← Commit history
README.md+71−68
@@ -8,34 +8,34 @@ PIC16F872T-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptio  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | MCLR/VPP | input | Active-low Master Clear (Reset) input to the device, which doubles as the programming voltage input (VPP). |-| 2 | RA0/AN0 | bidirectional | Bidirectional TTL digital I/O pin, also analog input 0 (AN0). |-| 3 | RA1/AN1 | bidirectional | Bidirectional TTL digital I/O pin, also analog input 1 (AN1). |-| 4 | RA2/AN2/VREF- | bidirectional | Bidirectional TTL digital I/O pin, also analog input 2 (AN2) and negative analog reference voltage (VREF-). |-| 5 | RA3/AN3/VREF+ | bidirectional | Bidirectional TTL digital I/O pin, also analog input 3 (AN3) and positive analog reference voltage (VREF+). |-| 6 | RA4/T0CKI | bidirectional | Bidirectional Schmitt-trigger digital I/O that is open drain when configured as an output; also the Timer0 clock input (T0CKI). |-| 7 | RA5/AN4/SS | bidirectional | Bidirectional TTL digital I/O pin, also the slave select input (SS) for the synchronous serial port and analog input 4 (AN4). |+| 1 | MCLR/VPP | input | Master Clear (Reset) input is an active-low RESET to the device, and this pin also serves as the programming voltage input (VPP). |+| 2 | RA0/AN0 | bidirectional | Digital I/O (TTL input buffer) that also serves as analog input 0. |+| 3 | RA1/AN1 | bidirectional | Digital I/O (TTL input buffer) that also serves as analog input 1. |+| 4 | RA2/AN2/VREF- | bidirectional | Digital I/O (TTL input buffer) that also serves as analog input 2 and as the negative analog reference voltage. |+| 5 | RA3/AN3/VREF+ | bidirectional | Digital I/O (TTL input buffer) that also serves as analog input 3 and as the positive analog reference voltage. |+| 6 | RA4/T0CKI | bidirectional | Digital I/O (Schmitt Trigger input, open drain when configured as output) that also serves as the Timer0 clock input. |+| 7 | RA5/AN4/SS | bidirectional | Digital I/O (TTL input buffer) that also serves as the Slave Select input for the Synchronous Serial Port and as analog input 4. | | 8 | VSS | power_in | Ground reference for logic and I/O pins. |-| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input; Schmitt-trigger buffer when configured in RC mode, otherwise CMOS. |-| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to the crystal or resonator; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |-| 11 | RC0/T1OSO/T1CKI | bidirectional | Bidirectional Schmitt-trigger digital I/O pin, also the Timer1 oscillator output (T1OSO) and Timer1 clock input (T1CKI). |-| 12 | RC1/T1OSI/CCP2 | bidirectional | Bidirectional Schmitt-trigger digital I/O pin, also the Timer1 oscillator input (T1OSI). |-| 13 | RC2/CCP1 | bidirectional | Bidirectional Schmitt-trigger digital I/O pin, also Capture1 input, Compare1 output or PWM1 output. |-| 14 | RC3/SCK/SCL | bidirectional | Bidirectional Schmitt-trigger digital I/O pin, also the synchronous serial clock input/output for SPI mode (SCK) and I2C mode (SCL). |-| 15 | RC4/SDI/SDA | bidirectional | Bidirectional Schmitt-trigger digital I/O pin, also the SPI data in pin (SDI) and I2C data I/O pin (SDA). |-| 16 | RC5/SDO | bidirectional | Bidirectional Schmitt-trigger digital I/O pin, also the SPI data out pin (SDO). |-| 17 | RC6 | bidirectional | Bidirectional Schmitt-trigger digital I/O pin. |-| 18 | RC7 | bidirectional | Bidirectional Schmitt-trigger digital I/O pin. |+| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input (Schmitt Trigger input in RC mode, otherwise CMOS). |+| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to the crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |+| 11 | RC0/T1OSO/T1CKI | bidirectional | Schmitt Trigger digital I/O that also serves as the Timer1 oscillator output and the Timer1 clock input. |+| 12 | RC1/T1OSI | bidirectional | Schmitt Trigger digital I/O that also serves as the Timer1 oscillator input. |+| 13 | RC2/CCP1 | bidirectional | Schmitt Trigger digital I/O that also serves as Capture1 input, Compare1 output, or PWM1 output. |+| 14 | RC3/SCK/SCL | bidirectional | Schmitt Trigger digital I/O that also serves as the synchronous serial clock input/output for SPI mode and for I2C mode. |+| 15 | RC4/SDI/SDA | bidirectional | Schmitt Trigger digital I/O that also serves as the SPI Data In pin (SPI mode) and the SPI Data I/O pin (I2C mode). |+| 16 | RC5/SDO | bidirectional | Schmitt Trigger digital I/O that also serves as the SPI Data Out pin (SPI mode). |+| 17 | RC6 | bidirectional | Schmitt Trigger digital I/O. |+| 18 | RC7 | bidirectional | Schmitt Trigger digital I/O. | | 19 | VSS | power_in | Ground reference for logic and I/O pins. | | 20 | VDD | power_in | Positive supply for logic and I/O pins. |-| 21 | RB0/INT | bidirectional | Bidirectional TTL/Schmitt-trigger digital I/O pin (Schmitt-trigger when used as the external interrupt INT), with software-programmable weak pull-up. |-| 22 | RB1 | bidirectional | Bidirectional TTL digital I/O pin with software-programmable weak pull-up. |-| 23 | RB2 | bidirectional | Bidirectional TTL digital I/O pin with software-programmable weak pull-up. |-| 24 | RB3/PGM | bidirectional | Bidirectional TTL digital I/O pin, also the low-voltage ICSP programming enable pin (PGM), with software-programmable weak pull-up. |-| 25 | RB4 | bidirectional | Bidirectional TTL digital I/O pin with software-programmable weak pull-up. |-| 26 | RB5 | bidirectional | Bidirectional TTL digital I/O pin with software-programmable weak pull-up. |-| 27 | RB6/PGC | bidirectional | Bidirectional digital I/O pin (TTL/Schmitt-trigger in serial programming mode), also the in-circuit debugger and ICSP programming clock (PGC), with software-programmable weak pull-up. |-| 28 | RB7/PGD | bidirectional | Bidirectional digital I/O pin (TTL/Schmitt-trigger in serial programming mode), also the in-circuit debugger and ICSP programming data (PGD), with software-programmable weak pull-up. |+| 21 | RB0/INT | bidirectional | Digital I/O (TTL/Schmitt Trigger input when configured as the external interrupt) that also serves as the external interrupt pin INT. |+| 22 | RB1 | bidirectional | TTL digital I/O. |+| 23 | RB2 | bidirectional | TTL digital I/O. |+| 24 | RB3/PGM | bidirectional | TTL digital I/O that also serves as the low-voltage ICSP programming enable pin. |+| 25 | RB4 | bidirectional | TTL digital I/O. |+| 