← Commit history
README.mdadded+61@@ -0,0 +1,61 @@+# PIC16F1827T-I++**Microchip** · Microcontrollers (MCU/MPU/SOC) · SSOP-20-208mil++PIC16F1827T-I from Microchip, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RA2/AN2/CPS2/C12IN2-/C12IN+/VREF-/DACOUT | bidirectional | General-purpose I/O RA2. Muxed with ADC channel AN2, capacitive sensing input CPS2, comparator C1/C2 negative input C12IN2-, comparator C1/C2 positive input C12IN+, ADC negative voltage reference VREF-, and 5-bit resistive DAC analog output DACOUT. |+| 2 | RA3/AN3/CPS3/C12IN3-/C1IN+/VREF+/C1OUT/CCP3/SRQ | bidirectional | General-purpose I/O RA3. Muxed with ADC channel AN3, capacitive sensing CPS3, comparator C1/C2 negative input C12IN3-, comparator C1 positive input C1IN+, ADC positive voltage reference VREF+, comparator C1 output C1OUT, Capture/Compare/PWM CCP3 (PIC16(L)F1827 only), and SR latch non-inverting output SRQ. |+| 3 | RA4/AN4/CPS4/C2OUT/T0CKI/CCP4/SRNQ | bidirectional | General-purpose I/O RA4. Muxed with ADC channel AN4, capacitive sensing CPS4, comparator C2 output C2OUT, Timer0 clock input T0CKI, Capture/Compare/PWM CCP4 (PIC16(L)F1827 only), and SR latch inverting output SRNQ. |+| 4 | RA5/MCLR/VPP/SS1 | input | Input-only pin RA5. Muxed with active-low Master Clear (Reset) MCLR with internal weak pull-up, High-Voltage programming voltage VPP, and SPI slave-select input SS1. |+| 5 | VSS | power_in | Ground reference for logic and I/O. |+| 6 | RB0/T1G/CCP1/P1A/INT/SRI/FLT0 | bidirectional | General-purpose I/O RB0 with interrupt-on-change and individually enabled weak pull-up. Muxed with Timer1 gate input T1G, Capture/Compare/PWM CCP1, Enhanced PWM output P1A, external interrupt INT, SR latch input SRI, and ECCP auto-shutdown fault input FLT0. |+| 7 | RB1/AN11/CPS11/RX/DT/SDA1/SDI1 | bidirectional | General-purpose I/O RB1 with interrupt-on-change and pull-up. Muxed with ADC channel AN11, capacitive sensing CPS11, EUSART asynchronous receive RX, EUSART synchronous data DT, I2C data SDA1 (open-drain), and SPI data input SDI1. |+| 8 | RB2/AN10/CPS10/MDMIN/TX/CK/RX/DT/SDA2/SDI2/SDO1 | bidirectional | General-purpose I/O RB2 with interrupt-on-change and pull-up. Muxed with ADC channel AN10, capacitive sensing CPS10, Data Signal Modulator input MDMIN, EUSART async transmit TX, EUSART sync clock CK, EUSART receive RX / sync data DT, I2C data SDA2 (open-drain), SPI data input SDI2, and SPI data output SDO1. |+| 9 | RB3/AN9/CPS9/MDOUT/CCP1/P1A | bidirectional | General-purpose I/O RB3 with interrupt-on-change and pull-up. Muxed with ADC channel AN9, capacitive sensing CPS9, Data Signal Modulator output MDOUT, Capture/Compare/PWM CCP1, and Enhanced PWM output P1A. |+| 10 | RB4/AN8/CPS8/SCL1/SCK1/MDCIN2 | bidirectional | General-purpose I/O RB4 with interrupt-on-change and pull-up. Muxed with ADC channel AN8, capacitive sensing CPS8, I2C clock SCL1 (open-drain), SPI clock SCK1, and Data Signal Modulator carrier input MDCIN2. |+| 11 | RB5/AN7/CPS7/P1B/TX/CK/SCL2/SCK2/SS1 | bidirectional | General-purpose I/O RB5 with interrupt-on-change and pull-up. Muxed with ADC channel