← Commit history

ob2500ncpa: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·481fb52248 · ·parent 1d6221f
1 file changed +68−1
page.json+68−1
@@ -33,5 +33,72 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "OB2500NCPA",+    "manufacturer": "OB On Bright Elec",+    "package": "SOP-7",+    "pin_count": 7,+    "category": "AC-DC Controllers and Regulators",+    "parts": {+      "symbol": "ob2500ncpa.kicad_sym",+      "footprint": "ob2500ncpa.kicad_mod",+      "model_3d": "ob2500ncpa-etched.glb",+      "model_3d_plain": "ob2500ncpa.glb",+      "model_3d_step": "ob2500ncpa-etched.step",+      "model_3d_step_plain": "ob2500ncpa.step",+      "lbr": "ob2500ncpa.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VDD",+        "type": "power_in",+        "description": "Chip power supply. Recommended operating range 8 V to 25 V; UVLO_ON ≈ 7.0 V, UVLO_OFF ≈ 18.2 V, VDD OVP ≈ 27 V. Typically fed from a transformer auxiliary winding via a rectifier and hold-up capacitor after start-up."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "Voltage feedback input from the auxiliary winding. Connected to a resistor divider that reflects the output voltage; the sample is compared against Vref = 2.500 V for CV regulation and used for programmable cable-drop compensation and CC-mode shutdown (< 1.55 V for 1024-2048 cycles)."+      },+      {+        "number": "3",+        "name": "RT",+        "type": "input",+        "description": "External over-temperature sense input. Connect an NTC thermistor from RT to GND; an internal ~72 µA source current develops a voltage, and OTP triggers when V(RT) falls below ~1.0 V."+      },+      {+        "number": "4",+        "name": "CS",+        "type": "input",+        "description": "Current-sense input tied to the internal power MOSFET source. Connect an external sense resistor Rs from CS to GND to program the peak switch current and CC set-point; OCP threshold ranges from 500 mV (min) up to 590 mV (max) with on-time slope compensation. Includes an internal 300 ns leading-edge blanking."+      },+      {+        "number": "5",+        "name": "Drain",+        "type": "output",+        "description": "Drain of the integrated 650 V / 1 A power MOSFET (Rds(on) ≈ 9 Ω). Connected to the transformer primary winding. Pins 5 and 6 are both tied to the same internal drain node and should be paralleled on the PCB for thermal dissipation."+      },+      {+        "number": "6",+        "name": "Drain",+        "type": "output",+        "description": "Second bond to the drain of the integrated 650 V / 1 A power MOSFET. Tied internally to pin 5; both must be connected to the primary winding node and used together for current handling and heat sinking."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference and MOSFET source-return / control-ground."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}