← Commit history
Publish 0.1.2
4 files changed
+130−116
README.md+64−52@@ -8,34 +8,34 @@ PIC16F870-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin description | Pin | Name | Type | Function | |---|---|---|---|-| 1 | MCLR/VPP/THV | input | Active-low Master Clear (Reset) input, which also serves as the programming voltage input or High Voltage Test mode control. |-| 2 | RA0/AN0 | bidirectional | PORTA bidirectional I/O with TTL input buffer; can also be analog input 0. |-| 3 | RA1/AN1 | bidirectional | PORTA bidirectional I/O with TTL input buffer; can also be analog input 1. |-| 4 | RA2/AN2/VREF- | bidirectional | PORTA bidirectional I/O with TTL input buffer; can also be analog input 2 or the negative analog reference voltage. |-| 5 | RA3/AN3/VREF+ | bidirectional | PORTA bidirectional I/O with TTL input buffer; can also be analog input 3 or the positive analog reference voltage. |-| 6 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O with Schmitt Trigger input and open-drain output; can also be the clock input to the Timer0 module. |-| 7 | RA5/AN4 | bidirectional | PORTA bidirectional I/O with TTL input buffer; can also be analog input 4. |+| 1 | MCLR/VPP/THV | input | Active-low Master Clear (Reset) input, also the programming voltage input or High Voltage Test mode control, with a Schmitt Trigger input buffer. |+| 2 | RA0/AN0 | bidirectional | PORTA bidirectional I/O with TTL input buffer; RA0 can also be analog input 0. |+| 3 | RA1/AN1 | bidirectional | PORTA bidirectional I/O with TTL input buffer; RA1 can also be analog input 1. |+| 4 | RA2/AN2/VREF- | bidirectional | PORTA bidirectional I/O with TTL input buffer; RA2 can also be analog input 2 or the negative analog reference voltage. |+| 5 | RA3/AN3/VREF+ | bidirectional | PORTA bidirectional I/O with TTL input buffer; RA3 can also be analog input 3 or the positive analog reference voltage. |+| 6 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O with Schmitt Trigger input; RA4 can also be the clock input to Timer0, and its output is open drain type. |+| 7 | RA5/AN4 | bidirectional | PORTA bidirectional I/O with TTL input buffer; RA5 can also be analog input 4. | | 8 | VSS | power_in | Ground reference for logic and I/O pins. |-| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS input otherwise). |-| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |-| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator output or Timer1 clock input. |-| 12 | RC1/T1OSI | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator input. |-| 13 | RC2/CCP1 | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; can also be the Capture1 input, Compare1 output, or PWM1 output. |-| 14 | RC3 | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input. |-| 15 | RC4 | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input. |-| 16 | RC5 | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input. |-| 17 | RC6/TX/CK | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous transmit or synchronous clock. |-| 18 | RC7/RX/DT | bidirectional | PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous receive or synchronous data. |+| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input. |+| 10 | OSC2/CLKO | output | Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |+| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bidirectional Schmitt Trigger I/O; RC0 can also be the Timer1 oscillator output or Timer1 clock input. |+| 12 | RC1/T1OSI | bidirectional | PORTC bidirectional Schmitt Trigger I/O; RC1 can also be the Timer1 oscillator input. |+| 13 | RC2/CCP1 | bidirectional | PORTC bidirectional Schmitt Trigger I/O; RC2 can also be the Capture1 input, Compare1 output or PWM1 output. |+| 14 | RC3 | bidirectional | PORTC bidirectional Schmitt Trigger I/O with no alternate function listed in the pinout table. |+| 15 | RC4 | bidirectional | PORTC bidirectional Schmitt Trigger I/O with no alternate function listed in the pinout table. |+| 16 | RC5 | bidirectional | PORTC bidirectional Schmitt Trigger I/O with no alternate function listed in the pinout table. |+| 17 | RC6/TX/CK | bidirectional | PORTC bidirectional Schmitt Trigger I/O; RC6 can also be the USART asynchronous transmit or synchronous clock. |+| 18 | RC7/RX/DT | bidirectional | PORTC bidirectional Schmitt Trigger I/O; RC7 can also be the USART asynchronous receive or synchronous data. | | 19 | VSS | power_in | Ground reference for logic and I/O pins. | | 20 | VDD | power_in | Positive supply for logic and I/O pins. |-| 21 | RB0/INT | bidirectional | PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when configured as external interrupt); can also be the external interrupt pin, with weak pull-up programmable. |+| 21 | RB0/INT | bidirectional | PORTB bidirectional I/O with internal weak pull-up option; RB0 can also be the external interrupt pin, with a Schmitt Trigger input when configured as the interrupt or in LVP mode. | | 22 | RB1 | bidirectional | PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up. | | 23 | RB2 | bidirectional | PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up. |-| 24 | RB3/PGM | bidirectional | PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when in LVP mode); can also be the low voltage programming input. |-| 25 | RB4 | bidirectional | PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin. |-| 26 | RB5 | bidirectional | PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin. |-| 27 | RB6/PGC | bidirectional | PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock. |-| 28 | RB7/PGD | bidirectional | PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data. |+| 24 | RB3/PGM | bidirectional | PORTB bidirectional I/O with internal weak pull-up option; RB3 can also be the low voltage programming input, with a Schmitt Trigger input when configured for LVP. |+| 25 | RB4 | bidirectional | PORTB bidirectional I/O with TTL input buffer and software-programmable weak pull-up; interrupt-on-change pin. |+| 26 | RB5 | bidirectional | PORTB bidirectional I/O with TTL input buffer and software-programmable weak pull-up; interrupt-on-change pin. |+| 27 | RB6/PGC | bidirectional | PORTB bidirectional I/O with software-programmable weak pull-up; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock with Schmitt Trigger input in serial programming mode. |+| 28 | RB7/PGD | bidirectional | PORTB bidirectional I/O with software-programmable weak pull-up; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data with Schmitt Trigger input in serial programming mode. | ## Key specifications @@ -54,42 +54,54 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries |---|---|---|---|---|---|---|---| | Ambient temperature under bias | | -55 | | 125 | °C | | 117 | | Storage temperature | | -65 | | 150 | °C | | 117 |-| Voltage on any pin with respect to VSS | | -0.3 | | | V | Except VDD, MCLR and RA4; upper limit printed as VDD + 0.3V | 117 |-| Voltage on VDD with respect to VSS | VDD | -0.3 | | 7.5 | V | | 117 |-| Voltage on MCLR with respect to VSS | MCLR | 0 | | 13.25 | V | | 117 |-| Voltage on RA4 with respect to VSS | RA4 | 0 | | 8.5 | V | | 117 |-| Total power dissipation | Pdis | | | 1 | W | | 117 |+| Voltage on any pin with respect to VSS (except VDD, MCLR and RA4) | | -0.3 | | | V | Printed maximum is (VDD + 0.3V); expression, not numeric | 117 |+| Voltage on VDD with respect to VSS | | -0.3 | | 7.5 | V | | 117 |+| Voltage on MCLR with respect to VSS | | 0 | | 13.25 | V | | 117 |+| Voltage on RA4 with respect to VSS | | 0 | | 8.5 | V | | 117 |+| Total power dissipation | | | | 1 | W | | 117 | | Input clamp current | IIK | | | 20 | mA | VI < 0 or VI > VDD | 117 | | Output clamp current | IOK | | | 20 | mA | VO < 0 or VO > VDD | 117 |-| Operating temperature (Industrial) | TA | -40 | | 85 | °C | Industrial range | 119 |-| Supply voltage VDD | VDD | 4 | | 5.5 | V | All configurations | 119 |-| Brown-out Reset voltage rising limit (BOR enabled) | VBOR | | | 5.5 | V | BOR enabled, FMAX = 14 MHz (Note 7), -40°C to +85°C | 119 |-| RAM data retention voltage | VDR | | 1.5 | | V | | 119 |+| Supply voltage VDD (PIC16F870/871) | VDD | 4 | | 5.5 | V | All configurations | 119 |+| Brown-out Reset voltage (FMAX = 14 MHz) | VBOR | | | 5.5 | V | BOR enabled, FMAX = 14 MHz (Note 7), -40°C to +85°C | 119 | | VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | See section on Power-on Reset for details | 119 | | Brown-out Reset voltage | VBOR | 3.7 | 4 | 4.35 | V | BOREN bit in configuration word enabled | 119 |-| Supply current (XT, RC osc, 4 MHz) | IDD | | 1.6 | 4 | mA | XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) | 120 |-| Supply current (HS osc, 20 MHz) | IDD | | 7 | 15 | mA | HS osc configuration FOSC = 20 MHz, VDD = 5.5V, -40C to +85C | 120 |+| Supply current IDD (XT, RC osc) | IDD | | 1.6 | 4 | mA | XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) | 120 |+| Supply current IDD (HS osc, 20 MHz) | IDD | | 7 | 15 | mA | HS osc configuration FOSC = 20 MHz, VDD = 5.5V, -40°C to +85°C | 120 | | Brown-out Reset current | IBOR | | 85 | 200 | µA | BOR enabled, VDD = 5.0V | 120 |-| Power-down current (WDT enabled) | IPD | | 10.5 | 42 | µA | VDD = 4.0V, WDT enabled, -40C to +85C | 120 |-| Power-down current (WDT disabled) | IPD | | 1.5 | 19 | µA | VDD = 4.0V, WDT disabled, -40C to +85C | 120 |-| Input low voltage, I/O ports with TTL buffer (4.5V to 5.5V) | VIL | | | 0.8 | V | 4.5V <= VDD <= 5.5V | 122 |-| Input high voltage, I/O ports with TTL buffer | VIH | 2 | | | V | 4.5V <= VDD <= 5.5V | 122 |-| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 122 |-| Input leakage current, I/O ports | IIL | | | 1 | µA | Vss <= VPIN <= VDD, pin at hi-impedance | 122 |-| Input leakage current, MCLR and RA4/T0CKI | IIL | | | 5 | µA | Vss <= VPIN <= VDD | 122 |-| Input leakage current, OSC1 | IIL | | | 5 | µA | Vss <= VPIN <= VDD, XT, HS and LP osc configuration | 122 |-| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 122 |-| Output low voltage, OSC2/CLKO (RC osc config) | VOL | | | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40C to +85C | 122 |+| Power-down current IPD (WDT enabled) | IPD | | 10.5 | 42 | µA | VDD = 4.0V, WDT enabled, -40°C to +85°C | 120 |+| Power-down current IPD (WDT disabled) | IPD | | 1.5 | 19 | µA | VDD = 4.0V, WDT disabled, -40°C to +85°C | 120 |+| Brown-out Reset current (second listing) | IBOR | | 85 | 200 | µA | BOR enabled, VDD = 5.0V | 120 |+| Input low voltage, I/O ports with TTL buffer | VIL | | | 0.8 | V | 4.5V <= VDD <= 5.5V | 121 |+| Input low voltage, RC3 and RC4 with SMBus | VIL | -0.5 | | 0.6 | V | For VDD = 4.5 to 5.5V | 121 |+| Input high voltage, I/O ports with TTL buffer | VIH | 2 | | | V | 4.5V <= VDD <= 5.5V | 121 |+| Input high voltage, RC3 and RC4 with SMBus | VIH | 1.4 | | 5.5 | V | For VDD = 4.5 to 5.5V | 121 |+| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 121 |+| Input leakage current, I/O ports | IIL | | | 1 | µA | VSS <= VPIN <= VDD, pin at hi-impedance | 121 |+| Input leakage current, MCLR and RA4/T0CKI | IIL | | | 5 | µA | VSS <= VPIN <= VDD | 121 |+| Input leakage current, OSC1 | IIL | | | 5 | µA | VSS <= VPIN <= VDD, XT, HS and LP osc configuration | 121 |+| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 122 |+| Output low voltage, OSC2/CLKO (RC osc) | VOL | | | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 122 | | Open drain high voltage, RA4 pin | VOD | | | 8.5 | V | RA4 pin | 122 |-| Capacitive loading, OSC2 pin | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 122 |-| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | | | 50 | pF | All I/O pins and OSC2 (in RC mode) | 122 |-| Capacitive loading, SCL, SDA in I2C mode | CB | | | 400 | pF | SCL, SDA in I2C mode | 122 |-| VDD for read/write (data EEPROM) | VDRW | | | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 |+| OSC2 pin capacitive loading | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 122 |+| All I/O pins and OSC2 (RC mode) capacitive loading | CIO | | | 50 | pF | | 122 |+| SCL, SDA capacitive loading (I2C mode) | CB | | | 400 | pF | I2C mode | 122 |+| VDD for data EEPROM read/write | VDRW | | | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 | | Data EEPROM erase/write cycle time | TDEW | | 4 | 8 | ms | | 122 |-| Program FLASH endurance | EP | 1000 | | | E/W | 25C at 5V | 122 |-| VDD for read (program FLASH) | VPR | | | 5.5 | V | VMIN = min operating voltage | 122 |-| VDD for erase/write (program FLASH) | VDD | | | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 |+| Program FLASH endurance | EP | 1000 | | | E/W | 25°C at 5V | 122 |+| VDD for program FLASH read | VPR | | | 5.5 | V | VMIN = min operating voltage | 122 |+| VDD for program FLASH erase/write | | | | 5.5 | V | Using EECON to read/write, VMIN = min operating voltage | 122 | | Program FLASH erase/write cycle time | TPEW | | 4 | 8 | ms | | 122 |+| External CLKI frequency, XT and RC osc mode | FOSC | | | 4 | MHz | XT and RC Osc mode | 127 |+| External CLKI frequency, HS osc mode (-20) | FOSC | | | 20 | MHz | HS Osc mode (-20) | 127 |+| External CLKI frequency, LP osc mode | FOSC | | | 200 | kHz | LP Osc mode | 127 |+| Oscillator frequency, XT