectional | General-purpose I/O with analog input ANB4, Timer5 gate T5G (PPS), interrupt-on-change IOCB4, and weak pull-up. |-| 26 | RB5 | bidirectional | General-purpose I/O with analog input ANB5, Timer1 gate T1G (PPS), interrupt-on-change IOCB5, and weak pull-up. |-| 27 | RB6 | bidirectional | General-purpose I/O with analog input ANB6, interrupt-on-change IOCB6, weak pull-up, EUSART2 clock CK2 (bidirectional, PPS), and ICSPCLK for in-circuit serial programming. |-| 28 | RB7 | bidirectional | General-purpose I/O with analog input ANB7, DAC1OUT2, Timer6 input T6IN (PPS), interrupt-on-change IOCB7, weak pull-up, EUSART2 receive/data RX2/DT2 (bidirectional, PPS), and ICSPDAT for in-circuit serial programming. |+| 21 | RB0 | bidirectional | PORTB bit 0 with analog input ANB0, comparator input C2IN1+, PPS-remappable CWG1 input, ZCD input ZCDIN, external interrupt INT0, MSSP2 slave select SS2, interrupt-on-change IOCB0, and a pull-up option. |+| 22 | RB1 | bidirectional | PORTB bit 1 with analog input ANB1, comparator inputs C1IN3- and C2IN3-, external interrupt INT1, MSSP2 clock SCK2/SCL2 (bidirectional, I2C logic levels), interrupt-on-change IOCB1, and a pull-up option. |+| 23 | RB2 | bidirectional | PORTB bit 2 with analog input ANB2, external interrupt INT2, MSSP2 data SDI2/SDA2 (bidirectional, I2C logic levels), interrupt-on-change IOCB2, and a pull-up option. |+| 24 | RB3 | bidirectional | PORTB bit 3 with analog input ANB3, comparator inputs C1IN2- and C2IN2-, interrupt-on-change IOCB3, and a pull-up option. |+| 25 | RB4 | bidirectional | PORTB bit 4 with analog input ANB4, PPS-remappable Timer5 gate input T5G, interrupt-on-change IOCB4, and a pull-up option. |+| 26 | RB5 | bidirectional | PORTB bit 5 with analog input ANB5, PPS-remappable Timer1 gate input T1G, interrupt-on-change IOCB5, and a pull-up option. |+| 27 | RB6 | bidirectional | PORTB bit 6 with analog input ANB6, EUSART2 clock CK2 (bidirectional), interrupt-on-change IOCB6, and a pull-up option; it is also the ICSPCLK programming clock pin. |+| 28 | RB7 | bidirectional | PORTB bit 7 with analog input ANB7, DAC1OUT2 output, PPS-remappable Timer6 input T6IN, EUSART2 receive/data RX2/DT2 (bidirectional), interrupt-on-change IOCB7, and a pull-up option; it is also the ICSPDAT programming data pin. |  ## Key specifications @@ -54,64 +54,62 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries |---|---|---|---|---|---|---|---| | Ambient temperature under bias |  | -40 |  | 125 | °C |  | 694 | | Storage temperature |  | -65 |  | 150 | °C |  | 694 |-| Voltage on VDD pin with respect to VSS | VDD | -0.3 |  | 6.5 | V |  | 694 |-| Voltage on MCLR pin with respect to VSS |  | -0.3 |  | 9 | V |  | 694 |-| Voltage on all other pins with respect to VSS |  | -0.3 |  |  | V | Printed maximum is VDD + 0.3V (expression, no number) | 694 |+| Voltage on VDD pin with respect to VSS | VDD | -0.3 |  | 6.5 | V | with respect to VSS | 694 |+| Voltage on MCLR pin with respect to VSS |  | -0.3 |  | 9 | V | with respect to VSS | 694 |+| Voltage on all other pins with respect to VSS |  | -0.3 |  |  | V | printed maximum is (VDD + 0.3V); see review_required | 694 | | Maximum current on VSS pin |  |  |  | 350 | mA | -40°C ≤ TA ≤ +85°C | 694 |+| Maximum current on VSS pin |  |  |  | 120 | mA | 85°C < TA ≤ +125°C | 694 | | Maximum current on VDD pin (28-pin devices) | VDD |  |  | 250 | mA | -40°C ≤ TA ≤ +85°C | 694 |-| Maximum current on any standard I/O pin |  | -50 |  | 50 | mA | Printed ±50 mA | 694 |-| Clamp current IK | IK | -20 |  | 20 | mA | VPIN < 0 or VPIN > VDD | 694 |+| Maximum current on VDD pin (28-pin devices) | VDD |  |  | 85 | mA | 85°C < TA ≤ +125°C | 694 |+| Maximum current on any standard I/O pin |  | -50 |  | 50 | mA |  | 694 |+| Clamp current, IK | IK | -20 |  | 20 | mA | VPIN < 0 or VPIN > VDD | 694 | | Total power dissipation |  |  |  | 800 | mW |  | 694 |-| VDD operating supply voltage | VDD | 1.8 |  | 5.5 | V | Standard operating conditions (D002) | 695 |+| Operating supply voltage VDD | VDD | 1.8 |  | 5.5 | V |  | 695 |+| Operating ambient temperature range, Industrial | TA | -40 |  | 85 | °C | Industrial temperature range | 695 |+| Operating ambient temperature range, Extended | TA | -40 |  | 125 | °C | Extended temperature range | 695 |+| System clock frequency | FOSC |  |  | 64 | MHz | Notes 2, 3 | 701 | | RAM data retention voltage | VDR | 1.7 |  |  | V | Device in SLEEP mode | 695 |-| VDD rise rate to ensure internal Power-on Reset | SVDD | 0.05 |  |  | V/ms | BOR and LPBOR disabled | 696 |-| Operating ambient temperature range, industrial | TA | -40 |  | 85 | °C | Industrial temperature range (-I) | 695 |-| Supply current, XT oscillator 4 MHz | IDDXT4 |  | 490 | 770 | μA | XT = 4 MHz; 3.0V | 696 |-| Supply current, HFINTOSC 16 MHz | IDDHFO16 |  | 1.3 | 1.7 | mA | HFINTOSC = 16 MHz; 3.0V | 696 |-| Supply current, HFINTOSC 64 MHz PLL | IDDHFOPLL |  | 4.4 | 5.8 | mA | HFINTOSC = 64 MHz; 3.0V | 696 |-| Supply current, HS+PLL 64 MHz | IDDHSPLL64 |  | 4.3 | 5.7 | mA | HS + PLL = 64 MHz; 3.0V | 696 |-| Power-down current, IPD base | IPD |  | 0.6 | 4 | μA | Max at +85°C; 3.0V; VREGPM b'10' | 697 |-| Power-down current, low-frequency internal oscillator/WDT | IPD_WDT |  | 0.9 | 5 | μA | Max at +85°C; 3.0V; VREGPM b'10' | 697 |-| Power-down current, secondary oscillator (SOSC) | IPD_SOSC |  | 1.6 | 4.3 | μA | Max at +85°C; 3.0V; SOSCPWR = 0; characterized, not tested | 697 |-| Power-down current, low-power BOR | IPD_LPBOR |  | 0.9 | 5 | μA | Max at +85°C; 3.0V; VREGPM b'10' | 697 |-| Power-down current, FVR | IPD_FVR |  | 70 | 105 | μA | Max at +85°C; 3.0V; VREGPM b'10' or b'01'; FVRCON = 0x81 or 0x84 | 697 |-| Power-down current, brown-out reset | IPD_BOR |  | 30 | 60 | μA | Max at +85°C; 3.0V; VREGPM b'10' | 697 |-| Power-down current, comparator | IPD_CMP |  | 60 | 85 | μA | 3.0V; VREGPM b'10' | 698 |+| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 |  |  | V/ms | BOR and LPBOR disabled | 696 |+| Supply current, XT = 4 MHz | IDDXT4 |  | 490 | 770 | μA | 3.0V | 696 |+| Supply current, HFINTOSC = 16 MHz | IDDHFO16 |  | 1.3 | 1.7 | mA | 3.0V | 696 |+| Supply current, HFINTOSC = 64 MHz | IDDHFOPLL |  | 4.4 | 5.8 | mA | 3.0V | 696 |+| Supply current, HS + PLL = 64 MHz | IDDHSPLL64 |  | 4.3 | 5.7 | mA | 3.0V | 697 |+| Power-down current IPD base, VREGPM = b'10' | IPD |  | 0.6 | 4 | μA | 3.0V b'10', Max +85°C column | 697 |+| Power-down current IPD base, VREGPM = b'10' | IPD |  |  | 12 | μA | 3.0V b'10', Max +125°C column | 697 |+| Power-down current IPD base, VREGPM = b'01' | IPD |  | 50 | 90 | μA | 3.0V b'01', Max +125°C column | 697 |+| Power-down current IPD base, VREGPM = b'00' | IPD |  | 170 | 280 | μA | 3.0V b'00', Max +125°C column | 697 |+| Power-down current, Low-Frequency Internal Oscillator/WDT | IPD_WDT |  | 0.9 | 5 | μA | 3.0V b'10', Max +85°C column | 697 |+| Power-down current, Low-Frequency Internal Oscillator/WDT | IPD_WDT |  |  | 13 | μA | 3.0V b'10', Max +125°C column | 697 |+| Power-down current, Secondary Oscillator (SOSC) | IPD_SOSC |  | 1.6 | 4.3 | μA | 3.0V b'10', SOSCPWR = 0, Max +85°C column | 697 |+| Power-down current, Secondary Oscillator (SOSC) | IPD_SOSC |  |  | 10 | μA | 3.0V b'10', SOSCPWR = 0, Max +125°C column | 697 |+| Power-down current, Low-Power Brown-out Reset (LPBOR) | IPD_LPBOR |  | 0.9 | 5 | μA | 3.0V b'10', Max +85°C column | 697 |+| Power-down current, Low-Power Brown-out Reset (LPBOR) | IPD_LPBOR |  |  | 13 | μA | 3.0V b'10', Max +125°C column | 697 |+| Power-down current, FVR | IPD_FVR |  | 70 | 105 | μA | 3.0V b'10' or b'01', FVRCON = 0x81 or 0x84, Max +85°C column | 697 |+| Power-down current, FVR | IPD_FVR |  |  | 110 | μA | 3.0V b'10' or b'01', FVRCON = 0x81 or 0x84, Max +125°C column | 697 |+| Power-down current, Brown-out Reset (BOR) | IPD_BOR |  | 30 | 60 | μA | 3.0V b'10', Max +85°C column | 697 |+| Power-down current, Brown-out Reset (BOR) | IPD_BOR |  |  | 63 | μA | 3.0V b'10', Max +125°C column | 697 |+| Power-down current, Comparator | IPD_CMP |  | 60 | 85 | μA | 3.0V b'10', Max +85°C column | 698 |+| Power-down current, Comparator | IPD_CMP |  |  | 90 | μA | 3.0V b'10', Max +125°C column | 698 | | Input low voltage, I/O port with TTL buffer | VIL |  |  | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 698 | | Input low voltage, I/O port with SMBus levels | VIL |  |  | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 698 | | Input high voltage, I/O port with TTL buffer | VIH | 2 |  |  | V | 4.5V ≤ VDD ≤ 5.5V | 698 | | Input high voltage, I/O port with SMBus levels | VIH | 2.1 |  |  | V | 2.7V ≤ VDD ≤ 5.5V | 698 |-| Input leakage current, I/O ports | IIL | -125 |  | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 699 |-| Input leakage current, MCLR | IIL | -200 |  | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 699 |+| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 699 |+| Input leakage current, I/O ports | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C | 699 |+| Input leakage current, MCLR pin | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 699 | | Weak pull-up current | IPUR | 80 | 140 | 200 | μA | VDD = 3.0V, VPIN = VSS | 699 | | Output low voltage, I/O ports | VOL |  |  | 0.6 | V | IOL = 10.0 mA, VDD = 3.0V | 699 | | Pin capacitance, all I/O pins | CIO |  | 5 | 50 | pF |  | 699 |-| DataEE byte endurance | ED | 100 |  |  | k E/W | -40°C ≤ TA ≤ +85°C | 699 |-| Total erase/write cycles before refresh (DataEE) | ND_REF | 1 |  |  | M E/W | -40°C ≤ TA ≤ +85°C | 699 |-| Flash memory cell endurance | EP | 10 |  |  | k E/W | -40°C ≤ TA ≤ +85°C (Note 1) | 699 |-| Byte erase and write cycle time | TD_BEW |  | 10 | 11 | ms |  | 699 |-| Self-timed sector write | TP_REW |  | 6 | 10 | ms |  | 699 |-| Self-timed sector erase | TSE |  | 10 | 14 | ms |  | 699 |-| Self-timed word write | TP_WRD |  | 55 | 80 | μs |  | 699 |-| Thermal resistance junction to ambient, 28-pin SSOP | θJA |  | 90 |  | °C/W | 28-pin SSOP package | 700 |-| Maximum junction temperature | TJMAX |  | 150 |  | °C | Printed in the Typ. column | 700 |-| System clock frequency, ECL oscillator | FECL |  |  | 1 | MHz | ECL oscillator | 701 |-| System clock frequency, ECM oscillator | FECM |  |  | 16 | MHz | ECM oscillator | 701 |-| System clock frequency, ECH oscillator | FECH |  |  | 64 | MHz | ECH oscillator | 701 |-| Clock frequency, XT oscillator | FXT |  |  | 4 | MHz | Note 4 | 701 |-| Clock frequency, HS oscillator | FHS |  |  | 20 | MHz | VDD > 2.5V; Note 4 | 701 |-| Secondary oscillator clock frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Note 4 | 701 |-| System clock frequency | FOSC |  |  | 64 | MHz | Note 2, Note 3 | 701 |-| Instruction cycle period | TCY | 62.5 |  |  | ns |  | 701 |-| PLL input frequency range | FPLLIN | 4 |  | 16 | MHz |  | 703 |-| PLL output frequency range | FPLLOUT | 16 |  | 64 | MHz | Note 1 | 703 |-| Brown-out reset voltage, BORV = 00 | VBOR | 2.7 | 2.85 | 3 | V | BORV = 00 | 706 |-| Low-power brown-out reset voltage | VLPBOR | 1.8 | 1.9 | 2.2 | V |  | 706 |-| ADC integral non-linearity error | EIL | -1 |  | 1 | LSb | ADCREF+ = 3.0V, ADCREF- = 0V | 707 |-| ADC offset error | EOFF | -2 | 0.5 | 2 | LSb | ADCREF+ = 3.0V, ADCREF- = 0V | 707 |-| ADC clock period, FOSC-based | TAD | 1 |  | 9 | μs | Using FOSC as ADC clock source, ADOCS = 0 | 707 |-| Comparator input offset voltage | VIOFF | -30 |  | 30 | mV | VICM = VDD/2; VDD = 3.0V, TA = 25°C | 708 |-| Comparator hysteresis | VHYST | 10 | 25 | 40 | mV | VDD = 3.0V, TA = 25°C | 709 |+| Self-timed sector write time | TP_REW |  | 6 | 10 | ms |  | 699 |+| Self-timed sector erase time | TSE |  | 10 | 14 | ms |  | 699 |+| Brown-out Reset voltage | VBOR | 2.7 | 2.85 | 3 | V | BORV = 00 | 706 |+| Brown-out Reset voltage | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 01 | 706 |+| Brown-out Reset voltage | VBOR | 2.3 | 2.45 | 2.6 | V | BORV = 10 | 706 |+| Brown-out Reset voltage | VBOR | 1.8 | 1.9 | 2.1 | V | BORV = 11 | 706 |+| Low-Power Brown-out Reset voltage | VLPBOR | 1.8 | 1.9 | 2.2 | V |  | 706 |+| FVR accuracy, 1x gain (1.024V) | VFVR1 | -4 |  | 4 | % | VDD ≥ 2.5V, -40°C to 85°C | 709 |+| Thermal resistance junction to ambient, 28-pin SSOP package | θJA |  | 90 |  | °C/W | 28-pin SSOP package | 700 |+| Maximum junction temperature | TJMAX |  | 150 |  | °C |  | 700 |  ## Materials and finish @@ -132,7 +130,7 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18F26-45-46-Q10-Data-Sheet-DS40001996.pdf) (770 pp, sha256 `3b107140e4098e35`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18F26-45-46-Q10-Data-Sheet-DS40001996.pdf) (770 pp, sha256 `3b107140e4098e35`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+37−38
@@ -1,6 +1,6 @@ {   "slug": "pic18f26q10t-i-ss",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic18f26q10t-i-ss-hero.glb",-    "pic18f26q10t-i-ss-hero.overlay.json",-    "pic18f26q10t-i-ss-etched.glb"+    "pic18f26q10t-i-ss-hero.overlay.json"   ],   "component": {     "mpn": "PIC18F26Q10T-I/SS",@@ -43,7 +42,7 @@       "symbol": "pic18f26q10t-i-ss.kicad_sym",       "footprint": "pic18f26q10t-i-ss.kicad_mod",       "model_3d": "pic18f26q10t-i-ss-hero.glb",-      "model_3d_plain": "pic18f26q10t-i-ss-etched.glb",+      "model_3d_plain": "pic18f26q10t-i-ss.glb",       "model_3d_step": "pic18f26q10t-i-ss-etched.step",       "model_3d_step_plain": "pic18f26q10t-i-ss.step",       "lbr": "pic18f26q10t-i-ss.lbr"@@ -54,7 +53,7 @@       "mouser": "579-PIC18F26Q10TISS"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:58:21Z",+      "checked_at": "2026-11-17T19:01:48Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC18F26Q10T-I/SSTR-ND",@@ -69,45 +68,45 @@     "pins": [       {         "number": "1",-        "name": "RE3/MCLR/VPP",+        "name": "RE3",         "type": "input",-        "description": "Read-only PORTE bit RE3 that serves as the MCLR/VPP input; when MCLR is enabled it is connected to VDD through an internal weak pull-up with a noise filter, and when MCLR is disabled it becomes input-only."+        "description": "Read-only RE3 input (also VPP/MCLR) that is available only when MCLR functionality is disabled; it supports interrupt-on-change (IOCE3) and has a pull-up option."       },       {         "number": "2",         "name": "RA0",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA0, comparator inputs C1IN0- and C2IN0-, interrupt-on-change IOCA0, and weak pull-up; ANSELA defaults to analog mode after reset."+        "description": "PORTA bit 0 with analog input ANA0, comparator inputs C1IN0- and C2IN0-, interrupt-on-change IOCA0, and a pull-up option."       },       {         "number": "3",         "name": "RA1",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA1, comparator inputs C1IN1- and C2IN1-, interrupt-on-change IOCA1, and weak pull-up; ANSELA defaults to analog mode after reset."+        "description": "PORTA bit 1 with analog input ANA1, comparator inputs C1IN1- and C2IN1-, interrupt-on-change IOCA1, and a pull-up option."       },       {         "number": "4",         "name": "RA2",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA2, DAC1OUT1, VREF- (DAC and ADC), comparator inputs C1IN0+ and C2IN0+, interrupt-on-change IOCA2, and weak pull-up."+        "description": "PORTA bit 2 with analog input ANA2, DAC1OUT1 output, VREF- (DAC/ADC) negative reference, comparator inputs C1IN0+ and C2IN0+, interrupt-on-change IOCA2, and a pull-up option."       },       {         "number": "5",         "name": "RA3",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA3, VREF+ (DAC and ADC), comparator input C1IN1+, interrupt-on-change IOCA3, DSM carrier-low output MDCARL (PPS), and weak pull-up."