← Commit history

Initial commit: component/pcm2912apjtr

Ray ·e943692024 ·
2 files changed +353
README.mdadded+68
@@ -0,0 +1,68 @@+# PCM2912APJTR++**Texas Instruments** · Audio Interface ICs · TQFP-32(7x7)++PCM2912APJTR from Texas Instruments, in a TQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BGND | power_in | Reference ground for internal band-gap circuit. |+| 2 | VBUS | power_in | USB power supply input, 4.35 to 5.25 V. |+| 3 | D- | bidirectional | USB D- differential signal, LV-TTL level. |+| 4 | D+ | bidirectional | USB D+ differential signal, LV-TTL level. |+| 5 | VDD | power_out | Digital power supply output, 3.3 V typical from internal regulator. |+| 6 | DGND | power_in | Digital ground. |+| 7 | XTO | output | Crystal oscillator output. |+| 8 | XTI | input | Crystal oscillator input, 6 MHz ±0.5% with 3.3-V CMOS level. |+| 9 | FL | passive | External low-pass filter pin for L-channel output, optional. |+| 10 | FR | passive | External low-pass filter pin for R-channel output, optional. |+| 11 | VCOM1 | power_out | Common mode voltage (VCCA/2) for ADC and DAC, requires capacitor decoupling to AGND. |+| 12 | VCOM2 | power_out | Common mode voltage (VCCA/2) for headphone amplifier, requires capacitor decoupling to AGND. |+| 13 | AGND | power_in | Analog ground. |+| 14 | NC | unconnected | Not connected. |+| 15 | VCCA | power_out | Analog power supply output, 3.3 V typical from internal regulator. |+| 16 | VIN | power_in | Microphone analog input, 0.43 to VCCA VPP centered at 0.5 VCCA. |+| 17 | MBIAS | output | Microphone bias output, 0.75 VCCA with 2 mA source current. |+| 18 | VOUTL | output | Left headphone output, 0.6 VCCA VPP at >10 kΩ or 0.55 VCCA VPP at 32 Ω load. |+| 19 | VCCL | power_out | Headphone L-channel power supply, 3.3 V typical from internal regulator. |+| 20 | HGND | power_in | Headphone amplifier ground. |+| 21 | VCCR | power_out | Headphone R-channel power supply, 3.3 V typical from internal regulator. |+| 22 | VOUTR | output | Right headphone output, 0.6 VCCA VPP at >10 kΩ or 0.55 VCCA VPP at 32 Ω load. |+| 23 | MAMP | input | Microphone amplifier gain select, 3.3-V CMOS (LOW = off, HIGH = +20 dB). |+| 24 | POWER | input | Power consumption declaration, 3.3-V CMOS (LOW = 100 mA, HIGH = 500 mA). |+| 25 | PGND | power_in | Microphone amplifier and PGA ground. |+| 26 | VCCP | power_out | PLL power supply, 3.3 V typical from internal regulator. |+| 27 | TEST1 | input | Test pin, 3.3-V CMOS level, must be set to HIGH. |+| 28 | TEST0 | input | Test pin, 3.3-V CMOS level, must be set to LOW. |+| 29 | SSPND | output | USB suspend status, 5-V tolerant open-drain (LOW = suspend, HIGH = operational). |+| 30 | MMUTE | input | Microphone mute control, 3.3-V CMOS with internal pulldown, active HIGH. |+| 31 | REC | output | Record status, 5-V tolerant open-drain (LOW = recording, FLASH = muted, HIGH = stopped). |+| 32 | PLAY | output | Playback status, 5-V tolerant open-drain (LOW = playing, FLASH = muted, HIGH = stopped). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TQFP-32(7x7) |+| Category | Interface |+| Pins | 32 |++## CAD (KiCad official)++- Symbol: `PCM2912APJTR`+- Footprint: `Package_QFP:TQFP-32_7x7mm_P0.8mm`+- 3D model: TQFP-32(7x7) (KiCad packages3D, STEP)+- 3D model files: `pcm2912apjtr-etched.step` / `pcm2912apjtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pcm2912apjtr.step` / `pcm2912apjtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/pcm2912a) (37 pp, sha256 `61d048c255190975`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pcm2912apjtr-datasheet.pdf)
page.jsonadded+285
@@ -0,0 +1,285 @@+{+  "slug": "pcm2912apjtr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Audio Interface ICs, TQFP-32(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "pcm2912apjtr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pcm2912apjtr.kicad_sym",+    "pcm2912apjtr.kicad_mod",+    "pcm2912apjtr.glb",+    "pcm2912apjtr.step",+    "pcm2912apjtr.lbr",+    "docs/hero.png",+    "docs/pcm2912apjtr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "PCM2912APJTR",+    "manufacturer": "Texas Instruments",+    "package": "TQFP-32(7x7)",+    "pin_count": 32,+    "category": "Interface",+    "subcategory": "Audio Interface ICs",+    "datasheet": "https://www.ti.com/cn/lit/gpn/pcm2912a",+    "parts": {+      "symbol": "pcm2912apjtr.kicad_sym",+      "footprint": "pcm2912apjtr.kicad_mod",+      "model_3d": "pcm2912apjtr-etched.glb",+      "model_3d_plain": "pcm2912apjtr.glb",+      "model_3d_step": "pcm2912apjtr-etched.step",+      "model_3d_step_plain": "pcm2912apjtr.step",+      "lbr": "pcm2912apjtr.lbr"+    },+    "distributor_links": {+      "lcsc": "C475497"+    },+    "pins": [+      {+        "number": "1",+        "name": "BGND",+        "type": "power_in",+        "description": "Reference ground for internal band-gap circuit."+      },+      {+        "number": "2",+        "name": "VBUS",+        "type": "power_in",+        "description": "USB power supply input, 4.35 to 5.25 V."+      },+      {+        "number": "3",+        "name": "D–",+        "type": "bidirectional",+        "description": "USB D- differential signal, LV-TTL level."+      },+      {+        "number": "4",+        "name": "D+",+        "type": "bidirectional",+        "description": "USB D+ differential signal, LV-TTL level."