← Commit history

Publish 0.1.2

Ray ·8b53d1208d · ·parent 8a06598
4 files changed +136−136
README.md+64−66
@@ -9,33 +9,33 @@ PIC16F876-20I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descripti | Pin | Name | Type | Function | |---|---|---|---| | 1 | MCLR/VPP | input | Master Clear (Reset) input or programming voltage input; this pin is an active low RESET to the device. |-| 2 | RA0/AN0 | bidirectional | PORTA bidirectional I/O pin RA0, which can also be analog input 0 (TTL input buffer). |-| 3 | RA1/AN1 | bidirectional | PORTA bidirectional I/O pin RA1, which can also be analog input 1 (TTL input buffer). |-| 4 | RA2/AN2/VREF- | bidirectional | PORTA bidirectional I/O pin RA2, which can also be analog input 2 or negative analog reference voltage (TTL input buffer). |-| 5 | RA3/AN3/VREF+ | bidirectional | PORTA bidirectional I/O pin RA3, which can also be analog input 3 or positive analog reference voltage (TTL input buffer). |-| 6 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O pin RA4, which can also be the clock input to Timer0; output is open drain type (Schmitt Trigger input). |-| 7 | RA5/SS/AN4 | bidirectional | PORTA bidirectional I/O pin RA5, which can also be analog input 4 or the slave select for the synchronous serial port (TTL input buffer). |+| 2 | RA0/AN0 | bidirectional | PORTA bi-directional I/O with TTL input buffer; RA0 can also be analog input 0. |+| 3 | RA1/AN1 | bidirectional | PORTA bi-directional I/O with TTL input buffer; RA1 can also be analog input 1. |+| 4 | RA2/AN2/VREF- | bidirectional | PORTA bi-directional I/O with TTL input buffer; RA2 can also be analog input 2 or the negative analog reference voltage. |+| 5 | RA3/AN3/VREF+ | bidirectional | PORTA bi-directional I/O with TTL input buffer; RA3 can also be analog input 3 or the positive analog reference voltage. |+| 6 | RA4/T0CKI | bidirectional | PORTA I/O with Schmitt Trigger input; RA4 can also be the Timer0 clock input, and its output is open drain type. |+| 7 | RA5/SS/AN4 | bidirectional | PORTA I/O with TTL input buffer; RA5 can also be analog input 4 or the slave select for the synchronous serial port. | | 8 | VSS | power_in | Ground reference for logic and I/O pins. |-| 9 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input (Schmitt Trigger input in RC mode, CMOS input otherwise). |-| 10 | OSC2/CLKOUT | output | Oscillator crystal output connecting to crystal or resonator in crystal oscillator mode; in RC mode outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |-| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bidirectional I/O pin RC0, which can also be the Timer1 oscillator output or Timer1 clock input (Schmitt Trigger input). |-| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC bidirectional I/O pin RC1, which can also be the Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output (Schmitt Trigger input). |-| 13 | RC2/CCP1 | bidirectional | PORTC bidirectional I/O pin RC2, which can also be the Capture1 input/Compare1 output/PWM1 output (Schmitt Trigger input). |-| 14 | RC3/SCK/SCL | bidirectional | PORTC bidirectional I/O pin RC3, which can also be the synchronous serial clock input/output for both SPI and I2C modes (Schmitt Trigger input). |-| 15 | RC4/SDI/SDA | bidirectional | PORTC bidirectional I/O pin RC4, which can also be the SPI Data In (SPI mode) or data I/O (I2C mode) (Schmitt Trigger input). |-| 16 | RC5/SDO | bidirectional | PORTC bidirectional I/O pin RC5, which can also be the SPI Data Out (SPI mode) (Schmitt Trigger input). |-| 17 | RC6/TX/CK | bidirectional | PORTC bidirectional I/O pin RC6, which can also be the USART Asynchronous Transmit or Synchronous Clock (Schmitt Trigger input). |-| 18 | RC7/RX/DT | bidirectional | PORTC bidirectional I/O pin RC7, which can also be the USART Asynchronous Receive or Synchronous Data (Schmitt Trigger input). |+| 9 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input, with a Schmitt Trigger buffer in RC oscillator mode and a CMOS input otherwise. |+| 10 | OSC2/CLKOUT | output | Oscillator crystal output connecting to a crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1. |+| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bi-directional I/O with Schmitt Trigger input; RC0 can also be the Timer1 oscillator output or Timer1 clock input. |+| 12 | RC1/T1OSI/CCP2 | bidirectional | PORTC bi-directional I/O with Schmitt Trigger input; RC1 can also be the Timer1 oscillator input or Capture2 input, Compare2 output, or PWM2 output. |+| 13 | RC2/CCP1 | bidirectional | PORTC bi-directional I/O with Schmitt Trigger input; RC2 can also be the Capture1 input, Compare1 output, or PWM1 output. |+| 14 | RC3/SCK/SCL | bidirectional | PORTC bi-directional I/O with Schmitt