← Commit history
README.md+60−53
@@ -8,26 +8,26 @@ PIC16F18446T-I from Microchip Tech, in a UQFN-20-EP(4x4). Pinout and pin descrip  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | RA3/MCLR/VPP | input | Input-only pin that acts as the active-low Master Clear (MCLR) input when MCLRE is enabled and as the VPP high-voltage programming pin; when enabled, MCLR is connected to VDD through an internal weak pull-up. |-| 2 | RC5 | bidirectional | General-purpose bidirectional I/O with analog input ANC5 and default peripheral inputs MDCARH, T4IN and CCP1IN, which can be remapped with PPS; interrupt-on-change is supported. |-| 3 | RC4 | bidirectional | General-purpose bidirectional I/O with analog input ANC4; interrupt-on-change is supported and the pin can be used as a digital output or peripheral input. |-| 4 | RC3 | bidirectional | General-purpose bidirectional I/O with analog input ANC3, comparator inputs C1IN3- and C2IN3-, and default CCP2IN and CLCIN1 peripheral inputs; interrupt-on-change is supported. |-| 5 | RC6 | bidirectional | General-purpose bidirectional I/O with analog input ANC6 and default SS1 peripheral input; interrupt-on-change is supported. |-| 6 | RC7 | bidirectional | General-purpose bidirectional I/O with analog input ANC7; interrupt-on-change is supported. |-| 7 | RB7 | bidirectional | General-purpose bidirectional I/O with analog input ANB7 and default SCK2/SCL2, CK1 and T6IN peripheral inputs; SCL2 uses I2C logic levels and interrupt-on-change is supported. |-| 8 | RB6 | bidirectional | General-purpose bidirectional I/O with analog input ANB6 and default SCK1/SCL1 clock input; the pin uses I2C logic levels for SCL1 and supports interrupt-on-change. |-| 9 | RB5 | bidirectional | General-purpose bidirectional I/O with analog input ANB5 and default SDI2/SDA2, RX1/DT1, CCP3IN and CLCIN3 peripheral inputs; interrupt-on-change is supported. |-| 10 | RB4 | bidirectional | General-purpose bidirectional I/O with analog input ANB4 and default SDI1/SDA1, T5G and CLCIN2 peripheral inputs; the pin uses I2C logic levels for SDA1 and supports interrupt-on-change. |-| 11 | RC2 | bidirectional | General-purpose bidirectional I/O with analog input ANC2, ADC auto-conversion trigger input ADACT, comparator inputs C1IN2- and C2IN2-, and default MDCARL and T5CKI inputs; interrupt-on-change is supported. |-| 12 | RC1 | bidirectional | General-purpose bidirectional I/O with analog input ANC1 and comparator inputs C1IN1- and C2IN1-; interrupt-on-change is supported. |-| 13 | RC0 | bidirectional | General-purpose bidirectional I/O with analog input ANC0 and comparator input C2IN0+, plus default T3CKI and T3G timer inputs; interrupt-on-change is supported. |-| 14 | RA2 | bidirectional | General-purpose bidirectional I/O with analog input ANA2, ADC negative reference ADCVREF-, DAC1VREF- reference input, default T0CKI and CWG1IN/CWG2IN inputs, and external interrupt INT; interrupt-on-change and weak pull-up are supported. |-| 15 | RA1/ICSPCLK | bidirectional | General-purpose bidirectional I/O with analog input ANA1, ADC positive reference ADCVREF+, comparator input C1IN0-/C2IN0- and DAC1VREF+ reference; it is also the ICD/ICSP clock pin (ICSPCLK) and supports interrupt-on-change and weak pull-up. |-| 16 | RA0/ICSPDAT | bidirectional | General-purpose bidirectional I/O with analog input ANA0, comparator input C1IN0+ and DAC1OUT1 output; it is also the ICD/ICSP data pin (ICSPDAT) and supports interrupt-on-change and weak pull-up. |-| 17 | VSS | power_in | Ground reference for the device logic and I/O pins. |-| 18 | VDD | power_in | Positive supply pin; the PIC16F184XX operating voltage range is 2.3V to 5.5V. |-| 19 | RA5/CLKIN/OSC1 | bidirectional | General-purpose bidirectional I/O with analog input ANA5 and default T1CKI, T2IN and SMT1SIG inputs; it doubles as the external clock input CLKIN or the oscillator input OSC1/SOSCI, and supports interrupt-on-change and weak pull-up. |-| 20 | RA4/CLKOUT/OSC2 | bidirectional | General-purpose bidirectional I/O with analog input ANA4 and default T1G, SMT1WIN and CCP4IN inputs; it doubles as CLKOUT or the oscillator output OSC2/SOSCO, and supports interrupt-on-change and weak pull-up. |+| 1 | RA3/MCLR/VPP | input | Input-only pin that functions as the Master Clear (MCLR) reset input when MCLRE is enabled and as the high-voltage programming pin VPP during HV programming. |+| 2 | RC5 | bidirectional | PORTC bit 5 that also provides analog input ANC5, MDCARH, Timer4 input T4IN and CCP1 input CCP1IN, with interrupt-on-change support. |+| 3 | RC4 | bidirectional | PORTC bit 4 that provides analog input ANC4 and interrupt-on-change support. |+| 4 | RC3 | bidirectional | PORTC bit 3 that provides analog input ANC3, comparator inputs C1IN3- and C2IN3-, CCP2 input CCP2IN and CLC input CLCIN1. |+| 5 | RC6 | bidirectional | PORTC bit 6 that provides analog input ANC6, MSSP slave select SS1 and interrupt-on-change support. |+| 6 | RC7 | bidirectional | PORTC bit 7 that provides analog input ANC7 and interrupt-on-change support. |+| 7 | RB7 | bidirectional | PORTB bit 7 that provides analog input ANB7, Timer6 input T6IN, SPI/I2C clock SCK2/SCL2 and EUSART clock CK1. |+| 8 | RB6 | bidirectional | PORTB bit 6 that provides analog input ANB6 and MSSP1 clock SCK1/SCL1 with interrupt-on-change support. |+| 9 | RB5 | bidirectional | PORTB bit 5 that provides analog input ANB5, CCP3 input CCP3IN, MSSP2 data SDI2/SDA2, EUSART receive RX1/DT1 and CLC input CLCIN3. |+| 10 | RB4 | bidirectional | PORTB bit 4 that provides analog input ANB4, Timer5 gate T5G, MSSP1 data SDI1/SDA1 and CLC input CLCIN2. |+| 11 | RC2 | bidirectional | PORTC bit 2 that provides analog input ANC2, ADC auto-conversion trigger ADACT, comparator inputs C1IN2- and C2IN2-, MDCARL and Timer5 clock T5CKI. |+| 12 | RC1 | bidirectional | PORTC bit 1 that provides analog input ANC1 and comparator inputs C1IN1- and C2IN1-. |+| 13 | RC0 | bidirectional | PORTC bit 0 that provides analog input ANC0, comparator input C2IN0+, Timer3 clock T3CKI and Timer3 gate T3G. |+| 14 | RA2 | bidirectional | PORTA bit 2 that provides analog input ANA2, ADC negative reference ADCVREF-, DAC1 negative reference DAC1VREF-, Timer0 clock T0CKI, CWG inputs, ZCD1 and external interrupt INT. |+| 15 | RA1 | bidirectional | PORTA bit 1 that provides analog input ANA1, ADC positive reference ADCVREF+, comparator inputs C1IN0- and C2IN0-, DAC1 positive reference DAC1VREF+ and ICD/ICSP clock ICDCLK/ICSPCLK. |+| 16 | RA0 | bidirectional | PORTA bit 0 that provides analog input ANA0, comparator input C1IN0+, DAC1OUT1 output and ICD/ICSP data ICDDAT/ICSPDAT. |+| 17 | VSS | power_in | Device ground supply pin; the datasheet recommends connecting the exposed bottom pad to VSS. |+| 18 | VDD | power_in | Positive device supply pin, to be decoupled to VSS with capacitors placed as close to the pins as possible. |+| 19 | RA5/CLKIN/OSC1 | bidirectional | PORTA bit 5 that provides analog input ANA5, Timer1 clock T1CKI, Timer2 input T2IN, SMT1 signal SMT1SIG and the external clock/oscillator input CLKIN/SOSCI/OSC1. |+| 20 | RA4/CLKOUT/OSC2 | bidirectional | PORTA bit 4 that provides analog input ANA4, Timer1 gate T1G, SMT1 window SMT1WIN, CCP4 input CCP4IN and the clock output/oscillator pin CLKOUT/SOSCO/OSC2. | | 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |  ## Key specifications@@ -45,51 +45,58 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Ambient temperature under bias |  | -40 |  | 125 | °C |  | 629 |-| Storage temperature |  | -65 |  | 150 | °C |  | 629 |-| Voltage on VDD pin with respect to VSS | VDD | -0.3 |  | 6.5 | V | PIC16F18426/46 (5.5V part) | 629 |+| Voltage on VDD pin with respect to VSS | VDD | -0.3 |  | 6.5 | V | PIC16F18426/46 (non-LF) device | 629 | | Voltage on MCLR pin with respect to VSS |  | -0.3 |  | 9 | V |  | 629 |-| Voltage on all other pins with respect to VSS (max = VDD + 0.3V) |  | -0.3 |  |  | V |  | 629 |+| Voltage on all other pins with respect to VSS |  | -0.3 |  |  | V | max = VDD + 0.3 V (expression as printed) | 629 | | Maximum current on VSS pin |  |  |  | 250 | mA | -40°C ≤ TA ≤ +85°C | 629 | | Maximum current on VSS pin |  |  |  | 120 | mA | 85°C < TA ≤ +125°C | 629 | | Maximum current on VDD pin |  |  |  | 250 | mA | -40°C ≤ TA ≤ +85°C | 629 | | Maximum current on VDD pin |  |  |  | 85 | mA | 85°C < TA ≤ +125°C | 629 |-| Maximum current on any standard I/O pin |  | -50 |  | 50 | mA |  | 629 |+| Maximum current on any standard I/O pin |  | -50 |  | 50 | mA | printed ±50 mA | 629 | | Clamp current | IK | -20 |  | 20 | mA | VPIN < 0 or VPIN > VDD | 629 | | Total power dissipation |  |  |  | 800 | mW |  | 629 |-| VDD operating supply voltage | VDD | 2.3 |  | 5.5 | V | FOSC ≤ 16 MHz | 632 |-| VDD operating supply voltage | VDD | 2.5 |  | 5.5 | V | FOSC > 16 MHz | 632 |-| Operating ambient temperature range, industrial (-I) | TA | -40 |  | 85 | °C | Industrial temperature | 630 |+| Operating supply voltage VDD | VDD | 2.3 |  | 5.5 | V | FOSC ≤ 16 MHz | 632 |+| Operating supply voltage VDD | VDD | 2.5 |  | 5.5 | V | FOSC > 16 MHz | 632 | | RAM data retention voltage | VDR | 1.7 |  |  | V | Device in Sleep mode | 632 | | VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 |  |  | V/ms | BOR or LPBOR disabled | 632 |-| Supply current, XT oscillator | IDDXT4 |  | 515 | 710 | μA | XT = 4 MHz, 3.0V | 634 |-| Supply current, HFINTOSC | IDDHFO16 |  | 2.2 | 2.7 | mA | HFINTOSC = 16 MHz, 3.0V | 634 |-| Supply current, HFINTOSC with PLL | IDDHFOPLL |  | 4 | 4.9 | mA | HFINTOSC = 32 MHz, 3.0V | 634 |-| Supply current, HS with PLL | IDDHSPLL32 |  | 3.7 | 4.5 | mA | HS+PLL = 32 MHz, 3.0V | 634 |-| Supply current, IDLE mode | IDDIDLE |  | 1.6 | 2 | mA | IDLE mode, HFINTOSC = 16 MHz, 3.0V | 634 |-| Power-down current, IPD base | IPD |  | 0.4 | 2.5 | μA | VDD 3.0V, VREGPM = 1, max at +85°C | 636 |-| Power-down current, IPD base | IPD |  | 18 | 25 | μA | VDD 3.0V, VREGPM = 0, max at +85°C | 636 |-| Power-down current, LFINTOSC/WDT | IPD_WDT |  | 1 | 2.9 | μA | VDD 3.0V, max at +85°C | 636 |-| Power-down current, secondary oscillator (SOSC) | IPD_SOSC |  | 1.2 | 4.3 | μA | VDD 3.0V, max at +85°C | 636 |-| Power-down current, FVR | IPD_FVR |  | 40 | 69 | μA | VDD 3.0V, max at +85°C | 636 |-| Power-down current, BOR | IPD_BOR |  | 11 | 16 | μA | VDD 3.0V, max at +85°C | 636 |-| Power-down current, ADC non-converting | IPD_ADCA |  | 0.38 | 2.5 | μA | VDD 3.0V, ADC not converting, max at +85°C | 636 |-| Power-down current, comparator | IPD_CMP |  | 31 | 58 | μA | VDD 3.0V, max at +85°C | 636 |-| Input low voltage, I/O port with TTL buffer | VIL |  |  | 0.8 | V | 4.5V≤VDD≤5.5V | 637 |-| Input low voltage, I/O port with SMBus levels | VIL |  |  | 0.8 | V | 2.7V≤VDD≤5.5V | 637 |-| Input high voltage, I/O port with TTL buffer | VIH | 2 |  |  | V | 4.5V≤VDD≤5.5V | 637 |-| Input high voltage, I/O port with SMBus levels | VIH | 2.1 |  |  | V | 2.7V≤VDD≤5.5V | 637 |-| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 85°C | 637 |-| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 85°C | 637 |-| Weak pull-up current | IPUR | 25 | 120 | 200 | μA | VDD=3.0V, VPIN=VSS | 637 |+| Supply current, XT = 4 MHz | IDDXT4 |  | 515 | 710 | µA | XT = 4 MHz; VDD 3.0V | 634 |+| Supply current, HFINTOSC = 16 MHz | IDDHFO16 |  | 2.2 | 2.7 | mA | HFINTOSC = 16 MHz; VDD 3.0V | 634 |+| Supply current, HFINTOSC = 32 MHz PLL | IDDHFOPLL |  | 4 | 4.9 | mA | HFINTOSC = 32 MHz; VDD 3.0V | 634 |+| Supply current, HS + PLL = 32 MHz | IDDHSPLL32 |  | 3.7 | 4.5 | mA | HS+PLL = 32 MHz; VDD 3.0V | 634 |+| Supply current, IDLE mode | IDDIDLE |  | 1.6 | 2 | mA | IDLE mode, HFINTOSC = 16 MHz; VDD 3.0V | 634 |+| Power-down current, IPD base | IPD |  | 0.4 | 2.5 | µA | VREGPM = 1; VDD 3.0V; max at +125°C = 8 µA | 636 |+| Power-down current, IPD base (VREGPM = 0) | IPD |  | 18 | 25 | µA | VREGPM = 0; VDD 3.0V; max at +125°C = 30 µA | 636 |+| Power-down current, Low-Frequency Internal Oscillator/WDT | IPD_WDT |  | 1 | 2.9 | µA | VDD 3.0V; max at +125°C = 9 µA | 636 |+| Power-down current, Secondary Oscillator (SOSC) | IPD_SOSC |  | 1.2 | 4.3 | µA | VDD 3.0V; max at +125°C = 9.2 µA | 636 |+| Power-down current, FVR | IPD_FVR |  | 40 | 69 | µA | VDD 3.0V; max at +125°C = 70 µA | 636 |+| Power-down current, Brown-out Reset (BOR) | IPD_BOR |  | 11 | 16 | µA | VDD 3.0V; max at +125°C = 19 µA | 636 |+| Power-down current, ADC non-converting | IPD_ADCA |  | 0.38 | 2.5 | µA | VDD 3.0V; ADC not converting; max at +125°C = 8.0 µA | 636 |+| Power-down current, Comparator | IPD_CMP |  | 31 | 58 | µA | VDD 3.0V; max at +125°C = 59 µA | 636 |+| Input low voltage, I/O port with TTL buffer | VIL |  |  | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 637 |+| Input low voltage, I/O port with SMBus levels | VIL |  |  | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 637 |+| Input high voltage, I/O port with TTL buffer | VIH | 2 |  |  | V | 4.5V ≤ VDD ≤ 5.5V | 637 |+| Input high voltage, I/O port with SMBus levels | VIH | 2.1 |  |  | V | 2.7V ≤ VDD ≤ 5.5V | 637 |+| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 637 |+| Input leakage current, I/O ports | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 125°C | 637 |+| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 637 |+| Weak pull-up current | IPUR | 25 | 120 | 200 | µA | VDD = 3.0V, VPIN = VSS | 637 | | Output low voltage, standard I/O ports | VOL |  |  | 0.6 | V | IOL = 10 mA, VDD = 3.0V | 637 | | Pin capacitance, all I/O pins | CIO |  | 5 | 50 | pF |  | 637 |+| ECL oscillator clock frequency | FECL |  |  | 500 | kHz |  | 641 |+| ECM oscillator clock frequency | FECM |  |  | 4 | MHz |  | 641 |+| ECH oscillator clock frequency | FECH |  |  | 32 | MHz |  | 641 |+| LP oscillator clock frequency | FLP |  |  | 100 | kHz | Note 4 (crystal or resonator required) | 641 |+| XT oscillator clock frequency | FXT |  |  | 4 | MHz | Note 4 (crystal or resonator required) | 641 |+| HS oscillator clock frequency | FHS |  |  | 20 | MHz | Note 4 (crystal or resonator required) | 641 |+| Secondary oscillator clock frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Note 4 | 641 |+| System clock frequency | FOSC |  |  | 32 | MHz | Note 2, Note 3 | 641 |+| Instruction period | TCY | 125 |  |  | ns |  | 642 |+| PLL input frequency range | FPLLIN | 4 |  | 16 | MHz |  | 643 |+| PLL output frequency range | FPLLOUT | 16 |  | 32 | MHz | Note 1 (must meet FOSC requirement) | 643 | | Voltage on MCLR/VPP pin to enter programming mode | VIHH | 8 |  | 9 | V | Note 2, Note 3 | 638 | | Supply current during programming operation | IDDPGM |  |  | 10 | mA |  | 638 |-| Byte erase and write cycle time | TD_BEW |  | 4 | 5 | ms |  | 638 |-| Self-timed row erase or self-timed write time | TP_REW |  | 2 | 2.8 | ms |  | 639 |-| Thermal resistance, junction to ambient | θJA |  | 43 |  | °C/W | 20-pin UQFN 4x4mm package | 639 |-| Thermal resistance, junction to case | θJC |  | 5.3 |  | °C/W | 20-pin UQFN 4x4mm package | 640 |+| Thermal resistance junction to ambient, 20-pin UQFN 4x4mm | θJA |  | 43 |  | °C/W | Operating temperature -40°C ≤ TA ≤ +125°C | 639 |+| Thermal resistance junction to case, 20-pin UQFN 4x4mm | θJC |  | 5.3 |  | °C/W | Operating temperature -40°C ≤ TA ≤ +125°C | 640 | | Maximum junction temperature | TJMAX |  | 150 |  | °C |  | 640 |  ## Materials and finish@@ -111,7 +118,7 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/40001985B.pdf) (708 pp, sha256 `3f4a8be840a03f4d`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/40001985B.pdf) (708 pp, sha256 `3f4a8be840a03f4d`, retrieved 2026-11-20) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated). 
package.json+593−32
