← Commit history

Initial commit: component/pcm1794adbr

Ray ·7124e7fdbc ·
2 files changed +328
README.mdadded+65
@@ -0,0 +1,65 @@+# PCM1794ADBR++**Texas Instruments** · ADCs/DACs - Special Purpose · SSOP-28-208mil++PCM1794ADBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MONO | input | Monaural mode enable, Schmitt-trigger input, 5-V tolerant |+| 2 | CHSL | input | L-channel (LOW) or R-channel (HIGH) select, Schmitt-trigger input, 5-V tolerant |+| 3 | DEM | input | De-emphasis enable at 44.1 kHz sampling frequency, Schmitt-trigger input, 5-V tolerant |+| 4 | LRCK | input | Left and right clock (fS) serial interface input, Schmitt-trigger input, 5-V tolerant |+| 5 | DATA | input | Serial audio data input, clocked on BCK rising edge, Schmitt-trigger input, 5-V tolerant |+| 6 | BCK | input | Bit clock input for serial data shifting, Schmitt-trigger input, 5-V tolerant |+| 7 | SCK | input | System clock input for digital filter and DAC operation, Schmitt-trigger input, 5-V tolerant |+| 8 | DGND | power_in | Digital ground reference |+| 9 | VDD | power_in | Digital power supply, 3.3 V nominal |+| 10 | MUTE | input | Mute control input, HIGH transitions both outputs to bipolar zero level, Schmitt-trigger input, 5-V tolerant |+| 11 | FMT0 | input | Audio data format select bit 0 (with FMT1), Schmitt-trigger input, 5-V tolerant |+| 12 | FMT1 | input | Audio data format select bit 1 (with FMT0), Schmitt-trigger input, 5-V tolerant |+| 13 | ZERO | output | Zero flag output, goes HIGH when audio input data continuously zero for 1024 LRCKs in PCM mode |+| 14 | RST | input | External reset input, held LOW for minimum 20 ns to initialize device, Schmitt-trigger input, 5-V tolerant |+| 15 | VCC2R | power_in | Analog power supply for R-channel DAC, 5 V nominal |+| 16 | AGND3R | power_in | Analog ground reference for R-channel DAC |+| 17 | IOUTR+ | output | R-channel differential analog current output (positive leg), 7.8 mA peak-to-peak at full scale |+| 18 | IOUTR- | output | R-channel differential analog current output (negative leg), 7.8 mA peak-to-peak at full scale |+| 19 | AGND1 | power_in | Analog ground reference for internal bias circuits |+| 20 | IREF | passive | Output current reference bias pin used for setting DAC output current scale |+| 21 | VCOMR | passive | R-channel internal bias decoupling pin, requires external capacitive decoupling |+| 22 | VCOML | passive | L-channel internal bias decoupling pin, requires external capacitive decoupling |+| 23 | VCC1 | power_in | Analog power supply, 5 V nominal |+| 24 | AGND2 | power_in | Analog ground reference for internal bias circuits |+| 25 | IOUTL+ | output | L-channel differential analog current output (positive leg), 7.8 mA peak-to-peak at full scale |+| 26 | IOUTL- | output | L-channel differential analog current output (negative leg), 7.8 mA peak-to-peak at full scale |+| 27 | AGND3L | power_in | Analog ground reference for L-channel DAC |+| 28 | VCC2L | power_in | Analog power supply for L-channel DAC, 5 V nominal |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-28-208mil |+| Category | Data Acquisition |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `PCM1794ADBR`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)+- 3D model files: `pcm1794adbr-etched.step` / `pcm1794adbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pcm1794adbr.step` / `pcm1794adbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/pcm1794a) (35 pp, sha256 `69e6ff3f361007b3`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pcm1794adbr-datasheet.pdf)
page.jsonadded+263
@@ -0,0 +1,263 @@+{+  "slug": "pcm1794adbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments ADCs/DACs - Special Purpose, SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "pcm1794adbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pcm1794adbr.kicad_sym",+    "pcm1794adbr.kicad_mod",+    "pcm1794adbr.glb",+    "pcm1794adbr.step",+    "pcm1794adbr.lbr",+    "docs/hero.png",+    "docs/pcm1794adbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "PCM1794ADBR",+    "manufacturer": "Texas Instruments",+    "package": "SSOP-28-208mil",+    "pin_count": 28,+    "category": "Data Acquisition",+    "subcategory": "ADCs/DACs - Special Purpose",+    "datasheet": "https://www.ti.com/cn/lit/gpn/pcm1794a",+    "parts": {+      "symbol": "pcm1794adbr.kicad_sym",+      "footprint": "pcm1794adbr.kicad_mod",+      "model_3d": "pcm1794adbr-etched.glb",+      "model_3d_plain": "pcm1794adbr.glb",+      "model_3d_step": "pcm1794adbr-etched.step",+      "model_3d_step_plain": "pcm1794adbr.step",+      "lbr": "pcm1794adbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C783606"+    },+    "pins": [+      {+        "number": "1",+        "name": "MONO",+        "type": "input",+        "description": "Monaural mode enable, Schmitt-trigger input, 5-V tolerant"+      },+      {+        "number": "2",+        "name": "CHSL",+        "type": "input",+        "description": "L-channel (LOW) or R-channel (HIGH) select, Schmitt-trigger input, 5-V tolerant"+      },+      {+        "number": "3",+        "name": "DEM",+        "type": "input",+        "description": "De-emphasis