← Commit history

opa548f: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·e58eb62c60 · ·parent 16ae423
2 files changed +91−11
package.json+49−9
@@ -69,7 +69,7 @@       },       {         "number": "2",-        "name": "VIN\u2013",+        "name": "VIN–",         "type": "power_in",         "description": "Inverting input with common-mode voltage range from (V-) - 0.1 V to (V+) - 2.3 V"       },@@ -77,31 +77,31 @@         "number": "3",         "name": "ILIM",         "type": "input",-        "description": "Current limit control input; connect resistor RCL between ILIM and V- to set output current limit from 0 A to 5 A per ILIM = (15000)(4.75) / (13750 \u03a9 + RCL)"+        "description": "Current limit control input; connect resistor RCL between ILIM and V- to set output current limit from 0 A to 5 A per ILIM = (15000)(4.75) / (13750 Ω + RCL)"       },       {         "number": "4",-        "name": "V\u2013",+        "name": "V–",         "type": "power_in",-        "description": "Negative power supply; supports supply voltage of 8 V to 60 V (single supply) or \u00b14 V to \u00b130 V (dual supply)"+        "description": "Negative power supply; supports supply voltage of 8 V to 60 V (single supply) or ±4 V to ±30 V (dual supply)"       },       {         "number": "5",         "name": "V+",         "type": "power_in",-        "description": "Positive power supply; supports supply voltage of 8 V to 60 V (single supply) or \u00b14 V to \u00b130 V (dual supply)"+        "description": "Positive power supply; supports supply voltage of 8 V to 60 V (single supply) or ±4 V to ±30 V (dual supply)"       },       {         "number": "6",         "name": "VO",         "type": "output",-        "description": "Amplifier output with maximum continuous current of \u00b13 A DC and 3 Arms AC; output voltage swing limited by supply voltage and load impedance"+        "description": "Amplifier output with maximum continuous current of ±3 A DC and 3 Arms AC; output voltage swing limited by supply voltage and load impedance"       },       {         "number": "7",         "name": "E/S",         "type": "bidirectional",-        "description": "Enable/disable control and thermal shutdown status output; pull to \u2264 (V-) + 0.8 V to disable output (1 \u00b5s disable time) or \u2265 (V-) + 2.4 V to enable output (3 \u00b5s enable time); thermal shutdown engages at 160\u00b0C and resets at 140\u00b0C"+        "description": "Enable/disable control and thermal shutdown status output; pull to ≤ (V-) + 0.8 V to disable output (1 µs disable time) or ≥ (V-) + 2.4 V to enable output (3 µs enable time); thermal shutdown engages at 160°C and resets at 140°C"       },       {         "number": "8",@@ -144,6 +144,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "opa548f.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "34b8121b216e7b6490402befe573a69b06919acafd33d6e8da88bd238574da52",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "opa548f-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f87358ed5e60c958191719ea431a8055ce6be41bd93c2ca50025f2ad859a5f0e",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -129,7 +129,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "opa548f.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "34b8121b216e7b6490402befe573a69b06919acafd33d6e8da88bd238574da52",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "opa548f-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f87358ed5e60c958191719ea431a8055ce6be41bd93c2ca50025f2ad859a5f0e",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -176,4 +216,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}