← Commit history

op07brz: factory component page (tier=lcsc)

Ray ·ac6e4296f0 · ·parent ff2a0d6
3 files changed +26−27
README.md+8−12
@@ -8,14 +8,14 @@ OP07BRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | Offset Null 1 | passive | Input offset voltage nulling terminal 1. Connect one end of a 20kΩ potentiometer here; the other end goes to Offset Null 2 (pin 8) with the wiper tied to VCC+ to null the input offset voltage. |-| 2 | Inverting Input | input | Inverting input (IN-) of the op-amp. Differential input voltage max ±30V; input voltage max ±22V. Differential input resistance 33MΩ typ. |-| 3 | Non-inverting Input | input | Non-inverting input (IN+) of the op-amp. Input common-mode range typically ±13.5V on ±15V supplies. Input bias current 1.8nA typ. |-| 4 | VCC- | power_in | Negative supply rail. Operating supply range ±3V to ±22V (single-supply or split). Absolute maximum ±22V. Quiescent supply current 2.7mA typ (no load). |-| 5 | N.C. | unconnected | No internal connection. Leave floating or tie to ground for improved routing; no electrical function. |-| 6 | Output | output | Amplifier output. Open-loop output resistance 60Ω. Output swing typ ±13V into 10kΩ (±11V min into 2kΩ) on ±15V supplies. Slew rate 0.17V/µs; GBP 0.5MHz. |-| 7 | VCC+ | power_in | Positive supply rail. Operating supply range ±3V to ±22V. Absolute maximum ±22V. Also serves as the pull-up node for the offset-null potentiometer wiper. |-| 8 | Offset Null 2 | passive | Input offset voltage nulling terminal 2. Connect between this pin and Offset Null 1 (pin 1) a 20kΩ potentiometer with its wiper tied to VCC+ to trim the input offset voltage. |+| 1 | Offset Null 1 | passive | Input offset voltage nulling terminal 1. Connect to one end of an external 20kΩ trim potentiometer whose wiper returns to VCC+ (per Figure 2) to null the input offset voltage. |+| 2 | Inverting Input | input | Inverting analog input (-) of the op-amp. Differential input voltage rating is ±30V and input voltage rating is ±22V. |+| 3 | Non-inverting Input | input | Non-inverting analog input (+) of the op-amp. Differential input voltage rating is ±30V and input voltage rating is ±22V. |+| 4 | VCC- | power_in | Negative supply rail. Recommended supply range ±3V to ±22V (absolute max ±22V single-ended magnitude). |+| 5 | N.C. | unconnected | No internal connection. Leave floating or tie to a convenient net. |+| 6 | Output | output | Op-amp output. Typical output swing ±13V into RL=10kΩ with ±15V supplies; open-loop output resistance 60Ω; slew rate 0.17V/µs. |+| 7 | VCC+ | power_in | Positive supply rail. Recommended supply range ±3V to ±22V (absolute max ±22V single-ended magnitude). Also serves as the return for the offset-null trim potentiometer wiper. |+| 8 | Offset Null 2 | passive | Input offset voltage nulling terminal 2. Connect to the other end of the external 20kΩ trim potentiometer whose wiper returns to VCC+ (per Figure 2) to null the input offset voltage. |  ## Key specifications @@ -26,10 +26,6 @@ OP07BRZ from HTCSEMI, in a SOP-8. Pinout and pin descriptions extracted from the | Category | Op-amp/Cmp | | Pins | 8 | -## Ordering variants--- `OP07BRZRZ`- ## CAD (KiCad official)  - Symbol: `OP07BRZ`
op07brz.lbr+9−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>HTCSEMI Operational Amplifier, SOP-8</description> <packages> <package name="SOIC-8_3.9x4.9mm_P1.27mm">   <description>SOIC-8, 3.9 x 4.9 mm, 1.27 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="OP07BRZ">+  <description>HTCSEMI Operational Amplifier, SOP-8</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -104,7 +105,7 @@ </symbols> <devicesets> <deviceset name="OP07BRZ" prefix="U">-  <description></description>+  <description>HTCSEMI Operational Amplifier, SOP-8</description>   <gates>     <gate name="G$1" symbol="OP07BRZ" x="0" y="0"/>   </gates>@@ -120,7 +121,12 @@         <connect gate="G$1" pin="Output" pad="6"/>         <connect gate="G$1" pin="N.C." pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="OP07BRZ" constant="no"/>+          <attribute name="MANUFACTURER" value="HTCSEMI" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
