opa211aidr

@@ -33,5 +33,79 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "OPA211AIDR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Precision OpAmps",+    "datasheet": "https://www.ti.com/lit/ds/symlink/opa211a.pdf",+    "parts": {+      "symbol": "opa211aidr.kicad_sym",+      "footprint": "opa211aidr.kicad_mod",+      "model_3d": "opa211aidr-etched.glb",+      "model_3d_plain": "opa211aidr.glb",+      "model_3d_step": "opa211aidr-etched.step",+      "model_3d_step_plain": "opa211aidr.step",+      "lbr": "opa211aidr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. May be left floating or tied to any voltage between V- and V+."+      },+      {+        "number": "2",+        "name": "-IN",+        "type": "input",+        "description": "Inverting input of the op-amp. Common-mode input range extends to (V-)+1.5 V and up to (V+)-2 V; input bias current typ ±60 nA."+      },+      {+        "number": "3",+        "name": "+IN",+        "type": "input",+        "description": "Non-inverting input of the op-amp. Common-mode input range extends to (V-)+1.5 V and up to (V+)-2 V; input bias current typ ±60 nA."+      },+      {+        "number": "4",+        "name": "V-",+        "type": "power_in",+        "description": "Negative supply rail. Operates from -18 V to -2.25 V for split supplies, or 0 V (GND) for single-supply operation up to 36 V total across V+ and V-. Bypass to V+ with 0.1 µF ceramic close to the pins."+      },+      {+        "number": "5",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. May be left floating or tied to any voltage between V- and V+."+      },+      {+        "number": "6",+        "name": "OUT",+        "type": "output",+        "description": "Rail-to-rail amplifier output. Sources/sinks up to ±30 mA short-circuit; output swings to within ~600 mV of each rail at 10 mA load. Slew rate 27 V/µs."+      },+      {+        "number": "7",+        "name": "V+",+        "type": "power_in",+        "description": "Positive supply rail. Operates from +2.25 V to +18 V for split supplies, or 4.5 V to 36 V single-supply (referenced to V-). Bypass to V- with 0.1 µF ceramic close to the pins. Typical supply current 3.6 mA per channel."+      },+      {+        "number": "8",+        "name": "Shutdown",+        "type": "input",+        "description": "Active-high shutdown control. Device enabled when (V-) ≤ V_SHUTDOWN ≤ (V+)-3 V; device disabled when V_SHUTDOWN ≥ (V+)-0.35 V. Reduces supply current when asserted."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}