enable at 44.1 kHz sampling frequency, Schmitt-trigger input, 5-V tolerant"+      },+      {+        "number": "4",+        "name": "LRCK",+        "type": "input",+        "description": "Left and right clock (fS) serial interface input, Schmitt-trigger input, 5-V tolerant"+      },+      {+        "number": "5",+        "name": "DATA",+        "type": "input",+        "description": "Serial audio data input, clocked on BCK rising edge, Schmitt-trigger input, 5-V tolerant"+      },+      {+        "number": "6",+        "name": "BCK",+        "type": "input",+        "description": "Bit clock input for serial data shifting, Schmitt-trigger input, 5-V tolerant"+      },+      {+        "number": "7",+        "name": "SCK",+        "type": "input",+        "description": "System clock input for digital filter and DAC operation, Schmitt-trigger input, 5-V tolerant"+      },+      {+        "number": "8",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground reference"+      },+      {+        "number": "9",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply, 3.3 V nominal"+      },+      {+        "number": "10",+        "name": "MUTE",+        "type": "input",+        "description": "Mute control input, HIGH transitions both outputs to bipolar zero level, Schmitt-trigger input, 5-V tolerant"+      },+      {+        "number": "11",+        "name": "FMT0",+        "type": "input",+        "description": "Audio data format select bit 0 (with FMT1), Schmitt-trigger input, 5-V tolerant"+      },+      {+        "number": "12",+        "name": "FMT1",+        "type": "input",+        "description": "Audio data format select bit 1 (with FMT0), Schmitt-trigger input, 5-V tolerant"+      },+      {+        "number": "13",+        "name": "ZERO",+        "type": "output",+        "description": "Zero flag output, goes HIGH when audio input data continuously zero for 1024 LRCKs in PCM mode"+      },+      {+        "number": "14",+        "name": "RST",+        "type": "input",+        "description": "External reset input, held LOW for minimum 20 ns to initialize device, Schmitt-trigger input, 5-V tolerant"+      },+      {+        "number": "15",+        "name": "VCC2R",+        "type": "power_in",+        "description": "Analog power supply for R-channel DAC, 5 V nominal"+      },+      {+        "number": "16",+        "name": "AGND3R",+        "type": "power_in",+        "description": "Analog ground reference for R-channel DAC"+      },+      {+        "number": "17",+        "name": "IOUTR+",+        "type": "output",+        "description": "R-channel differential analog current output (positive leg), 7.8 mA peak-to-peak at full scale"+      },+      {+        "number": "18",+        "name": "IOUTR–",+        "type": "output",+        "description": "R-channel differential analog current output (negative leg), 7.8 mA peak-to-peak at full scale"+      },+      {+        "number": "19",+        "name": "AGND1",+        "type": "power_in",+        "description": "Analog ground reference for internal bias circuits"+      },+      {+        "number": "20",+        "name": "IREF",+        "type": "passive",+        "description": "Output current reference bias pin used for setting DAC output current scale"+      },+      {+        "number": "21",+        "name": "VCOMR",+        "type": "passive",+        "description": "R-channel internal bias decoupling pin, requires external capacitive decoupling"+      },+      {+        "number": "22",+        "name": "VCOML",+        "type": "passive",+        "description": "L-channel internal bias decoupling pin, requires external capacitive decoupling"+      },+      {+        "number": "23",+        "name": "VCC1",+        "type": "power_in",+        "description": "Analog power supply, 5 V nominal"+      },+      {+        "number": "24",+        "name": "AGND2",+        "type": "power_in",+        "description": "Analog ground reference for internal bias circuits"+      },+      {+        "number": "25",+        "name": "IOUTL+",+        "type": "output",+        "description": "L-channel differential analog current output (positive leg), 7.8 mA peak-to-peak at full scale"+      },+      {+        "number": "26",+        "name": "IOUTL–",+        "type": "output",+        "description": "L-channel differential analog current output (negative leg), 7.8 mA peak-to-peak at full scale"+      },+      {+        "number": "27",+        "name": "AGND3L",+        "type": "power_in",+        "description": "Analog ground reference for L-channel DAC"+      },+      {+        "number": "28",+        "name": "VCC2L",+        "type": "power_in",+        "description": "Analog power supply for L-channel DAC, 5 V nominal"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: IREF and VCOML/VCOMR pins classified as passive based on descriptions as bias/decoupling pins; could"+        ],+        "pages_sent": 35,+        "cost_usd": 0.352,+        "at": "2026-09-23T12:50:17"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/pcm1794a",+        "pages": 35,+        "sha256": "69e6ff3f361007b3",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file