osc mode | FOSC | 0.1 | | 4 | MHz | XT Osc mode | 127 |+| Oscillator frequency, HS osc mode | FOSC | 4 | | 20 | MHz | HS Osc mode | 127 |+| Oscillator frequency, LP osc mode | FOSC | 5 | | 200 | kHz | LP Osc mode | 127 |+| Instruction cycle time | TCY | 200 | | | ns | TCY = 4/FOSC | 127 |+| OSC1 (Q1 cycle) to port out valid | TosH2ioV | | 100 | 255 | ns | | 128 |+| OSC1 (Q2 cycle) to port input invalid (I/O in hold time) | TosH2ioI | 100 | | | ns | Standard (F) part | 128 |+| Port output rise time | TIOR | | | 40 | ns | Standard (F) part | 128 |+| Port output fall time | TIOF | | | 40 | ns | Standard (F) part | 128 | ## CAD (KiCad official) @@ -102,7 +114,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30569C.pdf) (172 pp, sha256 `4c6d10498b8dc240`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30569C.pdf) (172 pp, sha256 `4c6d10498b8dc240`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+31−31@@ -1,6 +1,6 @@ { "slug": "pic16f870-i-so",- "version": "0.1.1",+ "version": "0.1.2", "type": "component", "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "579-PIC16F870-I/SO" }, "distributor_check": {- "checked_at": "2026-11-12T23:58:47Z",+ "checked_at": "2026-11-17T18:13:24Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PIC16F870-I/SO-ND",@@ -70,43 +70,43 @@ "number": "1", "name": "MCLR/VPP/THV", "type": "input",- "description": "Active-low Master Clear (Reset) input, which also serves as the programming voltage input or High Voltage Test mode control."+ "description": "Active-low Master Clear (Reset) input, also the programming voltage input or High Voltage Test mode control, with a Schmitt Trigger input buffer." }, { "number": "2", "name": "RA0/AN0", "type": "bidirectional",- "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 0."+ "description": "PORTA bidirectional I/O with TTL input buffer; RA0 can also be analog input 0." }, { "number": "3", "name": "RA1/AN1", "type": "bidirectional",- "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 1."+ "description": "PORTA bidirectional I/O with TTL input buffer; RA1 can also be analog input 1." }, { "number": "4", "name": "RA2/AN2/VREF-", "type": "bidirectional",- "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 2 or the negative analog reference voltage."+ "description": "PORTA bidirectional I/O with TTL input buffer; RA2 can also be analog input 2 or the negative analog reference voltage." }, { "number": "5", "name": "RA3/AN3/VREF+", "type": "bidirectional",- "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 3 or the positive analog reference voltage."+ "description": "PORTA bidirectional I/O with TTL input buffer; RA3 can also be analog input 3 or the positive analog reference voltage." }, { "number": "6", "name": "RA4/T0CKI", "type": "bidirectional",- "description": "PORTA bidirectional I/O with Schmitt Trigger input and open-drain output; can also be the clock input to the Timer0 module."+ "description": "PORTA bidirectional I/O with Schmitt Trigger input; RA4 can also be the clock input to Timer0, and its output is open drain type." }, { "number": "7", "name": "RA5/AN4", "type": "bidirectional",- "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 4."+ "description": "PORTA bidirectional I/O with TTL input buffer; RA5 can also be analog input 4." }, { "number": "8",@@ -118,61 +118,61 @@ "number": "9", "name": "OSC1/CLKI", "type": "input",- "description": "Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS input otherwise)."+ "description": "Oscillator crystal input or external clock source input." }, { "number": "10", "name": "OSC2/CLKO", "type": "output",- "description": "Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+ "description": "Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate." }, { "number": "11", "name": "RC0/T1OSO/T1CKI", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator output or Timer1 clock input."+ "description": "PORTC bidirectional Schmitt Trigger I/O; RC0 can also be the Timer1 oscillator output or Timer1 clock input." }, { "number": "12", "name": "RC1/T1OSI", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator input."+ "description": "PORTC bidirectional Schmitt Trigger I/O; RC1 can also be the Timer1 oscillator input." }, { "number": "13", "name": "RC2/CCP1", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Capture1 input, Compare1 output, or PWM1 output."