← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "SD", "type": "input",- "description": "Active-low shutdown. Drive low (VSL \u2264 0.4V) to place the amplifier in low-power shutdown (ISHDN \u2264 1\u00b5A); drive high (VSH \u2265 1.2V) for normal operation. Recommended to be delayed 1-100ms (typ 10ms) after VDD rises for pop-free start-up."+ "description": "Active-low shutdown. Drive low (VSL ≤ 0.4V) to place the amplifier in low-power shutdown (ISHDN ≤ 1µA); drive high (VSH ≥ 1.2V) for normal operation. Recommended to be delayed 1-100ms (typ 10ms) after VDD rises for pop-free start-up." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "IN+", "type": "input",- "description": "Non-inverting analog audio input. AC-couple through a 0.1-0.22\u00b5F capacitor (typ 0.1\u00b5F) that forms a high-pass filter with the 10k\u03a9 internal input impedance. Internally biased to VDD/2."+ "description": "Non-inverting analog audio input. AC-couple through a 0.1-0.22µF capacitor (typ 0.1µF) that forms a high-pass filter with the 10kΩ internal input impedance. Internally biased to VDD/2." }, { "number": "4", "name": "IN-", "type": "input",- "description": "Inverting analog audio input. AC-couple through a 0.1-0.22\u00b5F capacitor (typ 0.1\u00b5F); for single-ended sources this pin is capacitor-coupled to signal ground. Internal 10k\u03a9 input resistor sets the gain with the 150k\u03a9 feedback resistor (fixed 23.5dB max)."+ "description": "Inverting analog audio input. AC-couple through a 0.1-0.22µF capacitor (typ 0.1µF); for single-ended sources this pin is capacitor-coupled to signal ground. Internal 10kΩ input resistor sets the gain with the 150kΩ feedback resistor (fixed 23.5dB max)." }, { "number": "5", "name": "VO+", "type": "output",- "description": "Positive Class-D BTL PWM speaker output. Connects directly to one speaker terminal (filterless); optional ferrite bead + 220pF to GND for EMI reduction. Delivers up to 2.5W into 4\u03a9 at VDD=5V."+ "description": "Positive Class-D BTL PWM speaker output. Connects directly to one speaker terminal (filterless); optional ferrite bead + 220pF to GND for EMI reduction. Delivers up to 2.5W into 4Ω at VDD=5V." }, { "number": "6", "name": "VDD", "type": "power_in",- "description": "Positive supply, 2.0V to 5.5V (absolute max 6.0V). Decouple with a 1\u00b5F ceramic close to the pin plus 10\u00b5F bulk. Quiescent current typ 4mA, max 8mA at no-load."+ "description": "Positive supply, 2.0V to 5.5V (absolute max 6.0V). Decouple with a 1µF ceramic close to the pin plus 10µF bulk. Quiescent current typ 4mA, max 8mA at no-load." }, { "number": "7",@@ -138,5 +138,8 @@ "docs/pam8302aadcr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }