← Commit history
Publish 0.1.1
7 files changed
+104−101
README.md+47−52@@ -8,14 +8,14 @@ NSM2012-20B5R-DSPR from NOVOSENSE(纳芯微), in a SOIC-8. Pinout and pin descri | Pin | Name | Type | Function | |---|---|---|---|-| 1 | IP+ | passive | Primary conductor terminal where current flows into the chip in the positive direction; pins 1 and 2 are the same IP+ terminal. |-| 2 | IP+ | passive | Primary conductor terminal where current flows into the chip in the positive direction; pins 1 and 2 are the same IP+ terminal. |-| 3 | IP- | passive | Primary conductor terminal where current flows out of the chip in the negative direction; pins 3 and 4 are the same IP- terminal. |-| 4 | IP- | passive | Primary conductor terminal where current flows out of the chip in the negative direction; pins 3 and 4 are the same IP- terminal. |-| 5 | GND | power_in | Power supply ground (电源地) for the device. |-| 6 | VREF/NC | power_in | Not connected on the R (ratiometric) version, where the internal amplifier output is disconnected and the customer may optionally tie it to ground; it is VREF only on the F (fixed-output) version. |-| 7 | Vout | output | Analog output voltage proportional to the primary current on the R version, with a zero-current level of VCC/2 for the bidirectional type. |-| 8 | VCC | power_in | Supply input; 4.5 V to 5.5 V for the 5 V version (the part number suffix 5B5R indicates a 5 V supply, per the Order Information table). |+| 1 | IP+ | passive | Primary current terminal where current flows into the chip, defined as the positive direction; datasheet lists pins 1-2 together as IP+ (rated for 5 V version, primary on-resistance 1.2 mΩ typ at 25 °C). |+| 2 | IP+ | passive | Second primary current terminal for current flowing into the chip in the positive direction, sharing the IP+ function listed as pins 1-2. |+| 3 | IP- | passive | Primary current terminal where current flows out of the chip, defined as the negative direction; datasheet lists pins 3-4 together as IP-. |+| 4 | IP- | passive | Second primary current terminal for current flowing out of the chip in the negative direction, sharing the IP- function listed as pins 3-4. |+| 5 | GND | power_in | Power ground reference for the device (the datasheet calls it 电源地, power ground). |+| 6 | VREF/NC | power_in | On the R (ratiometric) version this pin is not connected because the internal amplifier output is disconnected, and it may also be tied to GND; it is VREF only on the F (fixed-output) version. |+| 7 | VOUT | output | Analog output voltage proportional to the primary current; on the 5 V version the output swings rail-to-rail from 0.1 VCC to VCC-0.1 V with 10 kΩ load and up to 10 nF load capacitance, and short-circuit current is 25 mA. |+| 8 | VCC | power_in | Supply input; the 5 V version operates from 4.5 V to 5.5 V (absolute maximum -0.3 V to 6.5 V) with about 15 mA typical current at no load. | ## Key specifications @@ -32,49 +32,44 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| VCC电压 | VCC | -0.3 | | 6.5 | V | 25℃ | 4 |-| Vout/Vref电压 | | -0.3 | | | V | 25℃ | 4 |-| 其他引脚电压 | | -0.3 | | | V | 25℃ | 4 |-| 储存温度 | TStorage | -40 | | 150 | ℃ | | 4 |-| 工作温度 | Toperation | -40 | | 125 | ℃ | | 4 |-| 结温 | Tj | -40 | | 150 | ℃ | | 4 |-| ESD HBM | VHBM | -8 | | 8 | kV | | 4 |-| ESD CDM | VCDM | -2 | | 2 | kV | | 4 |-| Latch-up | | -500 | | 500 | mA | | 4 |-| 冲击电压(Dielectric Surge Voltage) | Vsurge | | | 6 | kV | 根据IEC61000-4-5 1.2us/50us波形 | 4 |-| 隔离耐压 | VISO | | | 3000 | Vrms | 60s隔离耐压参数,根据UL62368-1 | 4 |-| 基本绝缘工作电压(Working Voltage for Basic Isolation) | VWVBI | | | 424 | Vrms | 根据UL60950-1以及UL62368-1 | 4 |-| 基本绝缘工作电压(Working Voltage for Basic Isolation) | VWVBI | | | 600 | Vdc | 根据UL60950-1以及UL62368-1 | 4 |-| 共模瞬态抑制 | CMTI | 100 | | | V/ns | 判断失效标准为输出尖峰大于100mV,并且持续时间长于1us | 4 |-| 爬电距离 | | 4 | | | mm | 最小爬电间隙 | 4 |-| 电气距离 | | 4 | | | mm | 最小空气间隙 | 4 |-| 漏电起痕指数 | CTI | 600 | | | | CTI I | 4 |-| 工作电压(5V供电版本) | VCC | 4.5 | 5 | 5.5 | V | 5V供电版本 | 5 |-| 工作电流(5V) | ICC | | 12 | 15 | mA | 没有负载,Vcc=5V | 5 |-| 输出轨到轨电压 | Vs | 0.1 | | | V | TA = 25℃, CL=1nF, RL=10K to VCC or GND | 5 |-| 共模磁场抑制比 | CMFR | 40 | | | dB | | 5 |-| 非线性度 | ENL | -0.2 | | 0.2 | % | | 5 |-| 电流感测量程 | Ipr | -20 | | 20 | A | | 8 |-| 灵敏度误差 | Esens | -1.5 | | 1.5 | % | TA = 25℃~125℃ | 8 |-| 零点误差 | VOE | -10 | | 10 | mV | TA = 25℃~125℃ | 8 |-| 总输出误差 | | -1.5 | | 1.5 | % | TA = 25℃~125℃ | 8 |-| 灵敏度Lifetime漂移 | Esens_drift | -2.3 | | 2.3 | % | 经过可靠性以后,TA = 25℃测试 | 8 |-| 零点Lifetime漂移 | VOE_drift | -12 | | 12 | mV | 经过可靠性以后,TA = 25℃测试 | 8 |-| 总误差Lifetime漂移 | Etotal_drift | -2.8 | | 2.8 | % | 经过可靠性以后,TA = 25℃测试 | 8 |-| 输出短路电流 | Ishort | | 25 | | mA | Vout短路到VCC和短路到GND, TA = 25℃ | 5 |-| 原边导通电阻 | RP | | 1.2 | | mΩ | TA = 25℃ | 5 |-| 内部滤波电阻 | Rfilter | | 4.7 | | kΩ | | 5 |-| 上电启动时间 | Tpo | | 1 | | ms | 推荐客户要在VCC达到VCCmin 1ms以后读取数据,POR之后1ms内部寄存器loading | 5 |-| 输出负载电容 | CL | | 10 | | nF | | 5 |-| 输出负载电阻 | RL | | 10 | | kΩ | | 5 |-| 输出上升时间 | Tr | | 0.9 | | us | Vout=2.2V, TA = 25℃, CL=1nF, 在3.3V,30AB量程测量,R版本 | 5 |-| 输出延迟时间 | Tpd | | 0.9 | | us | Vout=2.2V, TA = 25℃, CL=1nF, 在3.3V,30AB量程测量,R版本 | 5 |-| 输出响应时间 | Tresponse | | 1.5 | | us | Vout=1V, TA = 25℃, CL=1nF, 在3.3V,30AB量程测量,R版本 | 5 |-| 带宽 | BW | | 400 | | kHz | -3dB, CL=1nF, TA = 25℃, 在3.3V,30AB量程测量,R版本 | 5 |-| 噪声密度 | ND | | 120 | | uArms/√Hz | TA = 25℃, CL=1nF, VCC= 5V | 5 |-| 比例输出灵敏度误差 | SERR | | 0.75 | | % | R 版本,VCC= 4.85V~5.15V,TA = 25℃ | 6 |-| 比例输出零点相对误差 | VOUT0R | | 0.1 | | % | R 版本,VCC= 4.85V~5.15V,TA = 25℃ | 6 |-| 灵敏度 | Sens | | 100 | | mV/A | Iprmin<Ipr<Iprmax | 8 |+| Supply voltage (5V version) | VCC | 4.5 | 5 | 5.5 | V | 5V supply version | 5 |+| Operating current (no load) | ICC | | 12 | 15 | mA | No load, Vcc=5V | 5 |+| Primary conductor on-resistance | RP | | 1.2 | | mΩ | TA = 25℃ | 5 |+| Internal filter resistance | Rfilter | | 4.7 | | kΩ | | 5 |+| Power-on start time | Tpo | | 1 | | ms | Read data no earlier than 1ms after VCC reaches VCCmin | 5 |+| Output load capacitance | CL | | 10 | | nF | | 5 |+| Output load resistance | RL | | 10 | | kΩ | | 5 |+| Output short-circuit current | Ishort | | 25 | | mA | Vout shorted to VCC and shorted to GND, TA = 25℃ | 5 |+| Common-mode field rejection ratio | CMFR | 40 | | | dB | Printed as >40 | 5 |+| Output rise time | Tr | | 0.9 | | us | Vout=2.2V, TA = 25℃, CL=1nF, 在3.3V,30AB量程测量,R版本 | 5 |+| Output delay time | Tpd | | 0.9 | | us | Vout=2.2V, TA = 25℃, CL=1nF, 在3.3V,30AB量程测量,R版本 | 5 |+| Output response time | Tresponse | | 1.5 | | us | Vout=1V, TA = 25℃, CL=1nF, 在3.3V,30AB量程测量,R版本 | 5 |+| Bandwidth (-3dB) | BW | | 400 | | kHz | -3dB, CL=1nF, TA = 25℃, 在3.3V,30AB量程测量,R版本 | 5 |+| Noise density | ND | | 120 | | uArms/√Hz | TA = 25℃, CL=1nF, VCC= 5V | 5 |+| Nonlinearity | ENL | -0.2 | | 0.2 | % | Printed as ±0.2% | 5 |+| Ratiometric sensitivity error | SERR | | 0.75 | | % | R版本,VCC= 4.85V~5.15V,TA = 25℃ | 6 |+| Ratiometric zero-point relative error | VOUT0R | | 0.1 | | % | R版本,VCC= 4.85V~5.15V,TA = 25℃ | 6 |+| Current measurement range | Ipr | -20 | | 20 | A | | 8 |+| Sensitivity | Sens | | 100 | | mV/A | Iprmin<Ipr<Iprmax | 8 |+| Sensitivity error | Esens | -1.5 | | 1.5 | % | TA = 25℃~125℃ | 8 |+| Zero-point error | VOE | -10 | | 10 | mV | TA = 25℃~125℃ | 8 |+| Total output error | Etotal | -1.5 | | 1.5 | % | TA = 25℃~125℃ | 8 |+| Sensitivity