component
PCM1791ADBR
Public Made by Adomby adom
Texas Instruments ADCs/DACs - Special Purpose, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+64@@ -0,0 +1,64 @@+# PCM1791ADBR++**Texas Instruments** · ADCs/DACs - Special Purpose · SSOP-28++PCM1791ADBR from Texas Instruments, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | LRCK | input | Left and right clock (fS) input; Schmitt-trigger input, 5-V tolerant. |+| 2 | BCK | input | Bit clock input; Schmitt-trigger input, 5-V tolerant. |+| 3 | DATA | input | Serial audio data input; Schmitt-trigger input, 5-V tolerant. |+| 4 | MUTE | input | Analog output mute control; Schmitt-trigger input, 5-V tolerant. |+| 5 | SCK | input | System clock input; Schmitt-trigger input, 5-V tolerant. |+| 6 | RST | input | Reset; Schmitt-trigger input, 5-V tolerant. |+| 7 | VDD | power_in | Digital power supply, 3.3 V. |+| 8 | DGND | power_in | Digital ground. |+| 9 | AGNDF | power_in | Analog ground for DACFF. |+| 10 | VCCR | power_in | Analog power supply for R-channel I/V, 5 V. |+| 11 | AGNDR | power_in | Analog ground for R-channel I/V. |+| 12 | VOUTR− | output | R-channel analog voltage output −. |+| 13 | VOUTR+ | output | R-channel analog voltage output +. |+| 14 | VCOM | passive | Internal bias decoupling pin. |+| 15 | VCCC | power_in | Analog power supply for internal bias and current DAC, 5 V. |+| 16 | AGNDC | power_in | Analog ground for internal bias and current DAC. |+| 17 | VOUTL+ | output | L-channel analog voltage output +. |+| 18 | VOUTL− | output | L-channel analog voltage output −. |+| 19 | AGNDL | power_in | Analog ground for L-channel I/V. |+| 20 | VCCL | power_in | Analog power supply for L-channel I/V, 5 V. |+| 21 | VCCF | power_in | Analog power supply for DACFF, 5 V. |+| 22 | ZEROR | output | Zero flag for R-channel. |+| 23 | ZEROL | output | Zero flag for L-channel. |+| 24 | MSEL | input | I2C/SPI select; Schmitt-trigger input, 5-V tolerant. |+| 25 | MDO | tri_state | Mode control readback data output; 3-state output. |+| 26 | MDI | bidirectional | Mode control data input; Schmitt-trigger input and output with 5-V tolerant input, open-drain 3-state output in I2C mode, otherwise CMOS output. |+| 27 | MC | input | Mode control clock input; Schmitt-trigger input, 5-V tolerant. |+| 28 | MS | bidirectional | Mode control chip select input; Schmitt-trigger input and output with 5-V tolerant input and CMOS output. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-28 |+| Category | Data Acquisition |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `PCM1791ADBR`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28 (KiCad packages3D, STEP)+- 3D model files: `pcm1791adbr-etched.step` / `pcm1791adbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pcm1791adbr.step` / `pcm1791adbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/pcm1791a) (63 pp, sha256 `7f59e1288958b82d`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pcm1791adbr-datasheet.pdf)
page.jsonadded+319@@ -0,0 +1,319 @@+{+ "slug": "pcm1791adbr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments ADCs/DACs - Special Purpose, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "pcm1791adbr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "pcm1791adbr.kicad_sym",+ "pcm1791adbr.kicad_mod",+ "pcm1791adbr.glb",+ "pcm1791adbr.step",+ "pcm1791adbr.lbr",+ "docs/hero.png",+ "docs/pcm1791adbr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "pcm1791adbr-hero.glb",+ "pcm1791adbr-hero.overlay.json"+ ],+ "component": {+ "mpn": "PCM1791ADBR",+ "manufacturer": "Texas Instruments",+ "package": "SSOP-28",+ "pin_count": 28,+ "category": "Data Acquisition",+ "subcategory": "ADCs/DACs - Special Purpose",+ "datasheet": "https://www.ti.com/cn/lit/gpn/pcm1791a",+ "parts": {+ "symbol": "pcm1791adbr.kicad_sym",+ "footprint": "pcm1791adbr.kicad_mod",+ "model_3d": "pcm1791adbr-hero.glb",+ "model_3d_plain": "pcm1791adbr.glb",+ "model_3d_step": "pcm1791adbr-etched.step",+ "model_3d_step_plain": "pcm1791adbr.step",+ "lbr": "pcm1791adbr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2651630",+ "digikey": "296-41375-2-ND",+ "mouser": "595-PCM1791ADBR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T15:45:24Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-41375-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-PCM1791ADBR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "LRCK",+ "type": "input",+ "description": "Left and right clock (fS) input; Schmitt-trigger input, 5-V tolerant."+ },+ {+ "number": "2",+ "name": "BCK",+ "type": "input",+ "description": "Bit clock input; Schmitt-trigger input, 5-V tolerant."+ },+ {+ "number": "3",+ "name": "DATA",+ "type": "input",+ "description": "Serial audio data input; Schmitt-trigger input, 5-V tolerant."+ },+ {+ "number": "4",+ "name": "MUTE",+ "type": "input",+ "description": "Analog output mute control; Schmitt-trigger input, 5-V tolerant."+ },+ {+ "number": "5",+ "name": "SCK",+ "type": "input",+ "description": "System clock input; Schmitt-trigger input, 5-V tolerant."+ },+ {+ "number": "6",+ "name": "RST",+ "type": "input",+ "description": "Reset; Schmitt-trigger input, 5-V tolerant."+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply, 3.3 V."+ },+ {+ "number": "8",+ "name": "DGND",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "9",+ "name": "AGNDF",+ "type": "power_in",+ "description": "Analog ground for DACFF."+ },+ {+ "number": "10",+ "name": "VCCR",+ "type": "power_in",+ "description": "Analog power supply for R-channel I/V, 5 V."+ },+ {+ "number": "11",+ "name": "AGNDR",+ "type": "power_in",+ "description": "Analog ground for R-channel I/V."+ },+ {+ "number": "12",+ "name": "VOUTR−",+ "type": "output",+ "description": "R-channel analog voltage output −."+ },+ {+ "number": "13",+ "name": "VOUTR+",+ "type": "output",+ "description": "R-channel analog voltage output +."+ },+ {+ "number": "14",+ "name": "VCOM",+ "type": "passive",+ "description": "Internal bias decoupling pin."+ },+ {+ "number": "15",+ "name": "VCCC",+ "type": "power_in",+ "description": "Analog power supply for internal bias and current DAC, 5 V."+ },+ {+ "number": "16",+ "name": "AGNDC",+ "type": "power_in",+ "description": "Analog ground for internal bias and current DAC."+ },+ {+ "number": "17",+ "name": "VOUTL+",+ "type": "output",+ "description": "L-channel analog voltage output +."+ },+ {+ "number": "18",+ "name": "VOUTL−",+ "type": "output",+ "description": "L-channel analog voltage output −."+ },+ {+ "number": "19",+ "name": "AGNDL",+ "type": "power_in",+ "description": "Analog ground for L-channel I/V."+ },+ {+ "number": "20",+ "name": "VCCL",+ "type": "power_in",+ "description": "Analog power supply for L-channel I/V, 5 V."+ },+ {+ "number": "21",+ "name": "VCCF",+ "type": "power_in",+ "description": "Analog power supply for DACFF, 5 V."+ },+ {+ "number": "22",+ "name": "ZEROR",+ "type": "output",+ "description": "Zero flag for R-channel."+ },+ {+ "number": "23",+ "name": "ZEROL",+ "type": "output",+ "description": "Zero flag for L-channel."+ },+ {+ "number": "24",+ "name": "MSEL",+ "type": "input",+ "description": "I2C/SPI select; Schmitt-trigger input, 5-V tolerant."+ },+ {+ "number": "25",+ "name": "MDO",+ "type": "tri_state",+ "description": "Mode control readback data output; 3-state output."+ },+ {+ "number": "26",+ "name": "MDI",+ "type": "bidirectional",+ "description": "Mode control data input; Schmitt-trigger input and output with 5-V tolerant input, open-drain 3-state output in I2C mode, otherwise CMOS output."+ },+ {+ "number": "27",+ "name": "MC",+ "type": "input",+ "description": "Mode control clock input; Schmitt-trigger input, 5-V tolerant."+ },+ {+ "number": "28",+ "name": "MS",+ "type": "bidirectional",+ "description": "Mode control chip select input; Schmitt-trigger input and output with 5-V tolerant input and CMOS output."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The page 5 pin diagram text is scrambled by extraction, so the pin-to-number mapping was taken from ; VCOM is listed only as an internal bias decoupling pin with no I/O type given; typed as passive. Con; Datasheet footnote 3 calls MDO a 3-state output with no further drive detail; typed as tri_state."+ ],+ "pages_sent": 16,+ "cost_usd": 0.0839,+ "at": "2026-10-08T15:44:59"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/pcm1791a",+ "pages": 63,+ "sha256": "7f59e1288958b82d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 28,+ "described": 28,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "pcm1791adbr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 10.2,+ 2.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "pcm1791adbr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 10.2,+ 2.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "dcd867fccc2a270e47c16f523909b1517ad1fb4c56ae4149bdf12b1f3029cc2c",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}