← Commit history

Initial commit: component/pic16f1933-i

Ray ·94e6d34306 ·
2 files changed +328
README.mdadded+65
@@ -0,0 +1,65 @@+# PIC16F1933-I++**Microchip Tech** · Microcontrollers (MCU/MPU/SOC) · SSOP-28-208mil++PIC16F1933-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VPP/MCLR/RE3 | input | Active-low master-clear reset input multiplexed with RE3 input-only I/O and VPP programming-voltage input; internal weak pull-up selectable in software; RE3 is the device's sole input-only pin per the 25 I/O count on page 2. |+| 2 | RA0 | bidirectional | Bidirectional general-purpose I/O pin RA0 with high source/sink current sufficient to drive LEDs directly, programmable weak pull-up, and interrupt-on-change; multiplexed with a 10-bit ADC analog input channel and mTouch capacitive-sensing channel. |+| 3 | RA1 | bidirectional | Bidirectional general-purpose I/O pin RA1 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with a 10-bit ADC analog input channel and mTouch capacitive-sensing channel. |+| 4 | RA2 | bidirectional | Bidirectional general-purpose I/O pin RA2 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with ADC analog input, DAC output (DAC1OUT), and negative voltage reference (VREF−). |+| 5 | RA3 | bidirectional | Bidirectional general-purpose I/O pin RA3 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with ADC analog input and positive voltage reference (VREF+); reference options include 1.024 V, 2.048 V, and 4.096 V per FVR module. |+| 6 | RA4 | bidirectional | Bidirectional general-purpose I/O pin RA4 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with Timer0 external clock input (T0CKI), Comparator 1 output (C1OUT), and SR latch output. |+| 7 | RA5 | bidirectional | Bidirectional general-purpose I/O pin RA5 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with ADC analog input, Comparator 2 output (C2OUT), and Timer1 clock input (T1CKI). |+| 8 | VSS | power_in | Ground reference for logic and I/O; first of two VSS pins on the 28-pin SSOP package. |+| 9 | RA7 | bidirectional | Bidirectional general-purpose I/O pin RA7 with high source/sink current; multiplexed with external oscillator input (OSC1/CLKIN) accepting DC to 32 MHz per device clock specification on page 1. |+| 10 | RA6 | bidirectional | Bidirectional general-purpose I/O pin RA6 with high source/sink current; multiplexed with oscillator output (OSC2/CLKOUT) for crystal feedback or clock output. |+| 11 | RC0 | bidirectional | Bidirectional general-purpose I/O pin RC0 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with the Timer1 low-power 32 kHz oscillator output (T1OSO/SOSCO) and Timer1 clock input. |+| 12 | RC1 | bidirectional | Bidirectional general-purpose I/O pin RC1 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with the Timer1 32 kHz oscillator input (T1OSI/SOSCI). |+| 13 | RC2 | bidirectional | Bidirectional general-purpose I/O pin RC2 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with CCP1 capture/compare/PWM (16-bit capture, max 125 ns resolution; 10-bit PWM up to 31.25 kHz). |+| 14 | RC3 | bidirectional | Bidirectional general-purpose I/O pin RC3 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with MSSP serial clock as SPI clock (SCK) or I2C clock (SCL) with 7-bit address masking and SMBus/PMBus compatibility. |+| 15 | RC4 | bidirectional | Bidirectional general-purpose I/O pin RC4 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with MSSP SPI data input (SDI) and I2C data (SDA); supports auto wake-up on start bit. |+| 16 | RC5 | bidirectional | Bidirectional general-purpose I/O pin RC5 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with MSSP SPI data output (SDO) and an ECCP PWM output channel. |+| 17 | RC6 | bidirectional | Bidirectional general-purpose I/O pin RC6 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with EUSART transmit (TX/CK); EUSART is compatible with RS-232, RS-485, and LIN with automatic baud-rate detection. |+| 18 | RC7 | bidirectional | Bidirectional general-purpose I/O pin RC7 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with EUSART receive (RX/DT); EUSART is compatible with RS-232, RS-485, and LIN. |+| 19 | VSS | power_in | Ground reference for logic and I/O; second VSS pin on the 28-pin SSOP package. |+| 20 | VDD | power_in | Positive power supply; 1.8 V to 5.5 V for PIC16F1933 or 1.8 V to 3.6 V for PIC16LF1933 per page 1. |+| 21 | RB0 | bidirectional | Bidirectional general-purpose I/O pin RB0 with high source/sink current to drive LEDs, individual programmable weak pull-up, and interrupt-on-change; multiplexed with external interrupt (INT) and an ECCP/CCP PWM channel. |+| 22 | RB1 | bidirectional | Bidirectional general-purpose I/O pin RB1 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with ECCP PWM output and an ADC analog input channel. |+| 23 | RB2 | bidirectional | Bidirectional general-purpose I/O pin RB2 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with an ECCP PWM half-bridge output and an ADC analog input channel. |+| 24 | RB3 | bidirectional | Bidirectional general-purpose I/O pin RB3 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with an ECCP full-bridge PWM output and an ADC analog input channel. |+| 25 | RB4 | bidirectional | Bidirectional general-purpose I/O pin RB4 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with an ECCP PWM output and SR latch output (SRQ). |+| 26 | RB5 | bidirectional | Bidirectional general-purpose I/O pin RB5 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with a CCP/ECCP PWM output, Timer1 gate input (T1G), and SR latch enable (SRQE). |+| 27 | RB6/ICSPCLK | bidirectional | Bidirectional general-purpose I/O pin RB6 with individual programmable weak pull-up and interrupt-on-change; serves as In-Circuit Serial Programming clock (ICSPCLK) during ICSP programming. |+| 28 | RB7/ICSPDAT | bidirectional | Bidirectional general-purpose I/O pin RB7 with individual programmable weak pull-up and interrupt-on-change; serves as In-Circuit Serial Programming data (ICSPDAT) during ICSP programming. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | SSOP-28-208mil |+| Category | Embedded Processors & Controllers |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `PIC16F1933-I`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)+- 3D model files: `pic16f1933-i-etched.step` / `pic16f1933-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f1933-i.step` / `pic16f1933-i.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882180252839936) (464 pp, sha256 `bb8a1b7608e25714`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pic16f1933-i-datasheet.pdf)
page.jsonadded+263
@@ -0,0 +1,263 @@+{+  "slug": "pic16f1933-i",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip Tech Microcontrollers (MCU/MPU/SOC), SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "pic16f1933-i",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pic16f1933-i.kicad_sym",+    "pic16f1933-i.kicad_mod",+    "pic16f1933-i.glb",+    "pic16f1933-i.step",+    "pic16f1933-i.lbr",+    "docs/hero.png",+    "docs/pic16f1933-i-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "PIC16F1933-I",+    "manufacturer": "Microchip Tech",+    "package": "SSOP-28-208mil",+    "pin_count": 28,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882180252839936",+    "parts": {+      "symbol": "pic16f1933-i.kicad_sym",+      "footprint": "pic16f1933-i.kicad_mod",+      "model_3d": "pic16f1933-i-etched.glb",+      "model_3d_plain": "pic16f1933-i.glb",+      "model_3d_step": "pic16f1933-i-etched.step",+      "model_3d_step_plain": "pic16f1933-i.step",+      "lbr": "pic16f1933-i.lbr"+    },+    "distributor_links": {+      "lcsc": "C88376"+    },+    "pins": [+      {+        "number": "1",+        "name": "VPP/MCLR/RE3",+        "type": "input",+        "description": "Active-low master-clear reset input multiplexed with RE3 input-only I/O and VPP programming-voltage input; internal weak pull-up selectable in software; RE3 is the device's sole input-only pin per the 25 I/O count on page 2."+      },+      {+        "number": "2",+        "name": "RA0",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RA0 with high source/sink current sufficient to drive LEDs directly, programmable weak pull-up, and interrupt-on-change; multiplexed with a 10-bit ADC analog input channel and mTouch capacitive-sensing channel."+      },+      {+        "number": "3",+        "name": "RA1",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RA1 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with a 10-bit ADC analog input channel and mTouch capacitive-sensing channel."+      },+      {+        "number": "4",+        "name": "RA2",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RA2 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with ADC analog input, DAC output (DAC1OUT), and negative voltage reference (VREF−)."+      },+      {+        "number": "5",+        "name": "RA3",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RA3 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with ADC analog input and positive voltage reference (VREF+); reference options include 1.024 V, 2.048 V, and 4.096 V per FVR module."+      },+      {+        "number": "6",+        "name": "RA4",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RA4 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with Timer0 external clock input (T0CKI), Comparator 1 output (C1OUT), and SR latch output."+      },+      {+        "number": "7",+        "name": "RA5",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RA5 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with ADC analog input, Comparator 2 output (C2OUT), and Timer1 clock input (T1CKI)."+      },+      {+        "number": "8",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference for logic and I/O; first of two VSS pins on the 28-pin SSOP package."+      },+      {+        "number": "9",+        "name": "RA7",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RA7 with high source/sink current; multiplexed with external oscillator input (OSC1/CLKIN) accepting DC to 32 MHz per device clock specification on page 1."+      },+      {+        "number": "10",+        "name": "RA6",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RA6 with high source/sink current; multiplexed with oscillator output (OSC2/CLKOUT) for crystal feedback or clock output."