26 | RB5 | bidirectional | TTL digital I/O. |+| 27 | RB6/PGC | bidirectional | Digital I/O (TTL/Schmitt Trigger input in serial programming mode) that also serves as the In-Circuit Debugger and ICSP programming clock. |+| 28 | RB7/PGD | bidirectional | Digital I/O (TTL/Schmitt Trigger input in serial programming mode) that also serves as the In-Circuit Debugger and ICSP programming data. |  ## Key specifications @@ -54,52 +54,55 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries |---|---|---|---|---|---|---|---| | Ambient temperature under bias |  | -55 |  | 125 | °C |  | 119 | | Storage temperature |  | -65 |  | 150 | °C |  | 119 |-| Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) |  | -0.3 |  |  | V | upper limit printed as (VDD + 0.3V) | 119 |-| Voltage on VDD with respect to VSS |  | -0.3 |  | 7.5 | V |  | 119 |-| Voltage on MCLR with respect to VSS |  | 0 |  | 14 | V | Note 2: spikes below VSS may cause latch-up | 119 |-| Voltage on RA4 with respect to VSS |  | 0 |  | 8.5 | V |  | 119 |-| Total power dissipation |  |  |  | 1 | W | Note 1: power dissipation formula | 119 |+| Voltage on any pin with respect to VSS |  | -0.3 |  |  | V | Except VDD, MCLR and RA4; upper limit printed as VDD + 0.3V | 119 |+| Voltage on VDD with respect to VSS | VDD | -0.3 |  | 7.5 | V |  | 119 |+| Voltage on MCLR with respect to VSS | MCLR | 0 |  | 14 | V | Note 2 | 119 |+| Voltage on RA4 with respect to VSS | RA4 | 0 |  | 8.5 | V |  | 119 |+| Total power dissipation |  |  |  | 1 | W | Note 1 power dissipation formula | 119 | | Input clamp current | IIK | -20 |  | 20 | mA | VI < 0 or VI > VDD | 119 | | Output clamp current | IOK | -20 |  | 20 | mA | VO < 0 or VO > VDD | 119 |-| Operating temperature (industrial) | TA | -40 |  | 85 | °C | industrial; commercial is 0 to +70 °C | 121 |-| VDD Supply Voltage (LP, XT, RC osc configuration) | VDD | 4 |  | 5.5 | V | LP, XT, RC osc configuration | 121 |-| VDD Supply Voltage (BOR enabled, FMAX = 14 MHz) | VDD |  |  | 5.5 | V | BOR enabled, FMAX = 14 MHz | 121 |-| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 |  |  | V/ms | See section on Power-on Reset for details | 121 |-| Brown-out Reset Voltage | VBOR | 3.7 | 4 | 4.35 | V | BODEN bit in configuration word enabled | 121 |-| Supply Current (RC osc configurations) | IDD |  | 1.6 | 4 | mA | RC osc configurations FOSC = 4 MHz, VDD = 5.5V | 121 |-| Supply Current (HS osc configuration) | IDD |  | 7 | 15 | mA | HS osc configuration, FOSC = 20 MHz, VDD = 5.5V | 121 |-| Brown-out Reset Current | ΔIBOR |  | 85 | 200 | μA | BOR enabled, VDD = 5.0V | 122 |-| Power-down Current (WDT enabled) | IPD |  | 10.5 | 42 | μA | VDD = 4.0V, WDT enabled, -40°C to +85°C | 122 |-| Power-down Current (WDT disabled) | IPD |  | 1.5 | 16 | μA | VDD = 4.0V, WDT disabled, -40°C to +85°C | 122 |-| Power-down Current (WDT disabled, D021A) | IPD |  |  | 19 | μA | VDD = 4.0V, WDT disabled, -40°C to +85°C | 122 |-| Brown-out Reset Current (D023) | ΔIBOR |  | 85 | 200 | μA | BOR enabled, VDD = 5.0V | 122 |-| Input Low Voltage, RC3 and RC4 with SMBus | VIL | -0.5 |  | 0.6 | V | for VDD = 4.5 to 5.5V | 123 |-| Input High Voltage, I/O ports with TTL buffer | VIH | 2 |  |  | V | 4.5V ≤ VDD ≤ 5.5V | 123 |-| Input High Voltage, RC3 and RC4 with SMBus | VIH | 1.4 |  | 5.5 | V | for VDD = 4.5 to 5.5V | 123 |-| Input Leakage Current, I/O ports | IIL | -1 |  | 1 | μA | Vss ≤ VPIN ≤ VDD, Pin at hi-impedance | 123 |-| Input Leakage Current, MCLR and RA4/T0CKI | IIL | -5 |  | 5 | μA | Vss ≤ VPIN ≤ VDD | 123 |-| Input Leakage Current, OSC1 | IIL | -5 |  | 5 | μA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 123 |-| PORTB Weak Pull-up Current | IPURB | 50 | 250 | 400 | μA | VDD = 5V, VPIN = VSS, -40°C TO +85°C | 123 |-| Output Low Voltage, I/O ports | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 124 |-| Output Low Voltage, OSC2/CLKOUT (RC osc config) | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 124 |-| OSC2 Capacitive Loading | COSC2 |  |  | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 124 |-| I/O pin and OSC2 (RC mode) Capacitive Loading | CIO |  |  | 50 | pF | All I/O pins and OSC2 (RC mode) | 124 |-| SCL, SDA Bus Capacitive Loading (I2C mode) | CB |  |  | 400 | pF | SCL, SDA (I2C mode) | 124 |-| VDD for read/write (EEPROM) | VDRW |  |  | 5.5 | V | Using EECON to read/write; VMIN = min. operating voltage | 124 |-| Data EEPROM Erase/write cycle time | TDEW |  | 4 | 8 | ms |  | 124 |-| Program FLASH Endurance | EP | 1000 |  |  | E/W | 25°C at 5V | 124 |+| Operating temperature (industrial) | TA | -40 |  | 85 | °C | Industrial standard operating conditions | 121 |+| Supply voltage | VDD | 4 |  | 5.5 | V | LP, XT, RC osc configuration | 121 |+| Supply voltage | VDD | 4.5 |  | 5.5 | V | HS osc configuration | 121 |+| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 |  |  | V/ms | See section on Power-on Reset for details | 121 |+| Brown-out Reset voltage | VBOR | 3.7 | 4 | 4.35 | V | BODEN bit in configuration word enabled | 121 |+| Supply current (RC) | IDD |  | 1.6 | 4 | mA | RC osc configurations, FOSC = 4 MHz, VDD = 5.5V | 121 |+| Supply current (HS) | IDD |  | 7 | 15 | mA | HS osc configuration, FOSC = 20 MHz, VDD = 5.5V | 121 |+| Brown-out Reset current | ΔIBOR |  | 85 | 200 | μA | BOR enabled, VDD = 5.0V | 122 |+| Power-down current (WDT enabled) | IPD |  | 10.5 | 42 | μA | VDD = 4.0V, WDT enabled, -40°C to +85°C | 122 |+| Power-down current (WDT disabled) | IPD |  | 1.5 | 16 | μA | VDD = 4.0V, WDT disabled, -40°C to +85°C | 122 |+| Power-down current (WDT disabled, alternate row) | IPD |  |  | 19 | μA | VDD = 4.0V, WDT disabled, -40°C to +85°C | 122 |+| Input high voltage, I/O ports with TTL buffer | VIH | 2 |  |  | V | 4.5V ≤ VDD ≤ 5.5V | 123 |+| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | μA | VDD = 5V, VPIN = VSS, -40°C to +85°C | 123 |+| Input leakage current, I/O ports | IIL | -1 |  | 1 | μA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance | 123 |+| Input leakage current, MCLR and RA4/T0CKI | IIL | -5 |  | 5 | μA | Vss ≤ VPIN ≤ VDD | 123 |+| Input leakage current, OSC1 | IIL | -5 |  | 5 | μA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 123 |+| Output low voltage, I/O ports | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 124 |+| Output low voltage, OSC2/CLKOUT (RC osc config) | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 124 |+| Open drain high voltage, RA4 