lifetime drift | Esens_drift | -2.3 | | 2.3 | % | 经过可靠性以后,TA = 25℃测试 | 8 |+| Zero-point lifetime drift | VOE_drift | -12 | | 12 | mV | 经过可靠性以后,TA = 25℃测试 | 8 |+| Total error lifetime drift | Etotal_drift | -2.8 | | 2.8 | % | 经过可靠性以后,TA = 25℃测试 | 8 |+| Supply voltage | VCC | -0.3 | | 6.5 | V | 25℃ | 4 |+| Storage temperature | TStorage | -40 | | 150 | ℃ | | 4 |+| Operating temperature | Toperation | -40 | | 125 | ℃ | | 4 |+| Operating temperature | TA | -40 | | 125 | ℃ | VCC = 5V or 3.3V, unless otherwise specified | 5 |+| Junction temperature | Tj | -40 | | 150 | ℃ | | 4 |+| ESD human body model | VHBM | -8 | | 8 | kV | Printed as ±8 kV | 4 |+| ESD charged device model | VCDM | -2 | | 2 | kV | Printed as ±2 kV | 4 |+| Latch-up | | -500 | | 500 | mA | Printed as ±500 mA | 4 |+| Dielectric surge voltage | Vsurge | | | 6 | kV | IEC61000-4-5 1.2us/50us waveform | 4 |+| Isolation withstand voltage | VISO | | | 3000 | Vrms | 60s, per UL62368-1 | 4 |+| Common-mode transient immunity | CMTI | 100 | | | V/ns | Printed as >100 V/ns; failure: output spike >100mV lasting >1us | 4 |+| Creepage distance | Creepage | 4 | | | mm | Minimum creepage | 4 |+| Clearance distance | Clearance | 4 | | | mm | Minimum clearance | 4 | ## CAD (KiCad official) @@ -87,7 +82,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [NOVOSENSE(纳芯微) datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589785261623447552) (21 pp, sha256 `4d67156ecd2b3706`, retrieved 2026-11-08, tier: lcsc)+- **Datasheet:** [NOVOSENSE(纳芯微) datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589785261623447552) (21 pp, sha256 `4d67156ecd2b3706`, retrieved 2026-11-09, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original. - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
nsm2012-20b5r-dspr-hero.glb⋯ 1 unchanged line ⋯
nsm2012-20b5r-dspr-hero.overlay.json+2−2@@ -74,7 +74,7 @@ "footprint": "nsm2012-20b5r-dspr.kicad_mod", "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f", "pins": "page.json component.pins",- "pins_sha256": "cffc8e60166ae7eb74424a5ad22aa39d1bdafd2efc9ca6361b6697a4123764ac"+ "pins_sha256": "5d744fd7cac8820b89eb6822f92db599cd7884441a5ddea1a063f3ef51001cce" }, "generator": "adom-wiki 1.8.14 (component_hero)", "labels": [@@ -134,7 +134,7 @@ }, { "pad": "7",- "text": "Vout",+ "text": "VOUT", "x": 3.6, "y": -0.635, "align": "left",
nsm2012-20b5r-dspr.kicad_sym+1−1@@ -29,7 +29,7 @@ (number "8" (effects (font (size 1.27 1.27)))) ) (pin output line (at 17.78 0.00 180) (length 5.08)- (name "Vout" (effects (font (size 1.27 1.27))))+ (name "VOUT" (effects (font (size 1.27 1.27)))) (number "7" (effects (font (size 1.27 1.27)))) ) (pin power_in line (at 17.78 -2.54 180) (length 5.08)
nsm2012-20b5r-dspr.lbr+15−5@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>NOVOSENSE(纳芯微) Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-8_3.9x4.9mm_P1.27mm"> <description>SOIC-8, 3.9 x 4.9 mm, 1.27 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="NSM2012-20B5R-DSPR">+ <description>NOVOSENSE(纳芯微) Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet</description> <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/> <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -97,14 +98,14 @@ <pin name="IP-" x="-17.78" y="-2.54" length="middle" direction="pas"/> <pin name="IP-@2" x="-17.78" y="-5.08" length="middle" direction="pas"/> <pin name="VCC" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>- <pin name="Vout" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+ <pin name="VOUT" x="17.78" y="0" length="middle" direction="out" rot="R180"/> <pin name="VREF/NC" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/> <pin name="GND" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="NSM2012-20B5R-DSPR" prefix="U">- <description></description>+ <description>NOVOSENSE(纳芯微) Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet</description> <gates> <gate name="G$1" symbol="NSM2012-20B5R-DSPR" x="0" y="0"/> </gates>@@ -116,11 +117,20 @@ <connect gate="G$1" pin="IP-" pad="3"/> <connect gate="G$1" pin="IP-@2" pad="4"/> <connect gate="G$1" pin="VCC" pad="8"/>- <connect gate="G$1" pin="Vout" pad="7"/>+ <connect gate="G$1" pin="VOUT" pad="7"/> <connect gate="G$1" pin="VREF/NC" pad="6"/> <connect gate="G$1" pin="GND" pad="5"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="NSM2012-20B5R-DSPR" constant="no"/>+ <attribute name="MANUFACTURER" value="NOVOSENSE(纳芯微)" constant="no"/>+ <attribute name="DATASHEET" value="https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589785261623447552" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/nsm2012-20b5r-dspr" constant="no"/>+ <attribute name="DIGIKEY_PN" value="5380-NSM2012-20B5R-DSPRTR-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C5137006" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
package.json+18−19@@ -1,6 +1,6 @@ { "slug": "nsm2012-20b5r-dspr",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "NOVOSENSE(纳芯微) Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,12 +53,11 @@ "digikey": "5380-NSM2012-20B5R-DSPRTR-ND" }, "distributor_check": {- "checked_at": "2026-11-08T04:24:05Z",+ "checked_at": "2026-11-09T22:03:03Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "5380-NSM2012-20B5R-DSPRTR-ND",- "status": "found",- "lifecycle": "Active"+ "status": "found" }, "mouser": { "pn": null,@@ -70,49 +69,49 @@ "number": "1", "name": "IP+", "type": "passive",- "description": "Primary conductor terminal where current flows into the chip in the positive direction; pins 1 and 2 are the same IP+ terminal."+ "description": "Primary current terminal where current flows into the chip, defined as the positive direction; datasheet lists pins 1-2 together as IP+ (rated for 5 V version, primary on-resistance 1.2 mΩ typ at 25 °C)." }, { "number": "2", "name": "IP+", "type": "passive",- "description": "Primary conductor terminal where current flows into the chip in the positive direction; pins 1 and 2 are the same IP+ terminal."+ "description": "Second primary current terminal for current flowing into the chip in the positive direction, sharing the IP+ function listed as pins 1-2." }, { "number": "3", "name": "IP-", "type": "passive",- "description": "Primary conductor terminal where current flows out of the chip in the negative direction; pins 3 and 4 are the same IP- terminal."+ "description": "Primary current terminal where current flows out of the chip, defined as the negative direction; datasheet lists pins 3-4 together as IP-." }, { "number": "4", "name": "IP-", "type": "passive",- "description": "Primary conductor terminal where current flows out of the chip in the negative direction; pins 3 and 4 are the same IP- terminal."+ "description": "Second primary current terminal for current flowing out of the chip in the negative direction, sharing the IP- function listed as pins 3-4." }, { "number": "5", "name": "GND", "type": "power_in",- "description": "Power supply ground (电源地) for the device."+ "description": "Power ground reference for the device (the datasheet calls it 电源地, power ground)." }, { "number": "6", "name": "VREF/NC", "type": "power_in",- "description": "Not connected on the R (ratiometric) version, where the internal amplifier output is disconnected and the customer may optionally tie it to ground; it is VREF only on the F (fixed-output) version."+ "description": "On the R (ratiometric) version this pin is not connected because the internal amplifier output is disconnected, and it may also be tied to GND; it is VREF only on the F (fixed-output) version." }, { "number": "7",- "name": "Vout",+ "name": "VOUT", "type": "output",- "description": "Analog output voltage proportional to the primary current on the R version, with a zero-current level of VCC/2 for the bidirectional type."+ "description": "Analog output voltage proportional to the primary current; on the 5 V version the output swings rail-to-rail from 0.1 VCC to VCC-0.1 V with 10 kΩ load and up to 10 nF load capacitance, and short-circuit current is 25 mA." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Supply input; 4.5 V to 5.5 V for the 5 V version (the part number suffix 5B5R indicates a 5 V supply, per the Order Information table)."+ "description": "Supply input; the 5 V version operates from 4.5 V to 5.5 V (absolute maximum -0.3 V to 6.5 V) with about 15 mA typical current at no load." } ], "provenance": {@@ -126,11 +125,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pinout is for the package variant this MPN is sold in: NSM2012-20B5R-DSPR is a 5 V, R (ratiometric) "+ "extractor flagged: Pin 6 is named VREF/NC in the datasheet. The MPN NSM2012-20B5R-DSPR is the R (ratiometric) variant, ; The datasheet groups IP+ as pins 1-2 and IP- as pins 3-4 in Table 1.1 and does not give a per-pin el; The source text is Chinese. Descriptions are translated into English. Electrical values are taken fr" ], "pages_sent": 21,- "cost_usd": 0.1023,- "at": "2026-11-08T04:23:52"+ "cost_usd": 0.1011,+ "at": "2026-11-09T22:02:37" }, "datasheet": { "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589785261623447552",@@ -167,7 +166,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",- "checked": "2026-11-08",+ "checked": "2026-11-09", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -185,8 +184,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "95f851def8ae8c465d9c84cbd421c07c6bdf46a6ceddbacd3d56ddb08a8b3c74",- "checked": "2026-11-08",+ "sha256": "5a4e78fbb354ab3dc68483f6f7ee7b124f03a577b66c3fa072235365f1534190",+ "checked": "2026-11-09", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]
page.json+21−22@@ -4,7 +4,7 @@ "slug": "nsm2012-20b5r-dspr", "title": "NSM2012-20B5R-DSPR", "brief": "NOVOSENSE(纳芯微) Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -35,12 +35,11 @@ "digikey": "5380-NSM2012-20B5R-DSPRTR-ND" }, "distributor_check": {- "checked_at": "2026-11-08T04:24:05Z",+ "checked_at": "2026-11-09T22:03:03Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "5380-NSM2012-20B5R-DSPRTR-ND",- "status": "found",- "lifecycle": "Active"+ "status": "found" }, "mouser": { "pn": null,@@ -52,49 +51,49 @@ "number": "1", "name": "IP+", "type": "passive",- "description": "Primary conductor terminal where current flows into the chip in the positive direction; pins 1 and 2 are the same IP+ terminal."+ "description": "Primary current terminal where current flows into the chip, defined as the positive direction; datasheet lists pins 1-2 together as IP+ (rated for 5 V version, primary on-resistance 1.2 mΩ typ at 25 °C)." }, { "number": "2", "name": "IP+", "type": "passive",- "description": "Primary conductor terminal where current flows into the chip in the positive direction; pins 1 and 2 are the same IP+ terminal."+ "description": "Second primary current terminal for current flowing into the chip in the positive direction, sharing the IP+ function listed as pins 1-2." }, { "number": "3", "name": "IP-", "type": "passive",- "description": "Primary conductor terminal where current flows out of the chip in the negative direction; pins 3 and 4 are the same IP- terminal."