+      },+      {+        "number": "5",+        "name": "VDD",+        "type": "power_out",+        "description": "Digital power supply output, 3.3 V typical from internal regulator."+      },+      {+        "number": "6",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "7",+        "name": "XTO",+        "type": "output",+        "description": "Crystal oscillator output."+      },+      {+        "number": "8",+        "name": "XTI",+        "type": "input",+        "description": "Crystal oscillator input, 6 MHz ±0.5% with 3.3-V CMOS level."+      },+      {+        "number": "9",+        "name": "FL",+        "type": "passive",+        "description": "External low-pass filter pin for L-channel output, optional."+      },+      {+        "number": "10",+        "name": "FR",+        "type": "passive",+        "description": "External low-pass filter pin for R-channel output, optional."+      },+      {+        "number": "11",+        "name": "VCOM1",+        "type": "power_out",+        "description": "Common mode voltage (VCCA/2) for ADC and DAC, requires capacitor decoupling to AGND."+      },+      {+        "number": "12",+        "name": "VCOM2",+        "type": "power_out",+        "description": "Common mode voltage (VCCA/2) for headphone amplifier, requires capacitor decoupling to AGND."+      },+      {+        "number": "13",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground."+      },+      {+        "number": "14",+        "name": "NC",+        "type": "unconnected",+        "description": "Not connected."+      },+      {+        "number": "15",+        "name": "VCCA",+        "type": "power_out",+        "description": "Analog power supply output, 3.3 V typical from internal regulator."+      },+      {+        "number": "16",+        "name": "VIN",+        "type": "power_in",+        "description": "Microphone analog input, 0.43 to VCCA VPP centered at 0.5 VCCA."+      },+      {+        "number": "17",+        "name": "MBIAS",+        "type": "output",+        "description": "Microphone bias output, 0.75 VCCA with 2 mA source current."+      },+      {+        "number": "18",+        "name": "VOUTL",+        "type": "output",+        "description": "Left headphone output, 0.6 VCCA VPP at >10 kΩ or 0.55 VCCA VPP at 32 Ω load."+      },+      {+        "number": "19",+        "name": "VCCL",+        "type": "power_out",+        "description": "Headphone L-channel power supply, 3.3 V typical from internal regulator."+      },+      {+        "number": "20",+        "name": "HGND",+        "type": "power_in",+        "description": "Headphone amplifier ground."+      },+      {+        "number": "21",+        "name": "VCCR",+        "type": "power_out",+        "description": "Headphone R-channel power supply, 3.3 V typical from internal regulator."+      },+      {+        "number": "22",+        "name": "VOUTR",+        "type": "output",+        "description": "Right headphone output, 0.6 VCCA VPP at >10 kΩ or 0.55 VCCA VPP at 32 Ω load."+      },+      {+        "number": "23",+        "name": "MAMP",+        "type": "input",+        "description": "Microphone amplifier gain select, 3.3-V CMOS (LOW = off, HIGH = +20 dB)."+      },+      {+        "number": "24",+        "name": "POWER",+        "type": "input",+        "description": "Power consumption declaration, 3.3-V CMOS (LOW = 100 mA, HIGH = 500 mA)."+      },+      {+        "number": "25",+        "name": "PGND",+        "type": "power_in",+        "description": "Microphone amplifier and PGA ground."+      },+      {+        "number": "26",+        "name": "VCCP",+        "type": "power_out",+        "description": "PLL power supply, 3.3 V typical from internal regulator."+      },+      {+        "number": "27",+        "name": "TEST1",+        "type": "input",+        "description": "Test pin, 3.3-V CMOS level, must be set to HIGH."+      },+      {+        "number": "28",+        "name": "TEST0",+        "type": "input",+        "description": "Test pin, 3.3-V CMOS level, must be set to LOW."+      },+      {+        "number": "29",+        "name": "SSPND",+        "type": "output",+        "description": "USB suspend status, 5-V tolerant open-drain (LOW = suspend, HIGH = operational)."+      },+      {+        "number": "30",+        "name": "MMUTE",+        "type": "input",+        "description": "Microphone mute control, 3.3-V CMOS with internal pulldown, active HIGH."+      },+      {+        "number": "31",+        "name": "REC",+        "type": "output",+        "description": "Record status, 5-V tolerant open-drain (LOW = recording, FLASH = muted, HIGH = stopped)."+      },+      {+        "number": "32",+        "name": "PLAY",+        "type": "output",+        "description": "Playback status, 5-V tolerant open-drain (LOW = playing, FLASH = muted, HIGH = stopped)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 37,+        "cost_usd": 0.5179,+        "at": "2026-09-18T03:47:39"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/pcm2912a",+        "pages": 37,+        "sha256": "61d048c255190975",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 32,+        "described": 32,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file