← Commit history
README.md+58−75
@@ -8,34 +8,34 @@ PIC16F870-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin description  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | MCLR/VPP/THV | input | Master Clear (Reset) input, programming voltage input, or High Voltage Test mode control; an active low RESET to the device. |-| 2 | RA0/AN0 | bidirectional | PORTA bi-directional I/O (TTL input); RA0 can also be analog input 0. |-| 3 | RA1/AN1 | bidirectional | PORTA bi-directional I/O (TTL input); RA1 can also be analog input 1. |-| 4 | RA2/AN2/VREF- | bidirectional | PORTA bi-directional I/O (TTL input); RA2 can also be analog input 2 or negative analog reference voltage. |-| 5 | RA3/AN3/VREF+ | bidirectional | PORTA bi-directional I/O (TTL input); RA3 can also be analog input 3 or positive analog reference voltage. |-| 6 | RA4/T0CKI | bidirectional | PORTA bi-directional I/O (Schmitt Trigger input); RA4 can also be the clock input to the Timer0 module, and its output is open drain type. |-| 7 | RA5/AN4 | bidirectional | PORTA bi-directional I/O (TTL input); RA5 can also be analog input 4. |+| 1 | MCLR/VPP/THV | input | Active-low Master Clear (Reset) input, which also serves as the programming voltage input or High Voltage Test mode control. |+| 2 | RA0/AN0 | bidirectional | PORTA bidirectional I/O with TTL input buffer; can also be analog input 0. |+| 3 | RA1/AN1 | bidirectional | PORTA bidirectional I/O with TTL input buffer; can also be analog input 1. |+| 4 | RA2/AN2/VREF- | bidirectional | PORTA bidirectional I/O with TTL input buffer; can also be analog input 2 or the negative analog reference voltage. |+| 5 | RA3/AN3/VREF+ | bidirectional | PORTA bidirectional I/O with TTL input buffer; can also be analog input 3 or the positive analog reference voltage. |+| 6 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O with Schmitt Trigger input and open-drain output; can also be the clock input to the Timer0 module. |+| 7 | RA5/AN4 | bidirectional | PORTA bidirectional I/O with TTL input buffer; can also be analog input 4. | | 8 | VSS | power_in | Ground reference for logic and I/O pins. | | 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS input otherwise). |-| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the frequency of OSC1, denoting the instruction cycle rate. |-| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bi-directional I/O (Schmitt Trigger input); RC0 can also be the Timer1 oscillator output or Timer1 clock input. |-| 12 | RC1/T1OSI | bidirectional | PORTC bi-directional I/O (Schmitt Trigger input); RC1 can also be the Timer1 oscillator input. |-| 13 | RC2/CCP1 | bidirectional | PORTC bi-directional I/O (Schmitt Trigger input); RC2 can also be the Capture1 input, Compare1 output, or PWM1 output. |-| 14 | RC3 | bidirectional | PORTC bi-directional I/O (Schmitt Trigger input) with no alternate function listed in the pinout table. |-| 15 | RC4 | bidirectional | PORTC bi-directional I/O (Schmitt Trigger input) with no alternate function listed in the pinout table. |-| 16 | RC5 | bidirectional | PORTC bi-directional I/O (Schmitt Trigger input) with no alternate function listed in the pinout table. |-| 17 | RC6/TX/CK | bidirectional | PORTC bi-directional I/O (Schmitt Trigger input); RC6 can also be the USART asynchronous transmit or synchronous clock. |-| 18 | RC7/RX/DT | bidirectional | PORTC bi-directional I/O (Schmitt Trigger input); RC7 can also be the USART asynchronous receive or synchronous data. |+| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |+| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator output or Timer1 clock input. |+| 12 | RC1/T1OSI | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator input. |+| 13 | RC2/CCP1 | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; can also be the Capture1 input, Compare1 output, or PWM1 output. |+| 14 | RC3 | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input. |+| 15 | RC4 | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input. |+| 16 | RC5 | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input. |+| 17 | RC6/TX/CK | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous transmit or synchronous clock. |+| 18 | RC7/RX/DT | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous receive or synchronous data. | | 19 | VSS | power_in | Ground reference for logic and I/O pins. | | 20 | VDD | power_in | Positive supply for logic and I/O pins. |-| 21 | RB0/INT | bidirectional | PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input when configured as external interrupt); RB0 can also be the external interrupt pin. |-| 22 | RB1 | bidirectional | PORTB bi-directional I/O with software-programmable weak pull-up (TTL input). |-| 23 | RB2 | bidirectional | PORTB bi-directional I/O with software-programmable weak pull-up (TTL input). |-| 24 | RB3/PGM | bidirectional | PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input when configured as LVP); RB3 can also be the low voltage programming input. |-| 25 | RB4 | bidirectional | PORTB bi-directional I/O with software-programmable weak pull-up (TTL input); interrupt-on-change pin. |-| 26 | RB5 | bidirectional | PORTB bi-directional I/O with software-programmable weak pull-up (TTL input); interrupt-on-change pin. |-| 27 | RB6/PGC | bidirectional | PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input in serial programming mode); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock. |-| 28 | RB7/PGD | bidirectional | PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input in serial programming mode); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data. |+| 21 | RB0/INT | bidirectional | PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when configured as external interrupt); can also be the external interrupt pin, with weak pull-up programmable. |+| 22 | RB1 | bidirectional | PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up. |+| 23 | RB2 | bidirectional | PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up. |+| 24 | RB3/PGM | bidirectional | PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when in LVP mode); can also be the low voltage programming input. |+| 25 | RB4 | bidirectional | PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin. |+| 26 | RB5 | bidirectional | PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin. |+| 27 | RB6/PGC | bidirectional | PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock. |+| 28 | RB7/PGD | bidirectional | PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data. |  ## Key specifications @@ -52,61 +52,44 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage (all configurations) | VDD | 4 |  | 5.5 | V | All configurations | 119 |-| Supply voltage for BOR enabled, FMAX = 14 MHz | VBOR |  |  | 5.5 | V | BOR enabled, FMAX = 14 MHz (Note 7), -40°C to +85°C | 119 |-| VDD rise rate to ensure internal Power-on Reset | SVDD | 0.05 |  |  | V/ms | See section on Power-on Reset | 119 |+| Ambient temperature under bias |  | -55 |  | 125 | °C |  | 117 |+| Storage temperature |  | -65 |  | 150 | °C |  | 117 |+| Voltage on any pin with respect to VSS |  | -0.3 |  |  | V | Except VDD, MCLR and RA4; upper limit printed as VDD + 0.3V | 117 |+| Voltage on VDD with respect to VSS | VDD | -0.3 |  | 7.5 | V |  | 117 |+| Voltage on MCLR with respect to VSS | MCLR | 0 |  | 13.25 | V |  | 117 |+| Voltage on RA4 with respect to VSS | RA4 | 0 |  | 8.5 | V |  | 117 |+| Total power dissipation | Pdis |  |  | 1 | W |  | 117 |+| Input clamp current | IIK |  |  | 20 | mA | VI < 0 or VI > VDD | 117 |+| Output clamp current | IOK |  |  | 20 | mA | VO < 0 or VO > VDD | 117 |+| Operating temperature (Industrial) | TA | -40 |  | 85 | °C | Industrial range | 119 |+| Supply voltage VDD | VDD | 4 |  | 5.5 | V | All configurations | 119 |+| Brown-out Reset voltage rising limit (BOR enabled) | VBOR |  |  | 5.5 | V | BOR enabled, FMAX = 14 MHz (Note 7), -40°C to +85°C | 119 |+| RAM data retention voltage | VDR |  | 1.5 |  | V |  | 119 |+| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 |  |  | V/ms | See section on Power-on Reset for details | 119 | | Brown-out Reset voltage | VBOR | 3.7 | 4 | 4.35 | V | BOREN bit in configuration word enabled | 119 |-| Supply current (XT, RC osc) | IDD |  | 1.6 | 4 | mA | XT, RC osc configuration, FOSC = 4 MHz, VDD = 5.5V (Note 4) | 120 |-| Supply current (HS osc) | IDD |  | 7 | 15 | mA | HS osc configuration, FOSC = 20 MHz, VDD = 5.5V, -40°C to +85°C | 120 |+| Supply current (XT, RC osc, 4 MHz) | IDD |  | 1.6 | 4 | mA | XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) | 120 |+| Supply current (HS osc, 20 MHz) | IDD |  | 7 | 15 | mA | HS osc configuration FOSC = 20 MHz, VDD = 5.5V, -40C to +85C | 120 | | Brown-out Reset current | IBOR |  | 85 | 200 | µA | BOR enabled, VDD = 5.0V | 120 |-| Power-down current (WDT enabled) | IPD |  | 10.5 | 42 | µA | VDD = 4.0V, WDT enabled, -40°C to +85°C | 120 |-| Power-down current (WDT disabled) | IPD |  | 1.5 | 19 | µA | VDD = 4.0V, WDT disabled, -40°C to +85°C | 120 |-| Input low voltage, TTL buffer | VIL |  |  | 0.8 | V | 4.5V <= VDD <= 5.5V | 121 |-| Input high voltage, TTL buffer | VIH | 2 |  |  | V | 4.5V <= VDD <= 5.5V | 121 |-| Input low voltage, SMBus (RC3, RC4) | VIL | -0.5 |  | 0.6 | V | For VDD = 4.5 to 5.5V | 121 |-| Input high voltage, SMBus (RC3, RC4) | VIH | 1.4 |  | 5.5 | V | For VDD = 4.5 to 5.5V | 121 |-| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 121 |-| Input leakage current, I/O ports | IIL |  |  | 1 | µA | Vss <= VPIN <= VDD, pin at hi-impedance | 121 |-| Input leakage current, MCLR, RA4/T0CKI | IIL |  |  | 5 | µA | Vss <= VPIN <= VDD | 121 |-| Input leakage current, OSC1 | IIL |  |  | 5 | µA | Vss <= VPIN <= VDD, XT, HS and LP osc configuration | 121 |-| Output low voltage, I/O ports | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 122 |-| Output low voltage, OSC2/CLKO (RC osc) | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 122 |-| Open drain high voltage, RA4 | VOD |  |  | 8.5 | V | RA4 pin | 122 |-| OSC2 pin capacitive loading | COSC2 |  |  | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 122 |-| I/O pin capacitive loading | CIO |  |  | 50 | pF | All I/O pins and OSC2 (in RC mode) | 122 |-| SCL, SDA bus capacitance (I2C mode) | CB |  |  | 400 | pF | SCL, SDA in I2C mode | 122 |-| VDD for read/write (EECON) | VDRW |  |  | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 |+| Power-down current (WDT enabled) | IPD |  | 10.5 | 42 | µA | VDD = 4.0V, WDT enabled, -40C to +85C | 120 |+| Power-down current (WDT disabled) | IPD |  | 1.5 | 19 | µA | VDD = 4.0V, WDT disabled, -40C to +85C | 120 |+| Input low voltage, I/O ports with TTL buffer (4.5V to 5.5V) | VIL |  |  | 0.8 | V | 4.5V <= VDD <= 5.5V | 122 |+| Input high voltage, I/O ports with TTL buffer | VIH | 2 |  |  | V | 4.5V <= VDD <= 5.5V | 122 |+| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 122 |+| Input leakage current, I/O ports | IIL |  |  | 1 | µA | Vss <= VPIN <= VDD, pin at hi-impedance | 122 |+| Input leakage current, MCLR and RA4/T0CKI | IIL |  |  | 5 | µA | Vss <= VPIN <= VDD | 122 |+| Input leakage current, OSC1 | IIL |  |  | 5 | µA | Vss <= VPIN <= VDD, XT, HS and LP osc configuration | 122 |+| Output low voltage, I/O ports | VOL |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 122 |+| Output low voltage, OSC2/CLKO (RC osc config) | VOL |  |  | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40C to +85C | 122 |+| Open drain high voltage, RA4 pin | VOD |  |  | 8.5 | V | RA4 pin | 122 |+| Capacitive loading, OSC2 pin | COSC2 |  |  | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 122 |+| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO |  |  | 50 | pF | All I/O pins and OSC2 (in RC mode) | 122 |+| Capacitive loading, SCL, SDA in I2C mode | CB |  |  | 400 | pF | SCL, SDA in I2C mode | 122 |+| VDD for read/write (data EEPROM) | VDRW |  |  | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 | | Data EEPROM erase/write cycle time | TDEW |  | 4 | 8 | ms |  | 122 |-| Program FLASH endurance | EP | 1000 |  |  | E/W | 25°C at 5V | 122 |+| Program FLASH endurance | EP | 1000 |  |  | E/W | 25C at 5V | 122 | | VDD for read (program FLASH) | VPR |  |  | 5.5 | V | VMIN = min operating voltage | 122 |-| VDD for erase/write (program FLASH) | VPEW |  |  | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 |+| VDD for erase/write (program FLASH) | VDD |  |  | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 | | Program FLASH erase/write cycle time | TPEW |  | 4 | 8 | ms |  | 122 |-| External CLKI frequency, RC osc mode | FOSC |  |  | 4 | MHz | RC Osc mode (DC minimum printed, not numeric) | 127 |-| Oscillator frequency, XT osc mode | FOSC | 0.1 |  | 4 | MHz | XT Osc mode | 127 |-| Oscillator frequency, HS osc mode | FOSC | 4 |  | 20 | MHz | HS Osc mode (speed grade suffix -04 / -20 not stated on this MPN, see review) | 127 |-| Oscillator frequency, LP osc mode | FOSC | 5 |  | 200 | kHz | LP Osc mode | 127 |-| External clock period, XT and RC osc | TOSC | 250 |  |  | ns | XT and RC Osc mode | 127 |-| External clock period, LP osc | TOSC | 5 |  |  | µs | LP Osc mode | 127 |-| External clock OSC1 high/low time, XT | TosL,TosH | 100 |  |  | ns | XT oscillator | 127 |-| External clock OSC1 high/low