← Commit history
opa691idbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+91−11
package.json+49−9@@ -68,37 +68,37 @@ "number": "1", "name": "Output", "type": "output",- "description": "Output terminal providing voltage swing of \u00b14.0V into no load and \u00b13.9V into 100\u03a9 load with sourcing/sinking current of 190mA and short-circuit current of 250mA."+ "description": "Output terminal providing voltage swing of ±4.0V into no load and ±3.9V into 100Ω load with sourcing/sinking current of 190mA and short-circuit current of 250mA." }, { "number": "2",- "name": "\u2013VS",+ "name": "–VS", "type": "power_in",- "description": "Negative supply voltage connection supporting \u00b12V to \u00b16V dual-supply or ground reference for +5V to +12V single-supply operation with junction temperature rating of +175\u00b0C maximum."+ "description": "Negative supply voltage connection supporting ±2V to ±6V dual-supply or ground reference for +5V to +12V single-supply operation with junction temperature rating of +175°C maximum." }, { "number": "3", "name": "Noninverting Input", "type": "input",- "description": "Non-inverting input with common-mode input range of \u00b13.2V to \u00b13.5V over -40\u00b0C to +85\u00b0C, input impedance of 100||2k\u03a9||pF, and bias current of +15\u00b5A to +45\u00b5A."+ "description": "Non-inverting input with common-mode input range of ±3.2V to ±3.5V over -40°C to +85°C, input impedance of 100||2kΩ||pF, and bias current of +15µA to +45µA." }, { "number": "4", "name": "Inverting Input", "type": "input",- "description": "Inverting input with 35\u03a9 open-loop input resistance, bias current of \u00b15\u00b5A to \u00b140\u00b5A, and maximum differential input voltage of \u00b11.2V."+ "description": "Inverting input with 35Ω open-loop input resistance, bias current of ±5µA to ±40µA, and maximum differential input voltage of ±1.2V." }, { "number": "5", "name": "DIS", "type": "input",- "description": "Disable control input that reduces supply current to \u2264150\u00b5A and places output in high impedance (70dB isolation at 5MHz) when pulled below 1.8V with 400ns disable time, or enables normal operation when held above 3.3V with 25ns enable time."+ "description": "Disable control input that reduces supply current to ≤150µA and places output in high impedance (70dB isolation at 5MHz) when pulled below 1.8V with 400ns disable time, or enables normal operation when held above 3.3V with 25ns enable time." }, { "number": "6", "name": "+VS", "type": "power_in",- "description": "Positive supply connection for \u00b12V to \u00b16V dual-supply or +5V to +12V single-supply operation with quiescent current of 5.1mA typical at \u00b15V and power-supply rejection ratio of 49dB to 58dB over temperature."+ "description": "Positive supply connection for ±2V to ±6V dual-supply or +5V to +12V single-supply operation with quiescent current of 5.1mA typical at ±5V and power-supply rejection ratio of 49dB to 58dB over temperature." } ], "provenance": {@@ -133,6 +133,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "opa691idbvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "opa691idbvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3f30f36f1ac165b9ac76b91e3ad09c995fa1ec382b587855774aa85fba7dd875",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -118,7 +118,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "opa691idbvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "opa691idbvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3f30f36f1ac165b9ac76b91e3ad09c995fa1ec382b587855774aa85fba7dd875",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -165,4 +205,4 @@ "visibility": { "public": true }-}+}