← Commit history
ob2358ap: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "OB2358AP",+ "manufacturer": "OB On Bright Elec",+ "package": "DIP-8",+ "pin_count": 8,+ "category": "AC-DC Controllers and Regulators",+ "parts": {+ "symbol": "ob2358ap.kicad_sym",+ "footprint": "ob2358ap.kicad_mod",+ "model_3d": "ob2358ap-etched.glb",+ "model_3d_plain": "ob2358ap.glb",+ "model_3d_step": "ob2358ap-etched.step",+ "model_3d_step_plain": "ob2358ap.step",+ "lbr": "ob2358ap.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD-G",+ "type": "power_in",+ "description": "Internal gate driver power supply. An external resistor between VDD and VDD-G can adjust the internal gate drive strength / Drain falling-edge slope for EMI optimization. Absolute maximum input: -0.3V to 30V."+ },+ {+ "number": "2",+ "name": "VDD",+ "type": "power_in",+ "description": "IC DC power-supply input, typically fed from the transformer auxiliary winding. UVLO_OFF (start) ≈15.8V, UVLO_ON (stop) ≈9.7V; internal Zener clamp at ~30V (10 mA continuous max). Startup current ~5 µA, operating current ~1.6 mA."+ },+ {+ "number": "3",+ "name": "FB",+ "type": "input",+ "description": "Feedback input from the opto-coupler. PWM duty cycle is set by the FB voltage together with the SENSE signal. Open-loop voltage ~5.7V, zero-duty threshold ~0.8V, input impedance ~4kΩ. Absolute max: -0.3V to 7V."+ },+ {+ "number": "4",+ "name": "SENSE",+ "type": "input",+ "description": "Current-sense input from the source resistor of the internal power MOSFET, providing cycle-by-cycle current limiting. Internal current-limit threshold ~0.77V (FB=3.3V) with 270ns leading-edge blanking; input impedance ~40kΩ. Absolute max: -0.3V to 7V."+ },+ {+ "number": "5",+ "name": "Drain",+ "type": "output",+ "description": "High-voltage drain of the integrated 600V power MOSFET, connected to the primary winding of the flyback transformer. Pins 5 and 6 are internally tied together and typically bonded to a PCB copper area used as a heatsink."+ },+ {+ "number": "6",+ "name": "Drain",+ "type": "output",+ "description": "High-voltage drain of the integrated 600V power MOSFET (paralleled with pin 5). Used to spread current/heat; typically bonded to a copper heatsink area."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return for the controller and source of the internal power MOSFET. Pins 7 and 8 are internally connected; tie together on the PCB."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground return (paralleled with pin 7). Serves both signal and power MOSFET source return."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}