pin | VOD |  |  | 8.5 | V | RA4 pin | 124 |+| OSC2 pin capacitive loading | COSC2 |  |  | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 124 |+| All I/O pins and OSC2 capacitive loading | CIO |  |  | 50 | pF | RC mode for OSC2 | 124 |+| SCL, SDA bus capacitive loading | CB |  |  | 400 | pF | I2C mode | 124 |+| Data EEPROM endurance | ED | 100 |  |  | K E/W | 25°C at 5V | 124 |+| VDD for read/write (data EEPROM) | VDRW |  |  | 5.5 | V | Using EECON to read/write | 124 |+| Data EEPROM erase/write cycle time | TDEW |  | 4 | 8 | ms |  | 124 |+| Program FLASH endurance | EP | 1000 |  |  | E/W | 25°C at 5V | 124 | | VDD for read (program FLASH) | VPR |  |  | 5.5 | V | VMIN = min. operating voltage | 124 | | VDD for erase/write (program FLASH) | VDD |  |  | 5.5 | V | Using EECON to read/write, VMIN = min. operating voltage | 124 |-| Program FLASH Erase/Write cycle time | TPEW |  | 4 | 8 | ms |  | 124 |-| Open Drain High Voltage, RA4 pin | VOD |  |  | 8.5 | V | RA4 pin | 124 |-| Integral Linearity Error | EIL | -1 |  | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 136 |-| Differential Linearity Error | EDL | -1 |  | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 136 |-| Offset Error | EOFF | -2 |  | 2 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 136 |-| Gain Error | EGN | -1 |  | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 136 |-| Reference Voltage (VREF+ - VREF-) | VREF | 2 |  |  | V | Absolute minimum electrical spec. to ensure 10-bit accuracy. | 136 |-| Recommended Impedance of Analog Voltage Source | ZAIN |  |  | 10 | kΩ |  | 136 |-| Port output rise time | TIOR |  | 10 | 40 | ns | Standard (F) | 130 |-| Port output fall time | TIOF |  | 10 | 40 | ns | Standard (F) | 130 |+| Program FLASH erase/write cycle time | TPEW |  | 4 | 8 | ms |  | 124 |+| A/D resolution | NR |  |  | 10 | bits | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 138 |+| A/D integral linearity error | EIL | -1 |  | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 138 |+| A/D differential linearity error | EDL | -1 |  | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 138 |+| A/D offset error | EOFF | -2 |  | 2 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 138 |+| A/D gain error | EGN | -1 |  | 1 | LSb | VREF = VDD = 5.12V, VSS ≤ VAIN ≤ VREF | 138 |+| A/D reference voltage (VREF+ - VREF-) | VREF | 2 |  |  | V | Absolute minimum electrical spec. to ensure 10-bit accuracy | 138 |+| Recommended impedance of analog voltage source | ZAIN |  |  | 10 | kΩ |  | 138 |+| Clock high time | THIGH | 4 |  |  | μs | 100 kHz mode; device must operate at a minimum of 1.5 MHz | 137 |+| Clock high time | THIGH | 0.6 |  |  | μs | 400 kHz mode; device must operate at a minimum of 10 MHz | 137 |+| Clock low time | TLOW | 4.7 |  |  | μs | 100 kHz mode; device must operate at a minimum of 1.5 MHz | 137 |+| Clock low time | TLOW | 1.3 |  |  | μs | 400 kHz mode; device must operate at a minimum of 10 MHz | 137 |+| Data input setup time | TSU:DAT | 250 |  |  | ns | 100 kHz mode | 137 |+| Data input setup time | TSU:DAT | 100 |  |  | ns | 400 kHz mode | 137 |  ## CAD (KiCad official) @@ -112,7 +115,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/30221c.pdf) (168 pp, sha256 `65bfeec06751e6d6`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/30221c.pdf) (168 pp, sha256 `65bfeec06751e6d6`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+39−40
@@ -1,6 +1,6 @@ {   "slug": "pic16f872t-i-so",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic16f872t-i-so-hero.glb",-    "pic16f872t-i-so-hero.overlay.json",-    "pic16f872t-i-so-etched.glb"+    "pic16f872t-i-so-hero.overlay.json"   ],   "component": {     "mpn": "PIC16F872T-I/SO",@@ -43,21 +42,21 @@       "symbol": "pic16f872t-i-so.kicad_sym",       "footprint": "pic16f872t-i-so.kicad_mod",       "model_3d": "pic16f872t-i-so-hero.glb",-      "model_3d_plain": "pic16f872t-i-so-etched.glb",+      "model_3d_plain": "pic16f872t-i-so.glb",       "model_3d_step": "pic16f872t-i-so-etched.step",       "model_3d_step_plain": "pic16f872t-i-so.step",       "lbr": "pic16f872t-i-so.lbr"     },     "distributor_links": {       "lcsc": "C629736",-      "digikey": "PIC16F872T-I/SOTR-ND",+      "digikey": "PIC16F872T-I/SOCT-ND",       "mouser": "579-PIC16F872T-I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T18:00:00Z",+      "checked_at": "2026-11-13T01:22:20Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {-        "pn": "PIC16F872T-I/SOTR-ND",+        "pn": "PIC16F872T-I/SOCT-ND",         "status": "found"       },       "mouser": {@@ -71,43 +70,43 @@         "number": "1",         "name": "MCLR/VPP",         "type": "input",-        "description": "Active-low Master Clear (Reset) input to the device, which doubles as the programming voltage input (VPP)."+        "description": "Master Clear (Reset) input is an active-low RESET to the device, and this pin also serves as the programming voltage input (VPP)."       },       {         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also analog input 0 (AN0)."+        "description": "Digital I/O (TTL input buffer) that also serves as analog input 0."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also analog input 1 (AN1)."+        "description": "Digital I/O (TTL input buffer) that also serves as analog input 1."       },       {         "number": "4",         "name": "RA2/AN2/VREF-",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also analog input 2 (AN2) and negative analog reference voltage (VREF-)."+        "description": "Digital I/O (TTL input buffer) that also serves as analog input 2 and as the negative analog reference voltage."       },       {         "number": "5",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also analog input 3 (AN3) and positive analog reference voltage (VREF+)."+        "description": "Digital I/O (TTL input buffer) that also serves as analog input 3 and as the positive analog reference voltage."       },       {         "number": "6",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O that is open drain when configured as an output; also the Timer0 clock input (T0CKI)."+        "description": "Digital I/O (Schmitt Trigger input, open drain when configured as output) that also serves as the Timer0 clock input."       },       {         "number": "7",         "name": "RA5/AN4/SS",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also the slave select input (SS) for the synchronous serial port and analog input 4 (AN4)."