page.json+9−12
@@ -32,49 +32,49 @@         "number": "1",         "name": "Offset Null 1",         "type": "passive",-        "description": "Input offset voltage nulling terminal 1. Connect one end of a 20kΩ potentiometer here; the other end goes to Offset Null 2 (pin 8) with the wiper tied to VCC+ to null the input offset voltage."+        "description": "Input offset voltage nulling terminal 1. Connect to one end of an external 20k\u03a9 trim potentiometer whose wiper returns to VCC+ (per Figure 2) to null the input offset voltage."       },       {         "number": "2",         "name": "Inverting Input",         "type": "input",-        "description": "Inverting input (IN-) of the op-amp. Differential input voltage max ±30V; input voltage max ±22V. Differential input resistance 33MΩ typ."+        "description": "Inverting analog input (-) of the op-amp. Differential input voltage rating is \u00b130V and input voltage rating is \u00b122V."       },       {         "number": "3",         "name": "Non-inverting Input",         "type": "input",-        "description": "Non-inverting input (IN+) of the op-amp. Input common-mode range typically ±13.5V on ±15V supplies. Input bias current 1.8nA typ."+        "description": "Non-inverting analog input (+) of the op-amp. Differential input voltage rating is \u00b130V and input voltage rating is \u00b122V."       },       {         "number": "4",         "name": "VCC-",         "type": "power_in",-        "description": "Negative supply rail. Operating supply range ±3V to ±22V (single-supply or split). Absolute maximum ±22V. Quiescent supply current 2.7mA typ (no load)."+        "description": "Negative supply rail. Recommended supply range \u00b13V to \u00b122V (absolute max \u00b122V single-ended magnitude)."       },       {         "number": "5",         "name": "N.C.",         "type": "unconnected",-        "description": "No internal connection. Leave floating or tie to ground for improved routing; no electrical function."+        "description": "No internal connection. Leave floating or tie to a convenient net."       },       {         "number": "6",         "name": "Output",         "type": "output",-        "description": "Amplifier output. Open-loop output resistance 60Ω. Output swing typ ±13V into 10kΩ (±11V min into 2kΩ) on ±15V supplies. Slew rate 0.17V/µs; GBP 0.5MHz."+        "description": "Op-amp output. Typical output swing \u00b113V into RL=10k\u03a9 with \u00b115V supplies; open-loop output resistance 60\u03a9; slew rate 0.17V/\u00b5s."       },       {         "number": "7",         "name": "VCC+",         "type": "power_in",-        "description": "Positive supply rail. Operating supply range ±3V to ±22V. Absolute maximum ±22V. Also serves as the pull-up node for the offset-null potentiometer wiper."+        "description": "Positive supply rail. Recommended supply range \u00b13V to \u00b122V (absolute max \u00b122V single-ended magnitude). Also serves as the return for the offset-null trim potentiometer wiper."       },       {         "number": "8",         "name": "Offset Null 2",         "type": "passive",-        "description": "Input offset voltage nulling terminal 2. Connect between this pin and Offset Null 1 (pin 1) a 20kΩ potentiometer with its wiper tied to VCC+ to trim the input offset voltage."+        "description": "Input offset voltage nulling terminal 2. Connect to the other end of the external 20k\u03a9 trim potentiometer whose wiper returns to VCC+ (per Figure 2) to null the input offset voltage."       }     ],     "provenance": {@@ -138,8 +138,5 @@     "docs/op07brz-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file