+      },+      {+        "number": "11",+        "name": "RC0",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RC0 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with the Timer1 low-power 32 kHz oscillator output (T1OSO/SOSCO) and Timer1 clock input."+      },+      {+        "number": "12",+        "name": "RC1",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RC1 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with the Timer1 32 kHz oscillator input (T1OSI/SOSCI)."+      },+      {+        "number": "13",+        "name": "RC2",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RC2 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with CCP1 capture/compare/PWM (16-bit capture, max 125 ns resolution; 10-bit PWM up to 31.25 kHz)."+      },+      {+        "number": "14",+        "name": "RC3",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RC3 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with MSSP serial clock as SPI clock (SCK) or I2C clock (SCL) with 7-bit address masking and SMBus/PMBus compatibility."+      },+      {+        "number": "15",+        "name": "RC4",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RC4 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with MSSP SPI data input (SDI) and I2C data (SDA); supports auto wake-up on start bit."+      },+      {+        "number": "16",+        "name": "RC5",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RC5 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with MSSP SPI data output (SDO) and an ECCP PWM output channel."+      },+      {+        "number": "17",+        "name": "RC6",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RC6 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with EUSART transmit (TX/CK); EUSART is compatible with RS-232, RS-485, and LIN with automatic baud-rate detection."+      },+      {+        "number": "18",+        "name": "RC7",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RC7 with high source/sink current, programmable weak pull-up, and interrupt-on-change; multiplexed with EUSART receive (RX/DT); EUSART is compatible with RS-232, RS-485, and LIN."+      },+      {+        "number": "19",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference for logic and I/O; second VSS pin on the 28-pin SSOP package."+      },+      {+        "number": "20",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive power supply; 1.8 V to 5.5 V for PIC16F1933 or 1.8 V to 3.6 V for PIC16LF1933 per page 1."+      },+      {+        "number": "21",+        "name": "RB0",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RB0 with high source/sink current to drive LEDs, individual programmable weak pull-up, and interrupt-on-change; multiplexed with external interrupt (INT) and an ECCP/CCP PWM channel."+      },+      {+        "number": "22",+        "name": "RB1",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RB1 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with ECCP PWM output and an ADC analog input channel."+      },+      {+        "number": "23",+        "name": "RB2",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RB2 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with an ECCP PWM half-bridge output and an ADC analog input channel."+      },+      {+        "number": "24",+        "name": "RB3",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RB3 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with an ECCP full-bridge PWM output and an ADC analog input channel."+      },+      {+        "number": "25",+        "name": "RB4",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RB4 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with an ECCP PWM output and SR latch output (SRQ)."+      },+      {+        "number": "26",+        "name": "RB5",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RB5 with high source/sink current, individual programmable weak pull-up, and interrupt-on-change; multiplexed with a CCP/ECCP PWM output, Timer1 gate input (T1G), and SR latch enable (SRQE)."+      },+      {+        "number": "27",+        "name": "RB6/ICSPCLK",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RB6 with individual programmable weak pull-up and interrupt-on-change; serves as In-Circuit Serial Programming clock (ICSPCLK) during ICSP programming."+      },+      {+        "number": "28",+        "name": "RB7/ICSPDAT",+        "type": "bidirectional",+        "description": "Bidirectional general-purpose I/O pin RB7 with individual programmable weak pull-up and interrupt-on-change; serves as In-Circuit Serial Programming data (ICSPDAT) during ICSP programming."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: LCD controller function assignment: Datasheet specifies integrated LCD controller with up to 96 segm; Input-only pin identification: Datasheet states one pin is input-only (page 2) but does not identify; ADC channel assignment: Datasheet mentions 11 ADC channels available but does not map specific chann"+        ],+        "pages_sent": 6,+        "cost_usd": 1.0981,+        "at": "2026-09-22T11:14:55"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882180252839936",+        "pages": 464,+        "sha256": "bb8a1b7608e25714",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file