+        "description": "Digital I/O (TTL input buffer) that also serves as the Slave Select input for the Synchronous Serial Port and as analog input 4."       },       {         "number": "8",@@ -119,61 +118,61 @@         "number": "9",         "name": "OSC1/CLKI",         "type": "input",-        "description": "Oscillator crystal input or external clock source input; Schmitt-trigger buffer when configured in RC mode, otherwise CMOS."+        "description": "Oscillator crystal input or external clock source input (Schmitt Trigger input in RC mode, otherwise CMOS)."       },       {         "number": "10",         "name": "OSC2/CLKO",         "type": "output",-        "description": "Oscillator crystal output connecting to the crystal or resonator; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to the crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."       },       {         "number": "11",         "name": "RC0/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also the Timer1 oscillator output (T1OSO) and Timer1 clock input (T1CKI)."+        "description": "Schmitt Trigger digital I/O that also serves as the Timer1 oscillator output and the Timer1 clock input."       },       {         "number": "12",-        "name": "RC1/T1OSI/CCP2",+        "name": "RC1/T1OSI",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also the Timer1 oscillator input (T1OSI)."+        "description": "Schmitt Trigger digital I/O that also serves as the Timer1 oscillator input."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also Capture1 input, Compare1 output or PWM1 output."+        "description": "Schmitt Trigger digital I/O that also serves as Capture1 input, Compare1 output, or PWM1 output."       },       {         "number": "14",         "name": "RC3/SCK/SCL",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also the synchronous serial clock input/output for SPI mode (SCK) and I2C mode (SCL)."+        "description": "Schmitt Trigger digital I/O that also serves as the synchronous serial clock input/output for SPI mode and for I2C mode."       },       {         "number": "15",         "name": "RC4/SDI/SDA",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also the SPI data in pin (SDI) and I2C data I/O pin (SDA)."+        "description": "Schmitt Trigger digital I/O that also serves as the SPI Data In pin (SPI mode) and the SPI Data I/O pin (I2C mode)."       },       {         "number": "16",         "name": "RC5/SDO",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also the SPI data out pin (SDO)."+        "description": "Schmitt Trigger digital I/O that also serves as the SPI Data Out pin (SPI mode)."       },       {         "number": "17",         "name": "RC6",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin."+        "description": "Schmitt Trigger digital I/O."       },       {         "number": "18",         "name": "RC7",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin."+        "description": "Schmitt Trigger digital I/O."       },       {         "number": "19",@@ -191,49 +190,49 @@         "number": "21",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "Bidirectional TTL/Schmitt-trigger digital I/O pin (Schmitt-trigger when used as the external interrupt INT), with software-programmable weak pull-up."+        "description": "Digital I/O (TTL/Schmitt Trigger input when configured as the external interrupt) that also serves as the external interrupt pin INT."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin with software-programmable weak pull-up."+        "description": "TTL digital I/O."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin with software-programmable weak pull-up."+        "description": "TTL digital I/O."       },       {         "number": "24",         "name": "RB3/PGM",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also the low-voltage ICSP programming enable pin (PGM), with software-programmable weak pull-up."+        "description": "TTL digital I/O that also serves as the low-voltage ICSP programming enable pin."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin with software-programmable weak pull-up."+        "description": "TTL digital I/O."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin with software-programmable weak pull-up."+        "description": "TTL digital I/O."       },       {         "number": "27",         "name": "RB6/PGC",         "type": "bidirectional",-        "description": "Bidirectional digital I/O pin (TTL/Schmitt-trigger in serial programming mode), also the in-circuit debugger and ICSP programming clock (PGC), with software-programmable weak pull-up."+        "description": "Digital I/O (TTL/Schmitt Trigger input in serial programming mode) that also serves as the In-Circuit Debugger and ICSP programming clock."       },       {         "number": "28",         "name": "RB7/PGD",         "type": "bidirectional",-        "description": "Bidirectional digital I/O pin (TTL/Schmitt-trigger in serial programming mode), also the in-circuit debugger and ICSP programming data (PGD), with software-programmable weak pull-up."+        "description": "Digital I/O (TTL/Schmitt Trigger input in serial programming mode) that also serves as the In-Circuit Debugger and ICSP programming data."       }     ],     "provenance": {@@ -247,11 +246,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin numbers and assignments come from Table 1-2 (pinout description) and the pin diagram on page 3, ; The page 3 pin diagram labels pins 17 and 18 as RC6/TX/CK and RC7/RX/DT, but Table 1-2 and the port ; The pin 12 name includes CCP2 only in the page 3 pin diagram and the page 5 block diagram label. Tab"+          "extractor flagged: The provided text gives the pin diagram and pinout table, which are shared by the DIP, SOIC and SSOP; Pin 12 is labelled 'RC1/T1OSI/CCP2' in the pin diagram on page 3 but 'RC1/T1OSI' in Table 1-2 on pag; Pin 1 is classed as 'input' because MCLR/VPP is listed as I/P in the table, and the VPP function is "         ],         "pages_sent": 22,-        "cost_usd": 0.145,-        "at": "2026-11-12T17:59:45"+        "cost_usd": 0.1443,+        "at": "2026-11-13T01:22:02"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/30221c.pdf",@@ -288,7 +287,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -306,13 +305,13 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "7b682cc5580b564a51bd6a182d74d6af808bbbc65869db6d981a44dd61644db5",-        "checked": "2026-11-12",+        "sha256": "c8e326ae11836deefa694f36c4a3958ef140ce0671db5b9aafd6e2cfd3ad0ad5",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO (SOIC) 28-lead, 300 mil, C04-052 (MS-013)",+      "package_code": "SO",       "source_page": 155,       "D": {         "nom_mm": 17.87,
