component

NSI8210N0-DSPR

Public Made by Adom

by adom

Novosense Digital Isolators, SOP-8-150mil. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentisolatorsnsi8210n0-dsprboard-derived

Verified NSI8210N0-DSPR

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against NOVOSENSE's NSI8210 datasheet (EN) 2.0, 2025/11/25files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: replaced the LCSC copy (Datasheet (EN) 1.2, 2022) with NOVOSENSE's current edition, Datasheet (EN) 2.0 dated 2025/11/25, downloaded from novosns.com (the file linked from the NSI8210N0-DSPR product page, which lists the part as Active)
  • ✓All 8 pins match Table 1.1 and Figure 1.1 (p.3) by number and name: 1 VDD1, 2 IN, 3 VDD1, 4 GND1, 5 GND2, 6 OUT, 7 NC, 8 VDD2. No renames needed
  • ✓Pin types set from Table 1.1 (all were 'unspecified'): VDD1/VDD2/GND1/GND2 power_in, IN input, OUT output, NC no_connect
  • ✓Descriptions rewritten from Table 1.1 (p.3), recommended operating conditions (p.4-5), electrical characteristics (p.5), Table 8.1 fail-safe output (p.19) and the PCB layout section (p.21); the earlier text's TTL input thresholds (VIH 2 V, VIL 0.8 V) and 5000 Vrms figure did not match this edition or this 3.75 kV part (p.5, p.25) and were removed
  • •Footprint vs Figure 10.2 SOP8 land pattern (p.23): 8 pads 1.55 x 0.60 mm, as drawn; pitch 1.27 mm; pad centres 5.35 mm apart vs the drawing's 5.4 mm (0.05 mm narrower), pads span x 1.90 to 3.45 mm from centre and cover the feet (lead tips at E/2 = 2.90-3.10 mm, L 0.40-1.00 mm); pad width 0.60 over b 0.33-0.49; no exposed pad; pin 1 top-left as Figure 1.1
  • •3D body (plain STEP) 6.00 x 5.05 x 1.75 mm against E 5.80-6.20, D 4.80-5.00, A 1.75 max (Figure 10.1, p.23): E and A in range; the model's 5.05 mm length is 0.05 mm over D max, which excludes mold flash and protrusions of up to 0.15 mm per side (envelope up to 5.30 mm). Leads 0.44 mm wide on 1.27 mm pitch; pin-1 dot top-left over pad 1; Z-up, seated on z = 0, centred on the pads
  • ✓DigiKey and Mouser do not list the part: searched NSI8210N0-DSPR (2026-10-08) and NSI8210 (2026-10-27); LCSC C2987924 kept
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (NOVOSENSE, EN 2.0)product page (NOVOSENSE)
Verified files✓ nsi8210n0-dspr.kicad_sym✓ nsi8210n0-dspr.kicad_mod✓ nsi8210n0-dspr.step
8 Oct 2026Claude (AI build)Source footprint is Package_SO:SSOP-8_3.9x5.05mm_P1.27mm while LCSC lists SOP-8-150mil; co...superseded
reviewfor all variants
  • •Source footprint is Package_SO:SSOP-8_3.9x5.05mm_P1.27mm while LCSC lists SOP-8-150mil; confirm the land pattern against the datasheet package drawing.
8 Oct 2026Claude (AI build)Source symbol carries leftover keywords/filters from another part (ki_keywords "MCP1725-AD...superseded
reviewfor all variants
  • •Source symbol carries leftover keywords/filters from another part (ki_keywords "MCP1725-ADJE/MC", DFN8 fp filters); cleaned on this page.
8 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓8 of 8 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! nsi8210n0-dspr.kicad_sym! nsi8210n0-dspr.kicad_mod✓ nsi8210n0-dspr.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Add component metadata and pin table

