← Commit history

Set visibility: public

Ray ·8153b04759 · ·parent a7dca48
1 file changed +9−6
page.json+9−6
@@ -68,19 +68,19 @@         "number": "6",         "name": "VIN",         "type": "power_in",-        "description": "Power input, 7.5-30 V (recommended 8-24 V). Decouple with a low-ESR bulk capacitor plus at least two 10 \u00b5F (1206) ceramic caps close to the IC."+        "description": "Power input, 7.5-30 V (recommended 8-24 V). Decouple with a low-ESR bulk capacitor plus at least two 10 µF (1206) ceramic caps close to the IC."       },       {         "number": "7",         "name": "VIN",         "type": "power_in",-        "description": "Power input, 7.5-30 V (recommended 8-24 V). Decouple with a low-ESR bulk capacitor plus at least two 10 \u00b5F (1206) ceramic caps close to the IC."+        "description": "Power input, 7.5-30 V (recommended 8-24 V). Decouple with a low-ESR bulk capacitor plus at least two 10 µF (1206) ceramic caps close to the IC."       },       {         "number": "8",         "name": "VIN",         "type": "power_in",-        "description": "Power input, 7.5-30 V (recommended 8-24 V). Decouple with a low-ESR bulk capacitor plus at least two 10 \u00b5F (1206) ceramic caps close to the IC."+        "description": "Power input, 7.5-30 V (recommended 8-24 V). Decouple with a low-ESR bulk capacitor plus at least two 10 µF (1206) ceramic caps close to the IC."       },       {         "number": "PAD2",@@ -140,7 +140,7 @@         "number": "16",         "name": "FB",         "type": "input",-        "description": "Feedback input for output voltage regulation. Connect to a resistor divider from VOUT so that FB = VREF (1.0 V typ, \u00b12%). VOUT = 1.0 V \u00d7 (RFB_TOP + RFB_LOW) / RFB_LOW."+        "description": "Feedback input for output voltage regulation. Connect to a resistor divider from VOUT so that FB = VREF (1.0 V typ, ±2%). VOUT = 1.0 V × (RFB_TOP + RFB_LOW) / RFB_LOW."       },       {         "number": "17",@@ -164,7 +164,7 @@         "number": "20",         "name": "FS",         "type": "input",-        "description": "Switching-frequency programming pin. Connect an external resistor to GND to set FSW: floating = 130 kHz, 250 k\u03a9 = 180 kHz, 100 k\u03a9 = 250 kHz, 60 k\u03a9 = 300 kHz (up to ~330 kHz)."+        "description": "Switching-frequency programming pin. Connect an external resistor to GND to set FSW: floating = 130 kHz, 250 kΩ = 180 kHz, 100 kΩ = 250 kHz, 60 kΩ = 300 kHz (up to ~330 kHz)."       }     ],     "provenance": {@@ -228,5 +228,8 @@     "docs/ndp23b0qb-a-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file