page.json+42−41
@@ -4,7 +4,7 @@   "slug": "pic16f872t-i-so",   "title": "PIC16F872T-I/SO",   "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,21 +25,21 @@       "symbol": "pic16f872t-i-so.kicad_sym",       "footprint": "pic16f872t-i-so.kicad_mod",       "model_3d": "pic16f872t-i-so-hero.glb",-      "model_3d_plain": "pic16f872t-i-so-etched.glb",+      "model_3d_plain": "pic16f872t-i-so.glb",       "model_3d_step": "pic16f872t-i-so-etched.step",       "model_3d_step_plain": "pic16f872t-i-so.step",       "lbr": "pic16f872t-i-so.lbr"     },     "distributor_links": {       "lcsc": "C629736",-      "digikey": "PIC16F872T-I/SOTR-ND",+      "digikey": "PIC16F872T-I/SOCT-ND",       "mouser": "579-PIC16F872T-I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T18:00:00Z",+      "checked_at": "2026-11-13T01:22:20Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {-        "pn": "PIC16F872T-I/SOTR-ND",+        "pn": "PIC16F872T-I/SOCT-ND",         "status": "found"       },       "mouser": {@@ -53,43 +53,43 @@         "number": "1",         "name": "MCLR/VPP",         "type": "input",-        "description": "Active-low Master Clear (Reset) input to the device, which doubles as the programming voltage input (VPP)."+        "description": "Master Clear (Reset) input is an active-low RESET to the device, and this pin also serves as the programming voltage input (VPP)."       },       {         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also analog input 0 (AN0)."+        "description": "Digital I/O (TTL input buffer) that also serves as analog input 0."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also analog input 1 (AN1)."+        "description": "Digital I/O (TTL input buffer) that also serves as analog input 1."       },       {         "number": "4",         "name": "RA2/AN2/VREF-",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also analog input 2 (AN2) and negative analog reference voltage (VREF-)."+        "description": "Digital I/O (TTL input buffer) that also serves as analog input 2 and as the negative analog reference voltage."       },       {         "number": "5",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also analog input 3 (AN3) and positive analog reference voltage (VREF+)."+        "description": "Digital I/O (TTL input buffer) that also serves as analog input 3 and as the positive analog reference voltage."       },       {         "number": "6",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O that is open drain when configured as an output; also the Timer0 clock input (T0CKI)."+        "description": "Digital I/O (Schmitt Trigger input, open drain when configured as output) that also serves as the Timer0 clock input."       },       {         "number": "7",         "name": "RA5/AN4/SS",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also the slave select input (SS) for the synchronous serial port and analog input 4 (AN4)."+        "description": "Digital I/O (TTL input buffer) that also serves as the Slave Select input for the Synchronous Serial Port and as analog input 4."       },       {         "number": "8",@@ -101,61 +101,61 @@         "number": "9",         "name": "OSC1/CLKI",         "type": "input",-        "description": "Oscillator crystal input or external clock source input; Schmitt-trigger buffer when configured in RC mode, otherwise CMOS."+        "description": "Oscillator crystal input or external clock source input (Schmitt Trigger input in RC mode, otherwise CMOS)."       },       {         "number": "10",         "name": "OSC2/CLKO",         "type": "output",-        "description": "Oscillator crystal output connecting to the crystal or resonator; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to the crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."       },       {         "number": "11",         "name": "RC0/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also the Timer1 oscillator output (T1OSO) and Timer1 clock input (T1CKI)."+        "description": "Schmitt Trigger digital I/O that also serves as the Timer1 oscillator output and the Timer1 clock input."       },       {         "number": "12",-        "name": "RC1/T1OSI/CCP2",+        "name": "RC1/T1OSI",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also the Timer1 oscillator input (T1OSI)."+        "description": "Schmitt Trigger digital I/O that also serves as the Timer1 oscillator input."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also Capture1 input, Compare1 output or PWM1 output."+        "description": "Schmitt Trigger digital I/O that also serves as Capture1 input, Compare1 output, or PWM1 output."       },       {         "number": "14",         "name": "RC3/SCK/SCL",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also the synchronous serial clock input/output for SPI mode (SCK) and I2C mode (SCL)."+        "description": "Schmitt Trigger digital I/O that also serves as the synchronous serial clock input/output for SPI mode and for I2C mode."       },       {         "number": "15",         "name": "RC4/SDI/SDA",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also the SPI data in pin (SDI) and I2C data I/O pin (SDA)."+        "description": "Schmitt Trigger digital I/O that also serves as the SPI Data In pin (SPI mode) and the SPI Data I/O pin (I2C mode)."       },       {         "number": "16",         "name": "RC5/SDO",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin, also the SPI data out pin (SDO)."+        "description": "Schmitt Trigger digital I/O that also serves as the SPI Data Out pin (SPI mode)."       },       {         "number": "17",         "name": "RC6",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin."+        "description": "Schmitt Trigger digital I/O."       },       {         "number": "18",         "name": "RC7",         "type": "bidirectional",-        "description": "Bidirectional Schmitt-trigger digital I/O pin."+        "description": "Schmitt Trigger digital I/O."       },       {         "number": "19",@@ -173,49 +173,49 @@         "number": "21",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "Bidirectional TTL/Schmitt-trigger digital I/O pin (Schmitt-trigger when used as the external interrupt INT), with software-programmable weak pull-up."+        "description": "Digital I/O (TTL/Schmitt Trigger input when configured as the external interrupt) that also serves as the external interrupt pin INT."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin with software-programmable weak pull-up."+        "description": "TTL digital I/O."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin with software-programmable weak pull-up."+        "description": "TTL digital I/O."       },       {         "number": "24",         "name": "RB3/PGM",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin, also the low-voltage ICSP programming enable pin (PGM), with software-programmable weak pull-up."+        "description": "TTL digital I/O that also serves as the low-voltage ICSP programming enable pin."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin with software-programmable weak pull-up."+        "description": "TTL digital I/O."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "Bidirectional TTL digital I/O pin with software-programmable weak pull-up."+        "description": "TTL digital I/O."       },       {         "number": "27",         "name": "RB6/PGC",         "type": "bidirectional",-        "description": "Bidirectional digital I/O pin (TTL/Schmitt-trigger in serial programming mode), also the in-circuit debugger and ICSP programming clock (PGC), with software-programmable weak pull-up."+        "description": "Digital I/O (TTL/Schmitt Trigger input in serial programming mode) that also serves as the In-Circuit Debugger and ICSP programming clock."       },       {         "number": "28",         "name": "RB7/PGD",         "type": "bidirectional",-        "description": "Bidirectional digital I/O pin (TTL/Schmitt-trigger in serial programming mode), also the in-circuit debugger and ICSP programming data (PGD), with software-programmable weak pull-up."+        "description": "Digital I/O (TTL/Schmitt Trigger input in serial programming mode) that also serves as the In-Circuit Debugger and ICSP programming data."       }     ],     "provenance": {@@ -229,11 +229,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin numbers and assignments come from Table 1-2 (pinout description) and the pin diagram on page 3, ; The page 3 pin diagram labels pins 17 and 18 as RC6/TX/CK and RC7/RX/DT, but Table 1-2 and the port ; The pin 12 name includes CCP2 only in the page 3 pin diagram and the page 5 block diagram label. Tab"+          "extractor flagged: The provided text gives the pin diagram and pinout table, which are shared by the DIP, SOIC and SSOP; Pin 12 is labelled 'RC1/T1OSI/CCP2' in the pin diagram on page 3 but 'RC1/T1OSI' in Table 1-2 on pag; Pin 1 is classed as 'input' because MCLR/VPP is listed as I/P in the table, and the VPP function is "         ],         "pages_sent": 22,-        "cost_usd": 0.145,-        "at": "2026-11-12T17:59:45"+        "cost_usd": 0.1443,+        "at": "2026-11-13T01:22:02"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/30221c.pdf",@@ -270,7 +270,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -288,13 +288,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "7b682cc5580b564a51bd6a182d74d6af808bbbc65869db6d981a44dd61644db5",-        "checked": "2026-11-12",+        "sha256": "c8e326ae11836deefa694f36c4a3958ef140ce0671db5b9aafd6e2cfd3ad0ad5",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO (SOIC) 28-lead, 300 mil, C04-052 (MS-013)",+      "package_code": "SO",       "source_page": 155,       "D": {         "nom_mm": 17.87,@@ -967,10 +967,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic16f872t-i-so-hero.glb",-    "pic16f872t-i-so-hero.overlay.json",-    "pic16f872t-i-so-etched.glb"+    "pic16f872t-i-so-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic16f872t-i-so-hero.glb
⋯ 1 unchanged line ⋯
pic16f872t-i-so-hero.overlay.json+698−703
@@ -1,705 +1,700 @@ {- "spec": "adom-hero 1.4",- "mpn": "PIC16F872T-I",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {-  "pad_outlines": {-   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-   "rgba": [-    0.0,-    0.902,-    0.863,-    0.5-   ],-   "pads": 28,-   "span_mm": 17.11,-   "dash_mm": 0.4278,-   "gap_mm": 0.2567,-   "pad_stroke_mm": 0.09-  },-  "silkscreen": {-   "material": "Silkscreen reference lines - 30 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.3-   ],-   "footprint_items": 7,-   "pin1": {-    "source": "footprint silkscreen",-    "pad": "1"-   }-  },-  "signal_names": {-   "material": "Signal names - 50 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.5-   ],-   "font": "DejaVu Sans Mono",-   "labels": 28,-   "sides": "top + mirrored underside (single-sided)",-   "omitted": null,-   "fallback_to_pad_number": 0-  }- },- "align": {-  "ok": true,-  "board_underside": true,-  "electrical_pads_without_contact": [],-  "mounting_pads_left_out": [],-  "centre_offset_mm": 0.0,-  "over_pads": true,-  "tolerance_mm": 1.369,-  "orientation_flipped": false,-  "contacts_bbox_mm": [-   -5.15,-   5.15,-   -8.461,-   8.461+  "spec": "adom-hero 1.4",+  "mpn": "PIC16F872T-I/SO",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 28,+      "span_mm": 17.11,+      "dash_mm": 0.4278,+      "gap_mm": 0.2567,+      "pad_stroke_mm": 0.09+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 28,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 1.369,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -5.15,+      5.15,+      -8.461,+      8.461+    ],+    "pads_bbox_mm": [+      -5.675,+      5.675,+      -8.555,+      8.555+    ],+    "seating_z_mm": 0.001+  },+  "sources": {+    "glb": "pic16f872t-i-so-etched.glb",+    "glb_sha256": "5eea5fda06c9f3ec49760345d6676bbd5b7727ed7f13268fbc4f63550eb1826a",+    "footprint": "pic16f872t-i-so.kicad_mod",+    "footprint_sha256": "8df054b2353cacbe8e7228f97eacdd863eeebcfe7dc3a6315ee2deb370496519",+    "pins": "page.json component.pins",+    "pins_sha256": "fcf783fb4a7d734d91639ba58eb877b61bbc4cc756c489d0e273c5e84f11d739"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "MCLR/VPP",+      "x": -5.825,+      "y": -8.255,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "RA0/AN0",+      "x": -5.825,+      "y": -6.985,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "RA1/AN1",+      "x": -5.825,+      "y": -5.715,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "RA2/AN2/VREF-",+      "x": -5.825,+      "y": -4.445,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "RA3/AN3/VREF+",+      "x": -5.825,+      "y": -3.175,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "RA4/T0CKI",+      "x": -5.825,+      "y": -1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "RA5/AN4/SS",+      "x": -5.825,+      "y": -0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "VSS",+      "x": -5.825,+      "y": 0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "9",+      "text": "OSC1/CLKI",+      "x": -5.825,+      "y": 1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "10",+      "text": "OSC2/CLKO",+      "x": -5.825,+      "y": 3.175,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "11",+      "text": "RC0/T1OSO/T1CKI",+      "x": -5.825,+      "y": 4.445,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "12",+      "text": "RC1/T1OSI",+      "x": -5.825,+      "y": 5.715,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "13",+      "text": "RC2/CCP1",+      "x": -5.825,+      "y": 6.985,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "14",+      "text": "RC3/SCK/SCL",+      "x": -5.825,+      "y": 8.255,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "15",+      "text": "RC4/SDI/SDA",+      "x": 5.825,+      "y": 8.255,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "16",+      "text": "RC5/SDO",+      "x": 5.825,+      "y": 6.985,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "17",+      "text": "RC6",+      "x": 5.825,+      "y": 5.715,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "18",+      "text": "RC7",+      "x": 5.825,+      "y": 4.445,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "19",+      "text": "VSS",+      "x": 5.825,+      "y": 3.175,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "20",+      "text": "VDD",+      "x": 5.825,+      "y": 1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "21",+      "text": "RB0/INT",+      "x": 5.825,+      "y": 0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "22",+      "text": "RB1",+      "x": 5.825,+      "y": -0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "23",+      "text": "RB2",+      "x": 5.825,+      "y": -1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "24",+      "text": "RB3/PGM",+      "x": 5.825,+      "y": -3.175,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "25",+      "text": "RB4",+      "x": 5.825,+      "y": -4.445,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "26",+      "text": "RB5",+      "x": 5.825,+      "y": -5.715,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "27",+      "text": "RB6/PGC",+      "x": 5.825,+      "y": -6.985,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "28",+      "text": "RB7/PGD",+      "x": 5.825,+      "y": -8.255,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }   ],-  "pads_bbox_mm": [-   -5.675,-   5.675,-   -8.555,-   8.555-  ],-  "seating_z_mm": 0.001- },- "sources": {-  "glb": "pic16f872t-i-so-etched.glb",-  "glb_sha256": "5eea5fda06c9f3ec49760345d6676bbd5b7727ed7f13268fbc4f63550eb1826a",-  "footprint": "pic16f872t-i-so.kicad_mod",-  "footprint_sha256": "8df054b2353cacbe8e7228f97eacdd863eeebcfe7dc3a6315ee2deb370496519",-  "pins": "page.json component.pins",-  "pins_sha256": "0aa1b1d2fcf6d6c51577774ca3389d2bae2668cad33005fbc89f32faeb4ecda7"- },- "generator": "factory/hero_glb.py",- "labels": [-  {-   "pad": "1",-   "text": "MCLR/VPP",-   "x": -5.825,-   "y": -8.255,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "2",-   "text": "RA0/AN0",-   "x": -5.825,-   "y": -6.985,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "3",-   "text": "RA1/AN1",-   "x": -5.825,-   "y": -5.715,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "4",-   "text": "RA2/AN2/VREF-",-   "x": -5.825,-   "y": -4.445,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "5",-   "text": "RA3/AN3/VREF+",-   "x": -5.825,-   "y": -3.175,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "6",-   "text": "RA4/T0CKI",-   "x": -5.825,-   "y": -1.905,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "7",-   "text": "RA5/AN4/SS",-   "x": -5.825,-   "y": -0.635,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "8",-   "text": "VSS",-   "x": -5.825,-   "y": 0.635,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "9",-   "text": "OSC1/CLKI",-   "x": -5.825,-   "y": 1.905,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "10",-   "text": "OSC2/CLKO",-   "x": -5.825,-   "y": 3.175,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "11",-   "text": "RC0/T1OSO/T1CKI",-   "x": -5.825,-   "y": 4.445,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "12",-   "text": "RC1/T1OSI/CCP2",-   "x": -5.825,-   "y": 5.715,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "13",-   "text": "RC2/CCP1",-   "x": -5.825,-   "y": 6.985,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "14",-   "text": "RC3/SCK/SCL",-   "x": -5.825,-   "y": 8.255,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "15",-   "text": "RC4/SDI/SDA",-   "x": 5.825,-   "y": 8.255,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "16",-   "text": "RC5/SDO",-   "x": 5.825,-   "y": 6.985,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "17",-   "text": "RC6",-   "x": 5.825,-   "y": 5.715,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "18",-   "text": "RC7",-   "x": 5.825,-   "y": 4.445,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "19",-   "text": "VSS",-   "x": 5.825,-   "y": 3.175,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "20",-   "text": "VDD",-   "x": 5.825,-   "y": 1.905,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "21",-   "text": "RB0/INT",-   "x": 5.825,-   "y": 0.635,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "22",-   "text": "RB1",-   "x": 5.825,-   "y": -0.635,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "23",-   "text": "RB2",-   "x": 5.825,-   "y": -1.905,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "24",-   "text": "RB3/PGM",-   "x": 5.825,-   "y": -3.175,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "25",-   "text": "RB4",-   "x": 5.825,-   "y": -4.445,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "26",-   "text": "RB5",-   "x": 5.825,-   "y": -5.715,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "27",-   "text": "RB6/PGC",-   "x": 5.825,-   "y": -6.985,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "28",-   "text": "RB7/PGD",-   "x": 5.825,-   "y": -8.255,-   "align": "left",-   "vertical": false,-   "h": 0.6-  }- ],- "pads": [-  {-   "number": "1",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -8.255-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "2",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -6.985-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "3",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "4",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "5",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "6",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "7",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "8",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "9",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "10",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "11",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "12",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "13",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    6.985-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "14",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    8.255-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "15",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    8.255-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "16",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    6.985-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "17",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "18",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "19",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "20",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "21",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "22",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "23",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "24",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "25",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "26",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -5.715-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "27",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -6.985-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "28",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -8.255-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  }- ]-}\ No newline at end of file+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -8.255+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -6.985+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        6.985+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        8.255+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        8.255+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        6.985+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "26",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -5.715+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "27",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -6.985+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "28",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -8.255+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    }+  ]+}
pic16f872t-i-so.kicad_sym+1−1
@@ -53,7 +53,7 @@       (number "11" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at -20.32 -12.70 0) (length 5.08)-      (name "RC1/T1OSI/CCP2" (effects (font (size 1.27 1.27))))+      (name "RC1/T1OSI" (effects (font (size 1.27 1.27))))       (number "12" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at -20.32 -15.24 0) (length 5.08)
pic16f872t-i-so.lbr+16−5
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-28W_7.5x17.9mm_P1.27mm">   <description>SOIC-28W, 7.5 x 17.9 mm, 1.27 mm pitch. SOIC, 28 Pin</description>@@ -106,6 +106,7 @@ </packages> <symbols> <symbol name="PIC16F872T-I">+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-15.24" y1="17.78" x2="15.24" y2="17.78" width="0.254" layer="94"/>   <wire x1="15.24" y1="17.78" x2="15.24" y2="-20.32" width="0.254" layer="94"/>   <wire x1="15.24" y1="-20.32" x2="-15.24" y2="-20.32" width="0.254" layer="94"/>@@ -123,7 +124,7 @@   <pin name="OSC1/CLKI" x="-20.32" y="-5.08" length="middle" direction="in"/>   <pin name="OSC2/CLKO" x="-20.32" y="-7.62" length="middle" direction="out"/>   <pin name="RC0/T1OSO/T1CKI" x="-20.32" y="-10.16" length="middle" direction="io"/>-  <pin name="RC1/T1OSI/CCP2" x="-20.32" y="-12.7" length="middle" direction="io"/>+  <pin name="RC1/T1OSI" x="-20.32" y="-12.7" length="middle" direction="io"/>   <pin name="RC2/CCP1" x="-20.32" y="-15.24" length="middle" direction="io"/>   <pin name="RC3/SCK/SCL" x="-20.32" y="-17.78" length="middle" direction="io"/>   <pin name="RB7/PGD" x="20.32" y="15.24" length="middle" direction="io" rot="R180"/>@@ -144,7 +145,7 @@ </symbols> <devicesets> <deviceset name="PIC16F872T-I" prefix="U">-  <description></description>+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="PIC16F872T-I" x="0" y="0"/>   </gates>@@ -162,7 +163,7 @@         <connect gate="G$1" pin="OSC1/CLKI" pad="9"/>         <connect gate="G$1" pin="OSC2/CLKO" pad="10"/>         <connect gate="G$1" pin="RC0/T1OSO/T1CKI" pad="11"/>-        <connect gate="G$1" pin="RC1/T1OSI/CCP2" pad="12"/>+        <connect gate="G$1" pin="RC1/T1OSI" pad="12"/>         <connect gate="G$1" pin="RC2/CCP1" pad="13"/>         <connect gate="G$1" pin="RC3/SCK/SCL" pad="14"/>         <connect gate="G$1" pin="RB7/PGD" pad="28"/>@@ -180,7 +181,17 @@         <connect gate="G$1" pin="RC5/SDO" pad="16"/>         <connect gate="G$1" pin="RC4/SDI/SDA" pad="15"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="PIC16F872T-I/SO" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+          <attribute name="DATASHEET" value="https://ww1.microchip.com/downloads/en/DeviceDoc/30221c.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic16f872t-i-so" constant="no"/>+          <attribute name="MOUSER_PN" value="579-PIC16F872T-I/SO" constant="no"/>+          <attribute name="DIGIKEY_PN" value="PIC16F872T-I/SOTR-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C629736" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>