Caleb ·da7beaa507 ·20d ago ·parent 7aa969e
1 file changed +173−30
page.json+173−30
page.json+173−30
@@ -1,28 +1,35 @@ {   "schema_version": 1,-  "slug": "nsi8210n0-dspr",   "type": "component",-  "kind": "component",+  "slug": "nsi8210n0-dspr",   "title": "NSI8210N0-DSPR",   "brief": "Novosense Digital Isolators, SOP-8-150mil. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.",   "version": "0.1.0",-  "because": "No wiki page exists for this MPN: cross-referenced every BOM line of the Adom board pages against all 25,496 hardware pages on 2026-10-07; this part had no match by MPN or LCSC number.",-  "hero": {-    "type": "billboard",-    "headline": "NSI8210N0-DSPR",-    "subhead": "Novosense Digital Isolators",-    "screenshot": "docs/hero.png",-    "chrome": false-  },+  "license": "CC-BY-SA-4.0",+  "tags": [+    "component",+    "isolators",+    "nsi8210n0-dspr",+    "board-derived",+    "staged-for-validation"+  ],   "component": {     "mpn": "NSI8210N0-DSPR",     "manufacturer": "Novosense",     "package": "SOP-8-150mil",-    "pin_count": null,+    "pin_count": 8,     "category": "Isolators",     "subcategory": "Digital Isolators",-    "body_size": null,-    "parts": {},+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905284490063872",+    "parts": {+      "symbol": "nsi8210n0-dspr.kicad_sym",+      "footprint": "nsi8210n0-dspr.kicad_mod",+      "model_3d": "nsi8210n0-dspr-etched.glb",+      "model_3d_plain": "nsi8210n0-dspr.glb",+      "model_3d_step": "nsi8210n0-dspr-etched.step",+      "model_3d_step_plain": "nsi8210n0-dspr.step",+      "lbr": "nsi8210n0-dspr.lbr"+    },     "distributor_links": {       "digikey": false,       "digikey_note": "2026-10-08: no exact-MPN listing for NSI8210N0-DSPR found via the digikey API.",@@ -33,31 +40,167 @@         "url": "https://www.lcsc.com/product-detail/C2987924.html"       }     },-    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905284490063872"+    "pins": [+      {+        "number": "1",+        "name": "VDD1",+        "type": "unspecified",+        "description": "Power supply for isolator side 1 (input side). Operating range 2.5 V to 5.5 V, absolute max 6.5 V. Must be tied to pin 3 (both VDD1 pins must be connected together). [datasheet p.3]"+      },+      {+        "number": "2",+        "name": "IN",+        "type": "unspecified",+        "description": "Logic input (side 1). CMOS-level digital input referenced to GND1. VIH ≥ 2 V, VIL ≤ 0.8 V, input threshold ~1.6 V with 0.4 V hysteresis. Internal pull resistor (~8–15 µA, polarity selected by option code; N0 pulls low → default-low output). [datasheet p.3]"+      },+      {+        "number": "3",+        "name": "VDD1",+        "type": "unspecified",+        "description": "Power supply for isolator side 1 (input side). Operating range 2.5 V to 5.5 V, absolute max 6.5 V. Must be tied to pin 3 (both VDD1 pins must be connected together). [datasheet p.3]"+      },+      {+        "number": "4",+        "name": "GND1",+        "type": "unspecified",+        "description": "Ground reference for isolator side 1 (input side). Galvanically isolated from GND2 by the on-die isolation barrier (up to 5000 Vrms per UL1577). [datasheet p.3]"+      },+      {+        "number": "5",+        "name": "GND2",+        "type": "unspecified",+        "description": "Ground reference for isolator side 2 (output side). Galvanically isolated from GND1. [datasheet p.3]"+      },+      {+        "number": "6",+        "name": "OUT",+        "type": "unspecified",+        "description": "Logic output (side 2) referenced to GND2. CMOS push-pull: VOH ≥ VDD2 − 0.4 V at IOH = 4 mA; VOL ≤ 0.4 V at IOL = 4 mA. Output impedance ~50 Ω. [datasheet p.3]"+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unspecified",+        "description": "No internal connection. May be left floating or tied to a nearby plane for mechanical/thermal reasons. [datasheet p.3]"+      },+      {+        "number": "8",+        "name": "VDD2",+        "type": "unspecified",+        "description": "Power supply for isolator side 2 (output side). Operating range 2.5 V to 5.5 V, absolute max 6.5 V. Decouple to GND2 close to the pin. [datasheet p.3]"+      }+    ],+    "provenance": {+      "factory_chain": {+        "pipeline": "adom-parts (board-derived) 0.1",+        "pins": "KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7)",+        "at": "2026-10-08"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905284490063872",+        "pages": 32,+        "sha256": "5e9c56a292e239a6baaef5e7c502b94c3b7dd17c9f5f922333fe9929ab25a53f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official libraries (CC-BY-SA 4.0); footprint and symbol as used on Adom boards",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "nsi8210n0-dspr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin",+        "seat": "z = 0 (PCB top surface)",+        "extents_mm": [+          6.0,+          5.05,+          1.75+        ],+        "zmin_mm": -0.0,+        "footprint_binding": "identity",+        "sha256": "05ea67aabcf66c324e1029149c5de1ea56efca7838b9c7ed0f0f9982f4625abf",+        "checked": "2026-10-08",+        "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+      },+      {+        "file": "nsi8210n0-dspr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin",+        "seat": "z = 0 (PCB top surface)",+        "extents_mm": [+          6.0,+          5.05,+          1.752+        ],+        "zmin_mm": -0.0,+        "footprint_binding": "identity",+        "sha256": "fd95252b1f5b60cc1e4994087a607ba8cd470355aa77e7928b6078a9c7b502ff",+        "checked": "2026-10-08",+        "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+      }+    ]   },-  "tags": [-    "component",-    "isolators",-    "nsi8210n0-dspr",-    "board-derived",-    "staged-for-validation"+  "metadata": {+    "specs": {+      "Manufacturer": "Novosense",+      "Package": "SOP-8-150mil",+      "Category": "Isolators",+      "Pins": "8",+      "LCSC": "C2987924"+    }+  },+  "variants": [],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"   ],   "discovery_triggers": [     "nsi8210n0-dspr",     "nsi8210n0-dspr"   ],-  "license": "CC-BY-SA-4.0",-  "visibility": {-    "public": false-  },+  "discovery_pitch": "NSI8210N0-DSPR (Novosense) component page: pinout, KiCad symbol, footprint and 3D.",   "author": {     "name": "Caleb",     "email": "[email protected]"   },-  "sample_prompts": [],-  "discovery_pitch": null,-  "metadata": {},-  "created_at": "2026-10-08T18:30:57.343Z",-  "updated_at": "2026-10-08T18:30:57.343Z",-  "org": "adom"+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "verification.json",+    "nsi8210n0-dspr.kicad_sym",+    "nsi8210n0-dspr.kicad_mod",+    "nsi8210n0-dspr-etched.glb",+    "nsi8210n0-dspr-etched.step",+    "nsi8210n0-dspr.glb",+    "nsi8210n0-dspr.step",+    "nsi8210n0-dspr.lbr",+    "docs/hero.png",+    "docs/nsi8210n0-dspr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": {+    "public": false+  } }\ No newline at end of file