component

NSI8210N0-DSPR

Public Made by Adom

by adom

Novosense Digital Isolators, SOP-8-150mil. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentisolatorsnsi8210n0-dsprboard-derived

Verified NSI8210N0-DSPR

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against NOVOSENSE's NSI8210 datasheet (EN) 2.0, 2025/11/25files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: replaced the LCSC copy (Datasheet (EN) 1.2, 2022) with NOVOSENSE's current edition, Datasheet (EN) 2.0 dated 2025/11/25, downloaded from novosns.com (the file linked from the NSI8210N0-DSPR product page, which lists the part as Active)
  • ✓All 8 pins match Table 1.1 and Figure 1.1 (p.3) by number and name: 1 VDD1, 2 IN, 3 VDD1, 4 GND1, 5 GND2, 6 OUT, 7 NC, 8 VDD2. No renames needed
  • ✓Pin types set from Table 1.1 (all were 'unspecified'): VDD1/VDD2/GND1/GND2 power_in, IN input, OUT output, NC no_connect
  • ✓Descriptions rewritten from Table 1.1 (p.3), recommended operating conditions (p.4-5), electrical characteristics (p.5), Table 8.1 fail-safe output (p.19) and the PCB layout section (p.21); the earlier text's TTL input thresholds (VIH 2 V, VIL 0.8 V) and 5000 Vrms figure did not match this edition or this 3.75 kV part (p.5, p.25) and were removed
  • •Footprint vs Figure 10.2 SOP8 land pattern (p.23): 8 pads 1.55 x 0.60 mm, as drawn; pitch 1.27 mm; pad centres 5.35 mm apart vs the drawing's 5.4 mm (0.05 mm narrower), pads span x 1.90 to 3.45 mm from centre and cover the feet (lead tips at E/2 = 2.90-3.10 mm, L 0.40-1.00 mm); pad width 0.60 over b 0.33-0.49; no exposed pad; pin 1 top-left as Figure 1.1
  • •3D body (plain STEP) 6.00 x 5.05 x 1.75 mm against E 5.80-6.20, D 4.80-5.00, A 1.75 max (Figure 10.1, p.23): E and A in range; the model's 5.05 mm length is 0.05 mm over D max, which excludes mold flash and protrusions of up to 0.15 mm per side (envelope up to 5.30 mm). Leads 0.44 mm wide on 1.27 mm pitch; pin-1 dot top-left over pad 1; Z-up, seated on z = 0, centred on the pads
  • ✓DigiKey and Mouser do not list the part: searched NSI8210N0-DSPR (2026-10-08) and NSI8210 (2026-10-27); LCSC C2987924 kept
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (NOVOSENSE, EN 2.0)product page (NOVOSENSE)
Verified files✓ nsi8210n0-dspr.kicad_sym✓ nsi8210n0-dspr.kicad_mod✓ nsi8210n0-dspr.step
8 Oct 2026Claude (AI build)Source footprint is Package_SO:SSOP-8_3.9x5.05mm_P1.27mm while LCSC lists SOP-8-150mil; co...superseded
reviewfor all variants
  • •Source footprint is Package_SO:SSOP-8_3.9x5.05mm_P1.27mm while LCSC lists SOP-8-150mil; confirm the land pattern against the datasheet package drawing.
8 Oct 2026Claude (AI build)Source symbol carries leftover keywords/filters from another part (ki_keywords "MCP1725-AD...superseded
reviewfor all variants
  • •Source symbol carries leftover keywords/filters from another part (ki_keywords "MCP1725-ADJE/MC", DFN8 fp filters); cleaned on this page.
8 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓8 of 8 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! nsi8210n0-dspr.kicad_sym! nsi8210n0-dspr.kicad_mod✓ nsi8210n0-dspr.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

History of nsi8210n0-dspr-etched.glb

1 commit ← Back to file
Add component CAD, datasheet and docs (1)
Caleb · 5219ed9 · 20d ago