← Commit history
nuc029fae: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+146−1
page.json+146−1@@ -33,5 +33,150 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "NUC029FAE",+ "manufacturer": "Nuvoton Tech",+ "package": "TSSOP-20",+ "pin_count": 20,+ "category": "Microcontrollers (MCU/MPU/SOC)",+ "parts": {+ "symbol": "nuc029fae.kicad_sym",+ "footprint": "nuc029fae.kicad_mod",+ "model_3d": "nuc029fae-etched.glb",+ "model_3d_plain": "nuc029fae.glb",+ "model_3d_step": "nuc029fae-etched.step",+ "model_3d_step_plain": "nuc029fae.step",+ "lbr": "nuc029fae.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "P1.2/RXD/AIN2/ACMP0_P",+ "type": "bidirectional",+ "description": "GPIO P1.2, multiplexed with UART0 receive data (RXD), ADC channel 2 analog input (AIN2), and Comparator0 positive input (ACMP0_P)."+ },+ {+ "number": "2",+ "name": "P1.3/TXD/AIN3/ACMP0_P",+ "type": "bidirectional",+ "description": "GPIO P1.3, multiplexed with UART0 transmit data (TXD), ADC channel 3 analog input (AIN3), and Comparator0 positive input (as printed in datasheet; likely ACMP0-related analog function)."+ },+ {+ "number": "3",+ "name": "P1.4/AIN4/ACMP0_N",+ "type": "bidirectional",+ "description": "GPIO P1.4, multiplexed with ADC channel 4 analog input (AIN4) and Comparator0 negative input (ACMP0_N)."+ },+ {+ "number": "4",+ "name": "P1.5/AIN5/ACMP0_P/AVSS",+ "type": "bidirectional",+ "description": "GPIO P1.5, multiplexed with ADC channel 5 analog input (AIN5) and Comparator0 positive input (ACMP0_P). Pin description table also lists AVSS (analog ground) on this pin."+ },+ {+ "number": "5",+ "name": "nRST",+ "type": "input",+ "description": "External reset input: active LOW with an internal pull-up and Schmitt-trigger input. Drive low to reset the chip to its initial state."+ },+ {+ "number": "6",+ "name": "P3.2/nINT0/STADC/T0EX/ACMP1_P",+ "type": "bidirectional",+ "description": "GPIO P3.2, multiplexed with external interrupt 0 input (nINT0), ADC external trigger input (STADC), Timer0 external capture/reset trigger input (T0EX), and Comparator1 positive input (ACMP1_P)."+ },+ {+ "number": "7",+ "name": "P3.4/T0/SDA0/ACMP1_P",+ "type": "bidirectional",+ "description": "GPIO P3.4, multiplexed with Timer0 external event counter input (T0), I2C0 data line (SDA0), and Comparator1 positive input (ACMP1_P)."+ },+ {+ "number": "8",+ "name": "P3.5/T1/SCL0/ACMP1_P",+ "type": "bidirectional",+ "description": "GPIO P3.5, multiplexed with Timer1 external event counter input (T1), I2C0 clock line (SCL0), and Comparator1 positive input (ACMP1_P)."+ },+ {+ "number": "9",+ "name": "P5.1/XTAL2",+ "type": "bidirectional",+ "description": "GPIO P5.1, multiplexed with external 4-24 MHz high-speed crystal (HXT) output pin (XTAL2)."+ },+ {+ "number": "10",+ "name": "P5.0/XTAL1",+ "type": "bidirectional",+ "description": "GPIO P5.0, multiplexed with external 4-24 MHz high-speed crystal (HXT) input pin (XTAL1). Schmitt-trigger input on the XTAL1 function."+ },+ {+ "number": "11",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground pin for digital circuit. Connect to system ground (0 V)."+ },+ {+ "number": "12",+ "name": "P2.4/PWM2",+ "type": "bidirectional",+ "description": "GPIO P2.4, multiplexed with PWM channel 2 output (PWM2). (Datasheet mux description mentions PWM0 output on this pin - likely a typo, function is PWM2.)"+ },+ {+ "number": "13",+ "name": "P2.5/PWM3",+ "type": "bidirectional",+ "description": "GPIO P2.5, multiplexed with PWM channel 3 output (PWM3)."+ },+ {+ "number": "14",+ "name": "P4.6/ICE_CLK",+ "type": "bidirectional",+ "description": "GPIO P4.6, multiplexed with Serial Wired Debugger clock pin (ICE_CLK)."+ },+ {+ "number": "15",+ "name": "P4.7/ICE_DAT",+ "type": "bidirectional",+ "description": "GPIO P4.7, multiplexed with Serial Wired Debugger data pin (ICE_DAT)."+ },+ {+ "number": "16",+ "name": "P0.7/SPICLK0",+ "type": "bidirectional",+ "description": "GPIO P0.7, multiplexed with SPI0 serial clock (SPICLK0)."+ },+ {+ "number": "17",+ "name": "P0.6/MISO_0",+ "type": "bidirectional",+ "description": "GPIO P0.6, multiplexed with SPI0 MISO (Master In, Slave Out) data line."+ },+ {+ "number": "18",+ "name": "P0.5/MOSI_0",+ "type": "bidirectional",+ "description": "GPIO P0.5, multiplexed with SPI0 MOSI (Master Out, Slave In) data line."+ },+ {+ "number": "19",+ "name": "P0.4/SPISS0/PWM5",+ "type": "bidirectional",+ "description": "GPIO P0.4, multiplexed with SPI0 slave select (SPISS0) and PWM channel 5 output (PWM5). Datasheet mux row labels SPISS0 as 'SPI1 slave select' but this is a typo - it is SPI0 on the TSSOP-20."+ },+ {+ "number": "20",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply for I/O ports and LDO source for the internal PLL and digital circuit. Operating range 2.5-5.5 V per NUC029FAE DC characteristics."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}