component
OP07CP
Public Made by Adomby adom
Texas Instruments Precision OpAmps, PDIP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (DIGIKEY_PN 296-12853-5-ND, LCSC_PN C5224). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+23−13
op07cp.lbr+12−5@@ -96,11 +96,11 @@ <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="5.08" width="0.254" layer="94"/> <text x="0" y="7.62" size="1.27" layer="95" align="bottom-center">>NAME</text> <text x="0" y="-10.16" size="1.27" layer="96" align="top-center">>VALUE</text>- <pin name="OFFSET N1" x="-17.78" y="2.54" length="middle" direction="pas"/>+ <pin name="OFFSET_N1" x="-17.78" y="2.54" length="middle" direction="pas"/> <pin name="IN-" x="-17.78" y="0" length="middle" direction="in"/> <pin name="IN+" x="-17.78" y="-2.54" length="middle" direction="in"/> <pin name="VCC-" x="-17.78" y="-5.08" length="middle" direction="pwr"/>- <pin name="OFFSET N2" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+ <pin name="OFFSET_N2" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/> <pin name="VCC+" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> <pin name="OUT" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/> <pin name="NC" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>@@ -115,16 +115,23 @@ <devices> <device name="" package="OP07CP"> <connects>- <connect gate="G$1" pin="OFFSET N1" pad="1"/>+ <connect gate="G$1" pin="OFFSET_N1" pad="1"/> <connect gate="G$1" pin="IN-" pad="2"/> <connect gate="G$1" pin="IN+" pad="3"/> <connect gate="G$1" pin="VCC-" pad="4"/>- <connect gate="G$1" pin="OFFSET N2" pad="8"/>+ <connect gate="G$1" pin="OFFSET_N2" pad="8"/> <connect gate="G$1" pin="VCC+" pad="7"/> <connect gate="G$1" pin="OUT" pad="6"/> <connect gate="G$1" pin="NC" pad="5"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="OP07CP" constant="no"/>+ <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+ <attribute name="DIGIKEY_PN" value="296-12853-5-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C5224" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+11−8@@ -26,31 +26,34 @@ "model_3d_step": "op07cp.step", "lbr": "op07cp.lbr" },- "distributor_links": {},+ "distributor_links": {+ "digikey": "296-12853-5-ND",+ "lcsc": "C5224"+ }, "pins": [ { "number": "1", "name": "OFFSET N1", "type": "passive",- "description": "Offset null terminal 1. Connect a 20 kΩ potentiometer between OFFSET N1 (pin 1) and OFFSET N2 (pin 8) with the wiper tied to VCC+ to null the input offset voltage. Offset adjustment range is ±4 mV typ with Rs = 20 kΩ."+ "description": "Offset null terminal 1. Connect a 20 k\u03a9 potentiometer between OFFSET N1 (pin 1) and OFFSET N2 (pin 8) with the wiper tied to VCC+ to null the input offset voltage. Offset adjustment range is \u00b14 mV typ with Rs = 20 k\u03a9." }, { "number": "2", "name": "IN-", "type": "input",- "description": "Inverting input of the op-amp. Common-mode input voltage range ±13 V (typ ±14 V) at VCC± = ±15 V; input bias current ±1.8 nA typ; input resistance 33 MΩ typ. Differential input voltage must not exceed ±30 V."+ "description": "Inverting input of the op-amp. Common-mode input voltage range \u00b113 V (typ \u00b114 V) at VCC\u00b1 = \u00b115 V; input bias current \u00b11.8 nA typ; input resistance 33 M\u03a9 typ. Differential input voltage must not exceed \u00b130 V." }, { "number": "3", "name": "IN+", "type": "input",- "description": "Non-inverting input of the op-amp. Common-mode input voltage range ±13 V (typ ±14 V) at VCC± = ±15 V; input bias current ±1.8 nA typ; input resistance 33 MΩ typ."+ "description": "Non-inverting input of the op-amp. Common-mode input voltage range \u00b113 V (typ \u00b114 V) at VCC\u00b1 = \u00b115 V; input bias current \u00b11.8 nA typ; input resistance 33 M\u03a9 typ." }, { "number": "4", "name": "VCC-", "type": "power_in",- "description": "Negative supply rail. Recommended operating range −3 V to −18 V; absolute maximum −22 V. Together with VCC+ powers the op-amp; total supply typically ±15 V for characterization."+ "description": "Negative supply rail. Recommended operating range \u22123 V to \u221218 V; absolute maximum \u221222 V. Together with VCC+ powers the op-amp; total supply typically \u00b115 V for characterization." }, { "number": "5",@@ -62,19 +65,19 @@ "number": "6", "name": "OUT", "type": "output",- "description": "Op-amp output. Peak output voltage ±13 V typ (RL ≥ 10 kΩ) at VCC± = ±15 V; large-signal voltage amplification 400 V/mV typ; slew rate 0.3 V/µs; unity-gain bandwidth 0.6 MHz typ. Short-circuit to ground or either supply is permitted indefinitely."+ "description": "Op-amp output. Peak output voltage \u00b113 V typ (RL \u2265 10 k\u03a9) at VCC\u00b1 = \u00b115 V; large-signal voltage amplification 400 V/mV typ; slew rate 0.3 V/\u00b5s; unity-gain bandwidth 0.6 MHz typ. Short-circuit to ground or either supply is permitted indefinitely." }, { "number": "7", "name": "VCC+", "type": "power_in",- "description": "Positive supply rail. Recommended operating range +3 V to +18 V; absolute maximum +22 V. Also serves as the wiper reference for the external 20 kΩ offset-null potentiometer."+ "description": "Positive supply rail. Recommended operating range +3 V to +18 V; absolute maximum +22 V. Also serves as the wiper reference for the external 20 k\u03a9 offset-null potentiometer." }, { "number": "8", "name": "OFFSET N2", "type": "passive",- "description": "Offset null terminal 2. Connect a 20 kΩ potentiometer between OFFSET N1 (pin 1) and OFFSET N2 (pin 8) with the wiper tied to VCC+ to null the input offset voltage."+ "description": "Offset null terminal 2. Connect a 20 k\u03a9 potentiometer between OFFSET N1 (pin 1) and OFFSET N2 (pin 8) with the wiper tied to VCC+ to null the input offset voltage." } ], "provenance": {