← Commit history

Initial commit: component/nrf24l01p-r

Ray ·0934a6f2f9 ·
2 files changed +278
README.mdadded+57
@@ -0,0 +1,57 @@+# NRF24L01P-R++**Nordic Semicon** · RF Transceiver ICs · QFN-20-EP(4x4)++NRF24L01P-R from Nordic Semicon, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CE | input | Chip enable; high activates RX or TX mode (5V tolerant). |+| 2 | CSN | input | SPI chip select input; active low (5V tolerant). |+| 3 | SCK | input | SPI clock input; 0 to 10 Mbps maximum frequency (5V tolerant). |+| 4 | MOSI | input | SPI slave serial data input (5V tolerant). |+| 5 | MISO | tri_state | SPI slave serial data output; tri-state capable, 0 to 10 Mbps. |+| 6 | IRQ | output | Maskable active-low interrupt output; asserted by RX_DR, TX_DS, or MAX_RT events. |+| 7 | VDD | power_in | Power supply input; +1.9 to +3.6 V DC supply range. |+| 8 | VSS | power_in | Ground; 0 V return. |+| 9 | XC2 | output | Crystal oscillator output pin 2; connects to crystal load capacitor. |+| 10 | XC1 | input | Crystal oscillator input pin 1; 16 MHz ±60 ppm crystal reference. |+| 11 | VDD_PA | power_out | Power amplifier regulated supply output; +1.8 V for internal PA. |+| 12 | ANT1 | bidirectional | Balanced RF antenna interface 1 for 2.4 GHz transceiver; typical load impedance 15Ω+j88Ω. |+| 13 | ANT2 | bidirectional | Balanced RF antenna interface 2 for 2.4 GHz transceiver; typical load impedance 15Ω+j88Ω. |+| 14 | VSS | power_in | Ground; 0 V return. |+| 15 | VDD | power_in | Power supply input; +1.9 to +3.6 V DC supply range. |+| 16 | IREF | input | Reference current input; connect 22 kΩ resistor to ground. |+| 17 | VSS | power_in | Ground; 0 V return. |+| 18 | VDD | power_in | Power supply input; +1.9 to +3.6 V DC supply range. |+| 19 | DVDD | power_out | Digital supply output for decoupling; internally regulated voltage. |+| 20 | VSS | power_in | Ground; 0 V return. |+| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Nordic Semicon |+| Package | QFN-20-EP(4x4) |+| Category | RF And Wireless |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `NRF24L01P-R`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm`+- 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `nrf24l01p-r-etched.step` / `nrf24l01p-r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nrf24l01p-r.step` / `nrf24l01p-r.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Nordic Semicon datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579709338178813952) (78 pp, sha256 `224423c7596da987`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/nrf24l01p-r-datasheet.pdf)
page.jsonadded+221
@@ -0,0 +1,221 @@+{+  "slug": "nrf24l01p-r",+  "version": "0.1.0",+  "type": "component",+  "description": "Nordic Semicon RF Transceiver ICs, QFN-20-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "rf and wireless",+    "nrf24l01p-r",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "nrf24l01p-r.kicad_sym",+    "nrf24l01p-r.kicad_mod",+    "nrf24l01p-r.glb",+    "nrf24l01p-r.step",+    "nrf24l01p-r.lbr",+    "docs/hero.png",+    "docs/nrf24l01p-r-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "NRF24L01P-R",+    "manufacturer": "Nordic Semicon",+    "package": "QFN-20-EP(4x4)",+    "pin_count": 21,+    "category": "RF And Wireless",+    "subcategory": "RF Transceiver ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579709338178813952",+    "parts": {+      "symbol": "nrf24l01p-r.kicad_sym",+      "footprint": "nrf24l01p-r.kicad_mod",+      "model_3d": "nrf24l01p-r-etched.glb",+      "model_3d_plain": "nrf24l01p-r.glb",+      "model_3d_step": "nrf24l01p-r-etched.step",+      "model_3d_step_plain": "nrf24l01p-r.step",+      "lbr": "nrf24l01p-r.lbr"+    },+    "distributor_links": {+      "lcsc": "C8791"+    },+    "pins": [+      {+        "number": "1",+        "name": "CE",+        "type": "input",+        "description": "Chip enable; high activates RX or TX mode (5V tolerant)."+      },+      {+        "number": "2",+        "name": "CSN",+        "type": "input",+        "description": "SPI chip select input; active low (5V tolerant)."+      },+      {+        "number": "3",+        "name": "SCK",+        "type": "input",+        "description": "SPI clock input; 0 to 10 Mbps maximum frequency (5V tolerant)."+      },+      {+        "number": "4",+        "name": "MOSI",+        "type": "input",+        "description": "SPI slave serial data input (5V tolerant)."+      },+      {+        "number": "5",+        "name": "MISO",+        "type": "tri_state",+        "description": "SPI slave serial data output; tri-state capable, 0 to 10 Mbps."+      },+      {+        "number": "6",+        "name": "IRQ",+        "type": "output",+        "description": "Maskable active-low interrupt output; asserted by RX_DR, TX_DS, or MAX_RT events."+      },+      {+        "number": "7",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input; +1.9 to +3.6 V DC supply range."+      },+      {+        "number": "8",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground; 0 V return."+      },+      {+        "number": "9",+        "name": "XC2",+        "type": "output",+        "description": "Crystal oscillator output pin 2; connects to crystal load capacitor."+      },+      {+        "number": "10",+        "name": "XC1",+        "type": "input",+        "description": "Crystal oscillator input pin 1; 16 MHz ±60 ppm crystal reference."+      },+      {+        "number": "11",+        "name": "VDD_PA",+        "type": "power_out",+        "description": "Power amplifier regulated supply output; +1.8 V for internal PA."+      },+      {+        "number": "12",+        "name": "ANT1",+        "type": "bidirectional",+        "description": "Balanced RF antenna interface 1 for 2.4 GHz transceiver; typical load impedance 15Ω+j88Ω."+      },+      {+        "number": "13",+        "name": "ANT2",+        "type": "bidirectional",+        "description": "Balanced RF antenna interface 2 for 2.4 GHz transceiver; typical load impedance 15Ω+j88Ω."+      },+      {+        "number": "14",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground; 0 V return."+      },+      {+        "number": "15",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input; +1.9 to +3.6 V DC supply range."+      },+      {+        "number": "16",+        "name": "IREF",+        "type": "input",+        "description": "Reference current input; connect 22 kΩ resistor to ground."+      },+      {+        "number": "17",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground; 0 V return."+      },+      {+        "number": "18",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input; +1.9 to +3.6 V DC supply range."+      },+      {+        "number": "19",+        "name": "DVDD",+        "type": "power_out",+        "description": "Digital supply output for decoupling; internally regulated voltage."+      },+      {+        "number": "20",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground; 0 V return."+      },+      {+        "number": "21",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 21 added from the footprint"+        ],+        "pages_sent": 78,+        "cost_usd": 0.4889,+        "at": "2026-09-18T05:25:23"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8579709338178813952",+        "pages": 78,+        "sha256": "224423c7596da987",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 21,+        "described": 21,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file