Trigger input; RC3 can also be the synchronous serial clock input/output for both SPI and I2C modes. |+| 15 | RC4/SDI/SDA | bidirectional | PORTC bi-directional I/O with Schmitt Trigger input; RC4 can also be the SPI Data In (SPI mode) or data I/O (I2C mode). |+| 16 | RC5/SDO | bidirectional | PORTC bi-directional I/O with Schmitt Trigger input; RC5 can also be the SPI Data Out (SPI mode). |+| 17 | RC6/TX/CK | bidirectional | PORTC bi-directional I/O with Schmitt Trigger input; RC6 can also be the USART asynchronous transmit or synchronous clock. |+| 18 | RC7/RX/DT | bidirectional | PORTC bi-directional I/O with Schmitt Trigger input; RC7 can also be the USART asynchronous receive or synchronous data. | | 19 | VSS | power_in | Ground reference for logic and I/O pins. |-| 20 | VDD | power_in | Positive supply for logic and I/O pins. |-| 21 | RB0/INT | bidirectional | PORTB bidirectional I/O pin RB0, which can also be the external interrupt pin (TTL/Schmitt Trigger input when configured as interrupt); PORTB supports software-programmed weak pull-ups. |-| 22 | RB1 | bidirectional | PORTB bidirectional I/O pin RB1 (TTL input buffer); PORTB supports software-programmed weak pull-ups. |-| 23 | RB2 | bidirectional | PORTB bidirectional I/O pin RB2 (TTL input buffer); PORTB supports software-programmed weak pull-ups. |-| 24 | RB3/PGM | bidirectional | PORTB bidirectional I/O pin RB3, which can also be the low voltage programming input (TTL input buffer). |-| 25 | RB4 | bidirectional | PORTB bidirectional I/O pin RB4 with interrupt-on-change (TTL input buffer). |-| 26 | RB5 | bidirectional | PORTB bidirectional I/O pin RB5 with interrupt-on-change (TTL input buffer). |-| 27 | RB6/PGC | bidirectional | PORTB bidirectional I/O pin RB6, which can also be the interrupt-on-change pin or In-Circuit Debugger pin and serial programming clock (TTL/Schmitt Trigger input in serial programming mode). |-| 28 | RB7/PGD | bidirectional | PORTB bidirectional I/O pin RB7, which can also be the interrupt-on-change pin or In-Circuit Debugger pin and serial programming data (TTL/Schmitt Trigger input in serial programming mode). |+| 20 | VDD | power_in | Positive supply for logic and I/O pins; the features list gives the device operating voltage range as 2.0V to 5.5V. |+| 21 | RB0/INT | bidirectional | PORTB bi-directional I/O with TTL input buffer (Schmitt Trigger when used as external interrupt); RB0 can also be the external interrupt pin, and PORTB pins can be software-programmed for internal weak pull-up. |+| 22 | RB1 | bidirectional | PORTB bi-directional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-up. |+| 23 | RB2 | bidirectional | PORTB bi-directional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-up. |+| 24 | RB3/PGM | bidirectional | PORTB bi-directional I/O with TTL input buffer; RB3 can also be the low voltage programming input. |+| 25 | RB4 | bidirectional | PORTB bi-directional I/O with TTL input buffer; RB4 is an interrupt-on-change pin. |+| 26 | RB5 | bidirectional | PORTB bi-directional I/O with TTL input buffer; RB5 is an interrupt-on-change pin. |+| 27 | RB6/PGC | bidirectional | PORTB bi-directional I/O with Schmitt Trigger input in serial programming mode; RB6 can also be an interrupt-on-change pin, an In-Circuit Debugger pin, or the serial programming clock. |+| 28 | RB7/PGD | bidirectional | PORTB bi-directional I/O with Schmitt Trigger input in serial programming mode; RB7 can also be an interrupt-on-change pin, an In-Circuit Debugger pin, or the serial programming data. |  ## Key specifications @@ -52,58 +52,56 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) |  | -0.3 |  |  | V | except VDD, MCLR, RA4; upper limit printed as (VDD + 0.3 V), see review_required | 149 |-| Voltage on VDD with respect to VSS | VDD | -0.3 |  | 7.5 | V |  | 149 |-| Voltage on MCLR with respect to VSS |  | 0 |  | 14 | V | (Note 2) | 149 |-| Voltage on RA4 with respect to VSS |  | 0 |  | 8.5 | V |  | 149 |+| Supply voltage (LP, XT, RC oscillator) | VDD | 4 |  | 5.5 | V | LP, XT, RC osc configuration | 152 |+| Supply voltage (HS oscillator) | VDD | 4.5 |  | 5.5 | V | HS osc configuration | 152 |+| Operating temperature (industrial) | TA | -40 |  | 85 | °C | for industrial | 152 | | Ambient temperature under bias |  | -55 |  | 125 | °C |  | 149 | | Storage temperature |  | -65 |  | 150 | °C |  | 149 |-| Total power dissipation |  |  |  | 1 | W | (Note 1) | 149 |+| Voltage on VDD with respect to VSS | VDD | -0.3 |  | 7.5 | V |  | 149 |+| Voltage on MCLR with respect to VSS | MCLR | 0 |  | 14 | V |  | 149 |+| Voltage on RA4 with respect to VSS | RA4 | 0 |  | 8.5 | V |  | 149 |+| Total power dissipation |  |  |  | 1 | W |  | 149 | | Input clamp current | IIK |  |  | 