← Commit history

Initial commit: component/ndp23b0qb-a

Ray ·e3be30a2e4 ·
2 files changed +96
README.mdadded+62
@@ -0,0 +1,62 @@+# NDP23B0QB-A++**NDP** · DC-DC Converters · QFN-20(5x5)++NDP23B0QB-A from NDP, in a QFN-20(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground return. Tie to system GND plane along with PAD1. |+| 2 | GND | power_in | Ground return. Tie to system GND plane along with PAD1. |+| 3 | GND | power_in | Ground return. Tie to system GND plane along with PAD1. |+| PAD1 | GND | power_in | Exposed thermal ground pad. Solder to a large GND copper pour for heat dissipation and low-impedance return. |+| 4 | NC | unconnected | No internal connection. Per layout note may be tied to VIN or GND for easier PCB routing. |+| 5 | NC | unconnected | No internal connection. Per layout note may be tied to VIN or GND for easier PCB routing. |+| 6 | VIN | power_in | Power input, 7.5-30 V (recommended 8-24 V). Decouple with a low-ESR bulk capacitor plus at least two 10 µF (1206) ceramic caps close to the IC. |+| 7 | VIN | power_in | Power input, 7.5-30 V (recommended 8-24 V). Decouple with a low-ESR bulk capacitor plus at least two 10 µF (1206) ceramic caps close to the IC. |+| 8 | VIN | power_in | Power input, 7.5-30 V (recommended 8-24 V). Decouple with a low-ESR bulk capacitor plus at least two 10 µF (1206) ceramic caps close to the IC. |+| PAD2 | VIN | power_in | Exposed VIN pad. Solder to the input-power copper plane to carry input current and improve thermal dissipation. |+| 9 | NC | unconnected | No internal connection. |+| 10 | BST | passive | Bootstrap capacitor node for the high-side gate driver. Connect a 100 nF ceramic capacitor between BST and SW to generate the floating gate-drive supply for the high-side N-MOSFET. |+| 11 | NC | unconnected | No internal connection. |+| 12 | SW | power_out | Switching node connecting the internal high-side and low-side power MOSFETs to the external inductor. Route as a short, wide trace to minimize EMI. |+| 13 | SW | power_out | Switching node connecting the internal high-side and low-side power MOSFETs to the external inductor. |+| 14 | SW | power_out | Switching node connecting the internal high-side and low-side power MOSFETs to the external inductor. |+| PAD3 | SW | power_out | Exposed SW pad. Solder to the inductor-side copper pour to handle switch-node current and aid heat dissipation. |+| 15 | NC | unconnected | No internal connection. |+| 16 | FB | input | Feedback input for output voltage regulation. Connect to a resistor divider from VOUT so that FB = VREF (1.0 V typ, ±2%). VOUT = 1.0 V × (RFB_TOP + RFB_LOW) / RFB_LOW. |+| 17 | CSP | input | Positive input of the output current-sense amplifier. Connect to the load-side terminal of an external current-sense resistor in series with the inductor/output. |+| 18 | CSN | input | Negative input of the output current-sense amplifier. Connect to the output-capacitor side of the external current-sense resistor. |+| 19 | EN | input | Enable input with internal pull-up. Drive high (>1 V) or leave floating to enable the converter; pull below 0.3 V to shut down. |+| 20 | FS | input | Switching-frequency programming pin. Connect an external resistor to GND to set FSW: floating = 130 kHz, 250 kΩ = 180 kHz, 100 kΩ = 250 kHz, 60 kΩ = 300 kHz (up to ~330 kHz). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | NDP |+| Package | QFN-20(5x5) |+| Category | PMIC |+| Pins | 23 |++## Ordering variants++- `NDP23B0QB-A`++## CAD (KiCad official)++- Symbol: `NDP23B0QB-A`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm`+- 3D model: QFN-20(5x5) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [NDP datasheet](docs/ndp23b0qb-a-datasheet.pdf) (14 pp, sha256 `d10929ce6c7f647d`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ndp23b0qb-a-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ndp23b0qb-a",+  "version": "0.1.0",+  "type": "component",+  "description": "NDP DC-DC Converters, QFN-20(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "ndp23b0qb-a"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ndp23b0qb-a.kicad_sym",+    "ndp23b0qb-a.kicad_mod",+    "ndp23b0qb-a.glb",+    "ndp23b0qb-a.step",+    "ndp23b0qb-a.lbr",+    "docs/hero.png",+    "docs/ndp23b0qb-a-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file