+        "description": "PORTA bit 3 with analog input ANA3, VREF+ (DAC/ADC) positive reference, comparator input C1IN1+, PPS-selectable DSM carrier-low output MDCARL, interrupt-on-change IOCA3, and a pull-up option."       },       {         "number": "6",         "name": "RA4",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA4, Timer0 clock input T0CKI (PPS), interrupt-on-change IOCA4, DSM carrier-high output MDCARH (PPS), and weak pull-up."+        "description": "PORTA bit 4 with analog input ANA4, PPS-remappable Timer0 clock input T0CKI, PPS-selectable DSM carrier-high output MDCARH, interrupt-on-change IOCA4, and a pull-up option."       },       {         "number": "7",         "name": "RA5",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA5, interrupt-on-change IOCA5, DSM source output MDSRC (PPS), MSSP1 client select SS1 (PPS), and weak pull-up."+        "description": "PORTA bit 5 with analog input ANA5, PPS-selectable DSM source output MDSRC, PPS-remappable MSSP1 slave select SS1, interrupt-on-change IOCA5, and a pull-up option."       },       {         "number": "8",@@ -119,61 +118,61 @@         "number": "9",         "name": "RA7",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA7, interrupt-on-change IOCA7, and weak pull-up; it is also OSC1/CLKIN, available only in select oscillator modes."+        "description": "PORTA bit 7 with analog input ANA7, OSC1/CLKIN oscillator input in select oscillator modes, interrupt-on-change IOCA7, and a pull-up option."       },       {         "number": "10",         "name": "RA6",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA6, interrupt-on-change IOCA6, and weak pull-up; it is also OSC2/CLKOUT, available only in select oscillator modes."+        "description": "PORTA bit 6 with analog input ANA6, OSC2/CLKOUT oscillator output or clock output in select oscillator modes, interrupt-on-change IOCA6, and a pull-up option."       },       {         "number": "11",         "name": "RC0",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC0, Timer1 clock T1CKI, Timer3 clock T3CKI and gate T3G (PPS), interrupt-on-change IOCC0, weak pull-up, and secondary oscillator output SOSCO."+        "description": "PORTC bit 0 with analog input ANC0, PPS-remappable Timer1/Timer3 clock inputs T1CKI and T3CKI, Timer3 gate input T3G, secondary oscillator output SOSCO, interrupt-on-change IOCC0, and a pull-up option."       },       {         "number": "12",         "name": "RC1",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC1, CCP2 output (PPS), interrupt-on-change IOCC1, weak pull-up, and secondary oscillator pins SOSCIN/SOSCI."+        "description": "PORTC bit 1 with analog input ANC1, PPS-selectable CCP2 output, secondary oscillator input SOSCIN/SOSCI, interrupt-on-change IOCC1, and a pull-up option."       },       {         "number": "13",         "name": "RC2",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC2, Timer5 clock T5CKI (PPS), CCP1 output (PPS), interrupt-on-change IOCC2, and weak pull-up."+        "description": "PORTC bit 2 with analog input ANC2, PPS-remappable Timer5 clock input T5CKI, PPS-selectable CCP1 output, interrupt-on-change IOCC2, and a pull-up option."       },       {         "number": "14",         "name": "RC3",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC3, Timer2 input T2IN (PPS), interrupt-on-change IOCC3, weak pull-up, and MSSP1 SCK/SCL (bidirectional, I2C logic levels)."+        "description": "PORTC bit 3 with analog input ANC3, PPS-remappable Timer2 input T2IN, MSSP1 clock SCK1/SCL1 (bidirectional, I2C logic levels), interrupt-on-change IOCC3, and a pull-up option."       },       {         "number": "15",         "name": "RC4",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC4, interrupt-on-change IOCC4, weak pull-up, and MSSP1 SDI/SDA (bidirectional, I2C logic levels)."+        "description": "PORTC bit 4 with analog input ANC4, MSSP1 data SDI1/SDA1 (bidirectional, I2C logic levels), interrupt-on-change IOCC4, and a pull-up option."       },       {         "number": "16",         "name": "RC5",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC5, Timer4 input T4IN (PPS), interrupt-on-change IOCC5, and weak pull-up."+        "description": "PORTC bit 5 with analog input ANC5, PPS-remappable Timer4 input T4IN, interrupt-on-change IOCC5, and a pull-up option."       },       {         "number": "17",         "name": "RC6",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC6, interrupt-on-change IOCC6, weak pull-up, and EUSART1 clock CK1 (bidirectional, PPS)."+        "description": "PORTC bit 6 with analog input ANC6, EUSART1 clock CK1 (bidirectional), interrupt-on-change IOCC6, and a pull-up option."       },       {         "number": "18",         "name": "RC7",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC7, interrupt-on-change IOCC7, weak pull-up, and EUSART1 receive/data RX1/DT1 (bidirectional, PPS)."+        "description": "PORTC bit 7 with analog input ANC7, EUSART1 receive/data RX1/DT1 (bidirectional), interrupt-on-change IOCC7, and a pull-up option."       },       {         "number": "19",@@ -191,49 +190,49 @@         "number": "21",         "name": "RB0",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB0, comparator input C2IN1+, CWG1 input (PPS), ZCD input ZCDIN, interrupt-on-change IOCB0, external interrupt INT0 (PPS), MSSP2 client select SS2 (PPS), and weak pull-up."+        "description": "PORTB bit 0 with analog input ANB0, comparator input C2IN1+, PPS-remappable CWG1 input, ZCD input ZCDIN, external interrupt INT0, MSSP2 slave select SS2, interrupt-on-change IOCB0, and a pull-up option."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB1, comparator inputs C1IN3- and C2IN3-, interrupt-on-change IOCB1, external interrupt INT1 (PPS), MSSP2 SCK/SCL (I2C logic levels), and weak pull-up."+        "description": "PORTB bit 1 with analog input ANB1, comparator inputs C1IN3- and C2IN3-, external interrupt INT1, MSSP2 clock SCK2/SCL2 (bidirectional, I2C logic levels), interrupt-on-change IOCB1, and a pull-up option."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB2, interrupt-on-change IOCB2, external interrupt INT2 (PPS), MSSP2 SDI/SDA (I2C logic levels), and weak pull-up."+        "description": "PORTB bit 2 with analog input ANB2, external interrupt INT2, MSSP2 data SDI2/SDA2 (bidirectional, I2C logic levels), interrupt-on-change IOCB2, and a pull-up option."       },       {         "number": "24",         "name": "RB3",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB3, comparator inputs C1IN2- and C2IN2-, interrupt-on-change IOCB3, and weak pull-up."+        "description": "PORTB bit 3 with analog input ANB3, comparator inputs C1IN2- and C2IN2-, interrupt-on-change IOCB3, and a pull-up option."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB4, Timer5 gate T5G (PPS), interrupt-on-change IOCB4, and weak pull-up."+        "description": "PORTB bit 4 with analog input ANB4, PPS-remappable Timer5 gate input T5G, interrupt-on-change IOCB4, and a pull-up option."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB5, Timer1 gate T1G (PPS), interrupt-on-change IOCB5, and weak pull-up."+        "description": "PORTB bit 5 with analog input ANB5, PPS-remappable Timer1 gate input T1G, interrupt-on-change IOCB5, and a pull-up option."       },       {         "number": "27",         "name": "RB6",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB6, interrupt-on-change IOCB6, weak pull-up, EUSART2 clock CK2 (bidirectional, PPS), and ICSPCLK for in-circuit serial programming."+        "description": "PORTB bit 6 with analog input ANB6, EUSART2 clock CK2 (bidirectional), interrupt-on-change IOCB6, and a pull-up option; it is also the ICSPCLK programming clock pin."       },       {         "number": "28",         "name": "RB7",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB7, DAC1OUT2, Timer6 input T6IN (PPS), interrupt-on-change IOCB7, weak pull-up, EUSART2 receive/data RX2/DT2 (bidirectional, PPS), and ICSPDAT for in-circuit serial programming."+        "description": "PORTB bit 7 with analog input ANB7, DAC1OUT2 output, PPS-remappable Timer6 input T6IN, EUSART2 receive/data RX2/DT2 (bidirectional), interrupt-on-change IOCB7, and a pull-up option; it is also the ICSPDAT programming data pin."       }     ],     "provenance": {@@ -247,11 +246,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin numbers are the SSOP/SOIC/SPDIP column of Table 3 (28-Pin Allocation Table) on pages 5-6. The (V; Pin 1 is RE3, which is input-only and doubles as MCLR/VPP. It is typed 'input' because the datasheet; Some functions are PPS-remappable (Table 3 notes 1 and 2), so the listed pin is only the default loc"+          "extractor flagged: Pin numbers are taken from the 28-Pin SPDIP/SOIC/SSOP column of Table 3 (pages 5-6), which the datas; RE3 (pin 1) is input-only and is available only when MCLR is disabled (Figure 2-1 note and CONFIG2 M"         ],-        "pages_sent": 69,-        "cost_usd": 0.2706,-        "at": "2026-11-12T04:57:51"+        "pages_sent": 70,+        "cost_usd": 0.2777,+        "at": "2026-11-17T19:00:49"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18F26-45-46-Q10-Data-Sheet-DS40001996.pdf",@@ -288,7 +287,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -306,8 +305,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "6051f6201fc2433cf4f7c307aacba7b381f0c569b7ed5262cb46495f16fed920",-        "checked": "2026-11-12",+        "sha256": "18fa30d9548f7231bc7112b188e9ff0e2cbcc48620080225931b3480ec93b734",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+40−39
@@ -4,7 +4,7 @@   "slug": "pic18f26q10t-i-ss",   "title": "PIC18F26Q10T-I/SS",   "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "pic18f26q10t-i-ss.kicad_sym",       "footprint": "pic18f26q10t-i-ss.kicad_mod",       "model_3d": "pic18f26q10t-i-ss-hero.glb",-      "model_3d_plain": "pic18f26q10t-i-ss-etched.glb",+      "model_3d_plain": "pic18f26q10t-i-ss.glb",       "model_3d_step": "pic18f26q10t-i-ss-etched.step",       "model_3d_step_plain": "pic18f26q10t-i-ss.step",       "lbr": "pic18f26q10t-i-ss.lbr"@@ -36,7 +36,7 @@       "mouser": "579-PIC18F26Q10TISS"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:58:21Z",+      "checked_at": "2026-11-17T19:01:48Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC18F26Q10T-I/SSTR-ND",@@ -51,45 +51,45 @@     "pins": [       {         "number": "1",-        "name": "RE3/MCLR/VPP",+        "name": "RE3",         "type": "input",-        "description": "Read-only PORTE bit RE3 that serves as the MCLR/VPP input; when MCLR is enabled it is connected to VDD through an internal weak pull-up with a noise filter, and when MCLR is disabled it becomes input-only."+        "description": "Read-only RE3 input (also VPP/MCLR) that is available only when MCLR functionality is disabled; it supports interrupt-on-change (IOCE3) and has a pull-up option."       },       {         "number": "2",         "name": "RA0",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA0, comparator inputs C1IN0- and C2IN0-, interrupt-on-change IOCA0, and weak pull-up; ANSELA defaults to analog mode after reset."+        "description": "PORTA bit 0 with analog input ANA0, comparator inputs C1IN0- and C2IN0-, interrupt-on-change IOCA0, and a pull-up option."       },       {         "number": "3",         "name": "RA1",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA1, comparator inputs C1IN1- and C2IN1-, interrupt-on-change IOCA1, and weak pull-up; ANSELA defaults to analog mode after reset."+        "description": "PORTA bit 1 with analog input ANA1, comparator inputs C1IN1- and C2IN1-, interrupt-on-change IOCA1, and a pull-up option."       },       {         "number": "4",         "name": "RA2",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA2, DAC1OUT1, VREF- (DAC and ADC), comparator inputs C1IN0+ and C2IN0+, interrupt-on-change IOCA2, and weak pull-up."+        "description": "PORTA bit 2 with analog input ANA2, DAC1OUT1 output, VREF- (DAC/ADC) negative reference, comparator inputs C1IN0+ and C2IN0+, interrupt-on-change IOCA2, and a pull-up option."       },       {         "number": "5",         "name": "RA3",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA3, VREF+ (DAC and ADC), comparator input C1IN1+, interrupt-on-change IOCA3, DSM carrier-low output MDCARL (PPS), and weak pull-up."+        "description": "PORTA bit 3 with analog input ANA3, VREF+ (DAC/ADC) positive reference, comparator input C1IN1+, PPS-selectable DSM carrier-low output MDCARL, interrupt-on-change IOCA3, and a pull-up option."       },       {         "number": "6",         "name": "RA4",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA4, Timer0 clock input T0CKI (PPS), interrupt-on-change IOCA4, DSM carrier-high output MDCARH (PPS), and weak pull-up."+        "description": "PORTA bit 4 with analog input ANA4, PPS-remappable Timer0 clock input T0CKI, PPS-selectable DSM carrier-high output MDCARH, interrupt-on-change IOCA4, and a pull-up option."       },       {         "number": "7",         "name": "RA5",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA5, interrupt-on-change IOCA5, DSM source output MDSRC (PPS), MSSP1 client select SS1 (PPS), and weak pull-up."+        "description": "PORTA bit 5 with analog input ANA5, PPS-selectable DSM source output MDSRC, PPS-remappable MSSP1 slave select SS1, interrupt-on-change IOCA5, and a pull-up option."       },       {         "number": "8",@@ -101,61 +101,61 @@         "number": "9",         "name": "RA7",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA7, interrupt-on-change IOCA7, and weak pull-up; it is also OSC1/CLKIN, available only in select oscillator modes."+        "description": "PORTA bit 7 with analog input ANA7, OSC1/CLKIN oscillator input in select oscillator modes, interrupt-on-change IOCA7, and a pull-up option."       },       {         "number": "10",         "name": "RA6",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANA6, interrupt-on-change IOCA6, and weak pull-up; it is also OSC2/CLKOUT, available only in select oscillator modes."+        "description": "PORTA bit 6 with analog input ANA6, OSC2/CLKOUT oscillator output or clock output in select oscillator modes, interrupt-on-change IOCA6, and a pull-up option."       },       {         "number": "11",         "name": "RC0",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC0, Timer1 clock T1CKI, Timer3 clock T3CKI and gate T3G (PPS), interrupt-on-change IOCC0, weak pull-up, and secondary oscillator output SOSCO."+        "description": "PORTC bit 0 with analog input ANC0, PPS-remappable Timer1/Timer3 clock inputs T1CKI and T3CKI, Timer3 gate input T3G, secondary oscillator output SOSCO, interrupt-on-change IOCC0, and a pull-up option."       },       {         "number": "12",         "name": "RC1",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC1, CCP2 output (PPS), interrupt-on-change IOCC1, weak pull-up, and secondary oscillator pins SOSCIN/SOSCI."+        "description": "PORTC bit 1 with analog input ANC1, PPS-selectable CCP2 output, secondary oscillator input SOSCIN/SOSCI, interrupt-on-change IOCC1, and a pull-up option."       },       {         "number": "13",         "name": "RC2",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC2, Timer5 clock T5CKI (PPS), CCP1 output (PPS), interrupt-on-change IOCC2, and weak pull-up."+        "description": "PORTC bit 2 with analog input ANC2, PPS-remappable Timer5 clock input T5CKI, PPS-selectable CCP1 output, interrupt-on-change IOCC2, and a pull-up option."       },       {         "number": "14",         "name": "RC3",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC3, Timer2 input T2IN (PPS), interrupt-on-change IOCC3, weak pull-up, and MSSP1 SCK/SCL (bidirectional, I2C logic levels)."+        "description": "PORTC bit 3 with analog input ANC3, PPS-remappable Timer2 input T2IN, MSSP1 clock SCK1/SCL1 (bidirectional, I2C logic levels), interrupt-on-change IOCC3, and a pull-up option."       },       {         "number": "15",         "name": "RC4",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC4, interrupt-on-change IOCC4, weak pull-up, and MSSP1 SDI/SDA (bidirectional, I2C logic levels)."+        "description": "PORTC bit 4 with analog input ANC4, MSSP1 data SDI1/SDA1 (bidirectional, I2C logic levels), interrupt-on-change IOCC4, and a pull-up option."       },       {         "number": "16",         "name": "RC5",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC5, Timer4 input T4IN (PPS), interrupt-on-change IOCC5, and weak pull-up."+        "description": "PORTC bit 5 with analog input ANC5, PPS-remappable Timer4 input T4IN, interrupt-on-change IOCC5, and a pull-up option."       },       {         "number": "17",         "name": "RC6",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC6, interrupt-on-change IOCC6, weak pull-up, and EUSART1 clock CK1 (bidirectional, PPS)."+        "description": "PORTC bit 6 with analog input ANC6, EUSART1 clock CK1 (bidirectional), interrupt-on-change IOCC6, and a pull-up option."       },       {         "number": "18",         "name": "RC7",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANC7, interrupt-on-change IOCC7, weak pull-up, and EUSART1 receive/data RX1/DT1 (bidirectional, PPS)."+        "description": "PORTC bit 7 with analog input ANC7, EUSART1 receive/data RX1/DT1 (bidirectional), interrupt-on-change IOCC7, and a pull-up option."       },       {         "number": "19",@@ -173,49 +173,49 @@         "number": "21",         "name": "RB0",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB0, comparator input C2IN1+, CWG1 input (PPS), ZCD input ZCDIN, interrupt-on-change IOCB0, external interrupt INT0 (PPS), MSSP2 client select SS2 (PPS), and weak pull-up."+        "description": "PORTB bit 0 with analog input ANB0, comparator input C2IN1+, PPS-remappable CWG1 input, ZCD input ZCDIN, external interrupt INT0, MSSP2 slave select SS2, interrupt-on-change IOCB0, and a pull-up option."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB1, comparator inputs C1IN3- and C2IN3-, interrupt-on-change IOCB1, external interrupt INT1 (PPS), MSSP2 SCK/SCL (I2C logic levels), and weak pull-up."+        "description": "PORTB bit 1 with analog input ANB1, comparator inputs C1IN3- and C2IN3-, external interrupt INT1, MSSP2 clock SCK2/SCL2 (bidirectional, I2C logic levels), interrupt-on-change IOCB1, and a pull-up option."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB2, interrupt-on-change IOCB2, external interrupt INT2 (PPS), MSSP2 SDI/SDA (I2C logic levels), and weak pull-up."+        "description": "PORTB bit 2 with analog input ANB2, external interrupt INT2, MSSP2 data SDI2/SDA2 (bidirectional, I2C logic levels), interrupt-on-change IOCB2, and a pull-up option."       },       {         "number": "24",         "name": "RB3",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB3, comparator inputs C1IN2- and C2IN2-, interrupt-on-change IOCB3, and weak pull-up."+        "description": "PORTB bit 3 with analog input ANB3, comparator inputs C1IN2- and C2IN2-, interrupt-on-change IOCB3, and a pull-up option."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB4, Timer5 gate T5G (PPS), interrupt-on-change IOCB4, and weak pull-up."+        "description": "PORTB bit 4 with analog input ANB4, PPS-remappable Timer5 gate input T5G, interrupt-on-change IOCB4, and a pull-up option."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB5, Timer1 gate T1G (PPS), interrupt-on-change IOCB5, and weak pull-up."+        "description": "PORTB bit 5 with analog input ANB5, PPS-remappable Timer1 gate input T1G, interrupt-on-change IOCB5, and a pull-up option."       },       {         "number": "27",         "name": "RB6",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB6, interrupt-on-change IOCB6, weak pull-up, EUSART2 clock CK2 (bidirectional, PPS), and ICSPCLK for in-circuit serial programming."+        "description": "PORTB bit 6 with analog input ANB6, EUSART2 clock CK2 (bidirectional), interrupt-on-change IOCB6, and a pull-up option; it is also the ICSPCLK programming clock pin."       },       {         "number": "28",         "name": "RB7",         "type": "bidirectional",-        "description": "General-purpose I/O with analog input ANB7, DAC1OUT2, Timer6 input T6IN (PPS), interrupt-on-change IOCB7, weak pull-up, EUSART2 receive/data RX2/DT2 (bidirectional, PPS), and ICSPDAT for in-circuit serial programming."+        "description": "PORTB bit 7 with analog input ANB7, DAC1OUT2 output, PPS-remappable Timer6 input T6IN, EUSART2 receive/data RX2/DT2 (bidirectional), interrupt-on-change IOCB7, and a pull-up option; it is also the ICSPDAT programming data pin."       }     ],     "provenance": {@@ -229,11 +229,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin numbers are the SSOP/SOIC/SPDIP column of Table 3 (28-Pin Allocation Table) on pages 5-6. The (V; Pin 1 is RE3, which is input-only and doubles as MCLR/VPP. It is typed 'input' because the datasheet; Some functions are PPS-remappable (Table 3 notes 1 and 2), so the listed pin is only the default loc"+          "extractor flagged: Pin numbers are taken from the 28-Pin SPDIP/SOIC/SSOP column of Table 3 (pages 5-6), which the datas; RE3 (pin 1) is input-only and is available only when MCLR is disabled (Figure 2-1 note and CONFIG2 M"         ],-        "pages_sent": 69,-        "cost_usd": 0.2706,-        "at": "2026-11-12T04:57:51"+        "pages_sent": 70,+        "cost_usd": 0.2777,+        "at": "2026-11-17T19:00:49"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18F26-45-46-Q10-Data-Sheet-DS40001996.pdf",@@ -270,7 +270,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",-        "checked": "2026-11-12",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -288,8 +288,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "6051f6201fc2433cf4f7c307aacba7b381f0c569b7ed5262cb46495f16fed920",-        "checked": "2026-11-12",+        "sha256": "18fa30d9548f7231bc7112b188e9ff0e2cbcc48620080225931b3480ec93b734",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -1121,10 +1121,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic18f26q10t-i-ss-hero.glb",-    "pic18f26q10t-i-ss-hero.overlay.json",-    "pic18f26q10t-i-ss-etched.glb"+    "pic18f26q10t-i-ss-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic18f26q10t-i-ss-hero.glb
⋯ 1 unchanged line ⋯
pic18f26q10t-i-ss-hero.overlay.json+3−3
@@ -74,13 +74,13 @@     "footprint": "pic18f26q10t-i-ss.kicad_mod",     "footprint_sha256": "bbb0d0449b996c0ad096ca837fee38110e319360b863de5c7df6a964f6140d98",     "pins": "page.json component.pins",-    "pins_sha256": "c588ba7f385fb5afc2f56f5b2a5c3bf9ba1753757591d181cd3c828251e17998"+    "pins_sha256": "d583ae457bf420b6adaaa531f2eafbf53437521d9c641fb6e4f53c59f48a0181"   },-  "generator": "adom-wiki 1.8.22 (component_hero)",+  "generator": "adom-wiki 1.8.26 (component_hero)",   "labels": [     {       "pad": "1",-      "text": "RE3/MCLR/VPP",+      "text": "RE3",       "x": -4.55,       "y": -4.225,       "align": "right",
pic18f26q10t-i-ss.kicad_sym+1−1
@@ -9,7 +9,7 @@     )     (symbol "PIC18F26Q10T-I_1_1"     (pin input line (at -17.78 15.24 0) (length 5.08)-      (name "RE3/MCLR/VPP" (effects (font (size 1.27 1.27))))+      (name "RE3" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at -17.78 12.70 0) (length 5.08)
pic18f26q10t-i-ss.lbr+16−5
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SSOP-28_5.3x10.2mm_P0.65mm">   <description>SSOP-28, 5.3 x 10.2 mm, 0.65 mm pitch</description>@@ -106,13 +106,14 @@ </packages> <symbols> <symbol name="PIC18F26Q10T-I">+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="17.78" x2="12.7" y2="17.78" width="0.254" layer="94"/>   <wire x1="12.7" y1="17.78" x2="12.7" y2="-20.32" width="0.254" layer="94"/>   <wire x1="12.7" y1="-20.32" x2="-12.7" y2="-20.32" width="0.254" layer="94"/>   <wire x1="-12.7" y1="-20.32" x2="-12.7" y2="17.78" width="0.254" layer="94"/>   <text x="0.0000" y="20.3200" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-22.8600" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="RE3/MCLR/VPP" x="-17.78" y="15.24" length="middle" direction="in"/>+  <pin name="RE3" x="-17.78" y="15.24" length="middle" direction="in"/>   <pin name="RA0" x="-17.78" y="12.7" length="middle" direction="io"/>   <pin name="RA1" x="-17.78" y="10.16" length="middle" direction="io"/>   <pin name="RA2" x="-17.78" y="7.62" length="middle" direction="io"/>@@ -144,14 +145,14 @@ </symbols> <devicesets> <deviceset name="PIC18F26Q10T-I" prefix="U">-  <description></description>+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="PIC18F26Q10T-I" x="0" y="0"/>   </gates>   <devices>     <device name="" package="SSOP-28_5.3x10.2mm_P0.65mm">       <connects>-        <connect gate="G$1" pin="RE3/MCLR/VPP" pad="1"/>+        <connect gate="G$1" pin="RE3" pad="1"/>         <connect gate="G$1" pin="RA0" pad="2"/>         <connect gate="G$1" pin="RA1" pad="3"/>         <connect gate="G$1" pin="RA2" pad="4"/>@@ -180,7 +181,17 @@         <connect gate="G$1" pin="RC5" pad="16"/>         <connect gate="G$1" pin="RC4" pad="15"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="PIC18F26Q10T-I/SS" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+          <attribute name="DATASHEET" value="https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/PIC18F26-45-46-Q10-Data-Sheet-DS40001996.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic18f26q10t-i-ss" constant="no"/>+          <attribute name="MOUSER_PN" value="579-PIC18F26Q10TISS" constant="no"/>+          <attribute name="DIGIKEY_PN" value="PIC18F26Q10T-I/SSTR-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C628996" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>