← Commit history

Initial commit: component/opt3101rhfr

Ray ·1fc6bd575b ·
2 files changed +104
README.mdadded+70
@@ -0,0 +1,70 @@+# OPT3101RHFR++**Texas Instruments** · Position Sensor · QFN-28-EP(4x5)++OPT3101RHFR from Texas Instruments, in a QFN-28-EP(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A1 | input | I2C slave address bit LSB1. Selects the lower address bits of the device. Referenced to AVDD I/O domain. |+| 2 | A2 | input | I2C slave address bit LSB2. Selects the lower address bits of the device. Referenced to AVDD I/O domain. |+| 3 | IOVSS | power_in | Ground return for the digital and I/O supply (IOVDD). |+| 4 | TX2 | output | Illumination driver output (channel 2). Connects to the cathode of the emitter LED/laser diode; the anode connects to the supply. Programmable current up to 173.6 mA; VDRV range 0.7 V to 3.6 V. |+| 5 | TX1 | output | Illumination driver output (channel 1). Connects to the cathode of the emitter LED/laser diode; anode to supply. Programmable current up to 173.6 mA. |+| 6 | VSSL | power_in | Illumination driver ground. Dedicated low-inductance return for the TX0/TX1/TX2 emitter current. |+| 7 | TX0 | output | Illumination driver output (channel 0). Connects to the cathode of the emitter LED/laser diode; anode to supply. Programmable current up to 173.6 mA. |+| 8 | IOVSS | power_in | Ground return for the digital and I/O supply (IOVDD). |+| 9 | IOVDD | power_in | 1.7 V to 3.6 V supply for the digital I/O and internal illumination driver logic. Bypass to IOVSS. |+| 10 | IOVDD | power_in | 1.7 V to 3.6 V supply for the digital I/O and internal illumination driver logic. Bypass to IOVSS. |+| 11 | GP1 | output | General-purpose output. IOVDD I/O domain. |+| 12 | GP2 | bidirectional | General-purpose I/O; can also be configured as CLKREF input for the modulation clock. IOVDD I/O domain. |+| 13 | SCL_S | input | I2C slave clock. Requires a 10 kΩ pull-up to 3.3 V. IOVDD I/O domain. |+| 14 | SDA_S | bidirectional | I2C slave data (open-drain). Requires a 10 kΩ pull-up to 3.3 V. IOVDD I/O domain. |+| 15 | SCL_M | output | I2C master clock (for optional external temperature sensor / peripheral). Requires a 10 kΩ pull-up to 3.3 V. |+| 16 | SDA_M | bidirectional | I2C master data (open-drain). Requires a 10 kΩ pull-up to 3.3 V. |+| 17 | RST_MS | input | Active-low, monostable-triggered global reset. No internal pull-up; must be driven by host or externally pulled up. IOVDD I/O domain. |+| 18 | REG_MODE | input | Selects the mode of the internal 1.8 V LDO regulator that produces AVDD and DVDD from AVDD3. IOVDD I/O domain. |+| 19 | DVDD | power_in | 1.8 V digital core supply (nominal 1.8 V, range 1.7-1.9 V). Can be supplied externally or by the internal LDO from AVDD3. |+| 20 | AVDD3 | power_in | 3.3 V analog supply (range 3.0-3.6 V). Also feeds the internal LDO when the on-chip 1.8 V regulator is enabled. |+| 21 | AVDD | power_in | 1.8 V analog supply (range 1.7-1.9 V). Can be supplied externally or by the internal LDO from AVDD3. |+| 22 | NC | unconnected | No internal connection. May be left floating or tied to ground. |+| 23 | AVSS | power_in | Analog ground return. |+| 24 | INM | input | AFE negative input. Connect the photodiode-equivalent bypass capacitor here; the other end of the capacitor returns to AVSS. Bias voltage VR ≈ 1 V. |+| 25 | INP | input | AFE positive input. Connect the anode of the photodiode here (cathode to AVSS). Bias voltage VR ≈ 1 V; max input photodiode capacitance 6 pF. |+| 26 | AVSS | power_in | Analog ground return. |+| 27 | AVSS | power_in | Analog ground return. |+| 28 | A0 | input | I2C slave address bit LSB0. Selects the lower address bits of the device. Referenced to AVDD I/O domain. |+| PAD | Thermal Pad | power_in | Exposed thermal pad on the package bottom. Connect through multiple vias to the AVSS PCB ground plane for proper thermal performance and electrical grounding. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | QFN-28-EP(4x5) |+| Category | Sensor |+| Pins | 29 |++## Ordering variants++- `OPT3101RHFR`+- `OPT3101RHFRRHFT`++## CAD (KiCad official)++- Symbol: `OPT3101RHFR`+- Footprint: `Package_DFN_QFN:QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm`+- 3D model: QFN-28-EP(4x5) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](docs/opt3101rhfr-datasheet.pdf) (116 pp, sha256 `d2e248f208968588`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/opt3101rhfr-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "opt3101rhfr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Position Sensor, QFN-28-EP(4x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensor",+    "opt3101rhfr"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "opt3101rhfr.kicad_sym",+    "opt3101rhfr.kicad_mod",+    "opt3101rhfr.glb",+    "opt3101rhfr.step",+    "opt3101rhfr.lbr",+    "docs/hero.png",+    "docs/opt3101rhfr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file