← Commit history

pi7c9x760czdex: factory component page (tier=lcsc)

Ray ·8b824d752c · ·parent 6886260
1 file changed +228−8
page.json+228−8
@@ -1,13 +1,238 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "pi7c9x760czdex",+  "title": "PI7C9X760CZDEX",+  "brief": "Diodes Incorporated UART, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Diodes Incorporated UART, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "interface",     "pi7c9x760czdex"   ],+  "component": {+    "mpn": "PI7C9X760CZDEX",+    "manufacturer": "Diodes Incorporated",+    "package": "QFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Interface",+    "subcategory": "UART",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560088737129926656",+    "parts": {+      "symbol": "pi7c9x760czdex.kicad_sym",+      "footprint": "pi7c9x760czdex.kicad_mod",+      "model_3d": "pi7c9x760czdex.glb",+      "model_3d_step": "pi7c9x760czdex.step",+      "lbr": "pi7c9x760czdex.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "RESET",+        "type": "input",+        "description": "Active-LOW reset input. A LOW pulse longer than 40 ns resets internal registers, forces all outputs to their reset state, and enables mode strapping. UART TX is idle and RX is ignored while asserted."+      },+      {+        "number": "2",+        "name": "XTAL1",+        "type": "input",+        "description": "Crystal input or external clock input. Connect a crystal between XTAL1 and XTAL2 (up to 24 MHz), or drive with an external clock up to 64 MHz."+      },+      {+        "number": "3",+        "name": "XTAL2",+        "type": "output",+        "description": "Crystal oscillator output. Used together with XTAL1 to form the internal oscillator circuit; leave floating when driving XTAL1 from an external clock."+      },+      {+        "number": "4",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive supply. Wide operating range 1.8 V / 2.5 V / 3.3 V. Decouple locally to VSS."+      },+      {+        "number": "5",+        "name": "I2C/SPI",+        "type": "input",+        "description": "Host interface select strap. HIGH selects the I2C-bus slave interface; LOW selects SPI mode 0 slave. Sampled at reset."+      },+      {+        "number": "6",+        "name": "CS/A0",+        "type": "input",+        "description": "In SPI mode: Schmitt-trigger active-LOW SPI chip-select (CS). In I2C mode: device address select bit A0 (combined with A1 selects the base slave address per Table 9)."+      },+      {+        "number": "7",+        "name": "SI/A1",+        "type": "input",+        "description": "In SPI mode: SPI serial data input (MOSI). In I2C mode: device address select bit A1 (combined with A0 selects the base slave address per Table 9)."+      },+      {+        "number": "8",+        "name": "SO",+        "type": "tri_state",+        "description": "SPI serial data output (MISO), tri-stateable. In I2C-bus configuration this pin's function is undefined and must be left as no-connect (N.C.)."+      },+      {+        "number": "9",+        "name": "SCL/SCLK",+        "type": "input",+        "description": "I2C-bus clock (SCL) input, or SPI serial clock (SCLK) input. Function selected by the I2C/SPI strap on pin 5."+      },+      {+        "number": "10",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C-bus data line, open-drain (bidirectional) when I2C is selected. In SPI configuration this pin is undefined and must be tied to VSS."+      },+      {+        "number": "11",+        "name": "IRQ",+        "type": "output",+        "description": "Interrupt output, open-drain, active-LOW. Requires an external pull-up (~1 k\u03a9 at 3.3 V, 1.5 k\u03a9 at 2.5 V) to VDD. Fires on GPIO input change, RX errors, RX data available, TX buffer space, or modem status changes when enabled in the IER."+      },+      {+        "number": "12",+        "name": "GPIO0",+        "type": "bidirectional",+        "description": "Programmable general-purpose I/O pin. Direction and level controlled by the GPIO register."+      },+      {+        "number": "13",+        "name": "GPIO1",+        "type": "bidirectional",+        "description": "Programmable general-purpose I/O pin."+      },+      {+        "number": "14",+        "name": "GPIO2",+        "type": "bidirectional",+        "description": "Programmable general-purpose I/O pin."+      },+      {+        "number": "15",+        "name": "GPIO3",+        "type": "bidirectional",+        "description": "Programmable general-purpose I/O pin."+      },+      {+        "number": "16",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground return."+      },+      {+        "number": "17",+        "name": "GPIO4/DSR",+        "type": "bidirectional",+        "description": "Programmable I/O pin, or modem DSR (Data Set Ready) input when configured for modem control."+      },+      {+        "number": "18",+        "name": "GPIO5/DTR",+        "type": "bidirectional",+        "description": "Programmable I/O pin, or modem DTR (Data Terminal Ready) output when configured for modem control."+      },+      {+        "number": "19",+        "name": "GPIO6/CD",+        "type": "bidirectional",+        "description": "Programmable I/O pin, or modem CD (Carrier Detect) input when configured for modem control."+      },+      {+        "number": "20",+        "name": "GPIO7/RI",+        "type": "bidirectional",+        "description": "Programmable I/O pin, or modem RI (Ring Indicator) input when configured for modem control."+      },+      {+        "number": "21",+        "name": "RTS",+        "type": "output",+        "description": "UART request-to-send output, active-LOW. Reflects MCR[1] or, if auto-RTS is enabled in EFR[6], is automatically driven based on RX-FIFO fill. Also used as RS-485 driver direction control."+      },+      {+        "number": "22",+        "name": "CTS",+        "type": "input",+        "description": "UART clear-to-send input, active-LOW. Readable via MSR[4]; also gates transmission when auto-CTS is enabled via EFR[7]."+      },+      {+        "number": "23",+        "name": "TX",+        "type": "output",+        "description": "UART transmitter output. In local loopback mode the pin is disabled and TX data is internally routed to RX."+      },+      {+        "number": "24",+        "name": "RX",+        "type": "input",+        "description": "UART receiver input. In local loopback mode the pin is disabled and the internal TX is looped back to RX."+      },+      {+        "number": "EP",+        "name": "VSS",+        "type": "power_in",+        "description": "Exposed thermal/center pad on the underside of the QFN-24. Metallic; must be soldered to the PCB ground plane."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560088737129926656",+        "pages": 52,+        "sha256": "f897ef4d5061537b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Diodes Incorporated",+      "Package": "QFN-24-EP(4x4)",+      "Category": "Interface",+      "Pins": "25"+    }+  },+  "variants": [+    {+      "mpn": "PI7C9X760CZDEX",+      "kind": "packaging"+    },+    {+      "mpn": "PI7C9X760CZDEXL",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "pi7c9x760czdex"+  ],+  "discovery_pitch": "PI7C9X760CZDEX (Diodes Incorporated) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +250,5 @@     "docs/pi7c9x760czdex-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file