← Commit history
ob2223cpa: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "OB2223CPA",+ "manufacturer": "OB On Bright Elec",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "AC-DC Controllers and Regulators",+ "parts": {+ "symbol": "ob2223cpa.kicad_sym",+ "footprint": "ob2223cpa.kicad_mod",+ "model_3d": "ob2223cpa-etched.glb",+ "model_3d_plain": "ob2223cpa.glb",+ "model_3d_step": "ob2223cpa-etched.step",+ "model_3d_step_plain": "ob2223cpa.step",+ "lbr": "ob2223cpa.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply pin and output voltage feedback input. Regulated to 12.5V in normal operation; UVLO on/off at ~7.0V/12.5V; OVP at 25V; absolute max -0.3 to 40V."+ },+ {+ "number": "2",+ "name": "COMP",+ "type": "input",+ "description": "Loop compensation pin. Connect a capacitor from this pin to GND to set the error-amplifier / control-network response. Absolute max -0.3 to 7V."+ },+ {+ "number": "3",+ "name": "ENB",+ "type": "input",+ "description": "Enable / mode select input. Connect to GND for 12V output operation. Absolute max -0.3 to 7V."+ },+ {+ "number": "4",+ "name": "CS",+ "type": "input",+ "description": "Current-sense input from the MOSFET source-side sense resistor for cycle-by-cycle current limiting. Over-current threshold ~925mV (890/960mV min/max), 200ns leading-edge blanking, 50kΩ input impedance. Absolute max -0.3 to 7V."+ },+ {+ "number": "5",+ "name": "DRAIN",+ "type": "output",+ "description": "High-voltage MOSFET drain pin (600V BVdss, ~25Ω Rdson typ. in SOP8). Connected to the primary side of the inductor/transformer. Pins 5 and 6 are internally shorted."+ },+ {+ "number": "6",+ "name": "DRAIN",+ "type": "output",+ "description": "High-voltage MOSFET drain pin (600V BVdss, ~25Ω Rdson typ. in SOP8). Connected to the primary side of the inductor/transformer. Pins 5 and 6 are internally shorted."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground / MOSFET source reference. Pins 7 and 8 are internally connected."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground / MOSFET source reference. Pins 7 and 8 are internally connected."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}