← Commit history
page.json+174−8@@ -1,13 +1,184 @@ {+ "schema_version": 1,+ "type": "component", "slug": "ne556drg",+ "title": "NE556DRG",+ "brief": "HANSCHIP semiconductor Timers / Clock Oscillators, SOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "HANSCHIP semiconductor Timers / Clock Oscillators, SOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "rtc", "ne556drg" ],+ "component": {+ "mpn": "NE556DRG",+ "manufacturer": "HANSCHIP semiconductor",+ "package": "SOP-14",+ "pin_count": 14,+ "category": "RTC",+ "subcategory": "Timers / Clock Oscillators",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2209290930_HANSCHIP-semiconductor-NE556DRG_C5145392.pdf",+ "parts": {+ "symbol": "ne556drg.kicad_sym",+ "footprint": "ne556drg.kicad_mod",+ "model_3d": "ne556drg.glb",+ "model_3d_step": "ne556drg.step",+ "lbr": "ne556drg.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "DIS1",+ "type": "output",+ "description": "Discharge pin for timer 1. Open-collector output that discharges the external timing capacitor when the internal flip-flop is set."+ },+ {+ "number": "2",+ "name": "THR1",+ "type": "input",+ "description": "Threshold input for timer 1. When voltage exceeds 2/3 VCC, the internal flip-flop resets and the output goes low."+ },+ {+ "number": "3",+ "name": "CV1",+ "type": "input",+ "description": "Control voltage input for timer 1. Allows external modulation of the internal 2/3 VCC threshold reference; typically bypassed to GND with a 10 nF capacitor."+ },+ {+ "number": "4",+ "name": "RESET1",+ "type": "input",+ "description": "Active-low reset for timer 1. Driving this pin below ~0.7 V forces the output low regardless of timing state; tie to VCC when not used."+ },+ {+ "number": "5",+ "name": "OUT1",+ "type": "output",+ "description": "Output of timer 1. Push-pull output capable of sourcing/sinking up to 200 mA, swinging between GND and near VCC."+ },+ {+ "number": "6",+ "name": "TRIG1",+ "type": "input",+ "description": "Trigger input for timer 1. A negative-going pulse below 1/3 VCC starts the timing cycle and drives the output high."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for both timers. Connect to system 0 V."+ },+ {+ "number": "8",+ "name": "TRIG2",+ "type": "input",+ "description": "Trigger input for timer 2. A negative-going pulse below 1/3 VCC starts the timing cycle and drives the output high."+ },+ {+ "number": "9",+ "name": "OUT2",+ "type": "output",+ "description": "Output of timer 2. Push-pull output capable of sourcing/sinking up to 200 mA, swinging between GND and near VCC."+ },+ {+ "number": "10",+ "name": "RESET2",+ "type": "input",+ "description": "Active-low reset for timer 2. Driving this pin below ~0.7 V forces the output low regardless of timing state; tie to VCC when not used."+ },+ {+ "number": "11",+ "name": "CV2",+ "type": "input",+ "description": "Control voltage input for timer 2. Allows external modulation of the internal 2/3 VCC threshold reference; typically bypassed to GND with a 10 nF capacitor."+ },+ {+ "number": "12",+ "name": "THR2",+ "type": "input",+ "description": "Threshold input for timer 2. When voltage exceeds 2/3 VCC, the internal flip-flop resets and the output goes low."+ },+ {+ "number": "13",+ "name": "DIS2",+ "type": "output",+ "description": "Discharge pin for timer 2. Open-collector output that discharges the external timing capacitor when the internal flip-flop is set."+ },+ {+ "number": "14",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply voltage for both timers. Operating range typically 4.5 V to 16 V. Bypass with a 100 nF ceramic capacitor close to the pin."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2209290930_HANSCHIP-semiconductor-NE556DRG_C5145392.pdf",+ "pages": 5,+ "sha256": "970a3f304f364539",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "HANSCHIP semiconductor",+ "Package": "SOP-14",+ "Category": "RTC",+ "Pins": "14"+ }+ },+ "variants": [+ {+ "mpn": "NE556DRG",+ "kind": "packaging"+ },+ {+ "mpn": "NE556DRGD",+ "kind": "packaging"+ },+ {+ "mpn": "NE556DRGN",+ "kind": "packaging"+ },+ {+ "mpn": "NE556DRGP",+ "kind": "packaging"+ },+ {+ "mpn": "NE556DRGPW",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "ne556drg"+ ],+ "discovery_pitch": "NE556DRG (HANSCHIP semiconductor) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +196,5 @@ "docs/ne556drg-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }