← Commit history

Initial commit: component/oc5228

Ray ·244e0f03a4 ·
2 files changed +78
README.mdadded+44
@@ -0,0 +1,44 @@+# OC5228++**OCX** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOP-8++OC5228 from OCX, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | LD | input | Analog / segmented dimming control input. Floating = full brightness (high mode); tied to VDD = 1/2 current low-brightness mode; 0.2V-1.2V analog input sets output current (linear analog dimming); below 0.2V shuts output off. Can also accept PWM with high level > 1.2V. Internal 20uA pull-down (ILD_F) supports segmented dimming. |+| 2 | PWM | input | PWM dimming input. High level enables output, low disables it; supports ultra-small duty ratios with a minimum response pulse width of 60ns. Rising threshold VPWM_H = 1.4V typ, falling VDIM_L = 0.8V typ. Pin floats to logic-high (output enabled) by default. |+| 3 | VDD | power_in | Chip supply pin. Powered via an external bleeder resistor R3 from VIN; internally clamped by a 5.5V shunt (VDDCLAMP typ 5.5V, IDDCLAMP max 10mA). Startup occurs when VDD reaches ~4.1V. Requires >=1.0uF bypass capacitor placed close to the pin. Operating current IDD ~2.5mA at VDD = 5.5V; quiescent IVDDQ ~1.2mA. |+| 4 | CS | input | Current-sense input. Connects to the source-side sense resistor Rcs; output current is regulated to Iout = 0.2V / Rcs. Constant-current reference VREF = 200mV typ (192-208mV); over-current threshold VCS = 216-264mV. Leading-edge blanking TLEB = 120ns typ. Absolute max VCS = -0.3 to 7.0V. |+| 5 | D | output | Drain of the internal 100V / 2A power MOSFET (switching node). RDS(on) = 200 mOhm typ at VGS = 5.5V; VDS rating 100V. Pins 5 and 6 are tied together internally and both must be connected to the inductor / freewheel-diode switch node. |+| 6 | D | output | Drain of the internal 100V / 2A power MOSFET (switching node), tied to pin 5. Connect both D pins together to the inductor / catch-diode node to share switch current. |+| 7 | GND | power_in | Device ground / power return. Pins 7 and 8 are both GND and should be tied together to the system ground plane close to the CS sense resistor to minimize sense-loop noise. |+| 8 | GND | power_in | Device ground / power return, tied to pin 7. Provides the return for internal control and MOS driver. Both GND pins must be connected on the board. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | OCX |+| Package | SOP-8 |+| Category | PMIC |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `OC5228`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [OCX datasheet](docs/oc5228-datasheet.pdf) (None pp, sha256 `1fb6ab4263618d59`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/oc5228-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "oc5228",+  "version": "0.1.0",+  "type": "component",+  "description": "OCX Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "oc5228"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "oc5228.kicad_sym",+    "oc5228.kicad_mod",+    "oc5228.glb",+    "oc5228.step",+    "oc5228.lbr",+    "docs/hero.png",+    "docs/oc5228-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file