+ "description": "PORTC bidirectional Schmitt Trigger I/O; RC2 can also be the Capture1 input, Compare1 output or PWM1 output." }, { "number": "14", "name": "RC3", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input."+ "description": "PORTC bidirectional Schmitt Trigger I/O with no alternate function listed in the pinout table." }, { "number": "15", "name": "RC4", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input."+ "description": "PORTC bidirectional Schmitt Trigger I/O with no alternate function listed in the pinout table." }, { "number": "16", "name": "RC5", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input."+ "description": "PORTC bidirectional Schmitt Trigger I/O with no alternate function listed in the pinout table." }, { "number": "17", "name": "RC6/TX/CK", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous transmit or synchronous clock."+ "description": "PORTC bidirectional Schmitt Trigger I/O; RC6 can also be the USART asynchronous transmit or synchronous clock." }, { "number": "18", "name": "RC7/RX/DT", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous receive or synchronous data."+ "description": "PORTC bidirectional Schmitt Trigger I/O; RC7 can also be the USART asynchronous receive or synchronous data." }, { "number": "19",@@ -190,7 +190,7 @@ "number": "21", "name": "RB0/INT", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when configured as external interrupt); can also be the external interrupt pin, with weak pull-up programmable."+ "description": "PORTB bidirectional I/O with internal weak pull-up option; RB0 can also be the external interrupt pin, with a Schmitt Trigger input when configured as the interrupt or in LVP mode." }, { "number": "22",@@ -208,31 +208,31 @@ "number": "24", "name": "RB3/PGM", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when in LVP mode); can also be the low voltage programming input."+ "description": "PORTB bidirectional I/O with internal weak pull-up option; RB3 can also be the low voltage programming input, with a Schmitt Trigger input when configured for LVP." }, { "number": "25", "name": "RB4", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin."+ "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable weak pull-up; interrupt-on-change pin." }, { "number": "26", "name": "RB5", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin."+ "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable weak pull-up; interrupt-on-change pin." }, { "number": "27", "name": "RB6/PGC", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock."+ "description": "PORTB bidirectional I/O with software-programmable weak pull-up; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock with Schmitt Trigger input in serial programming mode." }, { "number": "28", "name": "RB7/PGD", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data."+ "description": "PORTB bidirectional I/O with software-programmable weak pull-up; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data with Schmitt Trigger input in serial programming mode." } ], "provenance": {@@ -246,11 +246,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The OSC1/CLKI row in the Table 1-1 text extraction is garbled ('99' for the DIP and SOIC columns). R; The SOIC column in Table 1-1 gives the SOIC pin numbers for PIC16F870 and matches the 28-pin sequenc; The datasheet specifies only electrical limits in other sections, not in the pinout table. The pin d"+ "extractor flagged: The schema has no field for electrical specs, so the headline ratings (e.g., 2.0 V to 5.5 V operatin; Pin numbers are taken from Table 1-1 (PIC16F870 pinout, page 7), where the SOIC column matches the D" ], "pages_sent": 24,- "cost_usd": 0.1485,- "at": "2026-11-12T23:58:30"+ "cost_usd": 0.1475,+ "at": "2026-11-17T18:12:53" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30569C.pdf",@@ -287,7 +287,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -305,8 +305,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "0bb9f01c222a7022f14e9e028cadc2d5730c6a60ec73d329de08107cf246b59d",- "checked": "2026-11-13",+ "sha256": "d98ae494f462aba72c30922e4159ebb91af18450e378ab3b8b5e871e4c9e7ef7",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+34−32@@ -4,7 +4,7 @@ "slug": "pic16f870-i-so", "title": "PIC16F870-I/SO", "brief": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.1",+ "version": "0.1.2", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "579-PIC16F870-I/SO" }, "distributor_check": {- "checked_at": "2026-11-12T23:58:47Z",+ "checked_at": "2026-11-17T18:13:24Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PIC16F870-I/SO-ND",@@ -53,43 +53,43 @@ "number": "1", "name": "MCLR/VPP/THV", "type": "input",- "description": "Active-low Master Clear (Reset) input, which also serves as the programming voltage input or High Voltage Test mode control."+ "description": "Active-low Master Clear (Reset) input, also the programming voltage input or High Voltage Test mode control, with a Schmitt Trigger input buffer." }, { "number": "2", "name": "RA0/AN0", "type": "bidirectional",- "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 0."+ "description": "PORTA bidirectional I/O with TTL input buffer; RA0 can also be analog input 0." }, { "number": "3", "name": "RA1/AN1", "type": "bidirectional",- "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 1."+ "description": "PORTA bidirectional I/O with TTL input buffer; RA1 can also be analog input 1." }, { "number": "4", "name": "RA2/AN2/VREF-", "type": "bidirectional",- "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 2 or the negative analog reference voltage."+ "description": "PORTA bidirectional I/O with TTL input buffer; RA2 can also be analog input 2 or the negative analog reference voltage." }, { "number": "5", "name": "RA3/AN3/VREF+", "type": "bidirectional",- "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 3 or the positive analog reference voltage."+ "description": "PORTA bidirectional I/O with TTL input buffer; RA3 can also be analog input 3 or the positive analog reference voltage." }, { "number": "6", "name": "RA4/T0CKI", "type": "bidirectional",- "description": "PORTA bidirectional I/O with Schmitt Trigger input and open-drain output; can also be the clock input to the Timer0 module."+ "description": "PORTA bidirectional I/O with Schmitt Trigger input; RA4 can also be the clock input to Timer0, and its output is open drain type." }, { "number": "7", "name": "RA5/AN4", "type": "bidirectional",- "description": "PORTA bidirectional I/O with TTL input buffer; can also be analog input 4."+ "description": "PORTA bidirectional I/O with TTL input buffer; RA5 can also be analog input 4." }, { "number": "8",@@ -101,61 +101,61 @@ "number": "9", "name": "OSC1/CLKI", "type": "input",- "description": "Oscillator crystal input or external clock source input (Schmitt Trigger in RC mode, CMOS input otherwise)."+ "description": "Oscillator crystal input or external clock source input." }, { "number": "10", "name": "OSC2/CLKO", "type": "output",- "description": "Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate."+ "description": "Oscillator crystal output connecting to crystal or resonator in Crystal Oscillator mode; in RC mode it outputs CLKO at 1/4 the OSC1 frequency, denoting the instruction cycle rate." }, { "number": "11", "name": "RC0/T1OSO/T1CKI", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator output or Timer1 clock input."+ "description": "PORTC bidirectional Schmitt Trigger I/O; RC0 can also be the Timer1 oscillator output or Timer1 clock input." }, { "number": "12", "name": "RC1/T1OSI", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Timer1 oscillator input."+ "description": "PORTC bidirectional Schmitt Trigger I/O; RC1 can also be the Timer1 oscillator input." }, { "number": "13", "name": "RC2/CCP1", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the Capture1 input, Compare1 output, or PWM1 output."+ "description": "PORTC bidirectional Schmitt Trigger I/O; RC2 can also be the Capture1 input, Compare1 output or PWM1 output." }, { "number": "14", "name": "RC3", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input."+ "description": "PORTC bidirectional Schmitt Trigger I/O with no alternate function listed in the pinout table." }, { "number": "15", "name": "RC4", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input."+ "description": "PORTC bidirectional Schmitt Trigger I/O with no alternate function listed in the pinout table." }, { "number": "16", "name": "RC5", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input."+ "description": "PORTC bidirectional Schmitt Trigger I/O with no alternate function listed in the pinout table." }, { "number": "17", "name": "RC6/TX/CK", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous transmit or synchronous clock."