20 | mA | VI < 0 or VI > VDD | 149 | | Output clamp current | IOK |  |  | 20 | mA | VO < 0 or VO > VDD | 149 |-| Operating temperature range (industrial) | TA | -40 |  | 85 | °C | Standard Operating Conditions, industrial range | 152 |-| Supply voltage | VDD | 4 |  | 5.5 | V | LP, XT, RC osc configuration | 152 |-| Supply voltage (HS oscillator) | VDD | 4.5 |  | 5.5 | V | HS osc configuration | 152 |-| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 |  |  | V/ms | See section on Power-on Reset for details | 152 |-| Brown-out Reset voltage | VBOR | 3.7 | 4 | 4.35 | V | BODEN bit in configuration word enabled | 152 |-| Supply current (RC oscillator) | IDD |  | 1.6 | 4 | mA | RC osc configurations, FOSC = 4 MHz, VDD = 5.5V | 153 |-| Supply current (HS oscillator) | IDD |  | 7 | 15 | mA | HS osc configuration, FOSC = 20 MHz, VDD = 5.5V | 153 |-| Brown-out Reset current | IBOR |  | 85 | 200 | µA | BOR enabled, VDD = 5.0V | 153 |-| Power-down current | IPD |  | 10.5 | 42 | µA | VDD = 4.0V, WDT enabled, -40C to +85C | 154 |-| Power-down current | IPD |  | 1.5 | 16 | µA | VDD = 4.0V, WDT enabled, -40C to +85C | 154 |-| Power-down current (D021A) | IPD |  | 1.5 | 19 | µA | VDD = 4.0V, WDT enabled, -40C to +85C | 154 |-| Brown-out Reset current (IPD table) | IBOR |  | 85 | 200 | µA | BOR enabled, VDD = 5.0V | 154 |-| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS, -40°C TO +85°C | 155 |-| Input low voltage, I/O ports with TTL buffer (SMBus, RC3/RC4) | VIL | -0.5 |  | 0.6 | V | for VDD = 4.5 to 5.5V | 155 |-| Input low voltage, I/O ports with TTL buffer | VIL |  |  | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 155 |-| Input high voltage, I/O ports with TTL buffer | VIH | 2 |  |  | V | 4.5V ≤ VDD ≤ 5.5V | 155 |+| Supply voltage: VDD Brown-out Reset voltage | VBOR | 3.7 | 4 | 4.35 | V | BODEN bit in configuration word enabled | 152 |+| Supply current (RC oscillator configurations) | IDD |  | 1.6 | 4 | mA | RC osc configurations, FOSC = 4 MHz, VDD = 5.5V | 153 |+| Supply current (HS oscillator configuration) | IDD |  | 7 | 15 | mA | HS osc configuration, FOSC = 20 MHz, VDD = 5.5V | 153 |+| Brown-out Reset current | IBOR |  | 85 | 200 | uA | BOR enabled, VDD = 5.0V | 153 |+| Power-down current (WDT enabled) | IPD |  | 10.5 | 42 | uA | VDD = 4.0V, WDT enabled, -40C to +85C | 154 |+| Power-down current (WDT enabled) | IPD |  | 1.5 | 16 | uA | VDD = 4.0V, WDT enabled, -40C to +85C | 154 |+| Power-down current (WDT enabled, alternate row D021A) | IPD | 1.5 |  | 19 | uA | VDD = 4.0V, WDT enabled, -40C to +85C | 154 |+| Brown-out Reset current | IBOR |  | 85 | 200 | uA | BOR enabled, VDD = 5.0V | 154 |+| Input low voltage, I/O ports with TTL buffer | VIL |  |  | 0.8 | V | 4.5V <= VDD <= 5.5V | 155 |+| Input low voltage, Ports RC3 and RC4 with SMBus | VIL | -0.5 |  | 0.6 | V | for VDD = 4.5 to 5.5V | 155 |+| Input high voltage, I/O ports with TTL buffer | VIH | 2 |  |  | V | 4.5V <= VDD <= 5.5V | 155 | | Input high voltage, Ports RC3 and RC4 with SMBus | VIH | 1.4 |  | 5.5 | V | for VDD = 4.5 to 5.5V | 155 |-| I/O ports input leakage current | IIL |  |  | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance | 155 |-| MCLR, RA4/T0CKI input leakage current | IIL |  |  | 5 | µA | Vss ≤ VPIN ≤ VDD | 155 |-| OSC1 input leakage current | IIL |  |  | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 155 |-| I/O ports output low voltage | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 156 |-| OSC2/CLKOUT output low voltage (RC osc config) | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40C to +85C | 156 |+| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | uA | VDD = 5V, VPIN = VSS, -40°C to +85°C | 155 |+| Input leakage current, I/O ports | IIL |  |  | 1 | uA | Vss <= VPIN <= VDD, Pin at hi-impedance | 155 |+| Input leakage current, MCLR, RA4/T0CKI | IIL |  |  | 5 | uA | Vss <= VPIN <= VDD | 155 |+| Input leakage current, OSC1 | IIL |  |  | 5 | uA | Vss <= VPIN <= VDD, XT, HS and LP osc configuration | 155 |+| Output low voltage, I/O ports | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 156 |+| Output low voltage, OSC2/CLKOUT (RC osc config) | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40C to +85C | 156 | | Open-drain high voltage, RA4 pin | VOD |  |  | 8.5 | V | RA4 pin | 156 | | OSC2 pin capacitive loading | COSC2 |  |  | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 156 |-| All I/O pins and OSC2 (RC mode) capacitive loading | CIO |  |  | 50 | pF |  | 156 |-| SCL, SDA (I2C mode) capacitive loading | CB |  |  | 400 | pF | I2C mode | 156 |-| VDD for read/write (data EEPROM) | VDRW |  |  | 5.5 | V | Using EECON to read/write, VMIN = min. operating voltage | 156 |+| I/O pin capacitive loading | CIO |  |  | 50 | pF | All