AN7, capacitive sensing CPS7, Enhanced PWM output P1B, EUSART async transmit TX, EUSART sync clock CK, I2C clock SCL2 (open-drain), SPI clock SCK2, and SPI slave-select SS1. |+| 12 | RB6/AN5/CPS5/T1CKI/T1OSI/P1C/CCP2/P2A/ICSPCLK | bidirectional | General-purpose I/O RB6 with interrupt-on-change and pull-up. Muxed with ADC channel AN5, capacitive sensing CPS5, Timer1 external clock T1CKI, Timer1 oscillator input T1OSI, Enhanced PWM P1C, Capture/Compare/PWM CCP2, PWM output P2A, and In-Circuit Serial Programming clock ICSPCLK. |+| 13 | RB7/AN6/CPS6/T1OSO/P1D/P2B/MDCIN1/ICSPDAT | bidirectional | General-purpose I/O RB7 with interrupt-on-change and pull-up. Muxed with ADC channel AN6, capacitive sensing CPS6, Timer1 oscillator output T1OSO, Enhanced PWM outputs P1D and P2B, Data Signal Modulator carrier input MDCIN1, and In-Circuit Serial Programming data ICSPDAT. |+| 14 | VDD | power_in | Positive supply. 1.8-5.5V for PIC16F1827; 1.8-3.6V for PIC16LF1827. Decouple with a local ceramic capacitor to VSS. |+| 15 | RA6/OSC2/CLKOUT/CLKR/P2B/SDO1 | bidirectional | General-purpose I/O RA6. Muxed with crystal/resonator oscillator output OSC2 (LP/XT/HS modes), FOSC/4 clock output CLKOUT, programmable Clock Reference output CLKR, Enhanced PWM output P2B, and SPI data output SDO1. |+| 16 | RA7/OSC1/CLKIN/P1C/CCP2/P2A | bidirectional | General-purpose I/O RA7. Muxed with crystal/resonator oscillator input OSC1 (LP/XT/HS modes), external clock input CLKIN (EC mode), Enhanced PWM output P1C, Capture/Compare/PWM CCP2, and PWM output P2A. |+| 17 | RA0/AN0/CPS0/C12IN0-/SDO2 | bidirectional | General-purpose I/O RA0. Muxed with ADC channel AN0, capacitive sensing CPS0, comparator C1/C2 negative input C12IN0-, and SPI data output SDO2 (PIC16(L)F1827 only). |+| 18 | RA1/AN1/CPS1/C12IN1-/SS2 | bidirectional | General-purpose I/O RA1. Muxed with ADC channel AN1, capacitive sensing CPS1, comparator C1/C2 negative input C12IN1-, and SPI slave-select SS2 input (PIC16(L)F1827 only). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip |+| Package | SSOP-20-208mil |+| Category | MCU |+| Pins | 18 |++## Ordering variants++- `PIC16F1827T-II/P`+- `PIC16F1827T-II/SO`+- `PIC16F1827T-II/SS`+- `PIC16F1827T-II/ML`+- `PIC16F1827T-II/MV`++## CAD (KiCad official)++- Symbol: `PIC16F1827T-I`+- Footprint: `Package_SO:SSOP-20_5.3x7.2mm_P0.65mm`+- 3D model: SSOP-20-208mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip datasheet](docs/pic16f1827t-i-datasheet.pdf) (406 pp, sha256 `0e7915da61b6eca2`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pic16f1827t-i-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "pic16f1827t-i",+ "version": "0.1.0",+ "type": "component",+ "description": "Microchip Microcontrollers (MCU/MPU/SOC), SSOP-20-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "mcu",+ "pic16f1827t-i"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "pic16f1827t-i.kicad_sym",+ "pic16f1827t-i.kicad_mod",+ "pic16f1827t-i.glb",+ "pic16f1827t-i.step",+ "pic16f1827t-i.lbr",+ "docs/hero.png",+ "docs/pic16f1827t-i-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}