op07crz

@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "OP07CRZ",+    "manufacturer": "HTCSEMI",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Operational Amplifier",+    "parts": {+      "symbol": "op07crz.kicad_sym",+      "footprint": "op07crz.kicad_mod",+      "model_3d": "op07crz-etched.glb",+      "model_3d_plain": "op07crz.glb",+      "model_3d_step": "op07crz-etched.step",+      "model_3d_step_plain": "op07crz.step",+      "lbr": "op07crz.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "Offset Null 1",+        "type": "passive",+        "description": "Offset null trim pin 1. Connect a 20kΩ potentiometer between Offset Null 1 (pin 1) and Offset Null 2 (pin 8) with the wiper tied to VCC+ to trim the input offset voltage to zero."+      },+      {+        "number": "2",+        "name": "Inverting Input",+        "type": "input",+        "description": "Inverting (-) analog input of the op-amp. Differential input voltage rating ±30V; common-mode input range typically ±13.5V with ±15V supplies. Differential input resistance 33MΩ."+      },+      {+        "number": "3",+        "name": "Non-inverting Input",+        "type": "input",+        "description": "Non-inverting (+) analog input of the op-amp. Input bias current 1.8nA typical, common-mode input resistance 120GΩ, common-mode rejection 120dB typical."+      },+      {+        "number": "4",+        "name": "VCC-",+        "type": "power_in",+        "description": "Negative supply pin. Operates from ±3V to ±22V split supplies (absolute maximum ±22V). Tie to ground for single-supply operation where the input range permits."+      },+      {+        "number": "5",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or optionally tie to ground; do not use as a signal tie-point."+      },+      {+        "number": "6",+        "name": "Output",+        "type": "output",+        "description": "Op-amp output. Typical output swing ±13V into RL=10kΩ with ±15V supplies, open-loop output resistance 60Ω, slew rate 0.17V/µs, gain-bandwidth product 0.5MHz."+      },+      {+        "number": "7",+        "name": "VCC+",+        "type": "power_in",+        "description": "Positive supply pin. Operates from ±3V to ±22V split supplies (absolute maximum ±22V). Typical supply current 2.7mA (no load) at ±15V."+      },+      {+        "number": "8",+        "name": "Offset Null 2",+        "type": "passive",+        "description": "Offset null trim pin 2. Used with Offset Null 1 (pin 1) via a 20kΩ potentiometer whose wiper connects to VCC+ to null the input offset voltage."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}