← Commit history
README.mdadded+57@@ -0,0 +1,57 @@+# P25Q16SH-SSH-IR++**PUYA** · NOR FLASH · SOP-8++P25Q16SH-SSH-IR from PUYA, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS# | input | Chip select input, active low. Enables the device when driven low and puts the outputs in high-impedance when driven high. Must be toggled between each command. |+| 2 | SO/SIO1 | bidirectional | Serial data output (SO) in Standard SPI mode (1x I/O). Acts as bidirectional I/O line SIO1 in Dual/Quad SPI and QPI modes. |+| 3 | WP#/SIO2 | bidirectional | Write protect input (active low) in Standard/Dual SPI modes; asserts hardware protection of the status register per SRP bits. Acts as bidirectional I/O line SIO2 in Quad SPI and QPI modes. |+| 4 | GND | power_in | Ground reference for the device. All signal voltages are referenced to this pin. |+| 5 | SI/SIO0 | bidirectional | Serial data input (SI) in Standard SPI mode (1x I/O). Acts as bidirectional I/O line SIO0 in Dual/Quad SPI and QPI modes. |+| 6 | SCLK | input | Serial interface clock input. Data on SI/SIOx is latched on the rising edge and data on SO/SIOx is shifted out on the falling edge. Supports SPI Mode 0 and Mode 3, up to 133 MHz. |+| 7 | HOLD#/RESET#/SIO3 | bidirectional | Hardware Reset (active low) or Hold input to pause the device without deselecting it, in Standard/Dual SPI modes. Acts as bidirectional I/O line SIO3 in Quad SPI and QPI modes. |+| 8 | VCC | power_in | Power supply input, 2.3V to 3.6V. Should be decoupled with a 100nF ceramic capacitor placed close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | PUYA |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++Same part, different packaging or reel option.++- `P25Q16SH-SSH-IT`+- `P25Q16SH-SSH-IR`+- `P25Q16SH-SSH-IRSUH-IT`+- `P25Q16SH-SSH-IRSUH-IR`+- `P25Q16SH-SSH-IRTSH-IT`+- `P25Q16SH-SSH-IRTSH-IR`+- `P25Q16SH-SSH-IRUXH-IR`+- `P25Q16SH-SSH-IRNXH-IR`+- `P25Q16SH-SSH-IRWXH-IR`++## CAD (KiCad official)++- Symbol: `P25Q16SH-SSH-IR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [PUYA datasheet](docs/p25q16sh-ssh-ir-datasheet.pdf) (109 pp, sha256 `d5af0ef8b9726b7e`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/p25q16sh-ssh-ir-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "p25q16sh-ssh-ir",+ "version": "0.1.0",+ "type": "component",+ "description": "PUYA NOR FLASH, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "p25q16sh-ssh-ir"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "p25q16sh-ssh-ir.kicad_sym",+ "p25q16sh-ssh-ir.kicad_mod",+ "p25q16sh-ssh-ir.glb",+ "p25q16sh-ssh-ir.step",+ "p25q16sh-ssh-ir.lbr",+ "docs/hero.png",+ "docs/p25q16sh-ssh-ir-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}