I/O pins and OSC2 (RC mode) | 156 |+| SCL, SDA capacitive loading (I2C mode) | CB |  |  | 400 | pF | SCL, SDA (I2C mode) | 156 |+| VDD for data EEPROM read/write | VDRW |  |  | 5.5 | V | Using EECON to read/write, VMIN = min. operating voltage | 156 | | Data EEPROM erase/write cycle time | TDEW |  | 4 | 8 | ms |  | 156 | | Program FLASH endurance | EP | 1000 |  |  | E/W | 25C at 5V | 156 |-| VDD for read (program FLASH) | VPR |  |  | 5.5 | V | VMIN = min operating voltage | 156 |-| VDD for erase/write (program FLASH) | VDD |  |  | 5.5 | V | Using EECON to read/write, VMIN = min. operating voltage | 156 |+| VDD for program FLASH read | VPR |  |  | 5.5 | V | VMIN = min operating voltage | 156 |+| VDD for program FLASH erase/write | VDD |  |  | 5.5 | V | Using EECON to read/write, VMIN = min. operating voltage | 156 | | Program FLASH erase/write cycle time | TPEW |  | 4 | 8 | ms |  | 156 |-| External CLKIN frequency (HS osc, -20) | FOSC |  |  | 20 | MHz | HS osc mode (-20) | 162 |-| Oscillator frequency (HS osc, -20) | FOSC | 4 |  | 20 | MHz | HS osc mode (-20) | 162 |-| External CLKIN period (HS osc, -20) | TOSC | 50 |  |  | ns | HS osc mode (-20) | 162 |-| Oscillator period (HS osc, -20) | TOSC | 50 |  | 250 | ns | HS osc mode (-20) | 162 |+| External CLKIN frequency (HS -20) | FOSC |  |  | 20 | MHz | HS osc mode (-20) | 162 |+| Oscillator frequency (HS -20) | FOSC | 4 |  | 20 | MHz | HS osc mode (-20) | 162 | | Instruction cycle time | TCY | 200 |  |  | ns | TCY = 4/FOSC | 162 |-| CLKOUT rise time | TckR |  | 35 | 100 | ns | (Note 1) | 163 |-| CLKOUT fall time | TckF |  | 35 | 100 | ns | (Note 1) | 163 |+| Oscillator period (HS -20) | TOSC | 50 |  | 250 | ns | HS osc mode (-20) | 162 |+| External clock in (OSC1) high or low time (HS) | TosL,TosH | 15 |  |  | ns | HS oscillator | 162 |+| External clock in (OSC1) rise or fall time (HS) | TosR,TosF |  |  | 15 | ns | HS oscillator | 162 |+| OSC1 to CLKOUT | TosH2ckL |  | 75 | 200 | ns |  | 163 | | OSC1 (Q1 cycle) to port out valid | TosH2ioV |  | 100 | 255 | ns |  | 163 |-| OSC1 (Q2 cycle) to port input invalid (I/O in hold time), Standard (F) | TosH2ioI | 100 |  |  | ns | Standard (F) | 163 |-| Port output rise time, Standard (F) | TioR |  | 10 | 40 | ns | Standard (F) | 163 |-| Port output fall time, Standard (F) | TioF |  | 10 | 40 | ns | Standard (F) | 163 |+| OSC1 (Q2 cycle) to port input invalid (I/O in hold time) | TosH2ioI | 100 |  |  | ns | Standard (F) | 163 |+| Port output rise time | TioR |  | 10 | 40 | ns | Standard (F) | 163 |+| Port output fall time | TioF |  | 10 | 40 | ns | Standard (F) | 163 |  ## CAD (KiCad official) @@ -116,7 +114,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30292D.pdf) (218 pp, sha256 `2b2f4f67afe6ac63`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30292D.pdf) (218 pp, sha256 `2b2f4f67afe6ac63`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+34−34
@@ -1,6 +1,6 @@ {   "slug": "pic16f876-20i-so",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -53,7 +53,7 @@       "mouser": "579-PIC16F876-20I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-13T00:49:05Z",+      "checked_at": "2026-11-17T20:15:55Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16F876-20I/SO-ND",@@ -76,37 +76,37 @@         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA0, which can also be analog input 0 (TTL input buffer)."+        "description": "PORTA bi-directional I/O with TTL input buffer; RA0 can also be analog input 0."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA1, which can also be analog input 1 (TTL input buffer)."+        "description": "PORTA bi-directional I/O with TTL input buffer; RA1 can also be analog input 1."       },       {         "number": "4",         "name": "RA2/AN2/VREF-",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA2, which can also be analog input 2 or negative analog reference voltage (TTL input buffer)."+        "description": "PORTA bi-directional I/O with TTL input buffer; RA2 can also be analog input 2 or the negative analog reference voltage."       },       {         "number": "5",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA3, which can also be analog input 3 or positive analog reference voltage (TTL input buffer)."+        "description": "PORTA bi-directional I/O with TTL input buffer; RA3 can also be analog input 3 or the positive analog reference voltage."       },       {         "number": "6",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA4, which can also be the clock input to Timer0; output is open drain type (Schmitt Trigger input)."+        "description": "PORTA I/O with Schmitt Trigger input; RA4 can also be the Timer0 clock input, and its output is open drain type."       },       {         "number": "7",         "name": "RA5/SS/AN4",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA5, which can also be analog input 4 or the slave select for the synchronous serial port (TTL input buffer)."+        "description": "PORTA I/O with TTL input buffer; RA5 can also be analog input 4 or the slave select for the synchronous serial port."       },       {         "number": "8",@@ -118,61 +118,61 @@         "number": "9",         "name": "OSC1/CLKIN",         "type": "input",-        "description": "Oscillator crystal input or external clock source input (Schmitt Trigger input in RC mode, CMOS input otherwise)."+        "description": "Oscillator crystal input or external clock source input, with a Schmitt Trigger buffer in RC oscillator mode and a CMOS input otherwise."       },       {         "number": "10",         "name": "OSC2/CLKOUT",         "type": "output",-        "description": "Oscillator crystal output connecting to crystal or resonator in crystal oscillator mode; in RC mode outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to a crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1."       },       {         "number": "11",         "name": "RC0/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC0, which can also be the Timer1 oscillator output or Timer1 clock input (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC0 can also be the Timer1 oscillator output or Timer1 clock input."       },       {         "number": "12",         "name": "RC1/T1OSI/CCP2",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC1, which can also be the Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC1 can also be the Timer1 oscillator input or Capture2 input, Compare2 output, or PWM2 output."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC2, which can also be the Capture1 input/Compare1 output/PWM1 output (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC2 can also be the Capture1 input, Compare1 output, or PWM1 output."       },       {         "number": "14",         "name": "RC3/SCK/SCL",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC3, which can also be the synchronous serial clock input/output for both SPI and I2C modes (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC3 can also be the synchronous serial clock input/output for both SPI and I2C modes."       },       {         "number": "15",         "name": "RC4/SDI/SDA",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC4, which can also be the SPI Data In (SPI mode) or data I/O (I2C mode) (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC4 can also be the SPI Data In (SPI mode) or data I/O (I2C mode)."       },       {         "number": "16",         "name": "RC5/SDO",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC5, which can also be the SPI Data Out (SPI mode) (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC5 can also be the SPI Data Out (SPI mode)."       },       {         "number": "17",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC6, which can also be the USART Asynchronous Transmit or Synchronous Clock (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC6 can also be the USART asynchronous transmit or synchronous clock."       },       {         "number": "18",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC7, which can also be the USART Asynchronous Receive or Synchronous Data (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC7 can also be the USART asynchronous receive or synchronous data."       },       {         "number": "19",@@ -184,55 +184,55 @@         "number": "20",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply for logic and I/O pins."+        "description": "Positive supply for logic and I/O pins; the features list gives the device operating voltage range as 2.0V to 5.5V."       },       {         "number": "21",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB0, which can also be the external interrupt pin (TTL/Schmitt Trigger input when configured as interrupt); PORTB supports software-programmed weak pull-ups."+        "description": "PORTB bi-directional I/O with TTL input buffer (Schmitt Trigger when used as external interrupt); RB0 can also be the external interrupt pin, and PORTB pins can be software-programmed for internal weak pull-up."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB1 (TTL input buffer); PORTB supports software-programmed weak pull-ups."+        "description": "PORTB bi-directional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-up."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB2 (TTL input buffer); PORTB supports software-programmed weak pull-ups."+        "description": "PORTB bi-directional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-up."       },       {         "number": "24",         "name": "RB3/PGM",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB3, which can also be the low voltage programming input (TTL input buffer)."+        "description": "PORTB bi-directional I/O with TTL input buffer; RB3 can also be the low voltage programming input."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB4 with interrupt-on-change (TTL input buffer)."+        "description": "PORTB bi-directional I/O with TTL input buffer; RB4 is an interrupt-on-change pin."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB5 with interrupt-on-change (TTL input buffer)."+        "description": "PORTB bi-directional I/O with TTL input buffer; RB5 is an interrupt-on-change pin."       },       {         "number": "27",         "name": "RB6/PGC",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB6, which can also be the interrupt-on-change pin or In-Circuit Debugger pin and serial programming clock (TTL/Schmitt Trigger input in serial programming mode)."+        "description": "PORTB bi-directional I/O with Schmitt Trigger input in serial programming mode; RB6 can also be an interrupt-on-change pin, an In-Circuit Debugger pin, or the serial programming clock."       },       {         "number": "28",         "name": "RB7/PGD",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB7, which can also be the interrupt-on-change pin or In-Circuit Debugger pin and serial programming data (TTL/Schmitt Trigger input in serial programming mode)."+        "description": "PORTB bi-directional I/O with Schmitt Trigger input in serial programming mode; RB7 can also be an interrupt-on-change pin, an In-Circuit Debugger pin, or the serial programming data."       }     ],     "provenance": {@@ -246,11 +246,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The SOIC pin numbers are taken from Table 1-1 (PIC16F873/PIC16F876 pinout), whose SOIC column matche; The datasheet pinout is for the PIC16F876 family (28-pin devices). The text confirms a 28-lead SOIC ; Headline electrical specs in the excerpt (2.0 V to 5.5 V supply, DC to 20 MHz, 25 mA high sink/sourc"+          "extractor flagged: The pin-level electrical limits (absolute maximum ratings, input/output levels, supply current) are ; The SOIC pin numbers come from the PIC16F873/876 table (Table 1-1) on page 7. The 28-lead SOIC mecha; The schema has no field for headline electrical specs. The 2.0V to 5.5V operating range and the 25 m"         ],         "pages_sent": 21,-        "cost_usd": 0.1344,-        "at": "2026-11-13T00:48:48"+        "cost_usd": 0.1346,+        "at": "2026-11-17T20:15:24"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30292D.pdf",@@ -287,7 +287,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-13",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -305,13 +305,13 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "11bd64bd0ce69991bf1425dc1af1987ec375402f29f7a5e7fc404b3bb3488dc5",-        "checked": "2026-11-13",+        "sha256": "a49df1c32e1decf8ac543bf770ffd8b2b1181cffd5cdfedf5990e4a3690afd36",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO (SOIC) 28-Lead Wide 300 mil, MS-013, C04-052",+      "package_code": "SO (SOIC) 28-Lead Wide 300 mil",       "source_page": 192,       "D": {         "nom_mm": 17.87,
page.json+37−35
@@ -4,7 +4,7 @@   "slug": "pic16f876-20i-so",   "title": "PIC16F876-20I/SO",   "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "579-PIC16F876-20I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-13T00:49:05Z",+      "checked_at": "2026-11-17T20:15:55Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16F876-20I/SO-ND",@@ -59,37 +59,37 @@         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA0, which can also be analog input 0 (TTL input buffer)."+        "description": "PORTA bi-directional I/O with TTL input buffer; RA0 can also be analog input 0."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA1, which can also be analog input 1 (TTL input buffer)."+        "description": "PORTA bi-directional I/O with TTL input buffer; RA1 can also be analog input 1."       },       {         "number": "4",         "name": "RA2/AN2/VREF-",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA2, which can also be analog input 2 or negative analog reference voltage (TTL input buffer)."+        "description": "PORTA bi-directional I/O with TTL input buffer; RA2 can also be analog input 2 or the negative analog reference voltage."       },       {         "number": "5",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA3, which can also be analog input 3 or positive analog reference voltage (TTL input buffer)."+        "description": "PORTA bi-directional I/O with TTL input buffer; RA3 can also be analog input 3 or the positive analog reference voltage."       },       {         "number": "6",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA4, which can also be the clock input to Timer0; output is open drain type (Schmitt Trigger input)."+        "description": "PORTA I/O with Schmitt Trigger input; RA4 can also be the Timer0 clock input, and its output is open drain type."       },       {         "number": "7",         "name": "RA5/SS/AN4",         "type": "bidirectional",-        "description": "PORTA bidirectional I/O pin RA5, which can also be analog input 4 or the slave select for the synchronous serial port (TTL input buffer)."+        "description": "PORTA I/O with TTL input buffer; RA5 can also be analog input 4 or the slave select for the synchronous serial port."       },       {         "number": "8",@@ -101,61 +101,61 @@         "number": "9",         "name": "OSC1/CLKIN",         "type": "input",-        "description": "Oscillator crystal input or external clock source input (Schmitt Trigger input in RC mode, CMOS input otherwise)."+        "description": "Oscillator crystal input or external clock source input, with a Schmitt Trigger buffer in RC oscillator mode and a CMOS input otherwise."       },       {         "number": "10",         "name": "OSC2/CLKOUT",         "type": "output",-        "description": "Oscillator crystal output connecting to crystal or resonator in crystal oscillator mode; in RC mode outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to a crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1."       },       {         "number": "11",         "name": "RC0/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC0, which can also be the Timer1 oscillator output or Timer1 clock input (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC0 can also be the Timer1 oscillator output or Timer1 clock input."       },       {         "number": "12",         "name": "RC1/T1OSI/CCP2",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC1, which can also be the Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC1 can also be the Timer1 oscillator input or Capture2 input, Compare2 output, or PWM2 output."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC2, which can also be the Capture1 input/Compare1 output/PWM1 output (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC2 can also be the Capture1 input, Compare1 output, or PWM1 output."       },       {         "number": "14",         "name": "RC3/SCK/SCL",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC3, which can also be the synchronous serial clock input/output for both SPI and I2C modes (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC3 can also be the synchronous serial clock input/output for both SPI and I2C modes."       },       {         "number": "15",         "name": "RC4/SDI/SDA",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC4, which can also be the SPI Data In (SPI mode) or data I/O (I2C mode) (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC4 can also be the SPI Data In (SPI mode) or data I/O (I2C mode)."       },       {         "number": "16",         "name": "RC5/SDO",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC5, which can also be the SPI Data Out (SPI mode) (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC5 can also be the SPI Data Out (SPI mode)."       },       {         "number": "17",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC6, which can also be the USART Asynchronous Transmit or Synchronous Clock (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC6 can also be the USART asynchronous transmit or synchronous clock."       },       {         "number": "18",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "PORTC bidirectional I/O pin RC7, which can also be the USART Asynchronous Receive or Synchronous Data (Schmitt Trigger input)."+        "description": "PORTC bi-directional I/O with Schmitt Trigger input; RC7 can also be the USART asynchronous receive or synchronous data."       },       {         "number": "19",@@ -167,55 +167,55 @@         "number": "20",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply for logic and I/O pins."+        "description": "Positive supply for logic and I/O pins; the features list gives the device operating voltage range as 2.0V to 5.5V."       },       {         "number": "21",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB0, which can also be the external interrupt pin (TTL/Schmitt Trigger input when configured as interrupt); PORTB supports software-programmed weak pull-ups."+        "description": "PORTB bi-directional I/O with TTL input buffer (Schmitt Trigger when used as external interrupt); RB0 can also be the external interrupt pin, and PORTB pins can be software-programmed for internal weak pull-up."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB1 (TTL input buffer); PORTB supports software-programmed weak pull-ups."+        "description": "PORTB bi-directional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-up."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB2 (TTL input buffer); PORTB supports software-programmed weak pull-ups."+        "description": "PORTB bi-directional I/O with TTL input buffer; PORTB pins can be software-programmed for internal weak pull-up."       },       {         "number": "24",         "name": "RB3/PGM",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB3, which can also be the low voltage programming input (TTL input buffer)."+        "description": "PORTB bi-directional I/O with TTL input buffer; RB3 can also be the low voltage programming input."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB4 with interrupt-on-change (TTL input buffer)."+        "description": "PORTB bi-directional I/O with TTL input buffer; RB4 is an interrupt-on-change pin."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB5 with interrupt-on-change (TTL input buffer)."+        "description": "PORTB bi-directional I/O with TTL input buffer; RB5 is an interrupt-on-change pin."       },       {         "number": "27",         "name": "RB6/PGC",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB6, which can also be the interrupt-on-change pin or In-Circuit Debugger pin and serial programming clock (TTL/Schmitt Trigger input in serial programming mode)."+        "description": "PORTB bi-directional I/O with Schmitt Trigger input in serial programming mode; RB6 can also be an interrupt-on-change pin, an In-Circuit Debugger pin, or the serial programming clock."       },       {         "number": "28",         "name": "RB7/PGD",         "type": "bidirectional",-        "description": "PORTB bidirectional I/O pin RB7, which can also be the interrupt-on-change pin or In-Circuit Debugger pin and serial programming data (TTL/Schmitt Trigger input in serial programming mode)."+        "description": "PORTB bi-directional I/O with Schmitt Trigger input in serial programming mode; RB7 can also be an interrupt-on-change pin, an In-Circuit Debugger pin, or the serial programming data."       }     ],     "provenance": {@@ -229,11 +229,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The SOIC pin numbers are taken from Table 1-1 (PIC16F873/PIC16F876 pinout), whose SOIC column matche; The datasheet pinout is for the PIC16F876 family (28-pin devices). The text confirms a 28-lead SOIC ; Headline electrical specs in the excerpt (2.0 V to 5.5 V supply, DC to 20 MHz, 25 mA high sink/sourc"+          "extractor flagged: The pin-level electrical limits (absolute maximum ratings, input/output levels, supply current) are ; The SOIC pin numbers come from the PIC16F873/876 table (Table 1-1) on page 7. The 28-lead SOIC mecha; The schema has no field for headline electrical specs. The 2.0V to 5.5V operating range and the 25 m"         ],         "pages_sent": 21,-        "cost_usd": 0.1344,-        "at": "2026-11-13T00:48:48"+        "cost_usd": 0.1346,+        "at": "2026-11-17T20:15:24"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30292D.pdf",@@ -270,7 +270,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-13",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -288,13 +288,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "11bd64bd0ce69991bf1425dc1af1987ec375402f29f7a5e7fc404b3bb3488dc5",-        "checked": "2026-11-13",+        "sha256": "a49df1c32e1decf8ac543bf770ffd8b2b1181cffd5cdfedf5990e4a3690afd36",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO (SOIC) 28-Lead Wide 300 mil, MS-013, C04-052",+      "package_code": "SO (SOIC) 28-Lead Wide 300 mil",       "source_page": 192,       "D": {         "nom_mm": 17.87,@@ -1019,5 +1019,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic16f876-20i-so.lbr+1−1
@@ -185,7 +185,7 @@         <technology name="">           <attribute name="MPN" value="PIC16F876-20I/SO" constant="no"/>           <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>-          <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/113d8419f096990997b30a4e9f46cd13.pdf" constant="no"/>+          <attribute name="DATASHEET" value="https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30292D.pdf" constant="no"/>           <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic16f876-20i-so" constant="no"/>           <attribute name="MOUSER_PN" value="579-PIC16F876-20I/SO" constant="no"/>           <attribute name="DIGIKEY_PN" value="PIC16F876-20I/SO-ND" constant="no"/>