← Commit history

Initial commit: component/pcf8575pwr

Ray ·a350f3b958 ·
2 files changed +312
README.mdadded+60
@@ -0,0 +1,60 @@+# PCF8575PWR++**Texas Instruments** · I/O Expanders · TSSOP-24++PCF8575PWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INT | output | Interrupt output. Connect to VCC through a pull-up resistor. |+| 2 | A1 | input | Address input 1. Connect directly to VCC or ground. Pull-up resistors are not needed. |+| 3 | A2 | input | Address input 2. Connect directly to VCC or ground. Pull-up resistors are not needed. |+| 4 | P00 | bidirectional | P-port input/output. Push-pull design structure. |+| 5 | P01 | bidirectional | P-port input/output. Push-pull design structure. |+| 6 | P02 | bidirectional | P-port input/output. Push-pull design structure. |+| 7 | P03 | bidirectional | P-port input/output. Push-pull design structure. |+| 8 | P04 | bidirectional | P-port input/output. Push-pull design structure. |+| 9 | P05 | bidirectional | P-port input/output. Push-pull design structure. |+| 10 | P06 | bidirectional | P-port input/output. Push-pull design structure. |+| 11 | P07 | bidirectional | P-port input/output. Push-pull design structure. |+| 12 | GND | power_in | Ground. |+| 13 | P10 | bidirectional | P-port input/output. Push-pull design structure. |+| 14 | P11 | bidirectional | P-port input/output. Push-pull design structure. |+| 15 | P12 | bidirectional | P-port input/output. Push-pull design structure. |+| 16 | P13 | bidirectional | P-port input/output. Push-pull design structure. |+| 17 | P14 | bidirectional | P-port input/output. Push-pull design structure. |+| 18 | P15 | bidirectional | P-port input/output. Push-pull design structure. |+| 19 | P16 | bidirectional | P-port input/output. Push-pull design structure. |+| 20 | P17 | bidirectional | P-port input/output. Push-pull design structure. |+| 21 | A0 | input | Address input 0. Connect directly to VCC or ground. Pull-up resistors are not needed. |+| 22 | SCL | input | Serial clock line. Connect to VCC through a pull-up resistor. |+| 23 | SDA | bidirectional | Serial data line. Connect to VCC through a pull-up resistor. |+| 24 | VCC | power_out | Supply voltage. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-24 |+| Category | Interface |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `PCF8575PWR`+- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`+- 3D model: TSSOP-24 (KiCad packages3D, STEP)+- 3D model files: `pcf8575pwr-etched.step` / `pcf8575pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pcf8575pwr.step` / `pcf8575pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pcf8575.pdf) (44 pp, sha256 `a3f71155a81f9da5`, retrieved 2026-10-01, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pcf8575pwr-datasheet.pdf)
page.jsonadded+252
@@ -0,0 +1,252 @@+{+  "slug": "pcf8575pwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments I/O Expanders, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "pcf8575pwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pcf8575pwr.kicad_sym",+    "pcf8575pwr.kicad_mod",+    "pcf8575pwr.glb",+    "pcf8575pwr.step",+    "pcf8575pwr.lbr",+    "docs/hero.png",+    "docs/pcf8575pwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "PCF8575PWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-24",+    "pin_count": 24,+    "category": "Interface",+    "subcategory": "I/O Expanders",+    "datasheet": "https://www.ti.com/lit/ds/symlink/pcf8575.pdf",+    "parts": {+      "symbol": "pcf8575pwr.kicad_sym",+      "footprint": "pcf8575pwr.kicad_mod",+      "model_3d": "pcf8575pwr-etched.glb",+      "model_3d_plain": "pcf8575pwr.glb",+      "model_3d_step": "pcf8575pwr-etched.step",+      "model_3d_step_plain": "pcf8575pwr.step",+      "lbr": "pcf8575pwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2652277",+      "digikey": "296-17807-2-ND",+      "mouser": "595-PCF8575PWR"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T08:00:04Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-17807-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-PCF8575PWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "INT",+        "type": "output",+        "description": "Interrupt output. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "2",+        "name": "A1",+        "type": "input",+        "description": "Address input 1. Connect directly to VCC or ground. Pull-up resistors are not needed."+      },+      {+        "number": "3",+        "name": "A2",+        "type": "input",+        "description": "Address input 2. Connect directly to VCC or ground. Pull-up resistors are not needed."+      },+      {+        "number": "4",+        "name": "P00",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "5",+        "name": "P01",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "6",+        "name": "P02",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "7",+        "name": "P03",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "8",+        "name": "P04",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "9",+        "name": "P05",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "10",+        "name": "P06",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "11",+        "name": "P07",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "12",+        "name": "GND",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "13",+        "name": "P10",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "14",+        "name": "P11",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "15",+        "name": "P12",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "16",+        "name": "P13",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "17",+        "name": "P14",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "18",+        "name": "P15",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "19",+        "name": "P16",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "20",+        "name": "P17",+        "type": "bidirectional",+        "description": "P-port input/output. Push-pull design structure."+      },+      {+        "number": "21",+        "name": "A0",+        "type": "input",+        "description": "Address input 0. Connect directly to VCC or ground. Pull-up resistors are not needed."+      },+      {+        "number": "22",+        "name": "SCL",+        "type": "input",+        "description": "Serial clock line. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "23",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial data line. Connect to VCC through a pull-up resistor."+      },+      {+        "number": "24",+        "name": "VCC",+        "type": "power_out",+        "description": "Supply voltage."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 8,+        "cost_usd": 0.0846,+        "at": "2026-10-01T07:59:47"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/pcf8575.pdf",+        "pages": 44,+        "sha256": "a3f71155a81f9da5",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file