@@ -1,6 +1,6 @@ {   "slug": "pic16f18446t-i-gz",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "Microchip Tech MICROCHIP, UQFN-20-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -53,7 +53,7 @@       "mouser": "579-PIC16F18446TIGZ"     },     "distributor_check": {-      "checked_at": "2026-11-13T02:58:09Z",+      "checked_at": "2026-11-20T07:30:15Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16F18446T-I/GZCT-ND",@@ -70,121 +70,121 @@         "number": "1",         "name": "RA3/MCLR/VPP",         "type": "input",-        "description": "Input-only pin that acts as the active-low Master Clear (MCLR) input when MCLRE is enabled and as the VPP high-voltage programming pin; when enabled, MCLR is connected to VDD through an internal weak pull-up."+        "description": "Input-only pin that functions as the Master Clear (MCLR) reset input when MCLRE is enabled and as the high-voltage programming pin VPP during HV programming."       },       {         "number": "2",         "name": "RC5",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC5 and default peripheral inputs MDCARH, T4IN and CCP1IN, which can be remapped with PPS; interrupt-on-change is supported."+        "description": "PORTC bit 5 that also provides analog input ANC5, MDCARH, Timer4 input T4IN and CCP1 input CCP1IN, with interrupt-on-change support."       },       {         "number": "3",         "name": "RC4",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC4; interrupt-on-change is supported and the pin can be used as a digital output or peripheral input."+        "description": "PORTC bit 4 that provides analog input ANC4 and interrupt-on-change support."       },       {         "number": "4",         "name": "RC3",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC3, comparator inputs C1IN3- and C2IN3-, and default CCP2IN and CLCIN1 peripheral inputs; interrupt-on-change is supported."+        "description": "PORTC bit 3 that provides analog input ANC3, comparator inputs C1IN3- and C2IN3-, CCP2 input CCP2IN and CLC input CLCIN1."       },       {         "number": "5",         "name": "RC6",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC6 and default SS1 peripheral input; interrupt-on-change is supported."+        "description": "PORTC bit 6 that provides analog input ANC6, MSSP slave select SS1 and interrupt-on-change support."       },       {         "number": "6",         "name": "RC7",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC7; interrupt-on-change is supported."+        "description": "PORTC bit 7 that provides analog input ANC7 and interrupt-on-change support."       },       {         "number": "7",         "name": "RB7",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANB7 and default SCK2/SCL2, CK1 and T6IN peripheral inputs; SCL2 uses I2C logic levels and interrupt-on-change is supported."+        "description": "PORTB bit 7 that provides analog input ANB7, Timer6 input T6IN, SPI/I2C clock SCK2/SCL2 and EUSART clock CK1."       },       {         "number": "8",         "name": "RB6",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANB6 and default SCK1/SCL1 clock input; the pin uses I2C logic levels for SCL1 and supports interrupt-on-change."+        "description": "PORTB bit 6 that provides analog input ANB6 and MSSP1 clock SCK1/SCL1 with interrupt-on-change support."       },       {         "number": "9",         "name": "RB5",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANB5 and default SDI2/SDA2, RX1/DT1, CCP3IN and CLCIN3 peripheral inputs; interrupt-on-change is supported."+        "description": "PORTB bit 5 that provides analog input ANB5, CCP3 input CCP3IN, MSSP2 data SDI2/SDA2, EUSART receive RX1/DT1 and CLC input CLCIN3."       },       {         "number": "10",         "name": "RB4",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANB4 and default SDI1/SDA1, T5G and CLCIN2 peripheral inputs; the pin uses I2C logic levels for SDA1 and supports interrupt-on-change."+        "description": "PORTB bit 4 that provides analog input ANB4, Timer5 gate T5G, MSSP1 data SDI1/SDA1 and CLC input CLCIN2."       },       {         "number": "11",         "name": "RC2",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC2, ADC auto-conversion trigger input ADACT, comparator inputs C1IN2- and C2IN2-, and default MDCARL and T5CKI inputs; interrupt-on-change is supported."+        "description": "PORTC bit 2 that provides analog input ANC2, ADC auto-conversion trigger ADACT, comparator inputs C1IN2- and C2IN2-, MDCARL and Timer5 clock T5CKI."       },       {         "number": "12",         "name": "RC1",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC1 and comparator inputs C1IN1- and C2IN1-; interrupt-on-change is supported."+        "description": "PORTC bit 1 that provides analog input ANC1 and comparator inputs C1IN1- and C2IN1-."       },       {         "number": "13",         "name": "RC0",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC0 and comparator input C2IN0+, plus default T3CKI and T3G timer inputs; interrupt-on-change is supported."+        "description": "PORTC bit 0 that provides analog input ANC0, comparator input C2IN0+, Timer3 clock T3CKI and Timer3 gate T3G."       },       {         "number": "14",         "name": "RA2",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANA2, ADC negative reference ADCVREF-, DAC1VREF- reference input, default T0CKI and CWG1IN/CWG2IN inputs, and external interrupt INT; interrupt-on-change and weak pull-up are supported."+        "description": "PORTA bit 2 that provides analog input ANA2, ADC negative reference ADCVREF-, DAC1 negative reference DAC1VREF-, Timer0 clock T0CKI, CWG inputs, ZCD1 and external interrupt INT."       },       {         "number": "15",-        "name": "RA1/ICSPCLK",+        "name": "RA1",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANA1, ADC positive reference ADCVREF+, comparator input C1IN0-/C2IN0- and DAC1VREF+ reference; it is also the ICD/ICSP clock pin (ICSPCLK) and supports interrupt-on-change and weak pull-up."+        "description": "PORTA bit 1 that provides analog input ANA1, ADC positive reference ADCVREF+, comparator inputs C1IN0- and C2IN0-, DAC1 positive reference DAC1VREF+ and ICD/ICSP clock ICDCLK/ICSPCLK."       },       {         "number": "16",-        "name": "RA0/ICSPDAT",+        "name": "RA0",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANA0, comparator input C1IN0+ and DAC1OUT1 output; it is also the ICD/ICSP data pin (ICSPDAT) and supports interrupt-on-change and weak pull-up."+        "description": "PORTA bit 0 that provides analog input ANA0, comparator input C1IN0+, DAC1OUT1 output and ICD/ICSP data ICDDAT/ICSPDAT."       },       {         "number": "17",         "name": "VSS",         "type": "power_in",-        "description": "Ground reference for the device logic and I/O pins."+        "description": "Device ground supply pin; the datasheet recommends connecting the exposed bottom pad to VSS."       },       {         "number": "18",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply pin; the PIC16F184XX operating voltage range is 2.3V to 5.5V."+        "description": "Positive device supply pin, to be decoupled to VSS with capacitors placed as close to the pins as possible."       },       {         "number": "19",         "name": "RA5/CLKIN/OSC1",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANA5 and default T1CKI, T2IN and SMT1SIG inputs; it doubles as the external clock input CLKIN or the oscillator input OSC1/SOSCI, and supports interrupt-on-change and weak pull-up."+        "description": "PORTA bit 5 that provides analog input ANA5, Timer1 clock T1CKI, Timer2 input T2IN, SMT1 signal SMT1SIG and the external clock/oscillator input CLKIN/SOSCI/OSC1."       },       {         "number": "20",         "name": "RA4/CLKOUT/OSC2",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANA4 and default T1G, SMT1WIN and CCP4IN inputs; it doubles as CLKOUT or the oscillator output OSC2/SOSCO, and supports interrupt-on-change and weak pull-up."+        "description": "PORTA bit 4 that provides analog input ANA4, Timer1 gate T1G, SMT1 window SMT1WIN, CCP4 input CCP4IN and the clock output/oscillator pin CLKOUT/SOSCO/OSC2."       },       {         "number": "21",@@ -204,18 +204,19 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The 4x4 UQFN exposed bottom pad has no pin number in the datasheet text. The datasheet only recommen; Pin numbers are taken from the 20-pin UQFN column of Table 4 (pages 8-9). The text rendering of Figu; The datasheet gives no per-pin electrical limits (for example, VIH/VIL or current ratings) in the pi",+          "extractor flagged: The exposed bottom pad of the 20-pin UQFN (4x4) is not given a pin number in the datasheet text; it ; The text lists the 20-pin UQFN (4x4) package for PIC16(L)F18446 (page 6 and page 14) but does not ma; RA4 and RA5 are multiplexed with the oscillator pins (OSC2/CLKOUT and OSC1/CLKIN); the type is set t",           "exposed pad 21 added from the footprint"         ],         "pages_sent": 73,-        "cost_usd": 0.041,-        "at": "2026-11-13T02:57:53"+        "cost_usd": 0.0403,+        "at": "2026-11-20T07:29:53"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/40001985B.pdf",         "pages": 708,         "sha256": "3f4a8be840a03f4d",-        "source_tier": "mfr"+        "source_tier": "mfr",+        "citation": "Microchip Tech datasheet"       },       "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",       "model_3d_generated": {@@ -252,8 +253,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "1152d03e95d691162f61735ba3aa2cdf9d5df0b9ad3e56d637aaadff25aa1793",-        "checked": "2026-11-13",+        "sha256": "22395109322d3593671fef1155adbf5f23aa14fd31d0261316c14d9ede90e878",+        "checked": "2026-11-20",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -271,8 +272,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "0c26481efb919a032de679ad7799c4a720089c79a75d498e6030a776a4f9a4ab",-        "checked": "2026-11-13",+        "sha256": "3e511ae282e0bb12e4935d404bde6223ba2be7fa2acda4cf13e1743195adff18",+        "checked": "2026-11-20",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -317,5 +318,565 @@         "by": "factory/package_fit.py"       }     }+  },+  "metadata": {+    "characteristics": {+      "version": 1,+      "source": "datasheet",+      "rows": [+        {+          "name": "Ambient temperature under bias",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "°C",+          "min": -40,+          "typ": null,+          "max": 125,+          "conditions": "",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "Storage temperature",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "°C",+          "min": -65,+          "typ": null,+          "max": 150,+          "conditions": "",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "Voltage on VDD pin with respect to VSS",+          "symbol": "VDD",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -0.3,+          "typ": null,+          "max": 6.5,+          "conditions": "PIC16F18426/46 (5.5V part)",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "Voltage on MCLR pin with respect to VSS",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -0.3,+          "typ": null,+          "max": 9,+          "conditions": "",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "Voltage on all other pins with respect to VSS (max = VDD + 0.3V)",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "V",+          "min": -0.3,+          "typ": null,+          "max": null,+          "conditions": "",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "Maximum current on VSS pin",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": null,+          "typ": null,+          "max": 250,+          "conditions": "-40°C ≤ TA ≤ +85°C",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "Maximum current on VSS pin",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": null,+          "typ": null,+          "max": 120,+          "conditions": "85°C < TA ≤ +125°C",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "Maximum current on VDD pin",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": null,+          "typ": null,+          "max": 250,+          "conditions": "-40°C ≤ TA ≤ +85°C",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "Maximum current on VDD pin",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": null,+          "typ": null,+          "max": 85,+          "conditions": "85°C < TA ≤ +125°C",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "Maximum current on any standard I/O pin",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": -50,+          "typ": null,+          "max": 50,+          "conditions": "",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "Clamp current",+          "symbol": "IK",+          "kind": "absolute_maximum",+          "unit": "mA",+          "min": -20,+          "typ": null,+          "max": 20,+          "conditions": "VPIN < 0 or VPIN > VDD",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "Total power dissipation",+          "symbol": "",+          "kind": "absolute_maximum",+          "unit": "mW",+          "min": null,+          "typ": null,+          "max": 800,+          "conditions": "",+          "source_page": 629,+          "source": "datasheet"+        },+        {+          "name": "VDD operating supply voltage",+          "symbol": "VDD",+          "kind": "recommended_operating",+          "unit": "V",+          "min": 2.3,+          "typ": null,+          "max": 5.5,+          "conditions": "FOSC ≤ 16 MHz",+          "source_page": 632,+          "source": "datasheet"+        },+        {+          "name": "VDD operating supply voltage",+          "symbol": "VDD",+          "kind": "recommended_operating",+          "unit": "V",+          "min": 2.5,+          "typ": null,+          "max": 5.5,+          "conditions": "FOSC > 16 MHz",+          "source_page": 632,+          "source": "datasheet"+        },+        {+          "name": "Operating ambient temperature range, industrial (-I)",+          "symbol": "TA",+          "kind": "recommended_operating",+          "unit": "°C",+          "min": -40,+          "typ": null,+          "max": 85,+          "conditions": "Industrial temperature",+          "source_page": 630,+          "source": "datasheet"+        },+        {+          "name": "RAM data retention voltage",+          "symbol": "VDR",+          "kind": "electrical",+          "unit": "V",+          "min": 1.7,+          "typ": null,+          "max": null,+          "conditions": "Device in Sleep mode",+          "source_page": 632,+          "source": "datasheet"+        },+        {+          "name": "VDD rise rate to ensure internal Power-on Reset signal",+          "symbol": "SVDD",+          "kind": "electrical",+          "unit": "V/ms",+          "min": 0.05,+          "typ": null,+          "max": null,+          "conditions": "BOR or LPBOR disabled",+          "source_page": 632,+          "source": "datasheet"+        },+        {+          "name": "Supply current, XT oscillator",+          "symbol": "IDDXT4",+          "kind": "electrical",+          "unit": "μA",+          "min": null,+          "typ": 515,+          "max": 710,+          "conditions": "XT = 4 MHz, 3.0V",+          "source_page": 634,+          "source": "datasheet"+        },+        {+          "name": "Supply current, HFINTOSC",+          "symbol": "IDDHFO16",+          "kind": "electrical",+          "unit": "mA",+          "min": null,+          "typ": 2.2,+          "max": 2.7,+          "conditions": "HFINTOSC = 16 MHz, 3.0V",+          "source_page": 634,+          "source": "datasheet"+        },+        {+          "name": "Supply current, HFINTOSC with PLL",+          "symbol": "IDDHFOPLL",+          "kind": "electrical",+          "unit": "mA",+          "min": null,+          "typ": 4,+          "max": 4.9,+          "conditions": "HFINTOSC = 32 MHz, 3.0V",+          "source_page": 634,+          "source": "datasheet"+        },+        {+          "name": "Supply current, HS with PLL",+          "symbol": "IDDHSPLL32",+          "kind": "electrical",+          "unit": "mA",+          "min": null,+          "typ": 3.7,+          "max": 4.5,+          "conditions": "HS+PLL = 32 MHz, 3.0V",+          "source_page": 634,+          "source": "datasheet"+        },+        {+          "name": "Supply current, IDLE mode",+          "symbol": "IDDIDLE",+          "kind": "electrical",+          "unit": "mA",+          "min": null,+          "typ": 1.6,+          "max": 2,+          "conditions": "IDLE mode, HFINTOSC = 16 MHz, 3.0V",+          "source_page": 634,+          "source": "datasheet"+        },+        {+          "name": "Power-down current, IPD base",+          "symbol": "IPD",+          "kind": "electrical",+          "unit": "μA",+          "min": null,+          "typ": 0.4,+          "max": 2.5,+          "conditions": "VDD 3.0V, VREGPM = 1, max at +85°C",+          "source_page": 636,+          "source": "datasheet"+        },+        {+          "name": "Power-down current, IPD base",+          "symbol": "IPD",+          "kind": "electrical",+          "unit": "μA",+          "min": null,+          "typ": 18,+          "max": 25,+          "conditions": "VDD 3.0V, VREGPM = 0, max at +85°C",+          "source_page": 636,+          "source": "datasheet"+        },+        {+          "name": "Power-down current, LFINTOSC/WDT",+          "symbol": "IPD_WDT",+          "kind": "electrical",+          "unit": "μA",+          "min": null,+          "typ": 1,+          "max": 2.9,+          "conditions": "VDD 3.0V, max at +85°C",+          "source_page": 636,+          "source": "datasheet"+        },+        {+          "name": "Power-down current, secondary oscillator (SOSC)",+          "symbol": "IPD_SOSC",+          "kind": "electrical",+          "unit": "μA",+          "min": null,+          "typ": 1.2,+          "max": 4.3,+          "conditions": "VDD 3.0V, max at +85°C",+          "source_page": 636,+          "source": "datasheet"+        },+        {+          "name": "Power-down current, FVR",+          "symbol": "IPD_FVR",+          "kind": "electrical",+          "unit": "μA",+          "min": null,+          "typ": 40,+          "max": 69,+          "conditions": "VDD 3.0V, max at +85°C",+          "source_page": 636,+          "source": "datasheet"+        },+        {+          "name": "Power-down current, BOR",+          "symbol": "IPD_BOR",+          "kind": "electrical",+          "unit": "μA",+          "min": null,+          "typ": 11,+          "max": 16,+          "conditions": "VDD 3.0V, max at +85°C",+          "source_page": 636,+          "source": "datasheet"+        },+        {+          "name": "Power-down current, ADC non-converting",+          "symbol": "IPD_ADCA",+          "kind": "electrical",+          "unit": "μA",+          "min": null,+          "typ": 0.38,+          "max": 2.5,+          "conditions": "VDD 3.0V, ADC not converting, max at +85°C",+          "source_page": 636,+          "source": "datasheet"+        },+        {+          "name": "Power-down current, comparator",+          "symbol": "IPD_CMP",+          "kind": "electrical",+          "unit": "μA",+          "min": null,+          "typ": 31,+          "max": 58,+          "conditions": "VDD 3.0V, max at +85°C",+          "source_page": 636,+          "source": "datasheet"+        },+        {+          "name": "Input low voltage, I/O port with TTL buffer",+          "symbol": "VIL",+          "kind": "electrical",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 0.8,+          "conditions": "4.5V≤VDD≤5.5V",+          "source_page": 637,+          "source": "datasheet"+        },+        {+          "name": "Input low voltage, I/O port with SMBus levels",+          "symbol": "VIL",+          "kind": "electrical",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 0.8,+          "conditions": "2.7V≤VDD≤5.5V",+          "source_page": 637,+          "source": "datasheet"+        },+        {+          "name": "Input high voltage, I/O port with TTL buffer",+          "symbol": "VIH",+          "kind": "electrical",+          "unit": "V",+          "min": 2,+          "typ": null,+          "max": null,+          "conditions": "4.5V≤VDD≤5.5V",+          "source_page": 637,+          "source": "datasheet"+        },+        {+          "name": "Input high voltage, I/O port with SMBus levels",+          "symbol": "VIH",+          "kind": "electrical",+          "unit": "V",+          "min": 2.1,+          "typ": null,+          "max": null,+          "conditions": "2.7V≤VDD≤5.5V",+          "source_page": 637,+          "source": "datasheet"+        },+        {+          "name": "Input leakage current, I/O ports",+          "symbol": "IIL",+          "kind": "electrical",+          "unit": "nA",+          "min": -125,+          "typ": 5,+          "max": 125,+          "conditions": "VSS≤VPIN≤VDD, pin at high-impedance, 85°C",+          "source_page": 637,+          "source": "datasheet"+        },+        {+          "name": "Input leakage current, MCLR",+          "symbol": "IIL",+          "kind": "electrical",+          "unit": "nA",+          "min": -200,+          "typ": 50,+          "max": 200,+          "conditions": "VSS≤VPIN≤VDD, pin at high-impedance, 85°C",+          "source_page": 637,+          "source": "datasheet"+        },+        {+          "name": "Weak pull-up current",+          "symbol": "IPUR",+          "kind": "electrical",+          "unit": "μA",+          "min": 25,+          "typ": 120,+          "max": 200,+          "conditions": "VDD=3.0V, VPIN=VSS",+          "source_page": 637,+          "source": "datasheet"+        },+        {+          "name": "Output low voltage, standard I/O ports",+          "symbol": "VOL",+          "kind": "electrical",+          "unit": "V",+          "min": null,+          "typ": null,+          "max": 0.6,+          "conditions": "IOL = 10 mA, VDD = 3.0V",+          "source_page": 637,+          "source": "datasheet"+        },+        {+          "name": "Pin capacitance, all I/O pins",+          "symbol": "CIO",+          "kind": "electrical",+          "unit": "pF",+          "min": null,+          "typ": 5,+          "max": 50,+          "conditions": "",+          "source_page": 637,+          "source": "datasheet"+        },+        {+          "name": "Voltage on MCLR/VPP pin to enter programming mode",+          "symbol": "VIHH",+          "kind": "electrical",+          "unit": "V",+          "min": 8,+          "typ": null,+          "max": 9,+          "conditions": "Note 2, Note 3",+          "source_page": 638,+          "source": "datasheet"+        },+        {+          "name": "Supply current during programming operation",+          "symbol": "IDDPGM",+          "kind": "electrical",+          "unit": "mA",+          "min": null,+          "typ": null,+          "max": 10,+          "conditions": "",+          "source_page": 638,+          "source": "datasheet"+        },+        {+          "name": "Byte erase and write cycle time",+          "symbol": "TD_BEW",+          "kind": "electrical",+          "unit": "ms",+          "min": null,+          "typ": 4,+          "max": 5,+          "conditions": "",+          "source_page": 638,+          "source": "datasheet"+        },+        {+          "name": "Self-timed row erase or self-timed write time",+          "symbol": "TP_REW",+          "kind": "electrical",+          "unit": "ms",+          "min": null,+          "typ": 2,+          "max": 2.8,+          "conditions": "",+          "source_page": 639,+          "source": "datasheet"+        },+        {+          "name": "Thermal resistance, junction to ambient",+          "symbol": "θJA",+          "kind": "thermal",+          "unit": "°C/W",+          "min": null,+          "typ": 43,+          "max": null,+          "conditions": "20-pin UQFN 4x4mm package",+          "source_page": 639,+          "source": "datasheet"+        },+        {+          "name": "Thermal resistance, junction to case",+          "symbol": "θJC",+          "kind": "thermal",+          "unit": "°C/W",+          "min": null,+          "typ": 5.3,+          "max": null,+          "conditions": "20-pin UQFN 4x4mm package",+          "source_page": 640,+          "source": "datasheet"+        },+        {+          "name": "Maximum junction temperature",+          "symbol": "TJMAX",+          "kind": "thermal",+          "unit": "°C",+          "min": null,+          "typ": 150,+          "max": null,+          "conditions": "",+          "source_page": 640,+          "source": "datasheet"+        }+      ]+    }   } }
page.json+36−50
@@ -4,7 +4,7 @@   "slug": "pic16f18446t-i-gz",   "title": "PIC16F18446T-I/GZ",   "brief": "Microchip Tech MICROCHIP, UQFN-20-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "579-PIC16F18446TIGZ"     },     "distributor_check": {-      "checked_at": "2026-11-13T02:58:09Z",+      "checked_at": "2026-11-20T07:30:15Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "PIC16F18446T-I/GZCT-ND",@@ -53,121 +53,121 @@         "number": "1",         "name": "RA3/MCLR/VPP",         "type": "input",-        "description": "Input-only pin that acts as the active-low Master Clear (MCLR) input when MCLRE is enabled and as the VPP high-voltage programming pin; when enabled, MCLR is connected to VDD through an internal weak pull-up."+        "description": "Input-only pin that functions as the Master Clear (MCLR) reset input when MCLRE is enabled and as the high-voltage programming pin VPP during HV programming."       },       {         "number": "2",         "name": "RC5",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC5 and default peripheral inputs MDCARH, T4IN and CCP1IN, which can be remapped with PPS; interrupt-on-change is supported."+        "description": "PORTC bit 5 that also provides analog input ANC5, MDCARH, Timer4 input T4IN and CCP1 input CCP1IN, with interrupt-on-change support."       },       {         "number": "3",         "name": "RC4",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC4; interrupt-on-change is supported and the pin can be used as a digital output or peripheral input."+        "description": "PORTC bit 4 that provides analog input ANC4 and interrupt-on-change support."       },       {         "number": "4",         "name": "RC3",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC3, comparator inputs C1IN3- and C2IN3-, and default CCP2IN and CLCIN1 peripheral inputs; interrupt-on-change is supported."+        "description": "PORTC bit 3 that provides analog input ANC3, comparator inputs C1IN3- and C2IN3-, CCP2 input CCP2IN and CLC input CLCIN1."       },       {         "number": "5",         "name": "RC6",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC6 and default SS1 peripheral input; interrupt-on-change is supported."+        "description": "PORTC bit 6 that provides analog input ANC6, MSSP slave select SS1 and interrupt-on-change support."       },       {         "number": "6",         "name": "RC7",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC7; interrupt-on-change is supported."+        "description": "PORTC bit 7 that provides analog input ANC7 and interrupt-on-change support."       },       {         "number": "7",         "name": "RB7",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANB7 and default SCK2/SCL2, CK1 and T6IN peripheral inputs; SCL2 uses I2C logic levels and interrupt-on-change is supported."+        "description": "PORTB bit 7 that provides analog input ANB7, Timer6 input T6IN, SPI/I2C clock SCK2/SCL2 and EUSART clock CK1."       },       {         "number": "8",         "name": "RB6",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANB6 and default SCK1/SCL1 clock input; the pin uses I2C logic levels for SCL1 and supports interrupt-on-change."+        "description": "PORTB bit 6 that provides analog input ANB6 and MSSP1 clock SCK1/SCL1 with interrupt-on-change support."       },       {         "number": "9",         "name": "RB5",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANB5 and default SDI2/SDA2, RX1/DT1, CCP3IN and CLCIN3 peripheral inputs; interrupt-on-change is supported."+        "description": "PORTB bit 5 that provides analog input ANB5, CCP3 input CCP3IN, MSSP2 data SDI2/SDA2, EUSART receive RX1/DT1 and CLC input CLCIN3."       },       {         "number": "10",         "name": "RB4",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANB4 and default SDI1/SDA1, T5G and CLCIN2 peripheral inputs; the pin uses I2C logic levels for SDA1 and supports interrupt-on-change."+        "description": "PORTB bit 4 that provides analog input ANB4, Timer5 gate T5G, MSSP1 data SDI1/SDA1 and CLC input CLCIN2."       },       {         "number": "11",         "name": "RC2",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC2, ADC auto-conversion trigger input ADACT, comparator inputs C1IN2- and C2IN2-, and default MDCARL and T5CKI inputs; interrupt-on-change is supported."+        "description": "PORTC bit 2 that provides analog input ANC2, ADC auto-conversion trigger ADACT, comparator inputs C1IN2- and C2IN2-, MDCARL and Timer5 clock T5CKI."       },       {         "number": "12",         "name": "RC1",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC1 and comparator inputs C1IN1- and C2IN1-; interrupt-on-change is supported."+        "description": "PORTC bit 1 that provides analog input ANC1 and comparator inputs C1IN1- and C2IN1-."       },       {         "number": "13",         "name": "RC0",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANC0 and comparator input C2IN0+, plus default T3CKI and T3G timer inputs; interrupt-on-change is supported."+        "description": "PORTC bit 0 that provides analog input ANC0, comparator input C2IN0+, Timer3 clock T3CKI and Timer3 gate T3G."       },       {         "number": "14",         "name": "RA2",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANA2, ADC negative reference ADCVREF-, DAC1VREF- reference input, default T0CKI and CWG1IN/CWG2IN inputs, and external interrupt INT; interrupt-on-change and weak pull-up are supported."+        "description": "PORTA bit 2 that provides analog input ANA2, ADC negative reference ADCVREF-, DAC1 negative reference DAC1VREF-, Timer0 clock T0CKI, CWG inputs, ZCD1 and external interrupt INT."       },       {         "number": "15",-        "name": "RA1/ICSPCLK",+        "name": "RA1",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANA1, ADC positive reference ADCVREF+, comparator input C1IN0-/C2IN0- and DAC1VREF+ reference; it is also the ICD/ICSP clock pin (ICSPCLK) and supports interrupt-on-change and weak pull-up."+        "description": "PORTA bit 1 that provides analog input ANA1, ADC positive reference ADCVREF+, comparator inputs C1IN0- and C2IN0-, DAC1 positive reference DAC1VREF+ and ICD/ICSP clock ICDCLK/ICSPCLK."       },       {         "number": "16",-        "name": "RA0/ICSPDAT",+        "name": "RA0",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANA0, comparator input C1IN0+ and DAC1OUT1 output; it is also the ICD/ICSP data pin (ICSPDAT) and supports interrupt-on-change and weak pull-up."+        "description": "PORTA bit 0 that provides analog input ANA0, comparator input C1IN0+, DAC1OUT1 output and ICD/ICSP data ICDDAT/ICSPDAT."       },       {         "number": "17",         "name": "VSS",         "type": "power_in",-        "description": "Ground reference for the device logic and I/O pins."+        "description": "Device ground supply pin; the datasheet recommends connecting the exposed bottom pad to VSS."       },       {         "number": "18",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply pin; the PIC16F184XX operating voltage range is 2.3V to 5.5V."+        "description": "Positive device supply pin, to be decoupled to VSS with capacitors placed as close to the pins as possible."       },       {         "number": "19",         "name": "RA5/CLKIN/OSC1",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANA5 and default T1CKI, T2IN and SMT1SIG inputs; it doubles as the external clock input CLKIN or the oscillator input OSC1/SOSCI, and supports interrupt-on-change and weak pull-up."+        "description": "PORTA bit 5 that provides analog input ANA5, Timer1 clock T1CKI, Timer2 input T2IN, SMT1 signal SMT1SIG and the external clock/oscillator input CLKIN/SOSCI/OSC1."       },       {         "number": "20",         "name": "RA4/CLKOUT/OSC2",         "type": "bidirectional",-        "description": "General-purpose bidirectional I/O with analog input ANA4 and default T1G, SMT1WIN and CCP4IN inputs; it doubles as CLKOUT or the oscillator output OSC2/SOSCO, and supports interrupt-on-change and weak pull-up."+        "description": "PORTA bit 4 that provides analog input ANA4, Timer1 gate T1G, SMT1 window SMT1WIN, CCP4 input CCP4IN and the clock output/oscillator pin CLKOUT/SOSCO/OSC2."       },       {         "number": "21",@@ -187,18 +187,19 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The 4x4 UQFN exposed bottom pad has no pin number in the datasheet text. The datasheet only recommen; Pin numbers are taken from the 20-pin UQFN column of Table 4 (pages 8-9). The text rendering of Figu; The datasheet gives no per-pin electrical limits (for example, VIH/VIL or current ratings) in the pi",+          "extractor flagged: The exposed bottom pad of the 20-pin UQFN (4x4) is not given a pin number in the datasheet text; it ; The text lists the 20-pin UQFN (4x4) package for PIC16(L)F18446 (page 6 and page 14) but does not ma; RA4 and RA5 are multiplexed with the oscillator pins (OSC2/CLKOUT and OSC1/CLKIN); the type is set t",           "exposed pad 21 added from the footprint"         ],         "pages_sent": 73,-        "cost_usd": 0.041,-        "at": "2026-11-13T02:57:53"+        "cost_usd": 0.0403,+        "at": "2026-11-20T07:29:53"       },       "datasheet": {         "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/40001985B.pdf",         "pages": 708,         "sha256": "3f4a8be840a03f4d",-        "source_tier": "mfr"+        "source_tier": "mfr",+        "citation": "Microchip Tech datasheet"       },       "cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",       "model_3d_generated": {@@ -235,8 +236,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "1152d03e95d691162f61735ba3aa2cdf9d5df0b9ad3e56d637aaadff25aa1793",-        "checked": "2026-11-13",+        "sha256": "22395109322d3593671fef1155adbf5f23aa14fd31d0261316c14d9ede90e878",+        "checked": "2026-11-20",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -254,8 +255,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "0c26481efb919a032de679ad7799c4a720089c79a75d498e6030a776a4f9a4ab",-        "checked": "2026-11-13",+        "sha256": "3e511ae282e0bb12e4935d404bde6223ba2be7fa2acda4cf13e1743195adff18",+        "checked": "2026-11-20",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -302,26 +303,9 @@     }   },   "metadata": {-    "specs": {-      "Manufacturer": "Microchip Tech",-      "Package": "UQFN-20-EP(4x4)",-      "Category": "Embedded Processors & Controllers",-      "Pins": "21"-    },-    "appearance": {-      "housing": {-        "quote": "body RxyPPS",-        "page": 267,-        "doc": "ds.pdf",-        "material": "PPS"-      },-      "version": 1,-      "datasheet_sha256": "3f4a8be840a03f4de72a8e367405828137173604ac7d790e8a7608d324698c2b"-    },     "characteristics": {       "version": 1,       "source": "datasheet",-      "datasheet_sha256": "3f4a8be840a03f4de72a8e367405828137173604ac7d790e8a7608d324698c2b",       "rows": [         {           "name": "Ambient temperature under bias",@@ -916,5 +900,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech MICROCHIP, UQFN-20-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pic16f18446t-i-gz-hero.glb
⋯ 1 unchanged line ⋯
pic16f18446t-i-gz-hero.overlay.json+535−540
@@ -1,542 +1,537 @@ {- "spec": "adom-hero 1.4",- "mpn": "PIC16F18446T-I",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {-  "pad_outlines": {-   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-   "rgba": [-    0.0,-    0.902,-    0.863,-    0.5-   ],-   "pads": 21,-   "span_mm": 6.375,-   "dash_mm": 0.1594,-   "gap_mm": 0.0956,-   "pad_stroke_mm": 0.0382-  },-  "silkscreen": {-   "material": "Silkscreen reference lines - 30 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.3-   ],-   "footprint_items": 9,-   "pin1": {-    "source": "footprint silkscreen",-    "pad": "1"-   }-  },-  "signal_names": {-   "material": "Signal names - 50 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.5-   ],-   "font": "DejaVu Sans Mono",-   "labels": 20,-   "sides": "top + mirrored underside (single-sided)",-   "omitted": null,-   "fallback_to_pad_number": 0-  }- },- "align": {-  "ok": true,-  "board_underside": true,-  "electrical_pads_without_contact": [],-  "mounting_pads_left_out": [],-  "centre_offset_mm": 0.0,-  "over_pads": false,-  "tolerance_mm": 0.376,-  "orientation_flipped": false,-  "contacts_bbox_mm": [-   -2.01,-   2.01,-   -2.01,-   2.01-  ],-  "pads_bbox_mm": [-   -2.35,-   2.35,-   -2.35,-   2.35+  "spec": "adom-hero 1.4",+  "mpn": "PIC16F18446T-I/GZ",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 21,+      "span_mm": 6.375,+      "dash_mm": 0.1594,+      "gap_mm": 0.0956,+      "pad_stroke_mm": 0.0382+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 9,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 20,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.376,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -2.01,+      2.01,+      -2.01,+      2.01+    ],+    "pads_bbox_mm": [+      -2.35,+      2.35,+      -2.35,+      2.35+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "pic16f18446t-i-gz-etched.glb",+    "glb_sha256": "4d49d71a842c511066fde7e7bac122c3967ac78496a4047403b266ba469b2588",+    "footprint": "pic16f18446t-i-gz.kicad_mod",+    "footprint_sha256": "ad6e4836412ca5dd309346710582478a978b7c0ff31d78fb456c167ba4c30042",+    "pins": "page.json component.pins",+    "pins_sha256": "6a59f491248bf1a4e34e0ae59b0a3ac44a62ff5abbf72614f9d5f98b818939eb"+  },+  "generator": "adom-wiki 1.8.30 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "RA3/MCLR/VPP",+      "x": -3.04,+      "y": -1.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "2",+      "text": "RC5",+      "x": -2.45,+      "y": -0.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "3",+      "text": "RC4",+      "x": -2.45,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "4",+      "text": "RC3",+      "x": -2.45,+      "y": 0.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "5",+      "text": "RC6",+      "x": -2.45,+      "y": 1.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "6",+      "text": "RC7",+      "x": -1.0,+      "y": 2.45,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "7",+      "text": "RB7",+      "x": -0.5,+      "y": 2.45,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "8",+      "text": "RB6",+      "x": 0.0,+      "y": 2.45,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "9",+      "text": "RB5",+      "x": 0.5,+      "y": 2.45,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "10",+      "text": "RB4",+      "x": 1.0,+      "y": 2.45,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "11",+      "text": "RC2",+      "x": 2.45,+      "y": 1.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "12",+      "text": "RC1",+      "x": 2.45,+      "y": 0.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "13",+      "text": "RC0",+      "x": 2.45,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "14",+      "text": "RA2",+      "x": 2.45,+      "y": -0.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "15",+      "text": "RA1",+      "x": 2.45,+      "y": -1.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "16",+      "text": "RA0",+      "x": 1.0,+      "y": -2.45,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "17",+      "text": "VSS",+      "x": 0.5,+      "y": -2.45,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "18",+      "text": "VDD",+      "x": 0.0,+      "y": -2.45,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "19",+      "text": "RA5/CLKIN/OSC1",+      "x": -0.5,+      "y": -2.45,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "20",+      "text": "RA4/CLKOUT/OSC2",+      "x": -1.0,+      "y": -2.45,+      "align": "left",+      "vertical": true,+      "h": 0.25+    }   ],-  "seating_z_mm": -0.0- },- "sources": {-  "glb": "pic16f18446t-i-gz-etched.glb",-  "glb_sha256": "4d49d71a842c511066fde7e7bac122c3967ac78496a4047403b266ba469b2588",-  "footprint": "pic16f18446t-i-gz.kicad_mod",-  "footprint_sha256": "ad6e4836412ca5dd309346710582478a978b7c0ff31d78fb456c167ba4c30042",-  "pins": "page.json component.pins",-  "pins_sha256": "a5511f01c3d4805bc56335a5481ae5ea0a2be1aece23ea69a7e76e8ee36a689d"- },- "generator": "factory/hero_glb.py",- "labels": [-  {-   "pad": "1",-   "text": "RA3/MCLR/VPP",-   "x": -3.04,-   "y": -1.0,-   "align": "right",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "2",-   "text": "RC5",-   "x": -2.45,-   "y": -0.5,-   "align": "right",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "3",-   "text": "RC4",-   "x": -2.45,-   "y": 0.0,-   "align": "right",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "4",-   "text": "RC3",-   "x": -2.45,-   "y": 0.5,-   "align": "right",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "5",-   "text": "RC6",-   "x": -2.45,-   "y": 1.0,-   "align": "right",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "6",-   "text": "RC7",-   "x": -1.0,-   "y": 2.45,-   "align": "right",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "7",-   "text": "RB7",-   "x": -0.5,-   "y": 2.45,-   "align": "right",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "8",-   "text": "RB6",-   "x": 0.0,-   "y": 2.45,-   "align": "right",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "9",-   "text": "RB5",-   "x": 0.5,-   "y": 2.45,-   "align": "right",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "10",-   "text": "RB4",-   "x": 1.0,-   "y": 2.45,-   "align": "right",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "11",-   "text": "RC2",-   "x": 2.45,-   "y": 1.0,-   "align": "left",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "12",-   "text": "RC1",-   "x": 2.45,-   "y": 0.5,-   "align": "left",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "13",-   "text": "RC0",-   "x": 2.45,-   "y": 0.0,-   "align": "left",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "14",-   "text": "RA2",-   "x": 2.45,-   "y": -0.5,-   "align": "left",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "15",-   "text": "RA1/ICSPCLK",-   "x": 2.45,-   "y": -1.0,-   "align": "left",-   "vertical": false,-   "h": 0.25-  },-  {-   "pad": "16",-   "text": "RA0/ICSPDAT",-   "x": 1.0,-   "y": -2.45,-   "align": "left",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "17",-   "text": "VSS",-   "x": 0.5,-   "y": -2.45,-   "align": "left",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "18",-   "text": "VDD",-   "x": 0.0,-   "y": -2.45,-   "align": "left",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "19",-   "text": "RA5/CLKIN/OSC1",-   "x": -0.5,-   "y": -2.45,-   "align": "left",-   "vertical": true,-   "h": 0.25-  },-  {-   "pad": "20",-   "text": "RA4/CLKOUT/OSC2",-   "x": -1.0,-   "y": -2.45,-   "align": "left",-   "vertical": true,-   "h": 0.25-  }- ],- "pads": [-  {-   "number": "1",-   "shape": "roundrect",-   "center_mm": [-    -1.9375,-    -1.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "2",-   "shape": "roundrect",-   "center_mm": [-    -1.9375,-    -0.5-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "3",-   "shape": "roundrect",-   "center_mm": [-    -1.9375,-    0.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "4",-   "shape": "roundrect",-   "center_mm": [-    -1.9375,-    0.5-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "5",-   "shape": "roundrect",-   "center_mm": [-    -1.9375,-    1.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "6",-   "shape": "roundrect",-   "center_mm": [-    -1.0,-    1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "7",-   "shape": "roundrect",-   "center_mm": [-    -0.5,-    1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "8",-   "shape": "roundrect",-   "center_mm": [-    0.0,-    1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "9",-   "shape": "roundrect",-   "center_mm": [-    0.5,-    1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "10",-   "shape": "roundrect",-   "center_mm": [-    1.0,-    1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "11",-   "shape": "roundrect",-   "center_mm": [-    1.9375,-    1.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "12",-   "shape": "roundrect",-   "center_mm": [-    1.9375,-    0.5-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "13",-   "shape": "roundrect",-   "center_mm": [-    1.9375,-    0.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "14",-   "shape": "roundrect",-   "center_mm": [-    1.9375,-    -0.5-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "15",-   "shape": "roundrect",-   "center_mm": [-    1.9375,-    -1.0-   ],-   "size_mm": [-    0.825,-    0.25-   ],-   "rot": 0.0-  },-  {-   "number": "16",-   "shape": "roundrect",-   "center_mm": [-    1.0,-    -1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "17",-   "shape": "roundrect",-   "center_mm": [-    0.5,-    -1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "18",-   "shape": "roundrect",-   "center_mm": [-    0.0,-    -1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "19",-   "shape": "roundrect",-   "center_mm": [-    -0.5,-    -1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "20",-   "shape": "roundrect",-   "center_mm": [-    -1.0,-    -1.9375-   ],-   "size_mm": [-    0.25,-    0.825-   ],-   "rot": 0.0-  },-  {-   "number": "21",-   "shape": "rect",-   "center_mm": [-    0.0,-    0.0-   ],-   "size_mm": [-    2.5,-    2.5-   ],-   "rot": 0.0-  }- ]-}\ No newline at end of file+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -1.9375,+        -1.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -1.9375,+        -0.5+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -1.9375,+        0.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -1.9375,+        0.5+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -1.9375,+        1.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -1.0,+        1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -0.5,+        1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        0.0,+        1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        0.5,+        1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        1.0,+        1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        1.9375,+        1.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        1.9375,+        0.5+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        1.9375,+        0.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        1.9375,+        -0.5+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        1.9375,+        -1.0+      ],+      "size_mm": [+        0.825,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        1.0,+        -1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        0.5,+        -1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        0.0,+        -1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        -0.5,+        -1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        -1.0,+        -1.9375+      ],+      "size_mm": [+        0.25,+        0.825+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "rect",+      "center_mm": [+        0.0,+        0.0+      ],+      "size_mm": [+        2.5,+        2.5+      ],+      "rot": 0.0+    }+  ]+}
pic16f18446t-i-gz.kicad_sym+2−2
@@ -73,11 +73,11 @@       (number "17" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)-      (name "RA0/ICSPDAT" (effects (font (size 1.27 1.27))))+      (name "RA0" (effects (font (size 1.27 1.27))))       (number "16" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)-      (name "RA1/ICSPCLK" (effects (font (size 1.27 1.27))))+      (name "RA1" (effects (font (size 1.27 1.27))))       (number "15" (effects (font (size 1.27 1.27))))     )     (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)
pic16f18446t-i-gz.lbr+4−4
@@ -124,8 +124,8 @@   <pin name="RA5/CLKIN/OSC1" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>   <pin name="VDD" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>   <pin name="VSS" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>-  <pin name="RA0/ICSPDAT" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>-  <pin name="RA1/ICSPCLK" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+  <pin name="RA0" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="RA1" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>   <pin name="RA2" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>   <pin name="RC0" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>   <pin name="RC1" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>@@ -156,8 +156,8 @@         <connect gate="G$1" pin="RA5/CLKIN/OSC1" pad="19"/>         <connect gate="G$1" pin="VDD" pad="18"/>         <connect gate="G$1" pin="VSS" pad="17"/>-        <connect gate="G$1" pin="RA0/ICSPDAT" pad="16"/>-        <connect gate="G$1" pin="RA1/ICSPCLK" pad="15"/>+        <connect gate="G$1" pin="RA0" pad="16"/>+        <connect gate="G$1" pin="RA1" pad="15"/>         <connect gate="G$1" pin="RA2" pad="14"/>         <connect gate="G$1" pin="RC0" pad="13"/>         <connect gate="G$1" pin="RC1" pad="12"/>
pic16f18446t-i-gz.step+1−1
@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-13T02:57:58',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-20T07:29:58',('Author'),(     'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'   ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));