← Commit history

Publish 0.2.1

Ray ·29c8ccb1e3 · ·parent a9b0343
4 files changed +868−11
package.json+247−4
@@ -1,6 +1,6 @@ {   "slug": "pca9555pwr",-  "version": "0.2.0",+  "version": "0.2.1",   "type": "component",   "description": "Texas Instruments I/O Expanders, TSSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -20,10 +20,253 @@     "pca9555pwr.kicad_mod",     "pca9555pwr.glb",     "pca9555pwr.step",+    "pca9555pwr-etched.step",     "pca9555pwr.lbr",     "docs/hero.png",     "docs/pca9555pwr-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "pca9555pwr-hero.glb",+    "pca9555pwr-hero.overlay.json"+  ],+  "component": {+    "mpn": "PCA9555PWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-24",+    "pin_count": 24,+    "category": "Comm/UART",+    "subcategory": "I/O Expanders",+    "datasheet": "https://www.ti.com/lit/ds/symlink/pca9555.pdf",+    "parts": {+      "symbol": "pca9555pwr.kicad_sym",+      "footprint": "pca9555pwr.kicad_mod",+      "model_3d": "pca9555pwr-hero.glb",+      "model_3d_plain": "pca9555pwr.glb",+      "model_3d_step": "pca9555pwr-etched.step",+      "model_3d_step_plain": "pca9555pwr.step",+      "lbr": "pca9555pwr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "INT",+        "type": "output",+        "description": "Active-low, open-drain interrupt output. Asserted on any input-port state change; connect to VCC through a pull-up resistor."+      },+      {+        "number": "2",+        "name": "A1",+        "type": "input",+        "description": "I2C hardware address input bit 1. Tie directly to VCC or GND to set the device's I2C slave address."+      },+      {+        "number": "3",+        "name": "A2",+        "type": "input",+        "description": "I2C hardware address input bit 2. Tie directly to VCC or GND to set the device's I2C slave address."+      },+      {+        "number": "4",+        "name": "P00",+        "type": "bidirectional",+        "description": "Port 0 bit 0, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "5",+        "name": "P01",+        "type": "bidirectional",+        "description": "Port 0 bit 1, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "6",+        "name": "P02",+        "type": "bidirectional",+        "description": "Port 0 bit 2, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "7",+        "name": "P03",+        "type": "bidirectional",+        "description": "Port 0 bit 3, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "8",+        "name": "P04",+        "type": "bidirectional",+        "description": "Port 0 bit 4, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "9",+        "name": "P05",+        "type": "bidirectional",+        "description": "Port 0 bit 5, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "10",+        "name": "P06",+        "type": "bidirectional",+        "description": "Port 0 bit 6, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "11",+        "name": "P07",+        "type": "bidirectional",+        "description": "Port 0 bit 7, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "12",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground return."+      },+      {+        "number": "13",+        "name": "P10",+        "type": "bidirectional",+        "description": "Port 1 bit 0, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "14",+        "name": "P11",+        "type": "bidirectional",+        "description": "Port 1 bit 1, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "15",+        "name": "P12",+        "type": "bidirectional",+        "description": "Port 1 bit 2, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "16",+        "name": "P13",+        "type": "bidirectional",+        "description": "Port 1 bit 3, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "17",+        "name": "P14",+        "type": "bidirectional",+        "description": "Port 1 bit 4, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "18",+        "name": "P15",+        "type": "bidirectional",+        "description": "Port 1 bit 5, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "19",+        "name": "P16",+        "type": "bidirectional",+        "description": "Port 1 bit 6, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "20",+        "name": "P17",+        "type": "bidirectional",+        "description": "Port 1 bit 7, push-pull general-purpose I/O. IOL = 25 mA max sink, IOH = -10 mA max source. Defaults to input at power-on."+      },+      {+        "number": "21",+        "name": "A0",+        "type": "input",+        "description": "I2C hardware address input bit 0. Tie directly to VCC or GND to set the device's I2C slave address."+      },+      {+        "number": "22",+        "name": "SCL",+        "type": "input",+        "description": "I2C serial clock (400 kHz Fast-mode). Open-drain bus line; connect to VCC through a pull-up resistor."+      },+      {+        "number": "23",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C serial data (400 kHz Fast-mode). Open-drain bus line; connect to VCC through a pull-up resistor."+      },+      {+        "number": "24",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage, 2.3 V to 5.5 V. Decouple to GND with a local bypass capacitor."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/pca9555.pdf",+        "pages": 49,+        "sha256": "9b5cc24c3c9e286a",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "pca9555pwr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          7.8,+          0.97+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "706322f42d9793ebf28d5b80100a68bfa8769998a00b78acadf7af937fc1454f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "pca9555pwr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          7.8,+          0.97+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "b5f1a9a17251a5fdb93a284ca4ab787419014f64205ad153f5aed939e195a07d",+        "checked": "2026-10-26",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "title": "PCA9555PWR",+  "brief": "Texas Instruments I/O Expanders, TSSOP-24. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "Texas Instruments",+      "Package": "TSSOP-24",+      "Category": "Comm/UART",+      "Pins": "24"+    }+  },+  "discovery_triggers": [+    "pca9555pwr"+  ],+  "discovery_pitch": "PCA9555PWR (Texas Instruments) component page with datasheet-verified CAD.",+  "visibility": "public"+}
page.json+9−7
@@ -4,7 +4,7 @@   "slug": "pca9555pwr",   "title": "PCA9555PWR",   "brief": "Texas Instruments I/O Expanders, TSSOP-24. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.2.0",+  "version": "0.2.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -275,11 +275,11 @@     "docs/hero.png",     "docs/pca9555pwr-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "pca9555pwr-hero.glb",+    "pca9555pwr-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },+  "visibility": "public",   "variants": [     {       "mpn": "PCA9555PWR",@@ -326,5 +326,7 @@       "kind": "packaging"     }   ],-  "updated_at": "2026-09-25T04:09:29.574Z"-}+  "updated_at": "2026-09-25T04:09:29.574Z",+  "description": "Texas Instruments I/O Expanders, TSSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
pca9555pwr-hero.glbadded
⋯ 1 unchanged line ⋯
pca9555pwr-hero.overlay.jsonadded+612
@@ -0,0 +1,612 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "PCA9555PWR",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 24,+      "span_mm": 7.55,+      "dash_mm": 0.1888,+      "gap_mm": 0.1133,+      "pad_stroke_mm": 0.0453+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 3,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 24,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.604,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.2,+      3.2,+      -3.705,+      3.705+    ],+    "pads_bbox_mm": [+      -3.6,+      3.6,+      -3.775,+      3.775+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "pca9555pwr-etched.glb",+    "glb_sha256": "e0d647b0cdd818af0bcfb0a20a142ae2b5e310b16bec8758850eaacf6f2e0888",+    "footprint": "pca9555pwr.kicad_mod",+    "footprint_sha256": "951159bb3a87997ba4a4f14affd963324813db13d9426715b2a29388369d74ed",+    "pins": "page.json component.pins",+    "pins_sha256": "957b19b548c4bb76d815c2ef4ec1478ac3b34422f86f558e3b0bd6b880eb37d8"+  },+  "generator": "adom-wiki 1.8.31 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "INT",+      "x": -4.29,+      "y": -3.575,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "2",+      "text": "A1",+      "x": -3.7,+      "y": -2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "3",+      "text": "A2",+      "x": -3.7,+      "y": -2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "4",+      "text": "P00",+      "x": -3.7,+      "y": -1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "5",+      "text": "P01",+      "x": -3.7,+      "y": -0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "6",+      "text": "P02",+      "x": -3.7,+      "y": -0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "7",+      "text": "P03",+      "x": -3.7,+      "y": 0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "8",+      "text": "P04",+      "x": -3.7,+      "y": 0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "9",+      "text": "P05",+      "x": -3.7,+      "y": 1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "10",+      "text": "P06",+      "x": -3.7,+      "y": 2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "11",+      "text": "P07",+      "x": -3.7,+      "y": 2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "12",+      "text": "GND",+      "x": -3.7,+      "y": 3.575,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "13",+      "text": "P10",+      "x": 3.7,+      "y": 3.575,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "14",+      "text": "P11",+      "x": 3.7,+      "y": 2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "15",+      "text": "P12",+      "x": 3.7,+      "y": 2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "16",+      "text": "P13",+      "x": 3.7,+      "y": 1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "17",+      "text": "P14",+      "x": 3.7,+      "y": 0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "18",+      "text": "P15",+      "x": 3.7,+      "y": 0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "19",+      "text": "P16",+      "x": 3.7,+      "y": -0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "20",+      "text": "P17",+      "x": 3.7,+      "y": -0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "21",+      "text": "A0",+      "x": 3.7,+      "y": -1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "22",+      "text": "SCL",+      "x": 3.7,+      "y": -2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "23",+      "text": "SDA",+      "x": 3.7,+      "y": -2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "24",+      "text": "VCC",+      "x": 3.7,+      "y": -3.575,+      "align": "left",+      "vertical": false,+      "h": 0.325+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -3.575+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        3.575+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        3.575+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -3.575+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    }+  ]+}