+ "description": "PORTC bidirectional Schmitt Trigger I/O; RC6 can also be the USART asynchronous transmit or synchronous clock." }, { "number": "18", "name": "RC7/RX/DT", "type": "bidirectional",- "description": "PORTC bidirectional I/O with Schmitt Trigger input; can also be the USART asynchronous receive or synchronous data."+ "description": "PORTC bidirectional Schmitt Trigger I/O; RC7 can also be the USART asynchronous receive or synchronous data." }, { "number": "19",@@ -173,7 +173,7 @@ "number": "21", "name": "RB0/INT", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when configured as external interrupt); can also be the external interrupt pin, with weak pull-up programmable."+ "description": "PORTB bidirectional I/O with internal weak pull-up option; RB0 can also be the external interrupt pin, with a Schmitt Trigger input when configured as the interrupt or in LVP mode." }, { "number": "22",@@ -191,31 +191,31 @@ "number": "24", "name": "RB3/PGM", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input (Schmitt Trigger when in LVP mode); can also be the low voltage programming input."+ "description": "PORTB bidirectional I/O with internal weak pull-up option; RB3 can also be the low voltage programming input, with a Schmitt Trigger input when configured for LVP." }, { "number": "25", "name": "RB4", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin."+ "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable weak pull-up; interrupt-on-change pin." }, { "number": "26", "name": "RB5", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable internal weak pull-up; interrupt-on-change pin."+ "description": "PORTB bidirectional I/O with TTL input buffer and software-programmable weak pull-up; interrupt-on-change pin." }, { "number": "27", "name": "RB6/PGC", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock."+ "description": "PORTB bidirectional I/O with software-programmable weak pull-up; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming clock with Schmitt Trigger input in serial programming mode." }, { "number": "28", "name": "RB7/PGD", "type": "bidirectional",- "description": "PORTB bidirectional I/O with TTL/Schmitt Trigger input; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data."+ "description": "PORTB bidirectional I/O with software-programmable weak pull-up; interrupt-on-change pin or In-Circuit Debugger pin, and serial programming data with Schmitt Trigger input in serial programming mode." } ], "provenance": {@@ -229,11 +229,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The OSC1/CLKI row in the Table 1-1 text extraction is garbled ('99' for the DIP and SOIC columns). R; The SOIC column in Table 1-1 gives the SOIC pin numbers for PIC16F870 and matches the 28-pin sequenc; The datasheet specifies only electrical limits in other sections, not in the pinout table. The pin d"+ "extractor flagged: The schema has no field for electrical specs, so the headline ratings (e.g., 2.0 V to 5.5 V operatin; Pin numbers are taken from Table 1-1 (PIC16F870 pinout, page 7), where the SOIC column matches the D" ], "pages_sent": 24,- "cost_usd": 0.1485,- "at": "2026-11-12T23:58:30"+ "cost_usd": 0.1475,+ "at": "2026-11-17T18:12:53" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30569C.pdf",@@ -270,7 +270,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -288,8 +288,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "0bb9f01c222a7022f14e9e028cadc2d5730c6a60ec73d329de08107cf246b59d",- "checked": "2026-11-13",+ "sha256": "d98ae494f462aba72c30922e4159ebb91af18450e378ab3b8b5e871e4c9e7ef7",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -851,5 +851,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
pic16f870-i-so.lbr+1−1@@ -185,7 +185,7 @@ <technology name=""> <attribute name="MPN" value="PIC16F870-I/SO" constant="no"/> <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>- <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/29489fffd19e938e099379b1fc909a2b.pdf" constant="no"/>+ <attribute name="DATASHEET" value="https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30569C.pdf" constant="no"/> <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/pic16f870-i-so" constant="no"/> <attribute name="MOUSER_PN" value="579-PIC16F870-I/SO" constant="no"/> <attribute name="DIGIKEY_PN" value="PIC16F870-I/SO-ND" constant="no"/>