component
OP07CDRG
Public Made by Adomby adom
HANSCHIP semiconductor Operational Amplifier, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C2977079). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+38−18
op07cdrg.lbr+28−10@@ -62,6 +62,18 @@ <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1"/> <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/> <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-2.6000" y="2.4700"/>+ <vertex x="-2.8400" y="2.8000"/>+ <vertex x="-2.3600" y="2.8000"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.9750" y="2.4500"/>+ <vertex x="1.9500" y="2.4500"/>+ <vertex x="1.9500" y="-2.4500"/>+ <vertex x="-1.9500" y="-2.4500"/>+ <vertex x="-1.9500" y="1.4750"/>+ </polygon> <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/> <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/> <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -70,7 +82,7 @@ <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/> <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="OP07CDRG">@@ -80,11 +92,11 @@ <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="5.08" width="0.254" layer="94"/> <text x="0" y="7.62" size="1.27" layer="95" align="bottom-center">>NAME</text> <text x="0" y="-10.16" size="1.27" layer="96" align="top-center">>VALUE</text>- <pin name="Offset Null 1" x="-17.78" y="2.54" length="middle" direction="pas"/>- <pin name="Inverting Input" x="-17.78" y="0" length="middle" direction="in"/>- <pin name="Non-inverting Input" x="-17.78" y="-2.54" length="middle" direction="in"/>+ <pin name="Offset_Null_1" x="-17.78" y="2.54" length="middle" direction="pas"/>+ <pin name="Inverting_Input" x="-17.78" y="0" length="middle" direction="in"/>+ <pin name="Non-inverting_Input" x="-17.78" y="-2.54" length="middle" direction="in"/> <pin name="VCC-" x="-17.78" y="-5.08" length="middle" direction="pwr"/>- <pin name="Offset Null 2" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+ <pin name="Offset_Null_2" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/> <pin name="VCC+" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> <pin name="Output" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/> <pin name="N.C." x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>@@ -99,16 +111,22 @@ <devices> <device name="" package="OP07CDRG"> <connects>- <connect gate="G$1" pin="Offset Null 1" pad="1"/>- <connect gate="G$1" pin="Inverting Input" pad="2"/>- <connect gate="G$1" pin="Non-inverting Input" pad="3"/>+ <connect gate="G$1" pin="Offset_Null_1" pad="1"/>+ <connect gate="G$1" pin="Inverting_Input" pad="2"/>+ <connect gate="G$1" pin="Non-inverting_Input" pad="3"/> <connect gate="G$1" pin="VCC-" pad="4"/>- <connect gate="G$1" pin="Offset Null 2" pad="8"/>+ <connect gate="G$1" pin="Offset_Null_2" pad="8"/> <connect gate="G$1" pin="VCC+" pad="7"/> <connect gate="G$1" pin="Output" pad="6"/> <connect gate="G$1" pin="N.C." pad="5"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="OP07CDRG" constant="no"/>+ <attribute name="MANUFACTURER" value="HANSCHIP semiconductor" constant="no"/>+ <attribute name="LCSC_PN" value="C2977079" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+10−8@@ -26,31 +26,33 @@ "model_3d_step": "op07cdrg.step", "lbr": "op07cdrg.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C2977079"+ }, "pins": [ { "number": "1", "name": "Offset Null 1", "type": "passive",- "description": "Offset nulling terminal 1. Connect one end of a 20 kΩ potentiometer here; wiper goes to VCC+ (see Figure 2). Used together with pin 8 to trim the residual input offset voltage."+ "description": "Offset nulling terminal 1. Connect one end of a 20 k\u03a9 potentiometer here; wiper goes to VCC+ (see Figure 2). Used together with pin 8 to trim the residual input offset voltage." }, { "number": "2", "name": "Inverting Input", "type": "input",- "description": "Inverting analog input (−) of the op-amp. Differential input voltage rating ±30 V, single-ended input voltage rating ±16 V. Differential input resistance ~33 MΩ typical."+ "description": "Inverting analog input (\u2212) of the op-amp. Differential input voltage rating \u00b130 V, single-ended input voltage rating \u00b116 V. Differential input resistance ~33 M\u03a9 typical." }, { "number": "3", "name": "Non-inverting Input", "type": "input",- "description": "Non-inverting analog input (+) of the op-amp. Differential input voltage rating ±30 V, single-ended input voltage rating ±16 V. Input common-mode range typically ±13.5 V at ±15 V supply."+ "description": "Non-inverting analog input (+) of the op-amp. Differential input voltage rating \u00b130 V, single-ended input voltage rating \u00b116 V. Input common-mode range typically \u00b113.5 V at \u00b115 V supply." }, { "number": "4", "name": "VCC-", "type": "power_in",- "description": "Negative supply rail. Together with VCC+ supports a total supply range of ±3 V to ±16 V. Typical quiescent supply current 2.7 mA (5 mA max)."+ "description": "Negative supply rail. Together with VCC+ supports a total supply range of \u00b13 V to \u00b116 V. Typical quiescent supply current 2.7 mA (5 mA max)." }, { "number": "5",@@ -62,19 +64,19 @@ "number": "6", "name": "Output", "type": "output",- "description": "Op-amp output. Typical output voltage swing ±13 V into 10 kΩ, ±12.8 V into 2 kΩ (at ±15 V supply). Open-loop output resistance ~60 Ω; slew rate 0.17 V/µs typical."+ "description": "Op-amp output. Typical output voltage swing \u00b113 V into 10 k\u03a9, \u00b112.8 V into 2 k\u03a9 (at \u00b115 V supply). Open-loop output resistance ~60 \u03a9; slew rate 0.17 V/\u00b5s typical." }, { "number": "7", "name": "VCC+", "type": "power_in",- "description": "Positive supply rail. Together with VCC- supports a total supply range of ±3 V to ±16 V. Also serves as the reference tap for the offset-null potentiometer (see Figure 2)."+ "description": "Positive supply rail. Together with VCC- supports a total supply range of \u00b13 V to \u00b116 V. Also serves as the reference tap for the offset-null potentiometer (see Figure 2)." }, { "number": "8", "name": "Offset Null 2", "type": "passive",- "description": "Offset nulling terminal 2. Connect the other end of a 20 kΩ potentiometer here; wiper to VCC+ (see Figure 2). Used with pin 1 to trim residual input offset voltage."+ "description": "Offset nulling terminal 2. Connect the other end of a 20 k\u03a9 potentiometer here; wiper to VCC+ (see Figure 2). Used with pin 1 to trim residual input offset voltage." } ], "provenance": {