← Commit history

Initial commit: component/pcf8574apwr

Ray ·c14534ee99 ·
2 files changed +279
README.mdadded+57
@@ -0,0 +1,57 @@+# PCF8574APWR++**Texas Instruments** · I/O Expanders · ETSSOP-20++PCF8574APWR from Texas Instruments, in a ETSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INT | output | Open-drain interrupt output, connect through pullup resistor to VCC, asserted on rising or falling edge of port inputs. |+| 2 | SCL | input | Serial clock input for I2C interface, connect through pullup resistor to VCC. |+| 3 | NC | unconnected | Do not connect. |+| 4 | SDA | bidirectional | Serial data line for I2C interface, connect through pullup resistor to VCC. |+| 5 | VCC | power_in | Positive power supply voltage, 2.5V to 6V. |+| 6 | A0 | input | Address input 0, connect directly to VCC or ground, pullup resistors not needed. |+| 7 | A1 | input | Address input 1, connect directly to VCC or ground, pullup resistors not needed. |+| 8 | NC | unconnected | Do not connect. |+| 9 | A2 | input | Address input 2, connect directly to VCC or ground, pullup resistors not needed. |+| 10 | P0 | bidirectional | Quasi-bidirectional I/O port 0 with push-pull high-current drive capability suitable for directly driving LEDs. |+| 11 | P1 | bidirectional | Quasi-bidirectional I/O port 1 with push-pull high-current drive capability suitable for directly driving LEDs. |+| 12 | P2 | bidirectional | Quasi-bidirectional I/O port 2 with push-pull high-current drive capability suitable for directly driving LEDs. |+| 13 | NC | unconnected | Do not connect. |+| 14 | P3 | bidirectional | Quasi-bidirectional I/O port 3 with push-pull high-current drive capability suitable for directly driving LEDs. |+| 15 | GND | power_in | Ground reference. |+| 16 | P4 | bidirectional | Quasi-bidirectional I/O port 4 with push-pull high-current drive capability suitable for directly driving LEDs. |+| 17 | P5 | bidirectional | Quasi-bidirectional I/O port 5 with push-pull high-current drive capability suitable for directly driving LEDs. |+| 18 | NC | unconnected | Do not connect. |+| 19 | P6 | bidirectional | Quasi-bidirectional I/O port 6 with push-pull high-current drive capability suitable for directly driving LEDs. |+| 20 | P7 | bidirectional | Quasi-bidirectional I/O port 7 with push-pull high-current drive capability suitable for directly driving LEDs. |+| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | ETSSOP-20 |+| Category | Interface |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `PCF8574APWR`+- Footprint: `Package_SO:ETSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3x4.2mm`+- 3D model: ETSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `pcf8574apwr-etched.step` / `pcf8574apwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pcf8574apwr.step` / `pcf8574apwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pcf8574a.pdf) (36 pp, sha256 `d16c2f223be49bd7`, retrieved 2026-09-17, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pcf8574apwr-datasheet.pdf)
page.jsonadded+222
@@ -0,0 +1,222 @@+{+  "slug": "pcf8574apwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments I/O Expanders, ETSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "pcf8574apwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pcf8574apwr.kicad_sym",+    "pcf8574apwr.kicad_mod",+    "pcf8574apwr.glb",+    "pcf8574apwr.step",+    "pcf8574apwr.lbr",+    "docs/hero.png",+    "docs/pcf8574apwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "PCF8574APWR",+    "manufacturer": "Texas Instruments",+    "package": "ETSSOP-20",+    "pin_count": 21,+    "category": "Interface",+    "subcategory": "I/O Expanders",+    "datasheet": "https://www.ti.com/lit/ds/symlink/pcf8574a.pdf",+    "parts": {+      "symbol": "pcf8574apwr.kicad_sym",+      "footprint": "pcf8574apwr.kicad_mod",+      "model_3d": "pcf8574apwr-etched.glb",+      "model_3d_plain": "pcf8574apwr.glb",+      "model_3d_step": "pcf8574apwr-etched.step",+      "model_3d_step_plain": "pcf8574apwr.step",+      "lbr": "pcf8574apwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C94361"+    },+    "pins": [+      {+        "number": "1",+        "name": "INT",+        "type": "output",+        "description": "Open-drain interrupt output, connect through pullup resistor to VCC, asserted on rising or falling edge of port inputs."+      },+      {+        "number": "2",+        "name": "SCL",+        "type": "input",+        "description": "Serial clock input for I2C interface, connect through pullup resistor to VCC."+      },+      {+        "number": "3",+        "name": "NC",+        "type": "unconnected",+        "description": "Do not connect."+      },+      {+        "number": "4",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial data line for I2C interface, connect through pullup resistor to VCC."+      },+      {+        "number": "5",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive power supply voltage, 2.5V to 6V."+      },+      {+        "number": "6",+        "name": "A0",+        "type": "input",+        "description": "Address input 0, connect directly to VCC or ground, pullup resistors not needed."+      },+      {+        "number": "7",+        "name": "A1",+        "type": "input",+        "description": "Address input 1, connect directly to VCC or ground, pullup resistors not needed."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "Do not connect."+      },+      {+        "number": "9",+        "name": "A2",+        "type": "input",+        "description": "Address input 2, connect directly to VCC or ground, pullup resistors not needed."+      },+      {+        "number": "10",+        "name": "P0",+        "type": "bidirectional",+        "description": "Quasi-bidirectional I/O port 0 with push-pull high-current drive capability suitable for directly driving LEDs."+      },+      {+        "number": "11",+        "name": "P1",+        "type": "bidirectional",+        "description": "Quasi-bidirectional I/O port 1 with push-pull high-current drive capability suitable for directly driving LEDs."+      },+      {+        "number": "12",+        "name": "P2",+        "type": "bidirectional",+        "description": "Quasi-bidirectional I/O port 2 with push-pull high-current drive capability suitable for directly driving LEDs."+      },+      {+        "number": "13",+        "name": "NC",+        "type": "unconnected",+        "description": "Do not connect."+      },+      {+        "number": "14",+        "name": "P3",+        "type": "bidirectional",+        "description": "Quasi-bidirectional I/O port 3 with push-pull high-current drive capability suitable for directly driving LEDs."+      },+      {+        "number": "15",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference."+      },+      {+        "number": "16",+        "name": "P4",+        "type": "bidirectional",+        "description": "Quasi-bidirectional I/O port 4 with push-pull high-current drive capability suitable for directly driving LEDs."+      },+      {+        "number": "17",+        "name": "P5",+        "type": "bidirectional",+        "description": "Quasi-bidirectional I/O port 5 with push-pull high-current drive capability suitable for directly driving LEDs."+      },+      {+        "number": "18",+        "name": "NC",+        "type": "unconnected",+        "description": "Do not connect."+      },+      {+        "number": "19",+        "name": "P6",+        "type": "bidirectional",+        "description": "Quasi-bidirectional I/O port 6 with push-pull high-current drive capability suitable for directly driving LEDs."+      },+      {+        "number": "20",+        "name": "P7",+        "type": "bidirectional",+        "description": "Quasi-bidirectional I/O port 7 with push-pull high-current drive capability suitable for directly driving LEDs."+      },+      {+        "number": "21",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Package hint provided as 'ETSSOP-20' but datasheet orderable part table (page 24) identifies PCF8574",+          "exposed pad 21 added from the footprint"+        ],+        "pages_sent": 36,+        "cost_usd": 0.3005,+        "at": "2026-09-17T23:48:09"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/pcf8574a.pdf",+        "pages": 36,+        "sha256": "d16c2f223be49bd7",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 21,+        "described": 21,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file