time, LP | TosL,TosH | 2.5 |  |  | µs | LP oscillator | 127 |-| External clock OSC1 rise/fall time, XT | TosR,TosF |  |  | 25 | ns | XT oscillator | 127 |-| External clock OSC1 rise/fall time, LP | TosR,TosF |  |  | 50 | ns | LP oscillator | 127 |-| OSC1 to CLKO delay (high-going) | TosH2ckL |  | 75 | 200 | ns | (Note 1) | 128 |-| OSC1 to CLKO delay (low-going) | TosH2ckH |  | 75 | 200 | ns | (Note 1) | 128 |-| CLKO rise time | TckR |  | 35 | 100 | ns | (Note 1) | 128 |-| CLKO fall time | TckF |  | 35 | 100 | ns | (Note 1) | 128 |-| OSC1 (Q1) to port out valid | TosH2ioV |  | 100 | 255 | ns |  | 128 |-| OSC1 (Q2) to port input invalid (I/O hold time) | TosH2ioI | 100 |  |  | ns | Standard (F) | 128 |-| Port output rise time | TIOR |  | 10 | 40 | ns | Standard (F) | 128 |-| Port output fall time | TIOF |  | 10 | 40 | ns | Standard (F) | 128 |-| Ambient temperature under bias | TA | -55 |  | 125 | °C |  | 117 |-| Storage temperature | TSTG | -65 |  | 150 | °C |  | 117 |-| Voltage on VDD with respect to VSS | VDD | -0.3 |  | 7.5 | V |  | 117 |-| Voltage on MCLR with respect to VSS | VMCLR | 0 |  | 13.25 | V | Note 2 | 117 |-| Voltage on RA4 with respect to VSS | VRA4 | 0 |  | 8.5 | V |  | 117 |-| Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) | VPIN | -0.3 |  |  | V | Maximum printed as (VDD + 0.3V), not numeric | 117 |-| Total power dissipation | Pdis |  |  | 1 | W | Note 1 | 117 |-| Operating temperature (Industrial) | TA | -40 |  | 85 | °C | Industrial range (-40°C <= TA <= +85°C) | 119 |  ## CAD (KiCad official) @@ -119,7 +102,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](docs/pic16f870-i-so-datasheet.pdf) (172 pp, sha256 `8de8debad34dd0ef`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30569C.pdf) (172 pp, sha256 `4c6d10498b8dc240`, retrieved 2026-11-12, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/pic16f870-i-so-datasheet.pdf
⋯ 1 unchanged line ⋯
package.json+38−40
@@ -1,6 +1,6 @@ {   "slug": "pic16f870-i-so",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic16f870-i-so-hero.glb",-    "pic16f870-i-so-hero.overlay.json",-    "pic16f870-i-so-etched.glb"+    "pic16f870-i-so-hero.overlay.json"   ],   "component": {     "mpn": "PIC16F870-I/SO",@@ -38,12 +37,12 @@     "pin_count": 28,     "category": "Single Chip Microcomputer/Microcontroller",     "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",-    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/29489fffd19e938e099379b1fc909a2b.pdf",+    "datasheet": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30569C.pdf",     "parts": {       "symbol": "pic16f870-i-so.kicad_sym",       "footprint": "pic16f870-i-so.kicad_mod",       "model_3d": "pic16f870-i-so-hero.glb",-      "model_3d_plain": "pic16f870-i-so-etched.glb",+      "model_3d_plain": "pic16f870-i-so.glb",       "model_3d_step": "pic16f870-i-so-etched.step",       "model_3d_step_plain": "pic16f870-i-so.step",       "lbr": "pic16f870-i-so.lbr"@@ -54,12 +53,11 @@       "mouser": "579-PIC16F870-I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T17:37:28Z",+      "checked_at": "2026-11-12T23:58:47Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16F870-I/SO-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "579-PIC16F870-I/SO",@@ -72,43 +70,43 @@         "number": "1",         "name": "MCLR/VPP/THV",         "type": "input",-        "description": "Master Clear (Reset) input, programming voltage input, or High Voltage Test mode control; an active low RESET to the device."+        "description": "Active-low Master Clear (Reset) input, which also serves as the programming voltage input or High Voltage Test mode control."       },       {         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (TTL input); RA0 can also be analog input 0."+        "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 0."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (TTL input); RA1 can also be analog input 1."+        "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 1."       },       {         "number": "4",         "name": "RA2/AN2/VREF-",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (TTL input); RA2 can also be analog input 2 or negative analog reference voltage."+        "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 2 or the negative analog reference voltage."       },       {         "number": "5",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (TTL input); RA3 can also be analog input 3 or positive analog reference voltage."+        "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 3 or the positive analog reference voltage."       },       {         "number": "6",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (Schmitt Trigger input); RA4 can also be the clock input to the Timer0 module, and its output is open drain type."+        "description": "PORTA bidirectional I/O with Schmitt Trigger input and open-drain output; can also be the clock input to the Timer0 module."       },       {         "number": "7",         "name": "RA5/AN4",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (TTL input); RA5 can also be analog input 4."+        "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 4."       },       {         "number": "8",@@ -126,55 +124,55 @@         "number": "10",         "name": "OSC2/CLKO",         "type": "output",-        "description": "Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the frequency of OSC1, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."       },       {         "number": "11",         "name": "RC0/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input); RC0 can also be the Timer1 oscillator output or Timer1 clock input."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator output or Timer1 clock input."       },       {         "number": "12",         "name": "RC1/T1OSI",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input); RC1 can also be the Timer1 oscillator input."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator input."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input); RC2 can also be the Capture1 input, Compare1 output, or PWM1 output."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Capture1 input, Compare1 output, or PWM1 output."       },       {         "number": "14",         "name": "RC3",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input) with no alternate function listed in the pinout table."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input."       },       {         "number": "15",         "name": "RC4",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input) with no alternate function listed in the pinout table."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input."       },       {         "number": "16",         "name": "RC5",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input) with no alternate function listed in the pinout table."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input."       },       {         "number": "17",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input); RC6 can also be the USART asynchronous transmit or synchronous clock."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous transmit or synchronous clock."       },       {         "number": "18",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input); RC7 can also be the USART asynchronous receive or synchronous data."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous receive or synchronous data."       },       {         "number": "19",@@ -192,49 +190,49 @@         "number": "21",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input when configured as external interrupt); RB0 can also be the external interrupt pin."+        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when configured as external interrupt); can also be the external interrupt pin, with weak pull-up programmable."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL input)."+        "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL input)."+        "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up."       },       {         "number": "24",         "name": "RB3/PGM",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input when configured as LVP); RB3 can also be the low voltage programming input."+        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when in LVP mode); can also be the low voltage programming input."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL input); interrupt-on-change pin."+        "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL input); interrupt-on-change pin."+        "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin."       },       {         "number": "27",         "name": "RB6/PGC",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input in serial programming mode); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock."+        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock."       },       {         "number": "28",         "name": "RB7/PGD",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input in serial programming mode); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data."+        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data."       }     ],     "provenance": {@@ -248,16 +246,16 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The SOIC-28 pin numbers come from the PIC16F870 pinout table (Table 1-1, page 7), which lists a SOIC; Pin descriptions are condensed from the table text and the datasheet does not state electrical limit"+          "extractor flagged: The OSC1/CLKI row in the Table 1-1 text extraction is garbled ('99' for the DIP and SOIC columns). R; The SOIC column in Table 1-1 gives the SOIC pin numbers for PIC16F870 and matches the 28-pin sequenc; The datasheet specifies only electrical limits in other sections, not in the pinout table. The pin d"         ],         "pages_sent": 24,-        "cost_usd": 0.1498,-        "at": "2026-11-12T17:37:06"+        "cost_usd": 0.1485,+        "at": "2026-11-12T23:58:30"       },       "datasheet": {-        "url": "https://datasheet.lcsc.com/datasheet/pdf/29489fffd19e938e099379b1fc909a2b.pdf",+        "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30569C.pdf",         "pages": 172,-        "sha256": "8de8debad34dd0ef",+        "sha256": "4c6d10498b8dc240",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",@@ -289,7 +287,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -307,8 +305,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "5118d17d2742885b65902d2fcebc1e3376b9a44610ea6a4aaa4bdad25365366b",-        "checked": "2026-11-12",+        "sha256": "0bb9f01c222a7022f14e9e028cadc2d5730c6a60ec73d329de08107cf246b59d",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+41−41
@@ -4,7 +4,7 @@   "slug": "pic16f870-i-so",   "title": "PIC16F870-I/SO",   "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -20,12 +20,12 @@     "pin_count": 28,     "category": "Single Chip Microcomputer/Microcontroller",     "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",-    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/29489fffd19e938e099379b1fc909a2b.pdf",+    "datasheet": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30569C.pdf",     "parts": {       "symbol": "pic16f870-i-so.kicad_sym",       "footprint": "pic16f870-i-so.kicad_mod",       "model_3d": "pic16f870-i-so-hero.glb",-      "model_3d_plain": "pic16f870-i-so-etched.glb",+      "model_3d_plain": "pic16f870-i-so.glb",       "model_3d_step": "pic16f870-i-so-etched.step",       "model_3d_step_plain": "pic16f870-i-so.step",       "lbr": "pic16f870-i-so.lbr"@@ -36,12 +36,11 @@       "mouser": "579-PIC16F870-I/SO"     },     "distributor_check": {-      "checked_at": "2026-11-12T17:37:28Z",+      "checked_at": "2026-11-12T23:58:47Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16F870-I/SO-ND",-        "status": "found",-        "lifecycle": "Active"+        "status": "found"       },       "mouser": {         "pn": "579-PIC16F870-I/SO",@@ -54,43 +53,43 @@         "number": "1",         "name": "MCLR/VPP/THV",         "type": "input",-        "description": "Master Clear (Reset) input, programming voltage input, or High Voltage Test mode control; an active low RESET to the device."+        "description": "Active-low Master Clear (Reset) input, which also serves as the programming voltage input or High Voltage Test mode control."       },       {         "number": "2",         "name": "RA0/AN0",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (TTL input); RA0 can also be analog input 0."+        "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 0."       },       {         "number": "3",         "name": "RA1/AN1",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (TTL input); RA1 can also be analog input 1."+        "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 1."       },       {         "number": "4",         "name": "RA2/AN2/VREF-",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (TTL input); RA2 can also be analog input 2 or negative analog reference voltage."+        "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 2 or the negative analog reference voltage."       },       {         "number": "5",         "name": "RA3/AN3/VREF+",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (TTL input); RA3 can also be analog input 3 or positive analog reference voltage."+        "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 3 or the positive analog reference voltage."       },       {         "number": "6",         "name": "RA4/T0CKI",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (Schmitt Trigger input); RA4 can also be the clock input to the Timer0 module, and its output is open drain type."+        "description": "PORTA bidirectional I/O with Schmitt Trigger input and open-drain output; can also be the clock input to the Timer0 module."       },       {         "number": "7",         "name": "RA5/AN4",         "type": "bidirectional",-        "description": "PORTA bi-directional I/O (TTL input); RA5 can also be analog input 4."+        "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 4."       },       {         "number": "8",@@ -108,55 +107,55 @@         "number": "10",         "name": "OSC2/CLKO",         "type": "output",-        "description": "Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the frequency of OSC1, denoting the instruction cycle rate."+        "description": "Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."       },       {         "number": "11",         "name": "RC0/T1OSO/T1CKI",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input); RC0 can also be the Timer1 oscillator output or Timer1 clock input."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator output or Timer1 clock input."       },       {         "number": "12",         "name": "RC1/T1OSI",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input); RC1 can also be the Timer1 oscillator input."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator input."       },       {         "number": "13",         "name": "RC2/CCP1",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input); RC2 can also be the Capture1 input, Compare1 output, or PWM1 output."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Capture1 input, Compare1 output, or PWM1 output."       },       {         "number": "14",         "name": "RC3",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input) with no alternate function listed in the pinout table."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input."       },       {         "number": "15",         "name": "RC4",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input) with no alternate function listed in the pinout table."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input."       },       {         "number": "16",         "name": "RC5",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input) with no alternate function listed in the pinout table."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input."       },       {         "number": "17",         "name": "RC6/TX/CK",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input); RC6 can also be the USART asynchronous transmit or synchronous clock."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous transmit or synchronous clock."       },       {         "number": "18",         "name": "RC7/RX/DT",         "type": "bidirectional",-        "description": "PORTC bi-directional I/O (Schmitt Trigger input); RC7 can also be the USART asynchronous receive or synchronous data."+        "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous receive or synchronous data."       },       {         "number": "19",@@ -174,49 +173,49 @@         "number": "21",         "name": "RB0/INT",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input when configured as external interrupt); RB0 can also be the external interrupt pin."+        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when configured as external interrupt); can also be the external interrupt pin, with weak pull-up programmable."       },       {         "number": "22",         "name": "RB1",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL input)."+        "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up."       },       {         "number": "23",         "name": "RB2",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL input)."+        "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up."       },       {         "number": "24",         "name": "RB3/PGM",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input when configured as LVP); RB3 can also be the low voltage programming input."+        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when in LVP mode); can also be the low voltage programming input."       },       {         "number": "25",         "name": "RB4",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL input); interrupt-on-change pin."+        "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin."       },       {         "number": "26",         "name": "RB5",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL input); interrupt-on-change pin."+        "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin."       },       {         "number": "27",         "name": "RB6/PGC",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input in serial programming mode); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock."+        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock."       },       {         "number": "28",         "name": "RB7/PGD",         "type": "bidirectional",-        "description": "PORTB bi-directional I/O with software-programmable weak pull-up (TTL/Schmitt Trigger input in serial programming mode); interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data."+        "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data."       }     ],     "provenance": {@@ -230,16 +229,16 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The SOIC-28 pin numbers come from the PIC16F870 pinout table (Table 1-1, page 7), which lists a SOIC; Pin descriptions are condensed from the table text and the datasheet does not state electrical limit"+          "extractor flagged: The OSC1/CLKI row in the Table 1-1 text extraction is garbled ('99' for the DIP and SOIC columns). R; The SOIC column in Table 1-1 gives the SOIC pin numbers for PIC16F870 and matches the 28-pin sequenc; The datasheet specifies only electrical limits in other sections, not in the pinout table. The pin d"         ],         "pages_sent": 24,-        "cost_usd": 0.1498,-        "at": "2026-11-12T17:37:06"+        "cost_usd": 0.1485,+        "at": "2026-11-12T23:58:30"       },       "datasheet": {-        "url": "https://datasheet.lcsc.com/datasheet/pdf/29489fffd19e938e099379b1fc909a2b.pdf",+        "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30569C.pdf",         "pages": 172,-        "sha256": "8de8debad34dd0ef",+        "sha256": "4c6d10498b8dc240",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",@@ -271,7 +270,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -289,8 +288,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "5118d17d2742885b65902d2fcebc1e3376b9a44610ea6a4aaa4bdad25365366b",-        "checked": "2026-11-12",+        "sha256": "0bb9f01c222a7022f14e9e028cadc2d5730c6a60ec73d329de08107cf246b59d",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -1052,10 +1051,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pic16f870-i-so-hero.glb",-    "pic16f870-i-so-hero.overlay.json",-    "pic16f870-i-so-etched.glb"+    "pic16f870-i-so-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic16f870-i-so.lbr+14−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-28W_7.5x17.9mm_P1.27mm">   <description>SOIC-28W, 7.5 x 17.9 mm, 1.27 mm pitch. SOIC, 28 Pin</description>@@ -106,6 +106,7 @@ </packages> <symbols> <symbol name="PIC16F870-I">+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-17.78" y1="17.78" x2="17.78" y2="17.78" width="0.254" layer="94"/>   <wire x1="17.78" y1="17.78" x2="17.78" y2="-20.32" width="0.254" layer="94"/>   <wire x1="17.78" y1="-20.32" x2="-17.78" y2="-20.32" width="0.254" layer="94"/>@@ -144,7 +145,7 @@ </symbols> <devicesets> <deviceset name="PIC16F870-I" prefix="U">-  <description></description>+  <description>Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="PIC16F870-I" x="0" y="0"/>   </gates>@@ -180,7 +181,17 @@         <connect gate="G$1" pin="RC5" pad="16"/>         <connect gate="G$1" pin="RC4" pad="15"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="PIC16F870-I/SO" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+          <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/29489fffd19e938e099379b1fc909a2b.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic16f870-i-so" constant="no"/>+          <attribute name="MOUSER_PN" value="579-PIC16F870-I/SO" constant="no"/>+          <attribute name="DIGIKEY_PN" value="PIC16F870-I/SO-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C185590" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>