← Commit history
page.json+8−5@@ -38,13 +38,13 @@ "number": "1", "name": "V+", "type": "power_in",- "description": "Positive supply pin; specified operating supply range is 1.8 V to 5.5 V (or \u00b10.9 V to \u00b12.75 V split supply), absolute maximum (V+)-(V-) supply voltage is 6 V; a local 0.001 \u00b5F to 0.1 \u00b5F ceramic bypass capacitor is recommended."+ "description": "Positive supply pin; specified operating supply range is 1.8 V to 5.5 V (or ±0.9 V to ±2.75 V split supply), absolute maximum (V+)-(V-) supply voltage is 6 V; a local 0.001 µF to 0.1 µF ceramic bypass capacitor is recommended." }, { "number": "2", "name": "SHDN", "type": "input",- "description": "Active-high shutdown/enable input referenced to V-; a logic high of (V+)-0.1 V up to V+ enables the amplifier while a logic low of (V-)+0.1 V down to V- disables it, with 5.5 V max allowed relative to V-; the pin must be driven to a valid level and not left floating, and disabled channels draw a typical 0.1 \u00b5A (max 0.5 \u00b5A) quiescent current."+ "description": "Active-high shutdown/enable input referenced to V-; a logic high of (V+)-0.1 V up to V+ enables the amplifier while a logic low of (V-)+0.1 V down to V- disables it, with 5.5 V max allowed relative to V-; the pin must be driven to a valid level and not left floating, and disabled channels draw a typical 0.1 µA (max 0.5 µA) quiescent current." }, { "number": "3",@@ -62,13 +62,13 @@ "number": "5", "name": "V-", "type": "power_in",- "description": "Negative supply pin (ground reference in single-supply operation); together with V+ establishes the 1.8 V to 5.5 V (or \u00b10.9 V to \u00b12.75 V) supply range and should have a local ceramic bypass capacitor."+ "description": "Negative supply pin (ground reference in single-supply operation); together with V+ establishes the 1.8 V to 5.5 V (or ±0.9 V to ±2.75 V) supply range and should have a local ceramic bypass capacitor." }, { "number": "6", "name": "OUT", "type": "output",- "description": "Amplifier output; rail-to-rail output typically swings within 10 mV (20 mV max) of either supply rail into a 10-k\u03a9 load, delivers up to \u00b165 mA short-circuit current at VS=5.5 V, and enters a high-impedance state when the device is disabled via SHDN."+ "description": "Amplifier output; rail-to-rail output typically swings within 10 mV (20 mV max) of either supply rail into a 10-kΩ load, delivers up to ±65 mA short-circuit current at VS=5.5 V, and enters a high-impedance state when the device is disabled via SHDN." } ], "provenance": {@@ -146,5 +146,8 @@ "docs/opa322saidbvr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }