← Commit history

Initial commit: component/pcm1789pwr

Ray ·72b6b02236 ·
2 files changed +311
README.mdadded+60
@@ -0,0 +1,60 @@+# PCM1789PWR++**Texas Instruments** · ADCs/DACs - Special Purpose · TSSOP-24++PCM1789PWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | LRCK | input | Audio data word clock input |+| 2 | BCK | input | Audio data bit clock input |+| 3 | DIN | input | Audio data input |+| 4 | RST | input | Reset and power-down control input with active low logic |+| 5 | SCKI | input | System clock input from 2.048 MHz to 36.864 MHz |+| 6 | VDD | power_in | Digital power supply, +3.3 V nominal |+| 7 | DGND | power_in | Digital ground |+| 8 | VCC1 | power_in | Analog power supply 1, +5 V nominal |+| 9 | VCOM | output | Analog common-mode voltage output biased to 0.5 × VCC1 with 7.5 kΩ impedance and ±1 μA source/sink current |+| 10 | AGND1 | power_in | Analog ground 1 |+| 11 | VOUTL- | output | Negative analog output from DAC left channel, ±8 VPP differential into 5 kΩ ac-coupled or 15 kΩ dc-coupled load |+| 12 | VOUTL+ | output | Positive analog output from DAC left channel, ±8 VPP differential into 5 kΩ ac-coupled or 15 kΩ dc-coupled load |+| 13 | VOUTR+ | output | Positive analog output from DAC right channel, ±8 VPP differential into 5 kΩ ac-coupled or 15 kΩ dc-coupled load |+| 14 | VOUTR- | output | Negative analog output from DAC right channel, ±8 VPP differential into 5 kΩ ac-coupled or 15 kΩ dc-coupled load |+| 15 | AGND2 | power_in | Analog ground 2 |+| 16 | VCC2 | power_in | Analog power supply 2, +5 V nominal |+| 17 | AMUTEI | input | Analog mute control input with active low logic |+| 18 | ZERO2/AMUTEO | output | Zero detect flag output 2 or analog mute control output in open-drain configuration with active low logic, selectable via MZSEL register bit |+| 19 | ZERO1 | output | Zero detect flag output 1 with configurable active high or low polarity via ZREV register bit |+| 20 | MODE | input | Control port mode selection pin: tied to VDD for SPI with ADR6=1, pulled up to VDD for SPI with ADR6=0, pulled down to GND for hardware auto mode, or tied to GND for I2C |+| 21 | MD/SDA/DEMP | bidirectional | Serial data input for SPI mode, open-drain data line for I2C mode, or de-emphasis control input for hardware mode |+| 22 | MC/SCL/FMT | input | Serial clock input for SPI mode, clock line for I2C mode, or audio format select input for hardware mode |+| 23 | MS/ADR0/RSV | input | Chip select for SPI mode, address select bit 0 for I2C mode, or reserved input for hardware mode (set low) |+| 24 | ADR5/ADR1/RSV | input | Address select bit 5 for SPI mode, address select bit 1 for I2C mode, or reserved input for hardware mode (set low) |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-24 |+| Category | Data Acquisition |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `PCM1789PWR`+- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`+- 3D model: TSSOP-24 (KiCad packages3D, STEP)+- 3D model files: `pcm1789pwr-etched.step` / `pcm1789pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pcm1789pwr.step` / `pcm1789pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pcm1789.pdf) (43 pp, sha256 `2265fea2541a26cc`, retrieved 2026-09-26, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pcm1789pwr-datasheet.pdf)
page.jsonadded+251
@@ -0,0 +1,251 @@+{+  "slug": "pcm1789pwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments ADCs/DACs - Special Purpose, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "pcm1789pwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pcm1789pwr.kicad_sym",+    "pcm1789pwr.kicad_mod",+    "pcm1789pwr.glb",+    "pcm1789pwr.step",+    "pcm1789pwr.lbr",+    "docs/hero.png",+    "docs/pcm1789pwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "PCM1789PWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-24",+    "pin_count": 24,+    "category": "Data Acquisition",+    "subcategory": "ADCs/DACs - Special Purpose",+    "datasheet": "https://www.ti.com/lit/ds/symlink/pcm1789.pdf",+    "parts": {+      "symbol": "pcm1789pwr.kicad_sym",+      "footprint": "pcm1789pwr.kicad_mod",+      "model_3d": "pcm1789pwr-etched.glb",+      "model_3d_plain": "pcm1789pwr.glb",+      "model_3d_step": "pcm1789pwr-etched.step",+      "model_3d_step_plain": "pcm1789pwr.step",+      "lbr": "pcm1789pwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C962089",+      "digikey": "296-41374-2-ND",+      "mouser": "595-PCM1789PWR"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T21:55:56Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-41374-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-PCM1789PWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "LRCK",+        "type": "input",+        "description": "Audio data word clock input"+      },+      {+        "number": "2",+        "name": "BCK",+        "type": "input",+        "description": "Audio data bit clock input"+      },+      {+        "number": "3",+        "name": "DIN",+        "type": "input",+        "description": "Audio data input"+      },+      {+        "number": "4",+        "name": "RST",+        "type": "input",+        "description": "Reset and power-down control input with active low logic"+      },+      {+        "number": "5",+        "name": "SCKI",+        "type": "input",+        "description": "System clock input from 2.048 MHz to 36.864 MHz"+      },+      {+        "number": "6",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply, +3.3 V nominal"+      },+      {+        "number": "7",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground"+      },+      {+        "number": "8",+        "name": "VCC1",+        "type": "power_in",+        "description": "Analog power supply 1, +5 V nominal"+      },+      {+        "number": "9",+        "name": "VCOM",+        "type": "output",+        "description": "Analog common-mode voltage output biased to 0.5 × VCC1 with 7.5 kΩ impedance and ±1 μA source/sink current"+      },+      {+        "number": "10",+        "name": "AGND1",+        "type": "power_in",+        "description": "Analog ground 1"+      },+      {+        "number": "11",+        "name": "VOUTL–",+        "type": "output",+        "description": "Negative analog output from DAC left channel, ±8 VPP differential into 5 kΩ ac-coupled or 15 kΩ dc-coupled load"+      },+      {+        "number": "12",+        "name": "VOUTL+",+        "type": "output",+        "description": "Positive analog output from DAC left channel, ±8 VPP differential into 5 kΩ ac-coupled or 15 kΩ dc-coupled load"+      },+      {+        "number": "13",+        "name": "VOUTR+",+        "type": "output",+        "description": "Positive analog output from DAC right channel, ±8 VPP differential into 5 kΩ ac-coupled or 15 kΩ dc-coupled load"+      },+      {+        "number": "14",+        "name": "VOUTR–",+        "type": "output",+        "description": "Negative analog output from DAC right channel, ±8 VPP differential into 5 kΩ ac-coupled or 15 kΩ dc-coupled load"+      },+      {+        "number": "15",+        "name": "AGND2",+        "type": "power_in",+        "description": "Analog ground 2"+      },+      {+        "number": "16",+        "name": "VCC2",+        "type": "power_in",+        "description": "Analog power supply 2, +5 V nominal"+      },+      {+        "number": "17",+        "name": "AMUTEI",+        "type": "input",+        "description": "Analog mute control input with active low logic"+      },+      {+        "number": "18",+        "name": "ZERO2/AMUTEO",+        "type": "output",+        "description": "Zero detect flag output 2 or analog mute control output in open-drain configuration with active low logic, selectable via MZSEL register bit"+      },+      {+        "number": "19",+        "name": "ZERO1",+        "type": "output",+        "description": "Zero detect flag output 1 with configurable active high or low polarity via ZREV register bit"+      },+      {+        "number": "20",+        "name": "MODE",+        "type": "input",+        "description": "Control port mode selection pin: tied to VDD for SPI with ADR6=1, pulled up to VDD for SPI with ADR6=0, pulled down to GND for hardware auto mode, or tied to GND for I2C"+      },+      {+        "number": "21",+        "name": "MD/SDA/DEMP",+        "type": "bidirectional",+        "description": "Serial data input for SPI mode, open-drain data line for I2C mode, or de-emphasis control input for hardware mode"+      },+      {+        "number": "22",+        "name": "MC/SCL/FMT",+        "type": "input",+        "description": "Serial clock input for SPI mode, clock line for I2C mode, or audio format select input for hardware mode"+      },+      {+        "number": "23",+        "name": "MS/ADR0/RSV",+        "type": "input",+        "description": "Chip select for SPI mode, address select bit 0 for I2C mode, or reserved input for hardware mode (set low)"+      },+      {+        "number": "24",+        "name": "ADR5/ADR1/RSV",+        "type": "input",+        "description": "Address select bit 5 for SPI mode, address select bit 1 for I2C mode, or reserved input for hardware mode (set low)"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 43,+        "cost_usd": 0.4144,+        "at": "2026-09-26T21:55:35"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/pcm1789.pdf",+        "pages": 43,+        "sha256": "2265fea2541a26cc",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file