← Commit history
opt3001idnprq1: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+68−1
page.json+68−1@@ -33,5 +33,72 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "OPT3001IDNPRQ1",+ "manufacturer": "Texas Instruments",+ "package": "WSON-6-EP(2x2)",+ "pin_count": 7,+ "category": "Ambient Light Sensors",+ "parts": {+ "symbol": "opt3001idnprq1.kicad_sym",+ "footprint": "opt3001idnprq1.kicad_mod",+ "model_3d": "opt3001idnprq1-etched.glb",+ "model_3d_plain": "opt3001idnprq1.glb",+ "model_3d_step": "opt3001idnprq1-etched.step",+ "model_3d_step_plain": "opt3001idnprq1.step",+ "lbr": "opt3001idnprq1.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD",+ "type": "power_in",+ "description": "Device power supply. Connect to a 1.6 V to 3.6 V rail. Bypass locally with a decoupling capacitor."+ },+ {+ "number": "2",+ "name": "ADDR",+ "type": "input",+ "description": "I2C address select. Tie to GND, VDD, SDA, or SCL to program the two LSBs of the 7-bit I2C slave address (allowing up to four devices on one bus)."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device. Also serves as the electrical connection point for the exposed thermal/mechanical pad on the package underside."+ },+ {+ "number": "4",+ "name": "SCL",+ "type": "input",+ "description": "I2C/SMBus serial clock input. Open-drain bus line; pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant."+ },+ {+ "number": "5",+ "name": "INT",+ "type": "output",+ "description": "Interrupt/alert output, open-drain, active-low. Asserts on programmable high/low light thresholds or on end-of-conversion. Pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant."+ },+ {+ "number": "6",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C/SMBus serial data line, open-drain. Pull up with a ~10 kΩ resistor to a 1.6 V to 5.5 V supply. 5.5 V tolerant."+ },+ {+ "number": "7",+ "name": "PAD",+ "type": "passive",+ "description": "Exposed thermal/mechanical pad on the package underside. TI recommends electrically connecting the pad to ground (via a PCB trace or vias directly on the pad)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}