+ "description": "Primary current terminal where current flows out of the chip, defined as the negative direction; datasheet lists pins 3-4 together as IP-." }, { "number": "4", "name": "IP-", "type": "passive",- "description": "Primary conductor terminal where current flows out of the chip in the negative direction; pins 3 and 4 are the same IP- terminal."+ "description": "Second primary current terminal for current flowing out of the chip in the negative direction, sharing the IP- function listed as pins 3-4." }, { "number": "5", "name": "GND", "type": "power_in",- "description": "Power supply ground (电源地) for the device."+ "description": "Power ground reference for the device (the datasheet calls it 电源地, power ground)." }, { "number": "6", "name": "VREF/NC", "type": "power_in",- "description": "Not connected on the R (ratiometric) version, where the internal amplifier output is disconnected and the customer may optionally tie it to ground; it is VREF only on the F (fixed-output) version."+ "description": "On the R (ratiometric) version this pin is not connected because the internal amplifier output is disconnected, and it may also be tied to GND; it is VREF only on the F (fixed-output) version." }, { "number": "7",- "name": "Vout",+ "name": "VOUT", "type": "output",- "description": "Analog output voltage proportional to the primary current on the R version, with a zero-current level of VCC/2 for the bidirectional type."+ "description": "Analog output voltage proportional to the primary current; on the 5 V version the output swings rail-to-rail from 0.1 VCC to VCC-0.1 V with 10 kΩ load and up to 10 nF load capacitance, and short-circuit current is 25 mA." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Supply input; 4.5 V to 5.5 V for the 5 V version (the part number suffix 5B5R indicates a 5 V supply, per the Order Information table)."+ "description": "Supply input; the 5 V version operates from 4.5 V to 5.5 V (absolute maximum -0.3 V to 6.5 V) with about 15 mA typical current at no load." } ], "provenance": {@@ -108,11 +107,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pinout is for the package variant this MPN is sold in: NSM2012-20B5R-DSPR is a 5 V, R (ratiometric) "+ "extractor flagged: Pin 6 is named VREF/NC in the datasheet. The MPN NSM2012-20B5R-DSPR is the R (ratiometric) variant, ; The datasheet groups IP+ as pins 1-2 and IP- as pins 3-4 in Table 1.1 and does not give a per-pin el; The source text is Chinese. Descriptions are translated into English. Electrical values are taken fr" ], "pages_sent": 21,- "cost_usd": 0.1023,- "at": "2026-11-08T04:23:52"+ "cost_usd": 0.1011,+ "at": "2026-11-09T22:02:37" }, "datasheet": { "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589785261623447552",@@ -149,7 +148,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",- "checked": "2026-11-08",+ "checked": "2026-11-09", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -167,8 +166,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "95f851def8ae8c465d9c84cbd421c07c6bdf46a6ceddbacd3d56ddb08a8b3c74",- "checked": "2026-11-08",+ "sha256": "5a4e78fbb354ab3dc68483f6f7ee7b124f03a577b66c3fa072235365f1534190",+ "checked": "2026-11-09", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]@@ -741,7 +740,7 @@ "nsm2012-20b5r-dspr-hero.overlay.json", "nsm2012-20b5r-dspr-etched.glb" ],- "visibility": {- "public": true- }+ "visibility": "private",+ "description": "NOVOSENSE(纳芯微) Current Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }