← Commit history
Publish 0.1.1
4 files changed
+415−11
package.json+145−3@@ -1,6 +1,6 @@ { "slug": "pic16f15313-i-sn",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Microchip Microcontrollers (MCU/MPU/SOC), SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,148 @@ "docs/hero.png", "docs/pic16f15313-i-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]+ "viewers/footprint.html",+ "pic16f15313-i-etched.step",+ "pic16f15313-i-etched.glb",+ "pic16f15313-i-sn-hero.glb",+ "pic16f15313-i-sn-hero.overlay.json"+ ],+ "component": {+ "mpn": "PIC16F15313-I/SN",+ "manufacturer": "Microchip",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Microcontrollers (MCU/MPU/SOC)",+ "parts": {+ "symbol": "pic16f15313-i.kicad_sym",+ "footprint": "pic16f15313-i.kicad_mod",+ "model_3d": "pic16f15313-i-sn-hero.glb",+ "model_3d_plain": "pic16f15313-i.glb",+ "model_3d_step": "pic16f15313-i-etched.step",+ "model_3d_step_plain": "pic16f15313-i.step",+ "lbr": "pic16f15313-i.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply voltage input. 2.3-5.5 V for PIC16F15313 (1.8-3.6 V for PIC16LF15313). Requires a 0.1 uF ceramic decoupling capacitor placed close to the pin."+ },+ {+ "number": "2",+ "name": "RA5/OSC1/CLKIN",+ "type": "bidirectional",+ "description": "General purpose I/O RA5. Multiplexed with ANA5 (ADC ch A5), ADACT (ADC auto-conversion trigger), T1CKI/T2IN clock inputs, CCP1/CCP2 (capture default), CLCIN1, external oscillator input OSC1 (LP/XT/HS modes), external digital clock input CLKIN/EIN, and IOCA5 interrupt-on-change. TTL/ST input, CMOS/OD output. Individually programmable weak pull-up."+ },+ {+ "number": "3",+ "name": "RA4/OSC2/CLKOUT",+ "type": "bidirectional",+ "description": "General purpose I/O RA4. Multiplexed with ANA4 (ADC ch A4), C1IN1- (comparator 1 negative input), T1G (Timer1 gate input), external oscillator driver output OSC2 (LP/XT/HS modes), CLKOUT (FOSC/4 output in non-crystal modes), and IOCA4 interrupt-on-change. TTL/ST input, CMOS/OD output. Individually programmable weak pull-up."+ },+ {+ "number": "4",+ "name": "RA3/MCLR/VPP",+ "type": "input",+ "description": "Multifunction pin. Serves as Master Clear (MCLR) reset input with internal weak pull-up (Schmitt Trigger), high-voltage ICSP programming entry input (VPP), general purpose input RA3 (input-only when MCLR is enabled, CMOS/OD when MCLRE is disabled), MSSP1 SPI slave select SS1, CLCIN0, and IOCA3 interrupt-on-change."+ },+ {+ "number": "5",+ "name": "RA2/INT",+ "type": "bidirectional",+ "description": "General purpose I/O RA2. Multiplexed with ANA2 (ADC ch A2), CWG1IN (Complementary Waveform Generator input), MSSP1 I2C SDA1 (open-drain, I2C logic levels), MSSP1 SPI SDI1 input, ZCD1 zero-cross detect input (constant current sink/source), INT external interrupt request, and IOCA2 interrupt-on-change. TTL/ST input, CMOS/OD output. Individually programmable weak pull-up."+ },+ {+ "number": "6",+ "name": "RA1/ICSPCLK",+ "type": "bidirectional",+ "description": "General purpose I/O RA1. Multiplexed with ANA1 (ADC ch A1), VREF+ (external ADC/DAC positive reference), C1IN0- (comparator 1 negative input), DAC1REF+ (DAC positive reference), T0CKI (Timer0 clock input), SCK1/SCL1 (MSSP1 SPI clock / I2C clock, I2C logic levels), RX1/DT1 (EUSART1 async receive / sync data), CLCIN2, ICSPCLK (In-Circuit Serial Programming clock), and IOCA1 interrupt-on-change. TTL/ST input, CMOS/OD output. Weak pull-up available."+ },+ {+ "number": "7",+ "name": "RA0/ICSPDAT",+ "type": "bidirectional",+ "description": "General purpose I/O RA0. Multiplexed with ANA0 (ADC ch A0), C1IN0+ (comparator 1 positive input), DAC1OUT (5-bit DAC analog output), TX1/CK1 (EUSART1 async transmit / sync clock), CLCIN3, ICSPDAT (In-Circuit Serial Programming data), and IOCA0 interrupt-on-change. TTL/ST input, CMOS/OD output. Weak pull-up available."+ },+ {+ "number": "8",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference (0 V) for the device. Must be connected to system ground; a 0.1 uF ceramic decoupling capacitor between VDD and VSS placed close to the pins is required."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:13:39Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "pic16f15313-i.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "pic16f15313-i-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d473ae1efc5ff1fc84b7cecd06d1f52ae56648be4274d3551386840e9c6e9f7c",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ],+ "family": {+ "base": "PIC16F15313-I",+ "siblings": [+ "PIC16F15313-I/RF"+ ],+ "old_slug": "pic16f15313-i",+ "note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"+ }+ },+ "visibility": "public" }
page.json+10−8@@ -1,6 +1,6 @@ { "slug": "pic16f15313-i-sn",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Microchip Microcontrollers (MCU/MPU/SOC), SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,12 @@ "docs/pic16f15313-i-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "pic16f15313-i-etched.step"+ "pic16f15313-i-etched.step",+ "pic16f15313-i-etched.glb",+ "pic16f15313-i-sn-hero.glb",+ "pic16f15313-i-sn-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -42,7 +43,7 @@ "parts": { "symbol": "pic16f15313-i.kicad_sym", "footprint": "pic16f15313-i.kicad_mod",- "model_3d": "pic16f15313-i-etched.glb",+ "model_3d": "pic16f15313-i-sn-hero.glb", "model_3d_plain": "pic16f15313-i.glb", "model_3d_step": "pic16f15313-i-etched.step", "model_3d_step_plain": "pic16f15313-i.step",@@ -169,5 +170,6 @@ "old_slug": "pic16f15313-i", "note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)" }- }-}+ },+ "org": "adom"+}
pic16f15313-i-sn-hero.glbadded⋯ 1 unchanged line ⋯
pic16f15313-i-sn-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "PIC16F15313-I/SN",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 6.9,+ "dash_mm": 0.1725,+ "gap_mm": 0.1035,+ "pad_stroke_mm": 0.0414+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -2.11,+ 2.11+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "pic16f15313-i.glb",+ "glb_sha256": "f10b15a10c98e84fd5223191d2bfb66554fa8950956609c321bb34628d5e18cd",+ "footprint": "pic16f15313-i.kicad_mod",+ "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+ "pins": "page.json component.pins",+ "pins_sha256": "e3053fc1843f69dea42273942687124e0a9437c0d40aefbef80d911638704a11"+ },+ "generator": "adom-wiki 1.8.24 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "VDD",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "RA5/OSC1/CLKIN",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "RA4/OSC2/CLKOUT",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "RA3/MCLR/VPP",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "RA2/INT",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "RA1/ICSPCLK",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "RA0/ICSPDAT",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "VSS",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}