OPA2188AIDR

@@ -8,14 +8,14 @@ OPA2188AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions ext  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OUT A | output | Amplifier A output. Rail-to-rail CMOS output stage; short-circuit current +/-18 mA typical; open-loop output resistance 120 ohm at 1 MHz; drives up to 1 nF capacitive load. |-| 2 | -IN A | input | Amplifier A inverting input. High-impedance CMOS input (100 MOhm || 6 pF differential); input bias current typ +/-160 pA; diode-clamped to supply rails, limit external current to 10 mA if exceeding rails by >0.5 V. |-| 3 | +IN A | input | Amplifier A non-inverting input. Input common-mode range extends from V- to (V+)-1.5 V; input bias current typ +/-160 pA; diode-clamped to supply rails. |-| 4 | V- | power_in | Negative supply rail. Single-supply operation: connect to GND (0 V) with V+ from +4 V to +36 V. Dual-supply operation: -2 V to -18 V. Bypass locally with 0.1 uF close to the pin. Shared between both amplifiers A and B. |-| 5 | +IN B | input | Amplifier B non-inverting input. Input common-mode range extends from V- to (V+)-1.5 V; input bias current typ +/-160 pA; diode-clamped to supply rails. |-| 6 | -IN B | input | Amplifier B inverting input. High-impedance CMOS input (100 MOhm || 6 pF differential); input bias current typ +/-160 pA; diode-clamped to supply rails, limit external current to 10 mA if exceeding rails by >0.5 V. |-| 7 | OUT B | output | Amplifier B output. Rail-to-rail CMOS output stage; short-circuit current +/-18 mA typical; open-loop output resistance 120 ohm at 1 MHz; drives up to 1 nF capacitive load. |-| 8 | V+ | power_in | Positive supply rail. Operating range +4 V to +36 V single-supply (or +2 V to +18 V dual). Quiescent current 415 uA per amplifier typ (475 uA max) at Vs = +/-18 V. Bypass locally with 0.1 uF close to the pin. Shared between both amplifiers A and B. |+| 1 | OUT A | output | Channel A op-amp output. Rail-to-rail output stage; drives up to ±18 mA short-circuit current with output swing to within ~250 mV of the rails at 10 kΩ load. |+| 2 | -IN A | input | Channel A inverting input. High-impedance CMOS input (100 MΩ || 6 pF differential); diode-clamped to supply rails, limit external current to ≤10 mA if signal exceeds V- to V+ by more than 0.5 V. |+| 3 | +IN A | input | Channel A non-inverting input. Common-mode range extends from V- to (V+)-1.5 V; input bias current ±160 pA typical. |+| 4 | V- | power_in | Negative supply rail. Connect to ground for single-supply operation or to the negative rail for split supply. Total supply range 4 V to 36 V (±2 V to ±18 V). |+| 5 | +IN B | input | Channel B non-inverting input. Common-mode range extends from V- to (V+)-1.5 V; input bias current ±160 pA typical. |+| 6 | -IN B | input | Channel B inverting input. High-impedance CMOS input (100 MΩ || 6 pF differential); diode-clamped to supply rails, limit external current to ≤10 mA if signal exceeds V- to V+ by more than 0.5 V. |+| 7 | OUT B | output | Channel B op-amp output. Rail-to-rail output stage; drives up to ±18 mA short-circuit current with output swing to within ~250 mV of the rails at 10 kΩ load. |+| 8 | V+ | power_in | Positive supply rail. Bypass with 100 nF close to the pin. Total supply range 4 V to 36 V (±2 V to ±18 V); quiescent current 475 µA maximum per amplifier. |  ## Key specifications 

@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Texas Instruments Precision OpAmps, SOIC-8</description> <packages> <package name="SOIC-8_3.9x4.9mm_P1.27mm">   <description>SOIC-8, 3.9 x 4.9 mm, 1.27 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="OPA2188AIDR">+  <description>Texas Instruments Precision OpAmps, SOIC-8</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -104,7 +105,7 @@ </symbols> <devicesets> <deviceset name="OPA2188AIDR" prefix="U">-  <description></description>+  <description>Texas Instruments Precision OpAmps, SOIC-8</description>   <gates>     <gate name="G$1" symbol="OPA2188AIDR" x="0" y="0"/>   </gates>@@ -120,7 +121,12 @@         <connect gate="G$1" pin="-IN_B" pad="6"/>         <connect gate="G$1" pin="+IN_B" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="OPA2188AIDR" constant="no"/>+          <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>

@@ -32,49 +32,49 @@         "number": "1",         "name": "OUT A",         "type": "output",-        "description": "Amplifier A output. Rail-to-rail CMOS output stage; short-circuit current +/-18 mA typical; open-loop output resistance 120 ohm at 1 MHz; drives up to 1 nF capacitive load."+        "description": "Channel A op-amp output. Rail-to-rail output stage; drives up to \u00b118 mA short-circuit current with output swing to within ~250 mV of the rails at 10 k\u03a9 load."       },       {         "number": "2",         "name": "-IN A",         "type": "input",-        "description": "Amplifier A inverting input. High-impedance CMOS input (100 MOhm || 6 pF differential); input bias current typ +/-160 pA; diode-clamped to supply rails, limit external current to 10 mA if exceeding rails by >0.5 V."+        "description": "Channel A inverting input. High-impedance CMOS input (100 M\u03a9 || 6 pF differential); diode-clamped to supply rails, limit external current to \u226410 mA if signal exceeds V- to V+ by more than 0.5 V."       },       {         "number": "3",         "name": "+IN A",         "type": "input",-        "description": "Amplifier A non-inverting input. Input common-mode range extends from V- to (V+)-1.5 V; input bias current typ +/-160 pA; diode-clamped to supply rails."+        "description": "Channel A non-inverting input. Common-mode range extends from V- to (V+)-1.5 V; input bias current \u00b1160 pA typical."       },       {         "number": "4",         "name": "V-",         "type": "power_in",-        "description": "Negative supply rail. Single-supply operation: connect to GND (0 V) with V+ from +4 V to +36 V. Dual-supply operation: -2 V to -18 V. Bypass locally with 0.1 uF close to the pin. Shared between both amplifiers A and B."+        "description": "Negative supply rail. Connect to ground for single-supply operation or to the negative rail for split supply. Total supply range 4 V to 36 V (\u00b12 V to \u00b118 V)."       },       {         "number": "5",         "name": "+IN B",         "type": "input",-        "description": "Amplifier B non-inverting input. Input common-mode range extends from V- to (V+)-1.5 V; input bias current typ +/-160 pA; diode-clamped to supply rails."+        "description": "Channel B non-inverting input. Common-mode range extends from V- to (V+)-1.5 V; input bias current \u00b1160 pA typical."       },       {         "number": "6",         "name": "-IN B",         "type": "input",-        "description": "Amplifier B inverting input. High-impedance CMOS input (100 MOhm || 6 pF differential); input bias current typ +/-160 pA; diode-clamped to supply rails, limit external current to 10 mA if exceeding rails by >0.5 V."+        "description": "Channel B inverting input. High-impedance CMOS input (100 M\u03a9 || 6 pF differential); diode-clamped to supply rails, limit external current to \u226410 mA if signal exceeds V- to V+ by more than 0.5 V."       },       {         "number": "7",         "name": "OUT B",         "type": "output",-        "description": "Amplifier B output. Rail-to-rail CMOS output stage; short-circuit current +/-18 mA typical; open-loop output resistance 120 ohm at 1 MHz; drives up to 1 nF capacitive load."+        "description": "Channel B op-amp output. Rail-to-rail output stage; drives up to \u00b118 mA short-circuit current with output swing to within ~250 mV of the rails at 10 k\u03a9 load."       },       {         "number": "8",         "name": "V+",         "type": "power_in",-        "description": "Positive supply rail. Operating range +4 V to +36 V single-supply (or +2 V to +18 V dual). Quiescent current 415 uA per amplifier typ (475 uA max) at Vs = +/-18 V. Bypass locally with 0.1 uF close to the pin. Shared between both amplifiers A and B."+        "description": "Positive supply rail. Bypass with 100 nF close to the pin. Total supply range 4 V to 36 V (\u00b12 V to \u00b118 V); quiescent current 475 \u00b5A maximum per amplifier."       }     ],     "provenance": {@@ -138,8 +138,5 @@     "docs/opa2188aidr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file