← Commit history

pic18f26k83-i: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·47971c050a · ·parent 7314d45
1 file changed +194−1
page.json+194−1
@@ -33,5 +33,198 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "PIC18F26K83-I",+    "manufacturer": "Microchip",+    "package": "SSOP-28-208mil",+    "pin_count": 28,+    "category": "Microcontrollers (MCU/MPU/SOC)",+    "parts": {+      "symbol": "pic18f26k83-i.kicad_sym",+      "footprint": "pic18f26k83-i.kicad_mod",+      "model_3d": "pic18f26k83-i-etched.glb",+      "model_3d_plain": "pic18f26k83-i.glb",+      "model_3d_step": "pic18f26k83-i-etched.step",+      "model_3d_step_plain": "pic18f26k83-i.step",+      "lbr": "pic18f26k83-i.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "MCLR/VPP/RE3",+        "type": "input",+        "description": "Active-low master clear (device reset) input with internal weak pull-up; also high-voltage programming supply (VPP) during ICSP. May be repurposed as digital input-only RE3 when MCLR is disabled in configuration."+      },+      {+        "number": "2",+        "name": "RA0",+        "type": "bidirectional",+        "description": "PORTA bit 0 general-purpose I/O with IOC. Analog channel ANA0 and comparator C1IN0-/C2IN0- inverting inputs. 5 V-tolerant per device family (F: 5.5 V max VDD)."+      },+      {+        "number": "3",+        "name": "RA1",+        "type": "bidirectional",+        "description": "PORTA bit 1 GPIO with IOC. Analog channel ANA1 and comparator C1IN1-/C2IN1- inverting inputs."+      },+      {+        "number": "4",+        "name": "RA2",+        "type": "bidirectional",+        "description": "PORTA bit 2 GPIO with IOC. Analog channel ANA2, external voltage-reference negative input (VREF-), DAC1OUT1 output, and comparator C1IN0+/C2IN0+ non-inverting inputs."+      },+      {+        "number": "5",+        "name": "RA3",+        "type": "bidirectional",+        "description": "PORTA bit 3 GPIO with IOC. Analog channel ANA3, external voltage-reference positive input (VREF+), comparator C1IN1+ non-inverting input, and DSM MD1CARL PPS input."+      },+      {+        "number": "6",+        "name": "RA4",+        "type": "bidirectional",+        "description": "PORTA bit 4 GPIO with IOC. Analog channel ANA4, Timer0 clock input T0CKI (PPS) and DSM MD1CARH PPS input."+      },+      {+        "number": "7",+        "name": "RA5",+        "type": "bidirectional",+        "description": "PORTA bit 5 GPIO with IOC. Analog channel ANA5, SPI slave-select SS1 (PPS) and DSM MD1SRC PPS input."+      },+      {+        "number": "8",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference for logic and I/O. Connect to system 0 V. This is one of two VSS pins on the 28-pin SPDIP/SOIC/SSOP package (pins 8 and 19)."+      },+      {+        "number": "9",+        "name": "RA7/OSC1/CLKIN",+        "type": "bidirectional",+        "description": "PORTA bit 7 GPIO with IOC. Also primary oscillator input (OSC1) or external clock input (CLKIN), and analog channel ANA7."+      },+      {+        "number": "10",+        "name": "RA6/OSC2/CLKOUT",+        "type": "bidirectional",+        "description": "PORTA bit 6 GPIO with IOC. Also primary oscillator output (OSC2) or FOSC/4 clock output (CLKOUT), and analog channel ANA6."+      },+      {+        "number": "11",+        "name": "RC0/SOSCO",+        "type": "bidirectional",+        "description": "PORTC bit 0 GPIO with IOC. Secondary oscillator output SOSCO, analog channel ANC0, Timer1/3 clock/gate inputs T1CKI/T3CKI/T3G (PPS) and SMT1WIN PPS input."+      },+      {+        "number": "12",+        "name": "RC1/SOSCI",+        "type": "bidirectional",+        "description": "PORTC bit 1 GPIO with IOC. Secondary oscillator input SOSCI, analog channel ANC1, SMT1SIG and CCP2 PPS inputs."+      },+      {+        "number": "13",+        "name": "RC2",+        "type": "bidirectional",+        "description": "PORTC bit 2 GPIO with IOC. Analog channel ANC2, Timer5 clock T5CKI (PPS) and CCP1 (PPS) inputs."+      },+      {+        "number": "14",+        "name": "RC3",+        "type": "bidirectional",+        "description": "PORTC bit 3 GPIO with IOC. Analog channel ANC3, default I2C1 SCL and SPI1 SCK (both PPS, bidirectional), Timer2 input T2IN (PPS)."+      },+      {+        "number": "15",+        "name": "RC4",+        "type": "bidirectional",+        "description": "PORTC bit 4 GPIO with IOC. Analog channel ANC4, default I2C1 SDA (PPS, bidirectional, I2C/SMBus tolerant) and SPI1 SDI (PPS) inputs."+      },+      {+        "number": "16",+        "name": "RC5",+        "type": "bidirectional",+        "description": "PORTC bit 5 GPIO with IOC. Analog channel ANC5 and Timer4 input T4IN (PPS)."+      },+      {+        "number": "17",+        "name": "RC6",+        "type": "bidirectional",+        "description": "PORTC bit 6 GPIO with IOC. Analog channel ANC6 and UART1 CTS1 PPS input."+      },+      {+        "number": "18",+        "name": "RC7",+        "type": "bidirectional",+        "description": "PORTC bit 7 GPIO with IOC. Analog channel ANC7 and UART1 RX1 PPS input."+      },+      {+        "number": "19",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference for logic and I/O. Connect to system 0 V. Second VSS pin on the 28-pin SPDIP/SOIC/SSOP package."+      },+      {+        "number": "20",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive supply. 2.3-5.5 V for PIC18F26K83 (F variant), 1.8-3.6 V for PIC18LF26K83 (LF variant). Decouple with 100 nF close to the pin."+      },+      {+        "number": "21",+        "name": "RB0",+        "type": "bidirectional",+        "description": "PORTB bit 0 GPIO with IOC and external interrupt INT0 (PPS). Analog channel ANB0, comparator C2IN1+ non-inverting input, Zero-Cross Detect (ZCD) input, CCP4 PPS input and CWG1 fault input."+      },+      {+        "number": "22",+        "name": "RB1",+        "type": "bidirectional",+        "description": "PORTB bit 1 GPIO with IOC and external interrupt INT1 (PPS). Analog channel ANB1, comparator C1IN3-/C2IN3-, default I2C2 SCL (PPS, bidirectional, I2C/SMBus tolerant) and CWG2 PPS input."+      },+      {+        "number": "23",+        "name": "RB2",+        "type": "bidirectional",+        "description": "PORTB bit 2 GPIO with IOC and external interrupt INT2 (PPS). Analog channel ANB2, default I2C2 SDA (PPS, bidirectional, I2C/SMBus tolerant) and CWG3 PPS input."+      },+      {+        "number": "24",+        "name": "RB3",+        "type": "bidirectional",+        "description": "PORTB bit 3 GPIO with IOC. Analog channel ANB3, comparator C1IN2-/C2IN2- inverting inputs and CAN receive input CANRX (PPS)."+      },+      {+        "number": "25",+        "name": "RB4",+        "type": "bidirectional",+        "description": "PORTB bit 4 GPIO with IOC. Analog channel ANB4, ADC external trigger ADACT (PPS), Timer5 gate T5G, SMT2WIN and CLCIN2 PPS inputs."+      },+      {+        "number": "26",+        "name": "RB5",+        "type": "bidirectional",+        "description": "PORTB bit 5 GPIO with IOC. Analog channel ANB5, Timer1 gate T1G, SMT2SIG, CCP3 and CLCIN3 PPS inputs."+      },+      {+        "number": "27",+        "name": "RB6/ICSPCLK",+        "type": "bidirectional",+        "description": "PORTB bit 6 GPIO with IOC. Also In-Circuit Serial Programming clock (ICSPCLK) and In-Circuit Debug clock. Analog channel ANB6 and UART2 CTS2 PPS input."+      },+      {+        "number": "28",+        "name": "RB7/ICSPDAT",+        "type": "bidirectional",+        "description": "PORTB bit 7 GPIO with IOC. Also In-Circuit Serial Programming data (ICSPDAT) and In-Circuit Debug data. Analog channel ANB7, DAC1OUT2, Timer6 input T6IN and UART2 RX2 PPS input."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}