The 3D model is generated, not the manufacturer's: a checked drawn model is attached
This page's STEP is a model generated with Open CASCADE from the datasheet, not the manufacturer's model, and it shows. The leads are not gull wings: they are flat strips or square posts, and the body has no draft or pin-1 dimple. Placed on a board, the part looks fake.
The manufacturer's model
- Vendor: Texas Instruments
- Where: https://www.ti.com/product/OPA2365 (CAD symbols, footprints & 3D models: SOIC (D), 8 pins -> 'Ultra Librarian'); also checked https://www.ti.com/product/OPA2365/part-details/OPA2365AIDR
- Route: TI hosts no STEP for this part. The only CAD link is the Ultra Librarian embed https://vendor.ultralibrarian.com/TI/embedded/?gpn=OPA2365&package=D&pin=8. Its terms say EMA owns the content, so it is not clearly TI's own model.
- Download: none available
Licences:
- Ultra Librarian (EMA Design Automation): not allowed. https://vendor.ultralibrarian.com/TI/embedded/?gpn=OPA2365&package=D&pin=8 (Terms And Conditions modal, #modal-container-license); identical text on the /adi/ and /stmicro/ embeds
Usage. ... You may incorporate the CONTENT that you are authorized to access into your products or designs which may be distributed without restriction, including for commercial, educational, and open-source purposes. You may not use CONTENT for publishing or creating a library or libraries for sale or distribution for commercial purposes or enabling third parties to do the same. | Copyright. The CONTENT is owned by EMA ... You agree to take all reasonable steps and to exercise due diligence to protect the CONTENT and the accompanying materials from unauthorized reproduction, publication, or d
So the manufacturer's model can't replace the page's STEP: it is not published, or only through a third party whose terms forbid redistribution.
Offered: a drawn model, checked against the datasheet
Attached is a drawn model with the part number laser-etched as a flat, toggleable Adom.LaserEtch layer: along the pin rows, upright, pin 1 lower left (adom-aiflow-etch check PASS).
- Base: KiCad's official 3D library model
Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.step, made by KiCad's package generator. Real gull-wing leads, drafted body, pin-1 dimple. - Licence: CC BY-SA 4.0 with the KiCad libraries' design exception (https://www.kicad.org/libraries/license/). It can be redistributed with attribution to the KiCad library team.
- Why not drawn on the service: the shared step2glb service has no permitted body-building verb (
/create-chipand/bakeare chipsmith; adom/adom-step2glb#27). - Checked against: OPAx365 50-MHz, Zero-Crossover, Low-Distortion, High-CMRR, RRI/O, Single-Supply Operational Amplifiers (Rev. G (May 2023), p.33 PACKAGE OUTLINE D0008A (SOIC-8, 4214825/C 02/2019)). Every face was measured with the service's
/step-meta. - The proof:
dims-drawn.md(datasheet min/max against the model) andoverlay.png(every face of the model at true scale, top and side, inside the datasheet's limits). The vendor drawings are not to scale, so the limits are drawn instead. - Every measured dimension is inside the datasheet's limits.
Suggested: replace the page's STEP with the attached etched model, keep its provenance (attached as provenance.json), and credit KiCad's library.


0 Replies
Log in to reply.