← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# PIC16F15313-I++**Microchip** · Microcontrollers (MCU/MPU/SOC) · SOIC-8++PIC16F15313-I from Microchip, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Positive supply voltage input. 2.3-5.5 V for PIC16F15313 (1.8-3.6 V for PIC16LF15313). Requires a 0.1 uF ceramic decoupling capacitor placed close to the pin. |+| 2 | RA5/OSC1/CLKIN | bidirectional | General purpose I/O RA5. Multiplexed with ANA5 (ADC ch A5), ADACT (ADC auto-conversion trigger), T1CKI/T2IN clock inputs, CCP1/CCP2 (capture default), CLCIN1, external oscillator input OSC1 (LP/XT/HS modes), external digital clock input CLKIN/EIN, and IOCA5 interrupt-on-change. TTL/ST input, CMOS/OD output. Individually programmable weak pull-up. |+| 3 | RA4/OSC2/CLKOUT | bidirectional | General purpose I/O RA4. Multiplexed with ANA4 (ADC ch A4), C1IN1- (comparator 1 negative input), T1G (Timer1 gate input), external oscillator driver output OSC2 (LP/XT/HS modes), CLKOUT (FOSC/4 output in non-crystal modes), and IOCA4 interrupt-on-change. TTL/ST input, CMOS/OD output. Individually programmable weak pull-up. |+| 4 | RA3/MCLR/VPP | input | Multifunction pin. Serves as Master Clear (MCLR) reset input with internal weak pull-up (Schmitt Trigger), high-voltage ICSP programming entry input (VPP), general purpose input RA3 (input-only when MCLR is enabled, CMOS/OD when MCLRE is disabled), MSSP1 SPI slave select SS1, CLCIN0, and IOCA3 interrupt-on-change. |+| 5 | RA2/INT | bidirectional | General purpose I/O RA2. Multiplexed with ANA2 (ADC ch A2), CWG1IN (Complementary Waveform Generator input), MSSP1 I2C SDA1 (open-drain, I2C logic levels), MSSP1 SPI SDI1 input, ZCD1 zero-cross detect input (constant current sink/source), INT external interrupt request, and IOCA2 interrupt-on-change. TTL/ST input, CMOS/OD output. Individually programmable weak pull-up. |+| 6 | RA1/ICSPCLK | bidirectional | General purpose I/O RA1. Multiplexed with ANA1 (ADC ch A1), VREF+ (external ADC/DAC positive reference), C1IN0- (comparator 1 negative input), DAC1REF+ (DAC positive reference), T0CKI (Timer0 clock input), SCK1/SCL1 (MSSP1 SPI clock / I2C clock, I2C logic levels), RX1/DT1 (EUSART1 async receive / sync data), CLCIN2, ICSPCLK (In-Circuit Serial Programming clock), and IOCA1 interrupt-on-change. TTL/ST input, CMOS/OD output. Weak pull-up available. |+| 7 | RA0/ICSPDAT | bidirectional | General purpose I/O RA0. Multiplexed with ANA0 (ADC ch A0), C1IN0+ (comparator 1 positive input), DAC1OUT (5-bit DAC analog output), TX1/CK1 (EUSART1 async transmit / sync clock), CLCIN3, ICSPDAT (In-Circuit Serial Programming data), and IOCA0 interrupt-on-change. TTL/ST input, CMOS/OD output. Weak pull-up available. |+| 8 | VSS | power_in | Ground reference (0 V) for the device. Must be connected to system ground; a 0.1 uF ceramic decoupling capacitor between VDD and VSS placed close to the pins is required. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip |+| Package | SOIC-8 |+| Category | MCU |+| Pins | 8 |++## Ordering variants++- `PIC16F15313-II/P`+- `PIC16F15313-IE/P`+- `PIC16F15313-II/SN`+- `PIC16F15313-IE/SN`+- `PIC16F15313-II/MS`+- `PIC16F15313-IE/MS`+- `PIC16F15313-II/MF`+- `PIC16F15313-IE/MF`++## CAD (KiCad official)++- Symbol: `PIC16F15313-I`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip datasheet](docs/pic16f15313-i-datasheet.pdf) (None pp, sha256 `e259276ffc11ffa9`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pic16f15313-i-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "pic16f15313-i",+ "version": "0.1.0",+ "type": "component",+ "description": "Microchip Microcontrollers (MCU/MPU/SOC), SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "mcu",+ "pic16f15313-i"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "pic16f15313-i.kicad_sym",+ "pic16f15313-i.kicad_mod",+ "pic16f15313-i.glb",+ "pic16f15313-i.step",+ "pic16f15313-i.lbr",+ "docs/hero.png",+ "docs/pic16f15313-i-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}