← Commit history
opa322aidbvr: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+56−1
page.json+56−1@@ -33,5 +33,60 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "OPA322AIDBVR",+ "manufacturer": "Texas Instruments",+ "package": "SOT-23-5",+ "pin_count": 5,+ "category": "Operational Amplifier",+ "parts": {+ "symbol": "opa322aidbvr.kicad_sym",+ "footprint": "opa322aidbvr.kicad_mod",+ "model_3d": "opa322aidbvr-etched.glb",+ "model_3d_plain": "opa322aidbvr.glb",+ "model_3d_step": "opa322aidbvr-etched.step",+ "model_3d_step_plain": "opa322aidbvr.step",+ "lbr": "opa322aidbvr.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "output",+ "description": "Amplifier output. Rail-to-rail output swing to within ~10 mV of either supply rail with RL = 10 kΩ. Short-circuit current is typically ±65 mA at VS = 5.5 V; open-loop output resistance ~90 Ω at 1 MHz."+ },+ {+ "number": "2",+ "name": "V-",+ "type": "power_in",+ "description": "Negative supply rail. Tie to GND for single-supply operation (1.8 V to 5.5 V total supply), or to a negative rail for split-supply operation (±0.9 V to ±2.75 V). Bypass with a 0.1-µF ceramic capacitor to V+ as close to the device as possible."+ },+ {+ "number": "3",+ "name": "+IN",+ "type": "input",+ "description": "Non-inverting input. Rail-to-rail common-mode range from (V-) - 0.1 V to (V+) + 0.1 V. Input bias current typically ±0.2 pA at 25°C; inputs are ESD-diode-clamped to the supplies (limit external overdrive current to ≤10 mA)."+ },+ {+ "number": "4",+ "name": "-IN",+ "type": "input",+ "description": "Inverting input. Same rail-to-rail common-mode range and ±0.2 pA typical bias current as the +IN pin. Used with the OUT pin to set closed-loop gain via an external feedback network."+ },+ {+ "number": "5",+ "name": "V+",+ "type": "power_in",+ "description": "Positive supply rail. Operating range 1.8 V to 5.5 V single-supply (or ±0.9 V to ±2.75 V split-supply); absolute maximum (V+) - (V-) = 6 V. Bypass with a 0.1-µF ceramic capacitor to V- close to the pin."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}