← Commit history
README.mdadded+43@@ -0,0 +1,43 @@+# OPA322SAIDBVR++**Texas Instruments** · Operational Amplifier · SOT-23-6++OPA322SAIDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | V+ | power_in | Positive supply pin; specified operating supply range is 1.8 V to 5.5 V (or ±0.9 V to ±2.75 V split supply), absolute maximum (V+)-(V-) supply voltage is 6 V; a local 0.001 µF to 0.1 µF ceramic bypass capacitor is recommended. |+| 2 | SHDN | input | Active-high shutdown/enable input referenced to V-; a logic high of (V+)-0.1 V up to V+ enables the amplifier while a logic low of (V-)+0.1 V down to V- disables it, with 5.5 V max allowed relative to V-; the pin must be driven to a valid level and not left floating, and disabled channels draw a typical 0.1 µA (max 0.5 µA) quiescent current. |+| 3 | -IN | input | Inverting input of the operational amplifier; common-mode input voltage range is (V-)-0.1 V to (V+)+0.1 V, and input current should be limited to 10 mA or less (via series resistor) for signals overdriving the supply rails by more than 0.5 V. |+| 4 | +IN | input | Non-inverting input of the operational amplifier; common-mode input voltage range is (V-)-0.1 V to (V+)+0.1 V, and input current should be limited to 10 mA or less for overdrive protection. |+| 5 | V- | power_in | Negative supply pin (ground reference in single-supply operation); together with V+ establishes the 1.8 V to 5.5 V (or ±0.9 V to ±2.75 V) supply range and should have a local ceramic bypass capacitor. |+| 6 | OUT | output | Amplifier output; rail-to-rail output typically swings within 10 mV (20 mV max) of either supply rail into a 10-kΩ load, delivers up to ±65 mA short-circuit current at VS=5.5 V, and enters a high-impedance state when the device is disabled via SHDN. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOT-23-6 |+| Category | Amplifiers/Comparators |+| Pins | 6 |++## CAD (KiCad official)++- Symbol: `OPA322SAIDBVR`+- Footprint: `Package_TO_SOT_SMD:SOT-23-6`+- 3D model: SOT-23-6 (KiCad packages3D, STEP)+- 3D model files: `opa322saidbvr-etched.step` / `opa322saidbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `opa322saidbvr.step` / `opa322saidbvr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/opa2322) (51 pp, sha256 `b4b7c5ce416fcd4d`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/opa322saidbvr-datasheet.pdf)
page.jsonadded+129@@ -0,0 +1,129 @@+{+ "slug": "opa322saidbvr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Operational Amplifier, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "opa322saidbvr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "opa322saidbvr.kicad_sym",+ "opa322saidbvr.kicad_mod",+ "opa322saidbvr.glb",+ "opa322saidbvr.step",+ "opa322saidbvr.lbr",+ "docs/hero.png",+ "docs/opa322saidbvr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "OPA322SAIDBVR",+ "manufacturer": "Texas Instruments",+ "package": "SOT-23-6",+ "pin_count": 6,+ "category": "Amplifiers/Comparators",+ "subcategory": "Operational Amplifier",+ "datasheet": "https://www.ti.com/cn/lit/gpn/opa2322",+ "parts": {+ "symbol": "opa322saidbvr.kicad_sym",+ "footprint": "opa322saidbvr.kicad_mod",+ "model_3d": "opa322saidbvr-etched.glb",+ "model_3d_plain": "opa322saidbvr.glb",+ "model_3d_step": "opa322saidbvr-etched.step",+ "model_3d_step_plain": "opa322saidbvr.step",+ "lbr": "opa322saidbvr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2869000"+ },+ "pins": [+ {+ "number": "1",+ "name": "V+",+ "type": "power_in",+ "description": "Positive supply pin; specified operating supply range is 1.8 V to 5.5 V (or ±0.9 V to ±2.75 V split supply), absolute maximum (V+)-(V-) supply voltage is 6 V; a local 0.001 µF to 0.1 µF ceramic bypass capacitor is recommended."+ },+ {+ "number": "2",+ "name": "SHDN",+ "type": "input",+ "description": "Active-high shutdown/enable input referenced to V-; a logic high of (V+)-0.1 V up to V+ enables the amplifier while a logic low of (V-)+0.1 V down to V- disables it, with 5.5 V max allowed relative to V-; the pin must be driven to a valid level and not left floating, and disabled channels draw a typical 0.1 µA (max 0.5 µA) quiescent current."+ },+ {+ "number": "3",+ "name": "-IN",+ "type": "input",+ "description": "Inverting input of the operational amplifier; common-mode input voltage range is (V-)-0.1 V to (V+)+0.1 V, and input current should be limited to 10 mA or less (via series resistor) for signals overdriving the supply rails by more than 0.5 V."+ },+ {+ "number": "4",+ "name": "+IN",+ "type": "input",+ "description": "Non-inverting input of the operational amplifier; common-mode input voltage range is (V-)-0.1 V to (V+)+0.1 V, and input current should be limited to 10 mA or less for overdrive protection."+ },+ {+ "number": "5",+ "name": "V-",+ "type": "power_in",+ "description": "Negative supply pin (ground reference in single-supply operation); together with V+ establishes the 1.8 V to 5.5 V (or ±0.9 V to ±2.75 V) supply range and should have a local ceramic bypass capacitor."+ },+ {+ "number": "6",+ "name": "OUT",+ "type": "output",+ "description": "Amplifier output; rail-to-rail output typically swings within 10 mV (20 mV max) of either supply rail into a 10-kΩ load, delivers up to ±65 mA short-circuit current at VS=5.5 V, and enters a high-impedance state when the device is disabled via SHDN."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 51,+ "cost_usd": 0.2958,+ "at": "2026-09-23T14:07:51"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/opa2322",+ "pages": 51,+ "sha256": "b4b7c5ce416fcd4d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 6,+ "described": 6,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}